Used Laser Punch for sale (4,417)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cedpfx Akoz Dvfxsnjhc Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. The machine is in very good technical condition. Chedpfx Aozt A H Reknsc The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. Chsdpfx Ajzlr Syoknjc The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Chodpfxsz Izu To Aknoc Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Chedoz Duvvepfx Aknoc Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Csdpfx Aszr Ha Esknehc Year of manufacture: 2007

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation Chsdpezmgi Nefx Aknec - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Chsdozy Hpispfx Aknoc Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: used, Year of construction: 2024, controller model: , _____ Description: Year of manuf. : 2024 Punch Model:Dynamic Version Max. sheet size without repositioning:3,100 × 1,550 mm Positioning speed (X/Y axes):1,500 mm/s Max. punching speed:900 1/min Laser power:4 kW (IPG) Chjdpfx Aoz Exv Noknjc Revolver :-20 stations, 10 of which are rotatable :-1× MT16 multi-tool station :-1× MT6 multi-tool station, rotatable :-Thread forming station :-Forming station Features :-Automatic die adjustment :-Camera monitoring :-Remote control panel :-Accessory kit :-Nitrogen purge :-Locking cylinder for R-Multitools :-Multithread lubricator, tool lubrication :-Punch part flap :-Small laser part flap :-Large laser part flap :-Scrap conveyor belt

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Chedpfx Akexu Hlgjnjc Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Connection: 70 kW Weight: 16 t Dimensions: 7,000 x 7,400 mm

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine Chjdpfx Ajzv Sarjknjc + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Chjdpfx Akszp D H Denec Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts Codpfxsy Samuj Aknohc - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function Cedpfxjzv Twxo Aknohc - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Cjdpfx Akozfaaljnshc

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Cjdpfx Akjwykcconjhc

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 Chedpfx Asy Saqgoknjc - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl Cedpoz D Th Defx Aknjhc CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Chjdpoypt R Hefx Aknjc Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories - TSU tool changer 300 Automation

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Codpfx Aezd Ulasknehc Accuracy: Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: like new (used), Good parts conveyor belts for TruMatic 7000 / 6000 Chodpfxsu S Ny Ts Aknjc Very good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, laser power: 3,200 W, sheet thickness (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Combined punching/laser operation: 3,000 mm × 1,500 mm Punching operation: 3,000 mm × 1,500 mm Laser operation: 3,000 mm × 1,500 mm Working area without repositioning: Large format Sheet metal thickness, structural steel max.: 8 mm Sheet metal thickness, stainless steel max.: 8 mm Sheet metal thickness, aluminum max.: 4 mm Maximum punching force: 220 kN Maximum punching speed (at 1 mm stroke): 900 strokes/min Maximum marking speed: approx. 2,800 strokes/min Maximum axis speed: 108 m/min Axis speed: simultaneous in X and Y axes Tool magazine: Linear magazine with multi-tools Maximum number of multi-tools: 18 Clamps: 3 Tool positions: 180 Chsdpfx Akszyay Ionsc MACHINE DETAILS Laser source: Trumpf TruFlow 3200 CO₂ laser Laser power: 3,200 W Operating hours (as shown in the photo) Beam on hours: 12,716 h Laser on hours: 73,705 h EQUIPMENT SheetMaster with two large-format tables Automatic scrap sheet disposal onto lifting table

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system Chjdszgfnqjpfx Aknjc ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 15,000 h, punching force: 18 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 230 kg, MACHINE DETAILS Format: Large format Beam operating hours: 15,000 hours Laser operating hours: 59,000 hours EQUIPMENT Sheetmaster Toolmaster Note: The machine will continue to be operational until 07/09/2026! The following data is taken from a manufacturer's data sheet. The seller cannot guarantee the accuracy of the data (the data sheet is attached to the listing): TECHNICAL DETAILS Cjdeza Urgspfx Aknohc Travel range X-axis: 3,050 mm Travel range Y-axis: 1,550 mm Sheet thickness max.: 8 mm Punching force max.: 180 kN Workpiece weight max.: 230 kg

Condition: used, functionality: fully functional, Year of construction: 2005, type of cooling: water, overall weight: 15,000 kg, total length: 10,000 mm, total width: 4,000 mm, total height: 25,000 mm, year of last overhaul: 2024, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, ITEC AG laser cutting system for circuit boards. The system consists of the following components: ITEC AG cell with granite bed, 3-axis Motoman NX 100 robot, vacuum manipulator RIEDEL L 21/8 TR 3.00 cooling system GSW Schwabe AG straightening machine MHR 2.5mm / 1250mm / 7 rollers GSW Schwabe AG coil handling system VRMA 80/76 Chodpozyzzysfx Aknoc The circuit boards are fed from the coil (GSW Schwabe AG, MHR 2.5/1250, general overhaul in 2022) into the straightening machine (GSW Schwabe AG, VRMA 80/76). The PDFs with technical data are attached. The laser portal for the TRUMPF TF is mounted on a solid granite bed, which guarantees absolute repeatability. The Motoman robot picks and places components using a vacuum manipulator and camera. The system has been continuously maintained and is in production-ready condition. Before dismantling, the system was cleaned, and all liquids and coolants were evacuated.