Used Pneumatic Punching Machine for sale (86,615)

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Nsdpfsxyyynsx Agzjlk Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Nlsdpfxexcbbrj Agzek Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 170610, Stamping machine with heated stamping head Nledpfx Agoxy Rk Dezek

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Njdpjxxzhwsfx Agzelk

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Nsdpfx Asxqg T Negzjlk - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear Nlodperknnfefx Agzjk - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Nsdpfsxyyyhjx Agzjlk Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: repair required (used), 3-column press Installation dimensions: W 350 mm x L 200 mm x H 250 mm incl. roller feed Nledsxxm Aaspfx Agzsk

Condition: refurbished (used), Year of construction: 1984, functionality: limited functionality, pressing force: 40 t, year of last overhaul: 2024, punching force: 40 t, SCHAAL Punching Press Type SEP40 Machine number 84/623 Year of manufacture: 1984 Condition: very good, mechanically overhauled, without press control; A new control unit is available on request Press force: 40 tons Sheet width: 150 mm Stroke: Fixed stroke 50 mm. (Original 8 - 70 mm) Number of strokes – infinitely variable: 100 – 250 spm (possible up to 400 spm, but with the current stroke of 50 mm the maximum is 250 spm) Ram surface: 340 x 320 mm Tool holder bore: Ø 40 x 80 mm Ram adjustment: 70 mm Table size: 550 x 580 mm (not included in the scope of delivery, available upon customer request) Clear opening in table: 400 x 90 mm Lateral frame opening: 250 mm Distance between uprights: 560 mm Drive power: 5.5 kW Dimensions (H x W x L): 2300 x 1600 x 1400 mm Weight: approx. 3,800 kg Feed: Type: SZV 2 Number: EP4340 Year: 1999 Strip width: 8 - 120 mm Feed length: 2 – 80 mm Feed thickness: 0.1 – 2 mm Feed accuracy: ±0.01 mm Equipped with Unidor press force measuring system, calibrated on 29-2-2024 Press and roll feed have been mechanically overhauled at the beginning of 2024. Nledexwk Tgopfx Agzsk Renewed: eccentric shaft, main bearings, flywheel bearings, connecting rod bearings, ram roller bearings, drive belt for roll feed, pressure regulator, rotary union seals, access doors, and polycarbonate panels. The machine can be inspected in operation.

Condition: good (used), Year of construction: 1991, General Features: Nodpfx Agjxxlbhszslk • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Included: • Standard documentation (if available) • Machine as inspected at current location Condition: • Good working condition for its age • Can be tested under power • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Stroke rate 80-1400 (depending on selected stroke) Nljdpfxstvnlbe Agzek Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey

Condition: used, functionality: fully functional, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, table length: 2,000 mm, table width: 1,000 mm, input voltage: 410 V, overall weight: 7,500 kg, Equipment: centralized greasing system, documentation/manual, emergency stop, Amada Aries 245 in good working condition, supplied with tools (9 tools with various clearances for different sheet thicknesses). Nljdpfxoxyzu Hs Agzek

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Njdpfoxyyx Rsx Agzjlk Pipe notch for zinc spout in pipes with outside diameters diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 600 h, functionality: fully functional, feed length X-axis: 7,800 mm, feed length Y-axis: 150 mm, total height: 2,800 mm, pressing force: 60 t, total length: 3,950 mm, total width: 1,635 mm, input frequency: 50 Hz, input voltage: 400 V, For sale is a Lafranconi LM1200 CLASSIC XL SPECIALE, year of manufacture 2018, with only 600 operating hours. The system is in excellent condition and is ideally suited for complex punching and bending processes on wide material cross-sections. Its modular design, modern Siemens control system, and tool compatibility make this machine extremely flexible and versatile in application. Nedpfexyav Njx Agzjlk

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). Nodpfxsxl Tals Agzjlk - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: excellent (used), Year of construction: 1999, Finnpower A5-25SB Njdpextuutefx Agzelk Installed 1999 Jetcam offline software Erwin Sick perimeter guard and fence Siemens 840D Punch force 230Kn 20 Tool Station Turrett with multi tool for up to 10 more additional pcs Please feel free to contact if further information is required

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Nlodsvq N Ndspfx Agzsk Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Nsdpfewp Aa Sex Agzelk

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Nodpfx Aoxmfc Usgzjlk Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2000, operating hours: 18,686 h, functionality: fully functional, For details, see the description Nlsdpsxvx Tljfx Agzek

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Nedpfx Agom Ncayszjlk Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2001, Used High Quality, Very Clean and Fully Serviced Large Format Amada Vipros King 368 Cnc Punch Press For Sale Complete With 1600 Throat To Process 3metre x 1.5metre Sheet Metal year 2001 price POA specification 30 TONS CAPACITY 58 STATION 4 AUTO-INDEX HYDRAULIC CNC PUNCH PRESS COMPLETE WITH LKI MP3000 LOAD -UNLOAD MANILPULATOR description CAPACITY 30 TONS TYPE BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM BRIDGE FRAME SERVO CONTROLLED HYDRAULIC RAM CONTROL FANUC 18P MAX AXIS TRAVEL 1525 X 2000 MAX SHEET SIZE 1525 X 4000 MAX SHEET THICKNESS 3.2MM 58 STATIONS THICK (H) 24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 1 x 88.9 mm AUTO-INDEX STATIONS 2 X 31.7mm 2 X 114.9mm MAX SHEET WEIGHT 150 KG 120 KG AT MAX SPEED Nodpfxsr D R Ruo Agzjlk MAX HIT RATE 860 STROKES PER/MIN POWER AND AIR REQUIRED 30 KVA 400V +/- 10%50 Hz AIR 5.0 kgf/cm/2 AIR FLOW 250 L/MIN COOLING WATER FLOW Min 40 1/min WEIGHT 14000kg SERIAL NO. MAX SHEET SIZE 3000mm X 1500mm MIN SHEET SIZE 1000 MM X 300mm SHEET THICKNESS RANGE 0.5mm – 6.0mm MAX LIFT CAPACITY 170 KG WITH DOUBLE SHEET DETECTION MAX PALLET LOAD 3000KG POWERAND AIR REQUIRED 10 KVE AIR 6 BAR FLOW RATE 650L/MIN

Condition: good (used), Year of construction: 2018, functionality: fully functional, You will find all details in the exposé. Nodpfx Aexvx R Dogzelk

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 Njdpfx Agotltl Hezslk CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, punching force: 18 t, working range: 30,001,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, Very well maintained and fully serviced used Large format Trumpf 3000 cnc punch press for sale Manufacturer TRUMPF Type TruPunch 3000 (S11) Year 11/2012 Working area 3000 x 1500 mm - without reposition Working range on cross-side (X-axes) 3000 mm Working range along (Y-axes) 1600 mm Large throat 1600 Nledpfx Aoxrnggsgzok Complete with multi tool capability Type S11 Video available upon request