Used Punch for sale (1,669)

Condition: used, Year of construction: 2004, Dimensions (LxBxH): 150 x 65 x 40 cm Manufacturer : Rotex Europe Model: 3242A AL/MS Year : 2004 Type : Rectangular gyratory screener Screen: 5 mm and 30 mm Overall dimensions: 2700 mm x 900 mm Unclogging ball Composite unit : Feed hopper Dimensions: Ø 1300 mm x 700 mm Todpfxovlypqo Aaqjd Vibrating conveyor Manufacturer: Scan-Vibro Year of construction: 2005 Outlet diameter: Ø 200 mm Screw conveyor Manufacturer: Fjordvess Maskinfabrik A/S Type : B-200 Year of manufacture : 2005 Screw diameter : 200 mm Overall dimensions : 1500 mm x 650 mm x 400 mm,

Condition: good (used), Renz Punch 500 Perforator This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Tjdoxk U Hwepfx Aaqod Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: excellent (used), Year of construction: 2015, Machine type: Punching and shearing center * Model: S4Xe.40 * Year of manufacture: 2015 * Manufacturer: Salvagnini Machine type: Sheet metal bending machine * Model: P4L-3220 * Year of manufacture: 2019 * Manufacturer: Salvagnini Machine type: Handling system * Type: SiX-ACN * Year of manufacture: 2015 * Manufacturer: Salvagnini * Technical specifications: Voltage: 400 V * Frequency: 50 Hz Tjdpfx Aajv Tygxjqjd * Phases: 3 * Rated current: 36 A * Short-circuit current: 10 kA * Maximum motor current: 28.7 A * Protection class: IP54

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch Tsdecqxv Tspfx Aaqod 9. Heidelberg SM52 - plate bender - SOLD

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. Todpfjuzv Tzjx Aaqod SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Tedpfxexk U Hqo Aaqed Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg Todpfx Aownhd Hsaqsd - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2017, SheetMaster Tedpoxrnttefx Aaqod toolmaster Max. cutting force: 220 kN Price on request

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,177 h, General Data Measurements width 6650 mm Measurements depth 2700 mm Measurements height 2980 mm Machine weight 15000 kg Control Unit Brand FAGOR Model 8070 Main Drive Punching force 300 kN Number of axis 4 Movement Tsdpoxqta Asfx Aaqod X-Axis Movement 1600 mm Y-Axis Movement 1250 mm Turret Number of tool slots 4 Tools Number of station 27 Max Material Thickness Steel 0.5–5 mm Media Main electronic connection 400 V / 50 Hz Power consumption 25 kVA This 4-axis DANOBAT P1317 turret punch press was manufactured in 2004. It features a punching force of 300 kN, a maximum sheet thickness of 5 mm, and can perform up to 750 strokes per minute. The machine includes a Fagor 8070 CNC control, 27 turret stations, and 4 auto-index stations. Dimensions are 2,700 × 6,650 × 2,980 mm, and it weighs approximately 15,000 kg. Consider the opportunity to buy this DANOBAT P1317 turret punch press. Contact us for more information. Application Types Punching

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Tjdpjfuakcsfx Aaqsd Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: used, 1 piece PEDDINGHAUS HYDRAULIC 502 punching machine with digital display PEHU 101 and roller conveyor approx. 10m long, as per pictures and inspection, self-dismantling required. Colour: green. Condition: used. Payment method: advance payment by bank transfer. Storage location: Hall 2 + storage rack in the outdoor area. Shipping: Collection only – no shipping offered for this item! Tedpfxexrcvve Aaqsd

