Used Laser Punching Machine for sale (65,993)

Condition: used, Year of construction: 2013, operating hours: 97,817 h, machine/vehicle number: S0631C0211, controller model: Simatic IPC627, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Note: The machine indicates an error, which suggests a defect in the beam source. The replacement parts recommended by Trumpf cost approximately €30,000. TECHNICAL DETAILS Working Area Travel range X-axis: 3,000 mm Travel range Y-axis: 1,300 mm Travel range Z-axis: 600 mm Travel range B-axis: ±135° Travel range C-axis: n × 360° Working height: 605 mm Laser Model: TruDisk 3001 Laser power: 3,000 W Scanning frequency: 10 Hz–100 kHz Axis Speeds Simultaneous axis speed: max. 173 m/min X-axis: max. 100 m/min Y-axis: max. 100 m/min Z-axis: max. 100 m/min B-axis: max. 90 rpm C-axis: max. 90 rpm Accuracy Smallest programmable path increment: 0.001 mm Positioning deviation, linear axes X/Y/Z: max. 0.03 mm Positioning deviation, rotary axes B/C: max. 0.005° Positioning error, linear axes X/Y/Z: max. 0.08 mm Ledpfx Afez Dvfxsuert Positioning error, rotary axes B/C: max. 0.015° MACHINE DETAILS Control and Data Processing Control model: Simatic IPC627 Hard disk storage: 60 GB Color monitor: 12" TFT Network speed: 100 Mbit/s Modem: 56 kBaud/s Pneumatics and Cutting Gas Connection pressure: min. 6 bar Connection pressure: max. 14 bar Compressed air consumption, machine: approx. 30 Nm³/h Compressed air consumption, short-term: max. 40 Nm³/h Cutting gas working pressure: max. 20 bar Electrical Connection Base machine: 47.0 kVA Laser unit TruDisk 3001: 19.5 kVA Laser unit TruDisk 4001: 27 kVA Cooling unit TruDisk 3001: 9 kVA Cooling unit TruDisk 4001: 12 kVA Operating hours: 97,817 h EQUIPMENT Hard disk with RAID controller USB interface Ethernet network connection RJ-45 connector Support for ET BEUI, TCP/IP, Novell Server, and NTFS file system Solid-state laser from the TruDisk series Fast rotary changer with tooling and control system Scrap conveyor for continuous removal of cut-outs and scrap grids

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Year of manufacture: 2007 Ljdpfszr Ha Ejx Afuert

Condition: good (used), functionality: fully functional, Year of construction: 2017, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control system: Basic Rexroth IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Closed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamping jaws and tools - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping beam - Foot pedal for clamping jaw closure - Beam protection - Dividing chute on the right - Part flap on the left - Sensor for part flap - Work area lighting - FocusLine - Protective tool TRUMPF Laser - Solid-state laser TruDisk 3001 with one laser beam cable (LBC) output - LBC according to standard layout (10 m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser beam cable (LBC) The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (lasers covered under 6A005). Compact cutting unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch head - Delta Drive - Rotatable mono-tool holder - Programmable clamping beam position - Tool length compensation - Spray lubrication for the punch - Scrap extraction - Forming function - Stroke counter for the punch Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Teleservice interface via Internet - Automatic shutdown including wake-up function - Program management - Production plan Data transfer - USB interface - RJ45 network connection - Central Link Safety - CE marking Lrsdpfx Aszy Hpiefuet - Multi-beam light curtains - Protection against scattered radiation Extended laser equipment - Copper cutting package - Brass cutting package Extended punching equipment - MultiTool function - MultiBend function - Thread forming function with thread counter - Signing/fast beading function - Engraving function - Deburring and rolling technology function - Adaptive stroke calibration - Spray lubrication for the die and level monitoring - Smart Punch Monitoring Part removal - Integrated sorting function for dividing chute - Sensor for dividing chute - Container track for 4 standard containers - Containers supplied by the customer Special sheet metal processing - Brush tables - Loading and unloading aid for brush tables Options Compact dust collector - CO2 extinguishing system for the compact dust collector Data transfer - Wireless operation point SheetMaster Compact 2500x1250mm (AK05) - Suction frame - Unloading trolley for scrap grid and microjoint sheets - Loading station with spreader magnet for separating sheets - Double sheet detection - Vacuum sensor - 2nd operator station for loading and unloading - Compact installation (double-wing swing doors) - Peeling system

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, Options: ACB, BendGuard for manual bending, HQ version, interface to 2nd machine Lredpfxjwykccs Afust

