Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5

CNC Lathe - Inclined Bed Type HEID SDSM-NCC

Bühl, GermanyGermany dealership location
6593 km
1980
used
greates pass round over bed 750 mm swing diameter over bed slide 520 mm turning length 2660 mm movement of facing slide 460 mm Gt8uos spindle head DIN 55022 Gr. 11 spindle bore 105 mm max. torque on the spindle max. 5000 Nm max. workpiece weight between centres 1200 kg turning speed range - stepless 11,2 - 1800 U/min spindle motor 52 kW tailstock quill diameter 125 mm tailstock quill stroke 150 mm control BOSCH CNC System 5 tailstock taper MT 6 floor space required (w/o switchgear cabinet) 7,... more
5

CNC Lathe RJASAN 1 H 65 RF 3-5

Monheim, GermanyGermany dealership location
6403 km
2004
used
turning diameter 650 - 1000 mm turning length 5000 mm control CNC R+D Uniturn E8glmw2io turning diameter over bed 1.000 mm turning diameter over bed slide 650 mm centre distance 5.000 mm workpiece weight max. 8.000 kg x-axis 700 mm z-axis 4.500 mm faceplate turning speed range 5 - 500 U/min weight of the machine ca. 15,8 t with chip conveyor, 1 steady rest, 1 faceplate, documentation more
5

CNC Lathe MERLI CLOVIS 70-7000

Stockstadt, GermanyGermany dealership location
6564 km
used
turning diameter:1650 mm turning length:7000 mm control:FAGOR turning diameter over slide:1170 mm bed width:1000 mm max. workpiece weight between centers:18000 kg spindle bore:206 mm spindle nose:ASA A1 tailstock-quill conus:MORSE 7 diameter of quill:220 mm tailstock quill stroke:450 mm total power requirement:37/56 kW weight of the machine ca.:28 t tool holder:6 Stück 4-jaw chuck:1500 mm fixed steady:Ø 1050 mm turret: open steady: follower rest: Ywujcoxbv Used CNC Lathe MERLI CLOVIS 70... more
4

CNC LATHE WITH FANUC WORK STEADY DOOSAN 600

Jülich, GermanyGermany dealership location
6377 km
2011
good (used)
Coolant, tailstock, Interlocked guards, low voltage light, 3 jaw Chuck, swarf conveyor, hydraulic power work steady Bcvnuebclw Control FANUC 32i-model A Swing 1030mm Swing over the cross-slide 800mm Bar capacity 117 mm Chuck size 600mm Maximum cutting diameter 900mm Maximum cutting length 1600mm Turret position 12 Rapid Feedrates XZ: 12 x 16 m/min Spindle motor power 45kW Spindle nose A2-15 Spindle speed 1800 rpm Stroke tailstock Quill 150mm Tailstock taper MT 6 Tool size 32 x 32... more
6

CNC Lathe MORI SEIKI LL 7 A / 2500

Oelde, GermanyGermany dealership location
6448 km
1992
used
turning diameter 660 mm turning length 2.500 mm control MF T5 Main spindle: turning speed range - main spindle 1 - 1.150 min/-1 power capacity - main spindel 37 / 30 kW transmission ratio 4 spindle nose JIS A1-11 spindle bore 105 mm spindle bearing diameter 170 mm axis stroke: x-axis 675 mm z-axis 2.520 mm turret: Number of Turret 2 number of toolpositions 4 + 4 pos. Shaft cross-section of turning tool max. 40 mm Drill shank diameter max. 60 mm feeds: feed speeds 0,0034 - 500 mm/min ... more
5

CNC Lathe MAX MUELLER MDW 20

Düsseldorf, GermanyGermany dealership location
6394 km
used
turning diameter 800 mm turning length 630 mm control SIEMENS 840D swing diameter over slide rest 410 mm z-axis 630 mm x-axis 500 mm spindle head 11 spindle diameter in front bearing 130 mm spindle bore 73 mm spindle motor 37 kW spindle turning speed range 10 - 1000 U/min max. torque on the spindle 3700 Nm total power requirement 78 kW weight of the machine ca. 10 t dimensions of the machine ca. 6,5 x 3,5 x 2,8 m - Machine general overhould and retrofit with SIEMENS 840 D control in 2002 B... more
5

CNC Lathe SEIGER SLZ 850

Mönchengladbach, GermanyGermany dealership location
6371 km
2003
used
turning diameter:850 mm turning length:3000 mm control: 840 Bcyjrkffed turning dia. over face-slide:580 mm main drive:37/52 kW spindle turning speed range:1 - 1600 U/min tailstock quill taper MT:6 max. workpiece weight between centres:5000 kg total power requirement:60 kW weight of the machine ca.:15 t dimensions of the machine ca.:9 x 4 x 2,5 m CNC SIEMENS 840 D with Manual Turn driven toolings 1 self centering steady chip conveyor and coolant attachment driven toolholders more
6
turning diameter 375 mm turning length 2000 mm control MTC-K Cs0wfbro turning speed range 3-1800 U/min transmission ratio 4 manuell spindle nose A2-8 swing dia. 630 mm tool holder Multifix " D1" chuck: Forkardt total power requirement 21 kW more
7

MORI SEIKI MT2000A1SZ

GRENCHEN, SwitzerlandSwitzerland dealership location
6619 km
2005
good (used)
CONTROL MORI MSG501 SWING 749MM SWING OVER THE CROSS-SLIDE 599.4MM BAR CAPACITY 63.5MM DISTANCE BETWEEN CENTERS 1280MM MAXIMUM CUTTING DIAMETER 548.6MM MAXIMUM CUTTING LENGTH 1018MM MILLING MOTOR POWER 10HP MILLING RPM 8000RPM TURRET POSITIONS 12 STATION 6 POWERED TOOLS RAPID FEEDRATES XYZ: 24 X 16 X 24M/MINUTE SPINDLE MOTOR POWER 20HP SPINDLE NOSE A2-6 SPINDLE SPEED 4500RPM SUB SPINDLE BAR CAPACITY 43.18MM SUB SPINDLE MOTOR POWER 10HP SUB SPINDLE SPEED 6000RPM TOOL CHANGE CAPA... more
6

CNC Lathe WOHLENBERG

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1983
used
turning diameter 1300 mm turning length 5000 mm control SIEMENS 840 D Baww0l8kr9 more


CNC lathes...
daily

New machines via email!

Stay updated!
1

Flat Bed CNC Lathe Tuscan LC 38

United KingdomUnited Kingdom
5599 km
2012
good condition (used)
Fanuc OiTD CNC Control Automatic hydraulic 3-jaw chuck ø 600 mm Swing over bed 970 mm Swing over saddle 600 mm Distance between centres 4,300 mm Hollow spindle 153 mm Ss7gac 4 way H4-250 VDI auto toolpost 3 x 3 Point Steadies up to 650 mm capacity Boring bar holder Swarf Conveyor more
6

CNC Lathe BOEHRINGER VDF 32 M

Düsseldorf, GermanyGermany dealership location
6394 km
1993
used
turning diameter 700 mm turning length 1900 mm control SIEMENS 880T Qxagtrev3 turning diameter over bed slide 440 spindle drive motor 60 kW powered chuck diameter 400 mm spindle turning speed range 25 - 4000 U/min max. torque on the spindle 1780 Nm no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper bore 50 mm weight of tools max. 20 kg tailstock quill stroke 100 mm feeds 1 - 10000 mm/min spindle bore 103 mm total power requirement 78 kW weight of the machine ca. 22,5 t dimen... more
6
turning diameter 770 mm turning length 1000 mm control SIEMENS Sinumerik 840 C greates pass round over bed 920 mm swing diameter over bed slide 675 mm spindle diameter in front bearing 200 mm spindle bore 125 mm spindle head DIN 55021 Gr. 15 turning speeds - automatic switchable 5-1800 U/min worktool system TWS rechts tool taper DIN 69880 total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. 6x3x3 m chip conveyor - machine was completely overhauled i... more
6

CNC Lathe HEYLIGENSTAEDT Heynumat35/4000Flex

Nuernberg, GermanyGermany dealership location
6749 km
1995
used
greates pass round over bed 890 mm turning length 3958 mm control SIN840C longitudinal stroke 3.958 mm face stroke 525 y-axis +/- 140 mm feed X/Z-axis 0,5 - 5.000 mm/min rapid traverse x + z axis 15,00 m/min power feed longitudinal 22.000 N power feed plane 10.000 N greates pass round over bed 890 mm swing diameter over slide rest 810 mm turning speed range 5 - 1.800 U/min spindle drive 50 / 69 kW spindle bore 122 mm spindle diameter in front bearing 200 mm spindle head DIN55026-A15 Driven t... more
6
turning diameter max. 910 mm centre distance 1.750 mm control Fanuc 10 TF standard turning dia. 500 mm Main spindle: turning speed range - main spindle 11 - 1.010 min/-1 power capacity - main spindel 30 / 37 kW spindle bearing diameter 240 mm usable bar diameter 160 mm chucking diameter 500 mm spindle nose ASA-A2 / 11 turret: number of toolpositions 12 pos. Shank diameter 32 mm axis stroke: x-axis 400 mm z-axis 1.550 mm Tailstock: diameter of quill 150 mm tailstock adjustment 1.500 mm ... more
4