Condition: excellent (used), Year of construction: 2000, Model ... Vipros 20-50-50 Tjdpoxtu Nwsfx Aaqsd Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: used, total length: 2,200 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 3.000 kg Price: On request Iron worker, punch press and section shear  Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70/SD Capacity: 70 ton Schear round: 45mm Schear beam: 45mm Schear plat: 450x15mm Notching: 250x6mm Incl. multiple punches Machine-afmetingen: 2200x1000x2000mm Machine-weight: 3000kg Tjdpfxswnhi Nj Aaqed - Documentation available: No - Transport dimensions: 2200mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 3000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2010, Punching force: 220 kN Max. sheet weight: up to 280 kg Price on request Tjdpfxoxrnf Ae Aaqed

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Travel range X: 2580 mm Travel range Y: 1270 mm Punching force: 30 tons Including tools Todpfx Ajxphwysaqjd

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Simple operator control Quick, reliable grinding of all standard tooling Tjdpfxsfuai Ue Aaqsd Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: good (used), Year of construction: 2000, Punching press Manufacturer: EHT Model: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Max. material thickness: 8 mm Punching force: 30 t Tedpsul S Eajfx Aaqed Turret with 46 tool stations, including 4 index stations size D 3 programmable clamps Metal table Used exclusively in single-shift operation Including WILSON TOOL tooling

Condition: used, Year of construction: 1996, total length: 1,600 mm, total width: 1,100 mm, total height: 1,500 mm, Empty weight: 500 kg Capacity bar: 30mm Capacity strip: 300x10mm / 200x13mm Punch: diameter 28 in 13mm - Year: 1996 - Documentation available: No - CE marking present: Yes - Serial number: 4759 - Motor power: 2.2kW - Table width: 450mm - Table length: 800mm - Ram width: 60mm - Ram length: 45mm - Model: Hydraulic - Max. stroke: 80mm Tedpfsw Duwrjx Aaqed - Power: 45.0ton - Transport dimensions: 1600mm x 1100mm x 1500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, Large format SheetMaster GripMaster Tjdpfx Aajxrmalsqed ToolMaster Price on request

Year of construction: 1997, condition: good (used), Used fully serviced and good condition Trumpf 500r cnc punch press for sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale Fully serviced Machine capable of taking multi tool Complete with tool holders and tools including multi tools Complete with Retractable clamps 3metre x 1.5metre sheet without reposition. Additional extras with the machine: Cabinet full of tooling Multitool Todpohtfp Tsfx Aaqod Multiset – tool setter Quickload Quick sharp tool grinder Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1997

Condition: used, Year of construction: 1998, total length: 2,300 mm, total width: 1,100 mm, total height: 2,000 mm, Empty weight: 1.500 kg Price: On request Capacity bar: 45mm Todpfxew Dvghs Aaqod Capacity strip: 450x15mm Punch: diameter 40 in 14mm - Year: 1998 - Documentation available: No - CE marking present: Yes - Serial number: 8350 - Table width: 640mm - Table length: 1000mm - Ram width: 50mm - Ram length: 100mm - Model: Hydraulic - Max. stroke: 80mm - Power: 80.0ton - Transport dimensions: 2300mm x 1100mm x 2000mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: excellent (used), Quality used Trumpf Trumatic 500R CNC Punch Press for sale Tedpfxeh Nf Upj Aaqed A late Trumpf 500 just before the 5000r 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2001 Fully serviced With manuals Good condition and be seen working in production Complete with: · Capable of taking multi tool a good selection of tooling available along with multi tools

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Tjdpsw Ryxmefx Aaqjd Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - Power: 70.0ton - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2000, condition: excellent (used), very clean / low hours used Trumpf Trumatic 500R CNC Punch Press for sale Todpfsng Al Aex Aaqjd 2.5metre x 1250mm sheet metal before reposition 1300mm throat New / Year 2000 Fully serviced With manuals Good condition and can be seen working in production Complete with:

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Price: On request Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting Todpfx Ajwraazeaqjd - Year: 2017 - Documentation available: Yes - CE marking present: Yes - Serial number: 155976 - Motor power: 4.0kW - Model: Hydraulic - Power: 60.0ton - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum