Used Punching Crucible for sale (1,597)

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately We have two more Gietz models. Please ask for an offer. Fjdpfx Aorbhd Tel Usgh If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Fodpjx Dilhofx Al Ujgh

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: A/18031, SCHULER - MSP2-800- 4,5x1,8-400 Kapasite: 800 ton Hava Tüketimi: 30 m³/saat Güç: 296 kW Üst Tabla Ebatları: 4500 mm x 1700 mm Alt Tabla Ebatları: 4500 mm x 1800 mm Pres Yükseklik: 7,5 m Pres En: 6,50 m Pres Genişlik: 4,50 m Fodpjzxqz Tjfx Al Ujgh Dakikadaki Vuruş Sayısı(maksimum): 70 spm Çalışma Reglajı: 300 Kurs Değeri: 80-360 Used machine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 11,800 h, laser power: 3,200 W, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, No minimum price – guaranteed sale to the highest bidder! Includes SheetMaster, ToolMaster, GripMaster! TECHNICAL DETAILS Laser power: 3,200 W Laser type: CO₂ laser TruFlow 3200 Combined punching/laser working area: 3,000 × 1,500 mm Punching mode working area: 3,000 × 1,500 mm Laser mode working area: 3,000 × 1,500 mm Max. sheet thickness, structural steel: max. 8 mm Max. sheet thickness, stainless steel: max. 8 mm Max. sheet thickness, aluminum: max. 4 mm Max. punching force: max. 220 kN Max. punching stroke rate at E = 1 mm: max. 900/min Max. marking stroke rate: max. approx. 2,800/min Max. number of multi-tools with 3 clamping units: max. 18 Tool capacity: 180 tools Max. axis speed X/Y simultaneously: max. 108 m/min MACHINE DETAILS Operating hours: 11,800 h Laser on time: 42,100 h EQUIPMENT SheetMaster Fgsdsz Izu Tspfx Al Ueh ToolMaster GripMaster Large-format working area without repositioning Linear magazine with multi-tools SheetMaster with two large-format tables Automatic scrap sheet removal to lifting table

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 30282, control type: manual, punching force: 40 t, punching diameter: 32 mm, stroke rate (min.): 25 1/min, sheet thickness (max.): 10 mm, oil tank capacity: 50 l, overall weight: 1,400 kg, Equipment: CE marking, emergency stop, foot remote control, FICEP 401 Serial number 30282 Year of manufacture 2008 Ficep hydraulic single-punching machine Model 401 Punching force 40 tons / 400 kN Maximum standard thickness 10 mm (steel) Punching diameter 32 mm Maximum diameter for material thickness 32 mm x 10 mm Throat 510 mm Maximum punching speed (strokes per minute) 25 spm Maximum punching stroke 40 mm Oil tank capacity 50 liters Working height 950 mm Dimensions: L 695 mm x W 1410 mm x H 1610 mm Motor power 4 kW / 5.5 HP Machine weight 1.4 tons Fsdoz N Al Djpfx Al Ujgh Safety systems The machine complies with CE directives Includes a selection of new punch and die sets for round holes.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, punching force: 22 t, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Punching force: 220 kN Sheet metal thickness: 8 mm Sheet metal thickness for stainless steel: 4–6 mm Working area: 2,535 × 1,280 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Number of stations: 18 Fsdpfxez Izquo Al Ujgh Number of clamping jaws: 3 Number of tool cassettes: 4 pcs Part chute for parts up to: 500 × 500 mm MACHINE DETAILS TFT color screen: 10.4" Floppy disk drive: 3.5" EQUIPMENT Rotatable tool holder Automatic repositioning system with pressure plate Automatic tool changer with 18 stations 3 clamping jaws Programmable part chute for parts up to 500 × 500 mm Programmable pressure plate with pre-selectable clamping force Good parts container Tool spray lubrication 2nd lubricant tank Punch scrap extraction Chip bin Quick shut-off for hydraulics Order table TFT color screen 10.4" 3.5" floppy disk drive Graphic programming ToPs 2000 RJ45 network connection 2-beam safety light curtain Network connection including installation Multitool control Repositioning cylinder 4 tool cassettes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 38,149 h, controller model: Bosch MTX compact, laser power: 4,000 W, punching force: 22 t, sheet thickness (max.): 8 mm, Includes SheetMaster & GripMaster! Fedpfxez Nn H Hs Al Usgh TECHNICAL DETAILS Laser power: approx. 4,000 W Punching force: max. 220 kN Sheet thickness: max. approx. 8 mm Working area, laser operation (X × Y): approx. 2,540 × 1,280 mm Working area, punching operation (X × Y): approx. 2,540 × 1,370 mm MACHINE DETAILS Control system: Bosch MTX compact Dimensions & Weight Footprint (L × W): approx. 7,950 × 6,700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA Operating hours: 38,797 h Beam on-time: 38,149 h EQUIPMENT Active dies SheetMaster GripMaster