CNC Lathe WOHLENBERG PT1 1070 II

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1986
used
turning diameter over bed 1070 mm turning length 3000 mm Bbapdc9jrz control R & D MTC 4 more
6
Torshalla CNC lathe offered. Type: S250 CNC Dpitl77 Control unit: Bosch Type 3 Turning diameter bed: 700 mm Turning diameter support: 310 mm Turning length: 1200 mm Diameter spindle bore: 70 mm Diameter faceplate: 500 mm Vogel lubrication system Included coolant pump and parts Dimensions: 300x190x180 cm (LxWxH) For more information call us or send an e-mail. more

Center Lathe WEILER

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed mm Bctmexf8d9 turning diameter over slide rest mm turning length mm centre distance 800 mm centre height 200 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5

CNC Lathe TRAUB TNA 480

More Traub Tna 480
Grenzach-Wyhlen, GermanyGermany dealership location
6623 km
1989
used
turning diameter 660 mm turning length 1500 mm swing diameter over bed slide 360 mm Mzzvr power capacity 42 kW control Traub Mitsubishi TX 8 total power requirement 62 kW weight of the machine ca. 7,2 t 3 jaw chuck DIA 250 mm chip convoyer Switch-on HOurs. 26.000 h more
5

CNC Lathe MAZAK Slant Turn 60 N

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
1989
used
turning diameter 915 mm turning length - mm control MAZATROL 8ltfrvciv more
6

CNC Lathe DAEWOO Puma 300 B

Oelde, GermanyGermany dealership location
6448 km
2000
used
turning diameter max. 400 mm turning length 648 mm control Fanu 18 T greates pass round over bed 570 mm Swing dia. over traverse guideway 370 mm Main spindle: turning speeds max. 3.500 min/-1 power capacity - main spindel 22 kW max. bar capacity 76 mm usable bar diameter 76 mm chucking diameter 250 mm turret: number of toolpositions 10 pos. feeds: rapid traverse X: 20 / Z: 24 m/min total power requirement 40 kVA weight of the machine ca. 6,0 t Lvencymb dimensions of the machine ca. 5,5 x... more
6
1 CNC turning machine Manufacturer: Mori Seiki Type: SL 303 BMC/700 Year of construction: 2000 Control: Fanuc 18i-TA with internal Coolant (spindle internal cooling) Technical data: Maximum turning length (travel in the Z axis) 700 mm of maximum turning diameter over bed 713.7 mm of maximum turning diameter over support 500.4 mm maximum length travel in X-axis 248.9 mm Max spindle passage: 105 mm maximum main spindle power: 70% ED: 30 kW / 100% ED: 22.4 kW maximum main spindle s... more
6

CNC Lathe BOEHRINGER VDF 32 MA

Unterschleißheim, GermanyGermany dealership location
6842 km
1993
used
turning diameter 700 mm turning length 1900 mm control SINUMERIK 880T SIEMENS turning diameter over bed slide 440 mm spindle drive motor 60 kW powered chuck diameter 400 mm spindle turning speed range 25 - 4000 U/min max. torque on the spindle 1780 Nm no. of tools in turret 1 12 no. of tools in turret 2 12 tool taper bore 50 mm weight of tools max. 20 kg tailstock quill stroke 100 mm feeds 1 - 10000 mm/min total power requirement 78 kW weight of the machine ca. 22,5 t dimensions of the machine... more
3

Center Lathe POREBA TR2-93-8M

Willich, GermanyGermany dealership location
6368 km
2012
used
turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 8000 mm speed 800 U/min spindle passage 105 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 2vk0erboo more
3

CNC Lathe Poreba TRP 72MN x 3m

Poreba, PolandPoland
7209 km
2005
excellent (used)
Technical data: - swing over bed 720mm - swing over carriage 440mm - distance between centers 3000mm - max. weight of workpiece in centers 3000kg - max. wieght of workpiece in ceneters and two steadies 4600kg - spindle speeds 1-1700rpm - CNC sysetm: 21iTB Fanuc - motors and drives from Fanuc - condition: very good Equipment: steady rest 2 pcs., Suater turret head with toolholders Gvopzw more
4

Conventional Centre Lathe GIANA TG 410

Lonate Pozzolo, ItalyItaly dealership location
6791 km
ready for operation (used)
Height centres: 410 mm Distance between centres: 1500 mm Bed width: 450 mm Swing over crosslide: 570 mm Spindle nose Cam-Lock DIN55029: 11 " Spindle speed: 9 - 1030 rpm Number of spindle speeds: 24 Spindle bore: 150 mm Bcvsi02zxj Rapid travel X axis: 5.000 mm/1' Rapid travel Z axis: 5.000 mm/1' Taper of quill MT: 6 Spindle motor power : 11 Kw Approx Net Weight: 5.000 Accessories: Digital read Out more
6
turning diameter max. 650 mm turning length max. 790 mm control MSC 518 TC turning diameter over bed 890 mm turning diameter over cross slideways 560 mm centre distance 900 mm Main spindle: turning speed range - main spindle 4 - 1.010 min/-1 power capacity - main spindel 37 / 30 kW max. Torque 3.870 Nm Number of speed ranges 2 spindle bearing diameter 240 mm spindle bore 168 mm max. bar capacity 144 mm usable bar diameter 110 mm spindle head JIS A2 -11 chucking diameter 610 mm Hsmv0s7 turr... more
6

CNC lathe MORI SEIKI NLX 2500 SY / 700

Strutstr 17, 73061 Ebersbach/Fils, DEGermany
6687 km
2015
excellent (used)
Only 1,500 spindle hours! Swing over bed 920 mm Swing over cross slide 742 mm Maximum turning diameter 356 mm Maximum turning length 705 mm Max bar diameter 80 mm Traverse path x 260 mm Travel in Z 795 mm Travel Y 100 (± 50) mm C-axis 0.001 ° Main spindle spindle speed 4,000 rpm. Secondary spindle spindle speed 5,000 rpm. Maximum speed driven tools 10,000 rpm. Driven tools 5,5 kW Drive performance main spindle 26 / 22 kW Power side spindle 11 / 7,5 kW Turret stations 12 number ... more
6

CNC Lathe GEORG FISCHER NDM 22/150

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
1998
used
turning diameter 720 mm turning length 1500 mm control SIEMENS 840 C 0 32 kW longitudinal slide -travel 1500 mm face slide travel 350 mm spindle bore 92 mm turning speeds 1120 U/min turret 8-fach D2f2pjn tail stock hydraulisch total power requirement kW weight of the machine ca. 15,4 t dimensions of the machine ca. 7,0x2,5x2,7 m Max. turning diameter: Up to 350 mm Turning length: 720 mm Up to 450 mm Turning length: 585 mm Up to 2800 mm Turning length: 440 mm more
3

Center Lathe PBR T400

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 830 mm turning diameter over slide rest 520 mm turning length 5000 mm turning dia. in gap 1100 mm spindle diameter 130 mm speed 5-1000 (x24) U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Mhdsnysl more
5

CNC Lathe MAX MUELLER MD 7 it-4A

Düsseldorf, GermanyGermany dealership location
6394 km
1996
used
turning diameter 650 mm turning length 760 mm control EPL II swing diameter over slide rest 420 mm workpiece weight 500 kg longitudinal stroke 1025/625 mm face stroke 325/202 spindle motor 38 kW spindle turning speed range 10 - 2800 U/min spindle bore 101 mm spindle diameter in front bearing 160 mm spindle head A11 total power requirement 65 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4,9 x 2,3 x 2,5 m Machine equiped with EPL II CNC control for 4 axis F3xdxjz - pow... more
6

