Punching machine

KAMA ProCut 76

Year of construction: 2022, operating hours: 6,123 h, condition: used, functionality: fully functional, machine/vehicle number: 20-22-004, Like new, hardly used. Kdedpfxeziaqfo Ap Deu

Condition: used, Year of construction: 1973, The Hohner Favorit, manufactured in 1973 with serial number 1248, is a classic stitching machine built for durability and reliable performance. With a stitching capacity of up to 25 mm, it remains a practical solution for a wide range of binding applications. Currently located in Germany, the machine is in good condition without any damage, reflecting its robust construction and careful maintenance over the years. Kodpoxb Dpcofx Ap Dodu Renowned for its solid engineering, the Hohner Favorit continues to be a dependable choice for printshops and finishing operations seeking a straightforward, long-lasting stitching solution. Format: 25 mm Equipment: Good condition without any damage

Year of construction: 2020, condition: ready for operation (used), A barely used foil die-cutting and embossing machine Kama with integrated hot foil stamping is available. Die-cutting force: 165t, max. sheet format X/Y: 760mm/600mm, min. sheet format: 279mm/210mm, max. die-cutting format X/Y: 743mm/585mm, production speed: 5500sheets/h, gripper margin: 10mm, min. paper weight: 100g/m², max. cardboard weight: 1500g/m². Machine dimensions X/Y: approx. 5000mm/2700mm/2750mm, weight: approx. 6000kg, operating hours: approx. 1000h. Including Kama AutoRegister, vacuum pump, compressor and servo main drive. Documentation available. An on-site inspection is possible. Kdedpey Nnakefx Ap Dou

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Kdsdpfxexzvame Ap Dou Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Kdodpjzv Nkbefx Ap Deu Includes frame, fillers, and letterpress locks.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Kjdpst H Nhhofx Ap Dedu Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Kdodpfozlgbpjx Ap Dsu Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: used, ATS Tanner ATS-CE 340/30 Banding Machine Product Width: 1”-13” Product Height: up to 6” Speed/Cycles: 22-26 cycles/min. Performance: Up to 26 bandings per minute Ksdpswlgz Sjfx Ap Dedu Band width: 30mm Voltage 115 V/50 Hz, 115 V/60 Hz Electrical Power: ca. 0.2 kW Weight: 25 kg

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Kdedpfx Apsp H Tkij Dsu

Condition: excellent (used), Year of construction: 2014, Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Kdjdpszavhcofx Ap Dou Image format 317 x 464 mm Paper weight* Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm