Used Sprouts Punch for sale (1,693)

Condition: used, Year of construction: 2004, Dimensions (LxBxH): 150 x 65 x 40 cm Manufacturer : Rotex Europe Model: 3242A AL/MS Year : 2004 Type : Rectangular gyratory screener Screen: 5 mm and 30 mm Overall dimensions: 2700 mm x 900 mm Unclogging ball Composite unit : Feed hopper Dimensions: Ø 1300 mm x 700 mm Vibrating conveyor Manufacturer: Scan-Vibro Year of construction: 2005 Outlet diameter: Ø 200 mm Kedpfjvlypqox Afksdu Screw conveyor Manufacturer: Fjordvess Maskinfabrik A/S Type : B-200 Year of manufacture : 2005 Screw diameter : 200 mm Overall dimensions : 1500 mm x 650 mm x 400 mm,

Condition: good (used), Renz Punch 500 Perforator This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Kjdjxk U Hwopfx Afkjdu Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: excellent (used), Year of construction: 2015, Machine type: Punching and shearing center * Model: S4Xe.40 * Year of manufacture: 2015 * Manufacturer: Salvagnini Machine type: Sheet metal bending machine Kdodev Tygxjpfx Afkou * Model: P4L-3220 * Year of manufacture: 2019 * Manufacturer: Salvagnini Machine type: Handling system * Type: SiX-ACN * Year of manufacture: 2015 * Manufacturer: Salvagnini * Technical specifications: Voltage: 400 V * Frequency: 50 Hz * Phases: 3 * Rated current: 36 A * Short-circuit current: 10 kA * Maximum motor current: 28.7 A * Protection class: IP54

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD Kjdpscqxv Tjfx Afksdu

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. Kodpeuzv Tzjfx Afkodu SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Kdodpfx Afsxk U Hqoksu Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Kjdpfxexpkkvo Afkjdu Material thickness x width: W 780 mm Max Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Condition: good (used), Year of construction: 2004, Used CNC punching machine from Finn Power Type: C5 Ksdpfsxphwysx Afkodu Travel range X: 2580 mm Travel range Y: 1270 mm Punching force: 30 tons Including tools

Year of construction: 2005, condition: ready for operation (used), Control Unit Kdedpfexn Uxnjx Afkou Brand FANUC Model 180i-PB Movement X-Axis Movement 2500 Y-Axis Movement 1270 This AMADA EM2510NT was manufactured in 2005. A robust turret punch press, it features a FANUC 180i-PB controller, punching force of 200 kN, and can handle sheet thickness up to 6.3 mm. Its large working area includes X-axis movement of 2500 mm and Y-axis movement of 1270 mm. Consider the opportunity to buy this AMADA EM2510NT turret punch press. Contact us for more information about this machine. Application Types Punching

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Kdedpfxoxn T Sms Afksu Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Year of construction: 1968, condition: used, Peddinghaus hole punch year of construction '68 Kdodpfx Afjccqwlskju Hole punch 225 B 100 GJ128 special model - large delivery With many accessories

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Kdsdpsw Hlztjfx Afkeu Storage location: 54634 Bitburg, loaded free, unpacked Handover in as-inspected condition, without guarantee or warranty

Condition: good (used), machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Stroke rate 40 strokes/min Projection 762mm Arbeitshöte 1110mm Kjdpsd Hxrtofx Afksdu

Condition: good (used), Year of construction: 2027, Large format, machine no.: A0060A0763. Control system: Trumpf/Siemens 840 D. Max. punching force: 220 kN. Max. sheet thickness: 8 mm. Max. punching force: 220 kN. Simultaneous X/Y axis speed: 116 m/min. Punching stroke rate: 1,000 strokes/min. Marking stroke rate: 2,800 rpm. 21 tools on 4 tool holders. Max. working width: 3,000 mm. Support table, custom-made. Support table with vacuum lifter. Working width extended to 6,000 mm in manual mode. Sensor-based stripper monitoring. Light sensor on the punching head. Compressed air connection: 7-14 bar. Equipped with Gripmaster, manufacturer: Trumpf, serial no.: 0415045, retractable. Chip conveyor, manufacturer: Schlepp. Cooling water unit. Tool spray lubrication. Control cabinet. Automation: Trumpf SheetMaster, year 2007, length approx. 10,500 mm. Vacuum lifter. Stacking system, manufacturer: Stopa, type HZIE-501305, year 2007, load capacity 3,000 kg. Stacking system, manufacturer: Stopa, type HZIE-501300, year 2007, load capacity 3,000 kg. Kjdpfx Aoxl Dypefkedu

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Media Kdsdpowfiifjfx Afkou Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: excellent (used), Year of construction: 2015, Murata Muratec Wiedemann 'M2048TS' 200kN Punch Capacity Turret Sheet Metal Punch Press with Muratec CNC Control Kodpfx Asxnb Ivjfkjdu CNC Servo Motor Driven Ram; 1,250mm x 2,500mm Sheet Capacity (with no repositioning); Maximum Punch Thickness 6.35mm Mild Steel; Stroke Approx 160mm; 5.5kW Motor; 44 Number of Tool Stations x 4 Index; Steel Ball Table; Crash Sensor; Foot Switch Control; S/No. 14KX463570001. Modular Machine Guard Caging with Omron F3SJ Type Safety Light Curtain; Weight of Machine Approx 12,000 Kilos; Footprint Approx 3,800mm x 7,000mm; Plus Large Quantity of Tooling in (2) Steel Cabinets; Line Voltage 240V; Machine Voltage 415 Volt; Wiedemann Tooling.