Conventional Centre Lathe OMG - Zanoletti 210

Lonate Pozzolo, ItalyItaly dealership location
6791 km
ready for operation (used)
Serial number: 2389 Height centres : 210 mm Distance between centres : 1000 mm Bed width : 320 mm Spindle nose Cam-Lock DIN55029 : 6 " Spindle bore : 57 mm Spindle speed : 37 - 1700 rpm Number of spindle speeds : 12 Spindle motor power : 7,5 Kw Tailstock quill diameter : 70 mm Taper of quill MT : 5 Xbnrhl0 Approx Net Weight : 2.300 Kg Note : Machine fully rebuilt Accessories : steady rest, follow rest more
6
turning diameter max. 650 mm turning length max. 790 mm control MORIC T5F turning diameter over bed 890 mm turning diameter over cross slideways 560 mm Dvya83 centre distance 900 mm Main spindle: turning speed range - main spindle 4 - 1.010 min/-1 power capacity - main spindel 37 / 30 kW max. Torque 3.870 Nm Number of speed ranges 2 spindle bearing diameter 240 mm spindle bore 168 mm max. bar capacity 144 mm usable bar diameter 120 mm spindle head JIS A2 -11 chucking diameter 610 mm turret... more
3
CNC lathe Contur dialog 800 Year of manufacture 09/2002 Control: Siemens 810 D Rotary diameter 800 mm Centre distance 3000 mm Equipped with Tieflochbohreinrichtung Auxiliary coolant pump 50 bar Support drilling console for the recording of drill rods diameter 100 mm Boring bar for storing Turnplates diameter 100 x 1000 mm Heavy metal - vibration damped boring bars diameter 50 x 650 mm Multi deep hole drill bit diameter 80 x 550 mm Multi deep hole drill bit diameter 70 mm x 450 mm ... more
6

CNC Lathe WOHLENBERG

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
1983
used
turning diameter 1300 mm turning length 3000 mm control SIEMENS 840 D 8ltc20pum more
3
turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 6000 mm turning dia. in gap 1250 mm spindle diameter 95 mm speed 8-800 (x24) U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Dvk8g3 more
5

CNC oil country lathe Tuscan LC34 x 6000

Wormerveer, NetherlandsNetherlands
6208 km
2006
good condition (used)
TUSCAN oilcountry CNC lathe type 6000 in good condition with spindle bore LC34 x 305 mm. Specifications: -Double 4-chuck -Control Fanuc 21-T manual guide -Between the centers 6300 mm -Turning on the bed 870mm -Turning over the cross slide 500 mm -Width of the bed 560 mm -Spindle bore 305 mm -Spindle connection A2-20 -Speed 4-400 -Building year 2006 Bcr9pdnskc Including: -Hydraulic Tailstock -8 POS. Turret -2 x 4-chuck -front and back side chip conveyer -Fully enclosed guard... more
15
Control system: SIEMENS SINUMERIK Turning over bed: 820 mm Turning over carriage: 530 mm Spindle bore: 106 mm Spindle speed: 1800 / min Turning length: 3000 mm Motor power: 22 kW Machine dimensions: 5000 x 1800 x 1930 mm Machine weight: 5400 Accessories: chuck 1 x set of soft cheeks 1 x set of hard cheeks Tailstock (manual) with quill Quick change tool Bb9ffbsjrb Availability: end of 2018 more
6

cnc lathe motorized tool Lealde TNC-12

Itziar-Deba, SpainSpain dealership location
6108 km
2001
good (used)
• Max. Diameter on bedplate 710 mm • Max. Diameter on trolley 505mm Ba93xwbyyg • Distance between points 1.050mm • Floor height above ground 1.100mm • Inclined bedplate 60º • Spindle passage 98mm • Spindle speed 20-2500rpm • Main engine power 37/45Kw • No. Of speed ranges 2 ranges • No. Of turret positions 12 motorized • Hydraulic plate ∅ 500 • Chip conveyor • CNC Fagor 8055 more
6

CNC lathe Knuth Proton 800/1500

Trittau, GermanyGermany
6505 km
2011
excellent (used)
Make: Knuth Type: Proton 800/1500 Year of construction: 2011 Control: FAGOR Centre distance: 1500 mm Turning diameter: 800 mm Tip height: 400 mm Spindle passage: 105 mm Engine capacity: 18.3 kW Dimensions: approx. L 3.90 x B H 2.00 x 2.00 m Weight: approx. 4.5 t Accessories: 3g29f9sr -TOS 3 jaw Chuck -4 jaw Chuck WMW -Faceplate -2 pairs of blocks for faceplate All information without guarantee. The machine is located in a very good condition. A demonstration is at any time... more
4

CNC Lathe WOHLENBERG PT1 1070 II

Mülheim.an der Ruhr, GermanyGermany dealership location
6388 km
1986
used
turning diameter over bed 1070 mm turning length 3000 mm Mxbyn control R & D MTC 4 more
4