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Fgsdpfx Aoz Nhx Ael Uoh Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Fgsdpfxez E Sa Ie Al Ush Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Fodpfx Aoy Udrmsl Uogh Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Condition: good (used), functionality: fully functional, Year of construction: 2008, TRUMPF TruMatic 7000 – 1300 Fedpfx Asz Dumzsl Uegh Year of manufacture: 2007 Includes active dies! Includes Sheetmaster and Gripmaster Machine operating hours: 38,797 h Beam on-time: 38,149 h Laser power: approx. 4000 Watts Max. punching force: 220 kN Working area (laser operation): approx. 2540 x 1280 mm Working area: punching area: approx. 2540 x 1370 mm Control system: Bosch MTX compact Max. sheet thickness: approx. 8 mm Space requirement: approx. 7950 x 6700 mm Machine weight: approx. 23,000 kg Total connected load: 87 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, EDEL - Stanzprofi 250 / Punching machine -CE marking -Year of manufacture 1994 -Depth stop approx. 250 mm -Length stop approx. 500 mm -Working area 1000x500 mm -Tool area up to max. 100 mm -Material thickness up to approx. 10 mm -Punching example - diameter 70 mm in 3 mm sheet metal -Punching example - diameter 25 mm in 8 mm sheet metal -Punching sequence / time interval 1 second -Drive power 1.5 kW Fgedpfx Ajz Dq S Tjl Ujh -Table dimensions approx. 1350x700 mm -Operating pressure 6 bar -F-Max. 250 KN / (25 MP) -Various punching dies -Machine feet -Documentation Dimensions approx. 1.6x2x1.8 meters / Weight approx. 1400 kg Subject to errors and omissions.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 118, punching force: 28 t, total height: 2,110 mm, total width: 4,500 mm, total length: 4,050 mm, sheet thickness (max.): 4 mm, type of input current: three-phase, travel distance X-axis: 9,999 mm, travel distance Y-axis: 1,000 mm, workpiece weight (max.): 200 kg, overall weight: 9,200 kg, input current: 35 A, input frequency: 50 Hz, input voltage: 400 V, Equipment: safety light barrier, We offer this used Boschert Compact Rotation-Index drilling and milling machine, manufactured in 2005. Manufacturer: Boschert Model: Compact Rotation-Index Year of manufacture: 2005 Condition: used Machine type: drilling and milling machine Fgsdsz N Ay Uspfx Al Ujh If you have any further questions or require more information, please send us a message or call.

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Fedpoz E R S Asfx Al Usgh Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: good (used), functionality: fully functional, Technical data: Fodpfx Alsz H Adae Uogh Weight: 3.5 tons Punching force: 1000 kN Reach: 760 mm Can punch, for example, a 40 mm hole in 22 mm steel ...various punching tools... Special price: EUR 4,990.00 net...

