Used Pneumatic Punching Machine for sale (67,968)

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Tedpjh U Dtusfx Aqxsa Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, punching force: 28 t, workpiece weight (max.): 200 kg, working width: 3,080 mm, working length: 1,560 mm, The following parts of the machine have been renewed: Festo pneumatic system Brand new Labod control system Replacement of the Y-axis bearings TECHNICAL DETAILS Tedpfx Ajzl Sraeqxsa Working area: 1,560 × 3,080 mm Sheet metal length through repositioning: max. 9,999 mm Hydraulic punching force: max. 280 kN Workpiece weight: max. 200 kg Positioning speed of the X-axis: max. 60 m/min Positioning speed of the Y-axis: max. 60 m/min Simultaneous positioning speed of the X and Y axes: max. 85 m/min Stroke rate with standard hydraulics: max. 250 strokes/min Stroke rate with quick hydraulics: max. 800 strokes/min Note: The machine has already been disassembled.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 9443, total height: 3,160 mm, ram adjustment: 64 mm, total width: 1,300 mm, total length: 2,470 mm, conveyor belt width: 160 mm, pressing force: 50 t, control cabinet height: 1,100 mm, control cabinet length: 1,250 mm, control cabinet width: 400 mm, type of input current: AC, stroke adjustment: 1,651 mm, clearance between the columns: 250 mm, working width: 950 mm, input voltage: 380 V, overall weight: 8,600 kg, control voltage: 24 V, conveyor belt thickness: 4 mm, pressure: 5 bar, compressed air connection: 10 bar, input frequency: 50 Hz, punching force: 50 t, BRUDERER BSTA 50HL (500 kN, year of manufacture 1990, order no. 9443) Tjdpszq Sdyofx Aqxea HIGH-PERFORMANCE STAMPING PRESS 100-1000 SPM Technical data Press manufacturer: BRUDERER AG, Frasnacht, Switzerland Machine model: BSTA 50 HL Serial/order number: Order no. 9443 Year of manufacture: 1990 Total weight approx.: 8,700 kg Soundproof cabin: W 3,460 × L 2,331 × H 3,910 mm (optional extra) Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Tool opening width (max.): 950 mm Support plate – width × depth: 940 × 650 mm Base plate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip feed width: 250 mm Feeder: BBV 195 - 85 Feed angle: 90 degrees Max. strip thickness: 4 mm, strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 380 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder): approx. 2,471 mm Press depth: approx. 1,302 mm Press height: approx. 3,165 mm Price including transport in Europe Original technical documentation and circuit diagrams Optional: Sound-insulating safety cabin/enclosure

Condition: excellent (used), Year of construction: 2002, stand-alone unit Tjdpfxszp Dwvs Aqxea Hours: 11,800 hours Location available upon request.

Condition: excellent (used), Year of construction: 2002, including Sheetmaster, Toolmaster, and Gripmaster Hours: 11,800 Tsdpjzp Dwpsfx Aqxoa Location available upon request Images available upon request

Condition: used, Year of construction: 1994, Product information "Boschert Hydraulic CNC Punching Machine" Type / Model: Boschert EL 750 digital Condition: Used Year of manufacture: 1994 Technical data Working area & dimensions Overhang (Y-axis): 750 mm Travel range (X-axis): 1500 mm Max. sheet size (without repositioning): 720 x 1700 mm Performance data & capacity Max. hydraulic punching force: Standard 280 kN Max. sheet thickness*: up to 12.7 mm Max. punching diameter: Ø 105 mm Stroke rate: max. 100 strokes/min Tooling: Original Trumpf® tool system Positioning accuracy with 2-axis digital display: ± 0.1 mm Tedpfezp Raqjx Aqxoa Connection power: 4 kVA Control voltage: 220 V Required fuse rating: 3 x 16 A Installation dimensions (W x D x H): approx. 3400 mm x 1580 mm x 1600 mm Weight: approx. 3400 kg Equipment - includes various tools / accessories * Material-dependent, usually designed for thin sheet metal up to 6 mm at full diameter or any shape that fits into a circle of Ø 105 mm Inquiry item: Transportation costs in individual offer.

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Laser on time: 72,745 hours Tjdeznir Aspfx Aqxoa Includes Sheetmaster.

Condition: used, functionality: fully functional, Year of construction: 2012, Standard equipment: Machine - Work area 2500 x 1250 mm - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool stations and 3 clamping claws - Drives with maintenance-free three-phase motors - Follow-up device with programmable clamping device - Foot pedal for clamping claw closure - Ball tables - Two good part containers - Scrap container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control TASC - Enclosed beam guidance - Beam tube ventilation with compressed air Cutting head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable clamping device with manually adjustable clamping force - Stroke counter punch - Spray lubrication punch - Punch slug extraction - Deformation detection - Flap for punching parts 500 x 500 mm incl. sensor for part chute - Reaching the fill level in the punching console Todpfx Aqszmgm Isxoa - Level monitoring for thread forming and tool lubrication Control system - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard disk with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data transmission - Network connection RJ45 and USB interface Safety - CE marking - Dual light barriers - Monitoring system for gas pressure, temperature, coolant, etc. - Quick shutdown - Protection against stray radiation - Compact dust extraction system Extended equipment - Brush tables - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication die - 3 clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Air blow-out device for small parts - Follow-up cylinder Automation: - Toolmaster

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 14,669 h, Trumpf TruPunch 1000, 2019 X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 14,669 hours Machine - C-frame - Coordinate guidance - Linear magazine with 20 positions for clamping blocks and tools - Hydraulic clamping blocks (2 pieces + 1 option) - Drives with maintenance-free three-phase motors - Post-processing unit with programmable positioning device - 1st stop pin (inside right) - Transfer chute Punch head - Electro-hydraulic punch head - Rotatable mono-tool holder - Programmable positioning device position - Tool length compensation - Spray lubrication for punch - Punch slug extraction - Forming function Control - TRUMPF control based on Rexroth IndraMotion MTX - Control panel with 15" TFT color screen - Integrated technology data - Teleservice interface via internet - Automatic shut-down - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light barriers - Rapid shut-down of drives Extended standard equipment - Brush tables - Chip conveyor + chip container - Additional clamping block - Sheet thickness detection - Vibration-damped installation - Programmable support table - Sensor for transfer chute - Wireless operation point Todpfxszmgi No Aqxja Extended punching technology: Multitool Thread forming

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 45,500 h, punching force: 30 t, punching diameter: 89 mm, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 5 mm, overall weight: 22,000 kg, total length: 17,000 mm, total width: 7,000 mm, total height: 3,500 mm, travel distance X-axis: 2,584 mm, travel distance Y-axis: 1,560 mm, workpiece weight (max.): 200 kg, compressed air connection: 6 bar, space requirement height: 3,500 mm, space requirement length: 17,000 mm, space requirement width: 7,000 mm, travel speed (max.): 10,800 mm/min, Equipment: safety light barrier, Finn Power punching machine 3000 x 1500 mm with an angle shear of 800 x 1500 mm and a stacker for 4 pallets. Todpezdc Iqefx Aqxja Loading table for sheets of 3000 x 1500 mm. Punching up to 8 mm thickness, angle shear up to 5 mm thickness. Turret with 20 stations, including 1 multi-tool 10-16 and 1 multi-tool 24-8, 2 * Di, 3 * Ci, 2 * Bi. Also has 2 forming stations, Bf and Cf. Always used for thin sheets, max. 2 mm. A tapping head TU6 is included, but it displays an error message.

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Todpfsx Nd U Dox Aqxja

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Tjdpfjyyk Urex Aqxoa Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Machine weight: 15,100 kg

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Laser power: 2,500 W, Todpfx Aszp D H Deqxoa Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, working width: 1,500 mm, punching force: 28 t, workpiece weight (max.): 200 kg, sheet thickness (max.): 4 mm, working length: 3,000 mm, TECHNICAL DETAILS Maximum punching force: 280 kN Tedpfxszlivio Aqxoa Working area: 1,500 x 3,000 mm Maximum sheet metal thickness: 4 mm Maximum workpiece weight: 200 kg MACHINE DETAILS Machine weight: 15,800 kg

Year of construction: 2011, condition: ready for operation (used), A Trumpf CNC punching machine is offered. Max. punching force: 180kN, working range X/Y: 2500mm/1250mm, max. sheet thickness: 6.4mm, max. workpiece weight: 160kg, max. punching diameter: 76.2mm, axis speed: approx. 100m/s, max. punching stroke rate: approx. 1000 strokes/min, max. marking stroke rate: approx. 2500 strokes/min, tool magazine: 18, clamps: 2, max. part size X/Y: 500mm/500mm, operating hours: 22146h. Including tool cassettes, various punches and dies, a MultiTool, and Easy Type. Weight: approx. 9.8t, machine dimensions X/Y/Z: approx. 6500mm/6203mm/2252mm. Documentation available. An on-site inspection is possible. Todpfx Aqjzpyygexoa