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 12,000 W, working length: 2,030 mm, working width: 4,020 mm, power: 12,000 kW (16,315.44 HP), type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, X-Axis Travel(mm）: 2050 Ledpfx Afjwxaq Teuert Y-Axis Travel(mm）: 4050 Z-Axis Travel(mm) ：270 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 170m/min Maximum Acceleration: 2.5G

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly well-suited for demanding series production. The machine offered here is a demonstration model, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. It includes a comprehensive set of tools. It can be tested under power. Operating mode: Servo punching / laser cutting Punching force: 294 (30) kN (t) Laser power: 3000W Max. processing size (punching): 1600 x 3000 mm Max. processing size (cutting): 1500 x 2500 mm Max. material thickness: 6.35 mm (sphere) / 3 mm (brush) Max. punching diameter: 88.9 mm Stroke rate: 2000 cpm Punching frequency (1mm pitch): 700 cpm Punching frequency (25.4mm pitch): 400 cpm Accuracy (punching/cutting): ±0.10 mm Combined accuracy: ±0.15 mm Clamps: 4 pcs Tool stations: 38 pcs CNC system: Siemens 840Dsl Lrjdsz D Th Djpfx Afuet CNC axes: 11 Max. sheet metal speed: 102 m/min Turret speed: 30 rpm Max. load: 180 kg Dimensions (length): 8000 mm Dimensions (width): 8000 mm Dimensions (height): 2300 mm Machine weight: 20000 kg

Condition: good (used), Year of manufacture: 2000 Machine number: 080520 Control: Sinumerik 840D Combined working area: 2,585 x 1,280 mm Laser operation: 2,585 x 1,280 mm Punching operation: 2,585 x 1,370 mm Punching force: 220 kN Sheet thickness: 8 mm Speed x-axis: 90 m/min y-axis: 60 m/min simultaneous: 108 m/min Strokes per minute: 600 Linear magazine tools: 19 Max. punching diameter: 76.2 mm Laser: 90 to 1,800 W Applications: punching, slotting, shearing, bead forming, hemming, laser cutting Accessories: 4 complete cabinets - see separate email Condition: good, ready for operation Lsdpfx Ajxu Hlgefujrt Connection: 70 kW Weight: 16 t Dimensions: 7,000 x 7,400 mm

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green Ledpfoz Duvvjx Afuert TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0220A1818, laser power: 3,200 W, overall weight: 11,700 kg, TECHNICAL DETAILS Laser power: 3,200 W MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 125 A Control voltage: 24 V Required fuse rating: 3 × 125 A Compressed air connection: 7–10 bar Nitrogen connection (N₂): 30 bar Lodpfsz Ahrwjx Afuert Oxygen connection (O₂): 20 bar Connected power: 73 kVA Dimensions & Weight Dimensions (L x W x H): 9,229 x 6,145 x 2,200 mm Total weight: 11,700 kg EQUIPMENT CE marking Documentation / Manual Dust extraction Emergency stop switch Safety light curtain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety Lrsdpfjy Samuex Afuot - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Lrjdpfozp Dwpsx Afuot Hours: 11,800 Location available upon request Images available upon request