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production using progressive dies with variable stroke rates of 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feed, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, it features a Siemens-made Bruderer U control system. The machine is partially functional: The pushbuttons responsible for the two-hand operation respond with a delay or not at all in setup mode when feeding the material, which makes the material feeding process time-consuming. The machine's spring dampers are worn out, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the discs are brittle and breaking off. The UVV inspection for 2025 has been carried out, as has the annual maintenance for 2025. Fodpfxez H H Dqs Al Uogh Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 KVA Power supply: 400V / 50Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but remains connected so that it can be started in an emergency. Dismantling and removal are planned for the end of December, as a crane will already be on-site by then and the machine can be loaded.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Fgjdpfxszxzage Al Ush Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20,580 h, punching force: 41 t, sheet thickness (max.): 2 mm, CNC punching machine manufactured in 2013. This Pivatic Punching Line PCC80-e TT HT is designed for serial production of flat sheet metal parts, featuring a punching force of 400 kN and a maximum coil weight of 5,000 kg. The line includes two punching sections for flexible and repetitive operations. If you are looking to get high-quality punching capabilities, consider the Pivatic Punching Line PCC80-e TT HT machine we have for sale. Contact us for further details. • Application: Serial production of flat sheet metal parts (panels, brackets, enclosures, electrical cabinet parts, etc.) requiring holes, cut-outs, and notches • Process flow: Coil → uncoiling → straightening → positioning → TT punching → HT punching → part cutting → discharge/stacking • Technical specifications: • Sheet width: 60–830 mm • Sheet thickness: 0.5–2.0 mm (version available for up to 4.0 mm) • Maximum coil weight: 5,000 kg • Installed power: 20 kW • Power supply: 3 x 400 V + PE • Frequency: 50 Hz • Punching system: • TT (Thick Turret): CNC punching with standard cassette-type tools for flexible holes/cut-outs/contours • HT (Hard Tool): Second punching section using dedicated tooling for repetitive operations • Space requirements: • Main line footprint: 17.5 x 5.5 m • Additional space for scrap: 1.5 m • Additional space for HT section: 1.55 m • Machine condition: Fully operational and in production; inspection and trial possible Additional equipment • Included: • Coil positioning carts • Coil uncoiler • Sheet straightener • Control panel for uncoiling/straightening unit and coil carts • Main control panel • Tilting conveyor for selectable product discharge • Transport and stacking module • Safety system with fixed guards and photoelectric barriers • Control cabinet with hydraulic power unit • Tool cassette carts • Hard Tool transport and storage station • Not included: • Punching tools • Tool cassettes Fgsdpezynlxjfx Al Ueh • Robot shown in some photos

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 5480, EUROMAC XT FLEX 12S 1500/30-2500 CNC punching / nibbling machine. Technical data: - Year of construction: 2022 - Serial number: 5480 - Max. punching force: 30 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 - Chute door for extraction of parts up to 1000x1500 mm, with part detection Fgodpsz Aaw Sjfx Al Ujh Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, overall weight: 2,000 kg, input voltage: 400 V, SENTE Makina TFWSI-1600 HVAC machine, designed for the production of large-diameter ventilation ducts. Model: TFWSI-1600 Pipe diameter range: Ø100 – 1600 mm Material: galvanized steel, aluminum, other sheet metal Material thickness: approx. 0.4 – 1.0 mm (depending on the configuration) Production speed: up to approx. 50 m/min Fgjdsz D Ippspfx Al Ueh Cutting: pneumatic rotary knife Control: PLC with touchscreen panel Power supply: 3-phase Year 2023, as new condition.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Magnopro I-Cut 7550” die-cutting machine Item for sale: 1 x Magnopro I-Cut 7550 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A video recording of a functional test will be made for you prior to dispatch or collection. Fgodez I Tguopfx Al Ujh For further information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Max. plate dimension ... 1250 x 2500 mm Max. plate width ... 6 mm X axe max. ... 3085 mm Y axe max. ... 1650 mm Fodpfx Aljz I Sq Sj Uegh Max. force ... 220 kN 3200 W Machine dimensions ... 6100 x 6760 x 2230 mm Machine weight ... 14565 kg

Condition: used, Year of construction: 2013, UNIMAC Inner Line Punching Machine (2013), Table Dimensions 2000 x 900 x 600mm, Cycle Time 30 Seconds Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Fsdoz I Sbwopfx Al Usgh

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Fgedez Nyvyopfx Al Ujh Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 5135, EUROMAC STX FLEX 6 1500/22-2500 CNC punching / nibbling machine. Fgjdpjz Aarcefx Al Ush Technical data: - Year of construction: 2018 - Serial number: 5135 - Max. punching force: 22 t - Working range X axis: 2500 mm - Working range Y axis: 1500 mm - Multitool holders included: XMTE6 and XMTE10 Machine is located in Ivanjica, Serbia. Further information, additional photos and inspection on request.