Condition: new, Year of construction: 2026, functionality: fully functional, D-T50 – CNC Turret Punch Press | Heavy Duty CNC Turret Punch Press – D-T50 | 500 kN | Sheet size 2500×1250 mm Heavy-duty CNC turret punching machine engineered for high-volume sheet metal fabrication. With a punching force of 500 kN and a stroke rate of 160 hits per minute, the D-T50 guarantees excellent productivity and precision. Key Specifications: • Capacity: 500 kN • Hit Rate: 160 strokes/min • Sheet Size: 2500 × 1250 mm • Max. Sheet Size (with single reposition): 5000 × 1250 mm • Max. Sheet Thickness: ≤ 6.35 mm • Accuracy: ± 0.1 mm • Feeding Speed: 80 m/min • Turret Stations: 16 / 24 / 32 • Air Pressure: 0.65 MPa • Machine Dimensions: 5000 × 5200 × 2300 mm ✅ High hit rate – ideal for mass production ✅ Extended sheet capacity with repositioning up to 5000 mm ✅ CE certified | Warranty included | Spare parts & service available D-Y80 – CNC Turret Punch Press | Heavy Duty | Thick Plate CNC Turret Punch Press – D-Y80 | 800 kN | Thick Plate up to 15 mm Heavy-duty CNC turret punching machine designed for processing thick sheet metal. The D-Y80 accommodates material up to 15 mm thick, delivering 800 kN punching force — perfect for structural and heavy-gauge tasks. Key Specifications: • Capacity: 800 kN • Hit Rate: 100 strokes/min • Sheet Size: 2000 × 800 mm • Max. Sheet Thickness: 6–15 mm • Accuracy: ± 0.15 mm • Feeding Speed: 60 m/min • Turret Stations: 6–12 • Air Pressure: 0.65 MPa • Machine Dimensions: 4100 × 4000 × 2400 mm ✅ Exceptional punching force – specialist for heavy-gauge sheet metal ✅ Robust design for demanding industrial applications ✅ CE certified | Warranty included | Spare parts & service available Todpsy Swn Njfx Aqxea

Condition: used, machine/vehicle number: 1903, Universelle Stanzmaschine - Punching machine Masfeld ZEL 1903Serial-No. 1903 Online-Video-Inspection by Skype-Video Tedpfsh Axmfsx Aqxea We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1967, machine/vehicle number: 3659, Kalenderstanze - Calender Punch Machine Renz Super 520Year 1967 - Serial-No. 3659 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Tedpfeh Axcyjx Aqxsa Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Eckenausstanz- und Schlitzmaschine / Corner Punching and Slot machine Krause ES-SMSchlitztiefe / Slot depth 220mm Hub 30mm Eckenausstoßtiefe / corner ejection depth 220mm Online-Video-Inspection by Skype-Video Tedpfsi Dx Nnox Aqxsa We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 10097, Universelle Stanzmaschine - Punching machine PRINTEX 10097Serial-No. 10097- Tjdpfx Aqeh Axl Noxoa Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Schlitzmaschine / Slot machine Krause-Y-32-UM-2-69Schlitztiefe / slot depth max. 32cm Normal Schlitzbreite / Normal slot width 3mm Hub des Druckstückes / stroke of the pressure piece ca. 30mm Tjdpfx Aoiiduaeqxja Stanzhübe / punch strokes per minute ca. 84 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video Tedpjll A Tmefx Aqxea We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 22027, Stanzautomat / Calender - Block Punching Machine Plastograph PZ 599Baujahr / Year 1998 Arbeitsbreite / Working width 120 - 600mm Papierlänge / Paper length 100 - 550mm Arbeitsbreite min. 95mm - max. 600mm Hubzahl einstellbar / number of Strokes adjustable 30 - 120/min. Flachstapelanleger / Flat Pile Feeder 5 Stanz-Formen / 5 Punching Tools: Todpfx Aqeh Uk Hajxea Types Wire-O 2:1 / 3:1 - Plastik-Effekt / 3:1 4x4mm / 3:1 4x6mm Werkzeug 4x4mm mit Daumenstanzung / Tool 4x4mm with calender hole punchAuslage Rüttler / Delivery Jogger Panel Operation and Controls Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 75261, Universelle Stanzmaschine - Punching machine PRINTEX 75261D1Serial-No. 75261D1- Für Platiktüten - Folien - Papier - Karton For Platic Bags - Foils - Paper - Karton 2 Hand-Auslösung 2 Hand release Online-Video-Inspection by Skype-Video Tsdpeh Axl Eofx Aqxja We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 499, Universelle Stanzmaschine - Universal Punching machine SKAG SP347Serial-No. SP347 Tjdpsh Axmbefx Aqxja Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test