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Ledpfx Aezfaalofuort

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices Ljdpfx Afezv Sarsujrt - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser power: 4,000 W Lsdpfxez Ay Rre Afuert Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Lrjdezd Ulajpfx Afust Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Lredpfxjzp D H Dj Afujt Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Ljdpfx Aoz D Evaofuort Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps Lredjy Saqgopfx Afust - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser source manufacturer: Raycus, laser power: 6,000 W, laser wavelength: 1,070 nm, working length: 1,500 mm, working width: 3,000 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.05 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 2,610 mm, total width: 5,125 mm, total height: 2,128 mm, Equipment: CE marking, The WatMachinery ZMB1530 6kW is a heavy-duty fiber laser cutting machine from the ZMB series, engineered for fast, precise, and reliable sheet metal processing. This model is fitted with a Raycus 6kW fiber laser source and offers a cutting area of 3000 x 1500 mm, making it an optimal solution for workshops and industrial production lines working with steel, stainless steel, aluminum, brass, and other metals. The machine is equipped with a Raytools BS06K auto-focus cutting head, Delta / INOVANCE servo drives, Taiwan-made rack transmission, HIWIN / DTX linear guideways, a French Motovario gearbox, and the Cypcut control system. Its robust construction includes a reinforced machine frame, enclosed safety cabin, automatic lubrication system, industrial control cabinet, integrated smoke extraction, and an industrial-grade PC. Each component has been selected to ensure high positioning accuracy, stable drive transmission, and reliable long-term operation. The ZMB1530 is designed for continuous industrial duty with a 24-hour operating mode, travel speed of 80 m/min on the X and Y axes, and a maximum acceleration of 0.8G. The control system supports multiple file formats, remote operation, and real-time alarms and safety interlocks. An industrial water cooling system guarantees stable performance of the laser source and protects the machine during extended production cycles. As indicated in the material and cutting charts in the product brochure, the machine efficiently processes carbon steel, stainless steel, aluminum, and brass. The ZMB series is ideally suited for industries such as sheet metal fabrication, electrical cabinet manufacturing, automotive component production, general machinery, signage, metal product manufacturing, tooling, and many more sectors. Key Advantages: - 3000 x 1500 mm working area - Raycus 6kW fiber laser source - Raytools BS06K auto-focus cutting head - Cypcut control system - Delta / INOVANCE servo motors and drives - HIWIN / DTX linear guideways - Taiwan YYC rack transmission - French Motovario gearbox - Industrial water chiller - Fully enclosed protective cabin - Automatic lubrication system - Industrial PC with integrated vision system - Designed for 24/7 industrial operation Technical Specifications: Model: ZMB1530 / ZM-Series Laser Source: Raycus Fiber Laser Laser Power: 6 kW Working Area: 3000 x 1500 mm Wavelength: 1070–1080 nm Interfaces: USB, RJ45 X-Axis Travel: 3000 mm Y-Axis Travel: 1500 mm Z-Axis Travel: 100 mm Traverse Speed (X/Y): 80 m/min Positioning Accuracy: ±0.05 mm/m Repeatability: 0.05 mm Maximum Acceleration: 0.8G Power Supply: 380V / 50Hz Lrsdpfx Afsyr D Nxouet Operating Mode: 24/7 Machine Weight: 3150 kg Machine Dimensions: 5125 x 2610 x 2128 mm Main Components: * Raycus laser source * Raytools cutting head * WatMachinery machine bed and gantry * Taiwan YYC rack * France Motovario gearbox * Delta / INOVANCE servo drives (X, Y, Z axes) * HIWIN / DTX linear guideways * Cypcut control system * HanLi industrial water chiller * CHNT / Schneider electrical components * CKD / SMC pneumatic components * Integrated smoke extraction system * Automatic lubrication system * HP industrial PC * Enclosed safety cabin Application Areas Suitable for: * Sheet metal fabrication * Electrical cabinet production * Advertising and signage * Mechanical parts manufacturing * Kitchen equipment production * Automotive industry * General machinery industry * Metal product manufacturing * Tooling and measurement component production Pro

