Used Operational Task for sale (31,474)

Operating hours: 4,375 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iedjz R Dwwjpfx Ap Djtn Load capacity: 1,600 kg Lifting height: 4,625 mm Free lift: Full free lift Mast: Triplex mast Fork length: 1,200 mm Number of wheels: 3 Operating hours: 4,375 h MACHINE DETAILS Manufacturer: Linde Type: E16 Year of manufacture: 2020 Drive type: Electric Own weight: 3,500 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm Battery year of manufacture: Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage at rest: 50.8 V Battery charger: Not available EQUIPMENT Side shifter 3rd hydraulic valve Full cabin Cabin heater Windshield wiper LED work light, front LED work light, rear Tilt angle display Service valid until: 12/2026 Safety inspection valid until: 12/2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of non-compliance with the collection deadline, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 124

Operating hours: 1,801 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 2,000 kg Forks Fork length: 1,150 mm Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery resting voltage: 24.6 V Operating data Operating hours: 1,801 h Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) certificate valid until: 09/2027 MACHINE DETAILS General Manufacturer: Linde Type: T20AP Year of manufacture: 2022 Dimensions and weight Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm Own weight: 800 kg EQUIPMENT Fronius battery charger Itjdpfsz R D E Usx Ap Don Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 331

Operating hours: 14,594 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Manufacturer: Linde Type: E16L Year of manufacture: 2020 Drive type: Electric Load capacity: 1,600 kg Operating hours: 14,594 h Mast Mast type: Duplex mast Full free lift: Yes Lifting height: 3,145 mm Hydraulics 3rd auxiliary valve: Yes 4th auxiliary valve: Yes, free for fork positioner Side shifter: Yes Battery Battery voltage: 48 V Battery type: 6 PzS Battery capacity: 750 Ah Battery voltage at rest: 51.13 V Inspections and Service Service valid until: 10/2027 UVV (Occupational Safety) certificate valid until: 10/2027 MACHINE DETAILS Own weight: 3,200 kg Overall length: 3,200 mm Overall width: 1,100 mm Overall height: 2,121 mm EQUIPMENT Formerly a Linde full-service machine EVO facelift model Itjdpfx Apjz R Dzco Dsn Color display Tilt angle indicator Semi-cabin Windshield with windshield wiper Roof window LED work light (front) LED work light (rear) Comfort seat Lumbar support Seat heating Battery charger High-quality charger, year of manufacture 2026 All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 t is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 188

Operating hours: 607 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Itjdpfoz R Rc Ujx Ap Djn Load capacity: 1,200 kg Lifting height: 2,400 mm Fork length: 1,150 mm Mast: Duplex free-lift mast Initial lift: capable of lifting 2 pallets simultaneously MACHINE DETAILS Manufacturer: Linde Type: D12AP Year of manufacture: 2020 Operating hours: 607 h Own weight: 1,400 kg Overall length: 2,100 mm Overall width: 800 mm Overall height: 1,660 mm Battery: 24 V, 3 PzS, 375 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 25.0 V Battery water refilling system: Aqua EQUIPMENT Initial lift Folding platform Previously a Linde full-service unit Functional and condition video All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: * Side loading up to 6 t possible with a large forklift truck on site. Loading is at your own risk. * Rear loading via ramp possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. * Collection is only possible after receipt of the payment confirmation by email. * Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. * If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 410

Operating hours: 2,384 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Fork length: 1,150 mm Operating hours: 2,384 h Battery Battery voltage: 24 V Battery capacity: 375 Ah Battery type: 3 PzS Battery year of manufacture: 2019 Battery idle voltage: 24.7 V MACHINE DETAILS Manufacturer: Linde Type: T20AP Year of manufacture: 2019 Own weight: 800 kg Overall length: 1,900 mm Overall width: 800 mm Overall height: 1,000 mm EQUIPMENT Battery charger Previously a Linde full-service unit Functional and condition video available All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Itodpjz R Rd Esfx Ap Dsn Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 452

Operating hours: 11,450 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,095 mm Fork length: 1,200 mm Mast type: Triplex (?) Hydraulic valves: 3rd and 4th valve Number of wheels: 4 MACHINE DETAILS Manufacturer: Linde Type: E30 HL Year of manufacture: 2020 Drive type: Electric Operating hours: 11,450 h Own weight: 6,300 kg Overall length: 3,800 mm Overall width: 1,300 mm Overall height: 2,724 mm Battery Battery voltage: 80 V Battery capacity: 775 Ah Battery manufacturing date: Week 23/2020 Measured battery voltage: 82.3 V Inspections and Maintenance Service valid until: Iodpfxjz R Dv Tj Ap Detn UVV (Occupational Safety) valid until: EQUIPMENT Hydraulic fork positioner Side shifter Tilt angle display Facelift model Former Linde service unit All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is carried out at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In case of delayed collection, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 103

Operating hours: 7,209 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity Load capacity: 1,400 kg Lifting height Lifting height: 1,844 mm Forks Fork length: 1,150 mm Battery Battery type: Lithium-ion Battery voltage: 24 V Battery capacity: 410 Ah Measured idle voltage: 25.5 V Operating data Operating hours: 7,209 h MACHINE DETAILS General Manufacturer: Linde Type: L14AP Year of manufacture: 2022 Own weight: 1,400 kg Dimensions Overall length: 210 mm (?) Overall width: 800 mm Overall height: 1,490 mm Itedpfx Apez R Rfpj Den Inspections and service Service valid until: 09/2027 UVV (Occupational Safety) valid until: 09/2027 EQUIPMENT Folding platform Lithium-ion battery Charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 464

Year of construction: 2021, operating hours: 17,634 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift Mast Mast type: Duplex mast Lift height: 5,495 mm Free-lift mast: Without center hydraulic cylinder Free lift: No Load Capacity and Forks Load capacity: 3,500 kg Fork length: 1,200 mm Hydraulically adjustable forks: Yes Side shifter: Yes Drive Drive type: LPG (liquefied petroleum gas) Diesel drive: No MACHINE DETAILS Machine data Manufacturer: Linde Type: H35T Year of manufacture: 2021 Operating hours: 17,634 h Self-weight: 5,516 kg UVV certificate valid until: Formerly a Linde full-service unit Facelift model Dimensions Overall length: 5,200 mm Overall width: 1,450 mm Overall height: 3,424 mm EQUIPMENT 3rd and 4th hydraulic valve Fork positioner with side shifter Full cabin Air conditioning Heater Windshield wiper Comfort seat with lumbar support Itjdpfjz R Dqwjx Ap Don Seat heating LED work light, front LED work light, rear Road traffic lighting with turn signals Orange warning light Safety light, front Safety light, rear All dimensions are rounded values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. In the event of delayed collection, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 45

Condition: used, machine/vehicle number: H2X391X00341, Year of construction: 2020, operating hours: 15,584 h, load capacity: 2,000 kg, lifting height: 4,625 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 4,625 mm Fork length: 1,200 mm MACHINE DETAILS Isdpfxez Nxg Do Ap Dstn Mast: Triplex mast Lift type: Full free lift Drive type: Liquefied petroleum gas (LPG) Dimensions & Weight Dimensions (L x W x H): 3,600 x 1,150 x 2,121 mm Weight: 3,391 kg UVV certificate valid until: 06/2027 Next service due in: 416 hours Operating hours: 15,584 hours EQUIPMENT Former Linde full-service unit Full cabin Heater Windshield wiper Tilt angle indicator Fork positioner Side shifter LED work light (front) LED work light (rear) Safety light (rear) Comfort seat with lumbar support Seat heating LPG gas cylinder Hydraulically adjustable forks Side shifter Hydraulic valves: 3rd + 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 182

Operating hours: 10,778 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Duplex mast with full free lift Lifting height: 3,760 mm Load capacity: 3,000 kg Fork length: 1,200 mm Hydraulics: 3rd valve Side shifter: included Drive and Battery Drive type: Electric Battery voltage: 80 V Battery capacity: 775 Ah Battery date of manufacture: Week 48/2022 Battery voltage at rest: 84.5 V MACHINE DETAILS General Manufacturer: Linde Type: E30HL Year of manufacture: 2018 Operating hours: 10,778 h Dead weight: 5,800 kg Dimensions Overall length: 3,700 mm Overall width: 1,200 mm Overall height: 2,500 mm Inspections and Service Service valid until: UVV (German accident prevention regulations) valid until: EQUIPMENT Duplex mast with full free lift Side shifter Semi-cabin with windshield wiper Roof panel Lateral fall protection, removable LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat Facelift model with tilt angle indicator All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for trucks with a height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 193 Itjdpfxez R D Ago Ap Don