Center Lathe CIANA TG410

Willich, GermanyGermany dealership location
6368 km
used
turning diameter over bed 820 mm turning diameter over slide rest 570 mm turning length 6000 mm spindle diameter 150 mm speed 9-1030 (x24) U/min total power requirement kW V9f8s weight of the machine ca. t dimensions of the machine ca. m more
5

cnc-lathe BOEHRINGER V800

Himberg, AustriaAustria
7167 km
1990
ready for operation (used)
Diameter over bed 820mm, distance between Center 3.000mm, tool holders, boring Equipment, spindle Speed 1.800rpm, CNC-Control VDF B3T, chip conveyor, coolant Equipment, accessiroes Bcsrztxshs more
6

Lathe CNC Gildemeister NEF 520

More Gildemeister Nef 520
Brno - Slatina , Czech RepublicCzech Republic
7122 km
2006
excellent (used)
Lathe CNC NEF 520 Producer: Gildemeister YP: 2006 Control Heidenhain Manual plus Turning diameter ... 500mm Turning length ... 1500mm Rapid traverse ... 10 / 1m / min Gak0lwf Total power requirement ... 24kVA Machine weight ... 3200kg Possible to test under power. more
10

daewoo puma 500 daewoo puma500

Ciserano, ItalyItaly dealership location
6851 km
2001
ready for operation (used)
Controllo: FANUC 18i-TA Lunghezza massima: 1575mm max diameter: 700mm max diam. 900 mm swing over bed Grt8lfh power spindle: 44KW passaggio barra 117.5mm speed spindle: 1500 giri/min turret stations 12 pos more
6

Turning Machine EMCO EMCOTURN 900

Trippstadter Str. 110, 67663 Kaiserslautern, AlemaniaGermany
6535 km
2006
excellent (used)
OVERVIEW: Brand: EMCO Model: EMCOTURN 900 Application type: Turning Machine type: CNC Lathe Availability: Immediately Production year: 2006 70bmpw7xu Location: Spain Origin country: Austria Delivery time: 4 weeks GENERAL DATA: Measurements width: 7600 mm Measurements depth: 3270 mm Measurements height: 2900 mm Machine weight: 23000 kg MAIN DRIVE: Number of spindles: 1 Spindle speed range: 800 1/min Spindle motor power: 60 / 80 kW Spindle bore: 206 mm CONTROL UNIT: Bra... more
2

cnc lathe BOEHERINGER VDF 400 C-F

Serenwaldstr. 10, 73563 Mögglingen, DEGermany
6710 km
1985
good (used)
Control Philips B2T Turning diameter 750 mm Turning length 1000 mm Spindle speed 1800 1 / min Fn2phs9 12-station turret more
4

CNC Lathe GEMINIS GHT4

Willich, GermanyGermany dealership location
6368 km
2005
used
turning diameter 720 mm turning length 6000 mm control Siemens 810D spindle diameter 104 mm Turning diameter over slide 470 speed 0 - 1600 m/min voltage 400 V total power requirement kW weight of the machine ca. t dimensions of the machine ca. m 29rfpd07q more
1
Fanuc 32i-TA Control 4-jaw 21" chuck Swing over bed 750 mm Swing over carriage 480 mm Max turning ø 750 mm Distance between centres 4000 mm Max turning length 4000 mm P38yz7 Load capacity between centres 4000 kg Spindle bore ø 105 mm Spindle nose A2-+11 Spindle speeds ~ 1250 rpm Spindle centre taper MT #6 Toolpost type Auto H-4 / V-8 X/Z Travels 425/4380 mm X/Z Rapids 4/6 m/min Tailstock quill ø 112 mm Tailstock spindle taper MT #6 Max quill travel 200 mm Spindle motor AC 18.5... more
4

CNC Lathe with Fanuc Hankook

Jülich, GermanyGermany dealership location
6377 km
2010
ready for operation (used)
Control: FANUC 21iT Distance Between Centres: 4000mm Spindle Bore: 254mm Spindle Motor Power: 30Hp Spindle Speed: 630rpm Swing: 950mm Swing over the Cross-slide: 630mm F92b2woni Turret Positions: 8 Station Swarf conveyor, Coolant, Tailstock, Interlocked guards, Low Volt Light, 4 Jaw Chuck, Manuals, Rear Mounted Chuck more


CNC lathes...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close