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Work area 3050 x 1550 mm - Drives with maintenance-free three-phase motors - Stable, easily accessible C-frame - Coordinate guidance - Linear magazine with 25 positions for clamping dies and tools - Follow-up device with programmable pressure clamp - Flap for stamped parts 500 x 500 mm incl. sensor - 2 scrap containers (=> not included with part conveyor belts) - Foot pedal for die closing - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Additional Xp and Yp axis - Ejection cylinder for laser parts - Fast flap for laser parts 500x500 mm incl. sensor - Adjustable laser cutting support - Slag cone detection TRUMPF Laser - Laser TruFlow 2700 incl. LensLine and optimized standby mode - High-frequency excitation - Closed beam guidance - Fine filtration of compressed air for beam pipe ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device (UTI) - LensLine with condition monitoring - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure clamp position - Tool length compensation - Scrap extraction - Calculation of filling level in the punching console - Stroke counter for punches - Spray lubrication for punches - Level monitoring for tool lubrication Control System - Open control system based on Bosch Rexroth IntraMotion MTX - Integrated technology data - 160 GB hard drive capacity - External control panel with 15" TFT touchscreen - Programmable cutting gas pressure - Teleservice interface via the internet - Automatic shutdown with wake-up function - Production plan Data Transfer - USB interface - RJ45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Multi-beam light barriers - Rapid shutdown of drives - Warping detection - Protection against stray radiation - Compact dust extraction system Extended Standard Equipment - Hydraulic clamping die (4 pieces) - Ball tables (=> not included with brush tables) - Chip container (=> not included with chip conveyor) - Cooling unit (water-air) + Laser TruFlow 3200 incl. LensLine and optimized standby mode + MultiTool function + Thread forming function + MultiShear function + Roll technology function + Softpunch function + StripLine function + Active die + Height-adjustable clamping die (4 pieces) + Follow-up cylinder - Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading assistance SheetMaster N0140A0054 automation: - Suction frame with 36 suction cups (y-axis = 400 mm) - Movable suction bars (v-axis = 170 mm) - Peeling suction cup - Vacuum sensor - Sheet thickness gauge for double-sheet detection - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic die closing of the machine + Extended guide rail Lsdpfxezv Twxe Afusrt + Table extension (brush design) + Fixed additional support table on the left (brush design) + Automatically adjustable additional support table on the right (brush design) + Large C-frame for processing oversized parts + Parallel loading and unloading of the SheetMaster during main processing time + Unloading monitoring + Lowerable GripMaster for large formats (3000 x 1500mm) + Scissor lift table (3000 x 1500)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 500 h, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser power: 3,000 W, sheet thickness aluminum (max.): 16 mm, sheet thickness brass (max.): 6 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 1,000 mm, working width: 700 mm, Equipment: CE marking, cooling unit, documentation/manual, Laser Cutting Machine Brand: BODOR - TUV - CE - with pneumatic clamping table Type: i5 Table: 1500x700mm Laser: 3000W (required for brass) Including pneumatic clamps/table Main components: 1. Bodorgenius Autofocus laser head 2. Cast iron machine bed 3. Japan YASKAWA servo motor 4. Taiwan ball screw 5. Japan Omron electric component 6. Taiwan square guide rail 7. Exhaust system 8. CW water chiller 9. Bodorpro 2.0 control system 10. Green glass 11. Automatic lubrication device 12. Wifi wireless control 13. Closed protective cover 14. 21.5-inch touchscreen 15. Scan cut (special for high-reflective materials) Technical parameters: Max cutting area: 700*1500mm X/Y axis positioning accuracy: 0.05mm Lodpfx Afsyq R N Neusrt X/Y axis reposition accuracy: 0.03mm X/Y axis max movement speed: 60m/min Max acceleration: 1.5G Max load capacity: 250kg Dimensions (L*W*H): 2980×2220×1970mm Total weight: 2000kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Large format. Ledpfx Afjzdrnrjuort Brushing table. Blasted for 59,000 hours.

Condition: used, Year of construction: 2015, Working hours machine: 31888 (17.01.2024) h Working hours laser on: 19090 (17.01.2024) h Working hours beam on: 6475 (17.01.2024) h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC 3i Working range laser: 2500 x 1170 mm Working range punching: 3050 x 1525 mm Length: 7870 mm Width: 5880 mm Height: 2666 mm Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min Lredeypt R Hopfx Afust Weight of machine approx.: 30000 kg Standard configuration - Patented servo-electric double drive- Punching force 300 kN- 32 tool stations (4 rotatable stations)- max stroke rate: 400- max material thickness 6mm- Automatic focus adjustment- Automatic gas pressure control- HS sensor cutting head- Nozzle cleaning- Splash guard- Good parts flap Extended machine accessories - TSU tool changer 300 Automation

Condition: new, functionality: fully functional, Year of construction: 2025, Glorystar Laser ALL NEW Laser Marking Machine | GM | 3-100W To meet various material and precision requirements for laser marking, we offer three options of laser marking machines for you to choose from. They are Fiber Laser Marking Machine, CO2 Laser Marking Machine, and UV Laser Marking Machine.? Laser Type: Fiber Laser Power:20-100W Optional Max. Marking Speed:7000mm/s Marking Range:50m×50mm-300mm×300mm Min.Line Width:0.03mm Min.Character Size:0.3mm Accuracy:±0.01 Dimensions:740mm×1150mm×1500mm Laser Type:CO2 Laser Power:15-55W Optional Lsdpfxeuc S Iuj Afusrt Max. Marking Speed:5000mm/s Marking Range:30m×30mm-200mm×200mm Min.Line Width:0.1mm Min.Character Size:0.6mm Accuracy:±0.01 Dimensions:740mm×1150mm×1500mm Laser Type:UV Laser Power:3-15W Optional Max. Marking Speed:7000mm/s Marking Range:100mm×100mm-300mm×300mm Min.Line Width:0.012mm Min.Character Size:0.15mm Accuracy:±0.01 Dimensions:1150mm×1190mm×1600mm

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device Lsdjzmgi Nopfx Afuort - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Extended punching technology: Multitool Thread forming