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Isdpfx Aoz Nn H Hjp Djtn Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: new, functionality: fully functional, power: 10 kW (13.60 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 1,035 kg, empty load weight: 1,305 kg, operation weight: 1,350 kg, lifting height: 2,150 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 08/2026, emission class: euro5, mast type: other, brakes: other, suspension: steel, Year of construction: 2026, operating hours: 2 h, Equipment: additional headlights, adjustable boom, hydraulics, low noise, rubber tracks, standard shovel, Mini Excavator GT JAPAN1000J Crawler Mini Excavator The GT JAPAN1000J mini excavator, in its new and improved version, is a compact machine weighing 1035 kg, designed for precise excavation work in confined spaces. Thanks to its adjustable width of 750–950 mm, it is ideal for narrow passages, private properties, gardens, and urban environments. Perfect for excavation work for installations, foundations, fences, and for clearing and leveling tasks. Kubota D722 engine – reliability and power The machine is equipped with a 3-cylinder Kubota D722 diesel engine with an output of 10.2 kW at 2500 rpm. This engine is known for its smooth operation, low fuel consumption, and high durability. This ensures that the mini excavator delivers stable and efficient performance, even under heavy use. Advanced hydraulic system The GT JAPAN1000J is equipped with a double gear pump with a capacity of 25 l/min and a Load Sensing valve system, which ensures smooth, precise, and energy-efficient operation. The working pressure of 16 MPa guarantees sufficient power for demanding tasks, while the maximum drawbar pull of 19 kN ensures good mobility on difficult terrain. Precision and ease of operation The mini excavator features ergonomic joysticks that enable intuitive and precise control. The swivel boom (54° to the left / 59° to the right) significantly facilitates working along walls and obstacles, while the extendable tracks provide extra stability and adaptation to different working conditions. Compact dimensions and mobility Ijdpfszrqpkox Ap Djtn The total length of the machine is 3005 mm, the height is 2160 mm, and the width is adjustable from 750 to 950 mm. The turning radius at the rear is only 510 mm, which allows operation in very confined spaces. The ground clearance at the rear is 380 mm and the minimum ground clearance is 140 mm, which facilitates driving on uneven terrain. The tracks with a width of 180 mm and a length of 1330 mm provide stability and good grip. Technical data Weight 1035 kg Engine Kubota Configuration 3-cylinder diesel Rated power 10.2 kW / 2500 rpm Maximum drawbar pull 19 kN Type of hydraulic pump double gear pump Main pump output 25 l/min Working pressure 16 MPa Type of control valve Load Sensing valve Fuel tank capacity 15 l Arm digging force 5.5 kN Bucket digging force 6.5 kN Joystick Yes Swivel boom Yes Extendable tracks Yes Travel drive Two travel speeds Bucket capacity 0.02 m³ Travel speed 2.1 / 4 km/h Platform rotation speed 13 rpm Boom swivel angle left 54° / right 59° Grading ability 30° Maximum digging height 3060 mm Maximum dumping height 2150 mm Maximum digging depth 1870 mm Maximum digging radius 3410 mm Maximum reach at ground level 3350 mm Turning radius rear 510 mm Overall length 3005 mm Overall width 750–950 mm Overall height 2160 mm Ground clearance rear 380 mm Minimum ground clearance 140 mm Track width 180 mm Track length 1330 mm

Year of construction: 2025, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 54942, No minimum price – guaranteed sale to the highest bidder! EXW – Dismantling and loading must be organized by the buyer! TECHNICAL DETAILS Nominal test force: 50 kN Test stroke: < 1,400 mm Usable distance between pressure plates: approx. 800 mm Test area width: 500 mm Test speed: continuously variable 0.001–1,200 mm/min Resolution of displacement measurement: ≤ 0.001 mm Diameter of pressure plates: 246 mm Centering bore: 40 mm Thread: M12 Hardness: ≥ 56 HRC Design: Steel, hardened, rotatable at the top and bottom, lockable at 0° Measuring range of the enveloping circle: 30–250 mm Design: Probe with bearing rollers Measurement: Recording under load MACHINE DETAILS Control system: Control system with control computer Test program: Enveloping circle measurement Network: Fast Ethernet, 100 Mbit/s between the control computer and the separately required operating PC Software delivery: USB stick with installation software Documentation: Version and license status not documented separately Last calibration: 08/04/2025 Dimensions & Weight Machine dimensions: approx. 750 × 900 × 1,950 mm Base frame dimensions: approx. 730 × 900 × 700 mm Control cabinet with control computer dimensions: approx. 600 × 600 × 1,900 mm Machine weight: approx. 490 kg Base frame weight: approx. 50 kg Voltage supply: 3 × 400 V AC, 50 Hz, N + PE Type plate power: 3,000 W Connected power: approx. 3 kVA EQUIPMENT Base frame Control cabinet with control computer Rotatable pressure plates Enveloping circle measuring device with probes and bearing rollers USB stick with installation software Compressed air connection: Pneumatic connection with shut-off valve Isdpfxez Tf D Ro Ap Detn Note: The functionality has been tested and confirmed. However, an unresolved error message on the drive prevents further use. The machine is in like-new condition visually. The operating PC is not included in the offer.