Condition: used, Year of construction: 2005, Used CNC punch press Finn-Power, type F6 SV, built in 2005 Press force: 300 kN Max. workpiece width: 4061 mm Max. workpiece length: 1528 mm Max. workpiece thickness: 8 mm Max. workpiece weight: 200 kg X/Y speed chuck: 80 m/min/60 m/min Turret head positions: 20 Turret head speed: 30 rpm Travel speed: 100 m/min Oil tank capacity: 330 l Max. operating pressure: 300 bar Dimensions X/Y/Z: approx. 5900 mm, 6300 mm, 2500 mm Weight: approx. 13500 kg Control system: Siemens Sinumerik 840D The machine table has been extended. Ksdjwayzujpfx Afkodu (Without machine housing)

Condition: used, total length: 1,900 mm, total width: 950 mm, total height: 1,800 mm, Empty weight: 2.150 kg Price: On request - Maximum capacity (⌀ x thickness): 28 mm x 20 mm - Strokes per minute (at 20 mm stroke): 38 - Working height: 890 mm - Largest hole (optional): 38 mm - Max. bar bending: 250 x 12 mm - Max. sheet bending: 500 x 3 mm Kjdpfoxhcfpjx Afkjdu - Max. angle cutting (90°): 130 x 13 mm - Max. angle cutting (45°): 70 x 10 mm - Notching (material thickness): 10 mm - Documentation available: No - CE marking present: Yes - Control: Teach-in - Motor power: 7.5kW - Table width: 350mm - Throat depth: 355mm - Table length: 600mm - Ram length: 40mm - Model: Hydraulic - Max. stroke: 55mm - Power: 80.0ton - Transport dimensions: 1900mm x 950mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 47885/05, pneumatic punching of window profiles Ksdjff Apispfx Afkjdu Stroke 20 mm

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours 5 kW resonator Kdedpfswd Ng Uex Afkeu Annual maintenance by Trumpf

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 7360 Measurements depth 6750 Measurements height 2310 Machine weight 12960 Control Unit Brand SIEMENS Model Sinnumeric 840 Movement X-Axis Movement 2500 + R mm X-Axis Rapid Traverse 100 m/min Kedpfx Asxn Dldofkedu Y-Axis Movement 1250 mm Y-Axis Rapid Traverse 75 m/min Max Material Thickness Steel 6 mm Stainless steel 3 mm This Durma TPL93 turret punch press was manufactured in 2019. It's a robust choice for precision punching operations. Consider the opportunity to buy this Durma TPL93 turret punch press. Contact us for more information. Application Types Punching

Condition: excellent (used), Trumpf CS 20 copier punch Manufacturer: Trumpf Kdjdpevmrcrofx Afkju Type: CS 20 Control unit: conventional Incl. various accessories as per photos Year of construction: 10/1976 Weight: approx. 6000kg Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse, plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Year of construction: 1985, condition: used, CNC RASKIN RT75 turret punching machine for sheet metal processing In addition a very extensive punching tool assortment.(see photos) The machine is in good condition and is sold for lack of space. Kedpfeccl N Sjx Afkjdu The Lista drawer cabinets are not included in the offer, but can also be purchased for an additional charge. There is also a software available which is not included separately. Travel X 750mm Travel Y 1000mm Stations 16 Machining up to 6mm aluminum Machining up to 6mm steel Machining up to 3mm CNS

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,000 h, laser power: 2,000 W, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, workpiece weight (max.): 120 kg, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame Kdjdpfx Ajw Au Eaefkou - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Year of construction: 2014, condition: ready for operation (used), Movement X-Axis Movement 1200 Kedjxfmlbjpfx Afkjdu Y-Axis Movement 730 Z-Axis Movement 650 This 3-axis MICROCUT V-30 Challenger was manufactured in 2014. It features a Heidenhain 530 control system and a high spindle speed of 18,000 rpm. The machine offers extensive axis travels with X-Axis at 1,200 mm, Y-Axis at 730 mm, and Z-Axis at 650 mm. With 25,915 machining hours, consider the opportunity to buy this MICROCUT V-30 Challenger turret punch press. Contact us for more information about this machine. Application Types Punching