Operating hours: 3,077 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Lifting height: 2,844 mm Fork length: 1,150 mm Load capacity: 1,600 kg MACHINE DETAILS General Manufacturer: Linde Type: L16i Year of manufacture: 2019 Operating hours: 3,077 h Service valid until: UVV (occupational safety) certificate valid until: Previously a Linde full-service unit Dimensions and weight Overall length: 2,200 mm Overall width: 800 mm Overall height: 1,915 mm Own weight: 1,300 kg Battery Battery: KW 35/2019 Battery voltage: 24 V Battery capacity: 375 Ah Battery voltage in idle state: 25.1 V EQUIPMENT Initial lift for simultaneous handling of 2 pallets Integrated scale Battery charger Functional and condition video available All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Isdpoz R D H Sjfx Ap Detn Side loading up to 6 tons is possible using a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine per day will be charged for non-timely collection. Outstanding storage fees must be paid in full before collection. Lot number: 344

Operating hours: 4,123 h, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Mast Mast type: Triplex mast with full free lift Lifting height: 4,660 mm Free lift: available Load capacity Rated load capacity: 1,600 kg Forks Fork length: 1,150 mm Side shifter: available Hydraulically adjustable forks: not available Drive and battery Drive type: Electric Battery: 48 V, 4 PzS, 560 Ah Battery year of manufacture: Battery voltage at rest: 49.9 V MACHINE DETAILS General data Manufacturer: Linde Type: R16 Year of manufacture: 2018 Operating hours: 4,123 h Itedpez R D Ddjfx Ap Don Dimensions and weight Overall length: 2,500 mm Overall width: 1,260 mm Overall height: 2,135 mm Own weight: 3,000 kg Inspections and service Service valid until: UVV (German industrial safety) valid until: EQUIPMENT Triplex mast with full free lift Side shifter Rear safety light Comfort seat Formerly a Linde full-service unit All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tonnes is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tonnes and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by e-mail. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 287

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V Iodpfsx Nbzusx Ap Dstn - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, machine/vehicle number: H2X351N03744/30, Year of construction: 2002, operating hours: 15,752 h, load capacity: 3,000 kg, lifting height: 5,900 mm, mast type: triplex, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! Ijdpfx Aez Nvqmjp Dotn The engine was overhauled in 2024! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 5,900 mm Fork length: 1,150 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,300 x 2,650 mm Own weight: 5,100 kg UVV valid until: 10/2026 Drive type: LPG Engine manufacturer: Perkins Engine overhaul: 2024 Operating hours: 15,752 h EQUIPMENT Former Linde full-service unit Load protection grille Full cabin Heater White, non-marking tires Windshield wiper LED work light (front) LED work light (rear) Comfort seat with lumbar support LPG gas cylinder with changeover valve Full free lift Hydraulic fork positioner Side shifter 3rd and 4th valve All dimensions are approximate. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Loading from the rear via ramp is possible for a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not made within the deadline, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 113

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,631 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 125 mm, fuel type: electric, mast type: duplex, fork carriage width: 1,070 mm, fork length: 1,400 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Itjdpfx Aoz Hvl Dep Djn Load capacity: 3,500 kg Lifting height: 3,700 mm Free lift: 125 mm Fork length: 1,400 mm Fork carriage width: 1,070 mm Fork width: 161 mm Fork thickness: 57 mm Fork adjustment range: 560–2,080 mm MACHINE DETAILS Mast type: Duplex Power: 20 kW Front tires Tire type: Non-marking Tire size: 23 × 10–12 Tire condition: 40–60 % Rear tires Tire type: Non-marking Tire size: 18 × 7–8 Tire condition: 20–40 % Battery voltage: 80 V Battery capacity: 625 Ah Battery manufacturer: Exide Battery type: PzS Battery year of manufacture: 2021 Battery condition: 40–60 % Unladen weight: 5,593 kg Overall length: 2,479 mm Overall width: 1,195 mm Overall height: 2,585 mm Operating hours: 3,631 h EQUIPMENT Load protection grid Push fork Side shifter Fork positioner 3rd valve 4th valve Rear work light Front work light Heater Solenoid valve Full cabin Air conditioning CE certificate Non-marking tires LED lighting Seat Noise-reduced hydraulic pump Panoramic mirror Rear dirt guard Load weight indicator Automatic parking brake Dual pedal Air-suspended comfort seat with fabric cover Spring-mounted cabin Reading light Horizontally and vertically adjustable armrest Side battery changer with access pallet including side battery cover I_Site fleet management including PIN code and shock sensor Smart Access Additional cable inside the mast on the left side for the 5th hydraulic function Radio

Condition: excellent (used), power: 98 kW (133.24 HP), gearing type: automatic, fuel type: diesel, color: other, Year of construction: 2006, operating hours: 4,870 h, GVW: 23.000 kg Quick coupler system: Yes Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Itodpfez It T Iox Ap Dsn No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: ready for operation (used), Year of construction: 1962, machine/vehicle number: E 557, functionality: fully functional, pressing force: 40 t, stroke length: 125 mm, table width: 400 mm, table length: 1,000 mm, overall weight: 3,900 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force Max. press force: 40 t Stroke: 125 mm Max. operating pressure: 15.7 MPa Itjdpfsz Izdnex Ap Djn Installation height: 650 mm Stand extension: 400 mm Ram adjustment: 125 mm Work table Table length: 1,000 mm Table width: 400 mm MACHINE DETAILS Machine type: Hydraulic press brake Type: E 40-1000 Year of manufacture: 1962 Factory number: E 557 Total weight: 3,900 kg Condition: Used, fully functional

Condition: ready for operation (used), Year of construction: 1985, machine/vehicle number: 1304, functionality: fully functional, pressing force: 367 t, stroke length: 100 mm, table width: 525 mm, table length: 430 mm, table height: 800 mm, No minimum price – guaranteed sale to the highest bidder! EXW – Buyer is responsible for dismantling and loading! The machine was rebuilt in 2018! TECHNICAL DETAILS Press force: max. 3,600 kN Ram stroke: max. 100 mm Ram adjustment: 40 mm Stroke rate: 40 strokes/min Table area: 430 × 525 mm Table height: 800 mm MACHINE DETAILS Connected power: 7.5 kW Mains connection: 3-phase, 380 V, 50 Hz Control voltage AC: 220 V Control voltage DC: 24 V Main motor power: 7.5 kW Oil capacity: 50 l Ambient temperature: +5 °C to +40 °C Average temperature over 24 h: max. +35 °C Humidity: 30–95 %, non-condensing Altitude: 1,000 m above sea level Noise level: ≤ 70 dB Dimensions & Weight Dimensions (W x D x H): 1,200 x 2,000 x 2,400 mm Space requirement: approx. 1,500 mm Machine weight: 8,000 kg Control cabinet dimensions: 800 × 1,200 × 300 mm Control cabinet weight: approx. 100 kg EQUIPMENT Operating manual Testing information Digital documentation Note: Induction unit is not included in the scope of supply. Iodpfoz Tf Enex Ap Dstn

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), Equipment: cabin, pallet forks, standard shovel, KINGWAY LANDER 810 – Professional Farm Loader with Kubota Engine | 1,400 kg Lifting Capacity | Hydrostatic Drive The KINGWAY LANDER 810 is a powerful and compact farm loader for professional use in agriculture, construction, gardening and landscaping, and municipal operations. Equipped with the proven Kubota V1505 4-cylinder diesel engine, hydrostatic drive, and all-wheel drive, the LANDER 810 impresses with its high performance, low fuel consumption, and maximum operator comfort. With a lifting capacity of up to 1,400 kg, a lifting height of up to 3,225 mm, and a powerful hydraulic system, the LANDER 810 is ideal for daily loading, transport, and material handling tasks. Thanks to its compact design, the machine operates safely and efficiently even in confined spaces. Standard Equipment Enclosed safety cab (ROPS/FOPS) Kubota V1505 diesel engine Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Hydraulic quick coupler Euro attachment Additional hydraulics Float position Electric joystick control Adjustable steering column Suspended comfort seat Rear view camera Radio Heater Ventilation LED work lights front and rear Road lighting Lockable cab Lockable engine hood Lockable fuel tank Opening rear window Heavy-duty axles Boom lowering safety device Technical Data Engine Kubota V1505 4-cylinder diesel engine Displacement: 1,498 cm³ Power: 18.5 kW (25 hp) Max. torque: 94 Nm Rated speed: 2,200 rpm Emission standard: Euro V Water-cooled Electrical System 12 V electrical system 60 Ah battery Drive System Hydrostatic drive All-wheel drive Differential lock 2 travel ranges Maximum speed: 20 km/h Inch pedal Hydraulics Hydraulic flow rate: 60 l/min Hydraulic pressure: 200 bar Hydraulic oil tank: 40 l Hydraulic pump: Bondioli & Pavesi Hydraulic circuit Float position Hydraulic quick coupler Euro attachment Performance Data Maximum lifting capacity: 1,400 kg Maximum lifting height: 2,800 mm Maximum lifting height (extended): 3,225 mm Dump height: 2,200 mm Dump angle: 80° Bucket volume: 0.26 m³ Bucket width: 1,300 mm Climbing ability: 20° Dimensions Length without bucket: 3,600 mm Length with standard bucket: 4,200 mm Width: 1,300 mm Height: 2,300 mm Wheelbase: 1,550 mm Ground clearance: 240 mm Steering angle: 40° Operating weight: 2,620 kg Tires Itodpfx Aozpvt Asp Dsn Standard tires: 31×15.5-15 Agricultural tread pattern optional Turf tread pattern available at extra cost Industrial tread pattern available at extra cost Max. tire pressure: 3.1 bar Product Advantages Original Kubota V1505 engine Hydrostatic drive Enclosed ROPS/FOPS safety cab 1,400 kg lifting capacity Lifting height up to 3,225 mm Powerful hydraulics with 60 l/min Hydraulic quick coupler as standard Euro attachment as standard Bondioli & Pavesi hydraulic pump All-wheel drive with differential lock Compact design High maneuverability Low operating costs Comfortable joystick control Robust steel construction Ideal for daily professional use Warranty and Service 12-month manufacturer's warranty Warranty extension up to 3 years possible Our own mobile service throughout Germany Spare parts directly from our German warehouse Professional workshop and repair service

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg MACHINE DETAILS Battery voltage: 48 V Isdpfxoz S Ntgj Ap Detn Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,300 mm, total width: 2,900 mm, overall weight: 12,000 kg, product length (max.): 4,100 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 105 V Linear was manufactured in 2004. It features a robust CNC control system, HEIDENHAIN iTNC 530, and has a machine weight of approximately 12,200 kg. The required installation space is 5,700 × 4,700 mm, making it suitable for various machining tasks. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 105 V Linear vertical machining centre we have for sale. Contact us for further details. • Required installation space: 5,700 × 4,700 mm • Operating voltage: 400 V Iedpfx Apez S Avue Detn • Frequency: 50 Hz • Rated power: 80 kVA • Rated current: 115 A • Compressed air pressure: 6 bar • External coolant supply: 40 l/min at 2.3 bar • Chip flushing capacity: 100 l/min at 2.3 bar Additional equipment • Chip conveyor (discharge height: 850 mm)

Year of construction: 2020, operating hours: 3,182 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 10465394, MEIKO M-iClean HXL-PW – Double-basket hood dishwasher including stainless steel infeed and outfeed tables with basket guidance. Premium class, from the ongoing operation of an event venue. Itjdpfxeznd U Se Ap Den Outstanding key data according to the machine display: only 3,182 operating hours and 23,991 cycles – exceptionally low for the year of manufacture (screenshot in the images). Commissioned on 27.02.2020, serial number 10465394, software version 6.4.6. Equipment: Double-basket system 2 × 500 × 500 mm, up to 120 baskets/hour; PowerWash with multiple pump power levels; hood automation with automatic basket recognition; detergent and rinse aid dosing; drain pump; free passage height 505 mm; including infeed table with roller conveyor and outfeed table; connection 400 V. Ideal for event venues, catering, canteens, hotels, or large kitchens. Inspection and test run on-site are possible and desired. Commercial sale with a proper invoice (VAT shown). Collection/dismantling by arrangement. Price: €9,900 fixed price, plus VAT.