Used Punch And Bind Machine for sale (71,076)

Condition: new, AUTOMATIC PUNCH AND BIND MACHINE FOR CALENDARS Dkodei Arm Repfx Affok RILECART PB-796

Condition: ready for operation (used), functionality: fully functional, Very nice Wire-o punching machine. Dkjdpfjymn Hwox Affek Electric with foot pedal, max format 710 mm. Punches up to 20 sheets of 80 gsm with square holes. You are of course welcome to test this machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please request a price including transport (location: Netherlands). Kind regards, Henk Hoos.

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Dedpfx Ajuzv Tzsffskk Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active stripper force: 9 kN Max. workpiece weight: 120 kg Max. part chute size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. punching strokes (F=1 mm): 600 strokes/min Max. marking strokes: 1300 strokes/min Tools Number of tool and clamp stations: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser Data Guaranteed maximum output: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas (CO₂, N₂, He, Xe, CO) consumption for cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Laser system switch-on hours: 25,582 h Electrical consumption (laser unit): 65 kVA EQUIPMENT Sturdy C-frame Coordinate guidance with integrated linear scale 2 workpiece clamps Maintenance-free three-phase servomotors Brush tables HI-LAS high-pressure cutting Dedpeyv Ddrjfx Affskk High-speed processing with SprintLas Programmable scan feed Quick-change cutting head system APC capacitive height control Lens monitoring sensors Laser logbook function Compact nesting table Rotating tool holder Automatic repositioning with stripper Automatic part chute Sliding part container Spray lubrication for punch 2 lubricant containers Slug extraction Chip bin Hydraulic quick shut-off External control panel 15" TFT touchscreen color display USB stick interface 3.5" floppy disk drive Safety devices RJ45 network connection Network integration Comprehensive operating manual Remote diagnostics facility SPECIAL EQUIPMENT Thread forming function Softpunch function Vertically adjustable clamp Repositioning cylinder Vibration-damped installation Sensor for part chute Spray lubrication for die Brush-type loading/unloading assistance Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Year of construction: 1992, condition: ready for operation (used), functionality: fully functional, overall weight: 7,000 kg, punching force: 20 t, table length: 2,450 mm, table width: 1,200 mm, machine/vehicle number: 24550616, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Punching force: 200 kN Table dimensions: 2,450 x 1,200 mm MACHINE DETAILS Dkodpfx Aoym Nlzsffok Connected load: 11 kVA Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,000 x 1,900 mm Weight: 7,000 kg EQUIPMENT Various punches Punching tool External reference: CES - Lot 107

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Dsdpfx Afewnhd Hsfokk Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Dkjdjw Ryxmepfx Affek Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No Dodpfx Asymfbfoffekk - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg Dkedpsymfa Uofx Affek - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, total length: 1,500 mm, total width: 900 mm, total height: 1,700 mm, Empty weight: 1.400 kg Steel round: 40mm Steel flat: 200x20mm / 300x15mm Notching + Punching + cutting - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 155976 - Drive system: Conventional - Punching force [ton]: 60 - Round bar cutting capacity [mm]: 40 - Motor power: 4.0kW - Transport dimensions: 1500mm x 900mm x 1700mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Dksdpfjwraazex Affok Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Electro-hydraulic swing arm punching machine Manufacturer: Sandt Model: ST 137 with operating manual Pressing force: 8 tons Table: 700 x 360 mm Punching head: 300 x 500 mm Maximum installation height: 215 mm Dsdoyy S H Nepfx Affjkk Maximum punching stroke: 45 mm For paper, leather, cardboard 380 Volt

Condition: used, Year of construction: 2007, controller manufacturer: Bosch, controller model: PNC-P, _____ Dodpfsyzv Rusx Affskk Description: Control : Bosch PNC-P Movement X/Y/Z : 2070/1280 mm Technical specifications Working area:2070 x 1280 mm (2500 x 1280 mm with extension) Punching force:165 kN Max. sheet thickness:6.4 mm X- and Y-axis speeds:80/55 m/min C-axis (rotations):180 rpm Punching cycle rate:600 cycles/min Marking cycle rate:1300 cycles/min Positioning accuracy:±0.1 mm Average positioning tolerance:±0.03 mm Tools Tool stations on the linear magazine:15 with 2 clamps MultiTool:2-, 5- or 10-position Number of tools when using MultiTool:150 Rotation of all tools:360° Tool change time (single tool):4.4 sec Tool change time (MultiTool):2.2 sec Max. punching diameter:76.2 mm Max. bending height (MultiBend):25 mm Space requirements With safety light barriers, length x width:6000 x 5825 mm Height:2155 mm Weight:8000 kg Connections Total electrical power rating:14 kVA Pneumatic connection:6 bar – 8 m³/h

Condition: good (used), Tränklein BRM 500 spine rounding machine, two machines available: one with a manually adjustable table and the other with an ELECTRICALLY HEIGHT-ADJUSTABLE TABLE. Working width: 50 cm. Both machines are in good condition and ready for immediate use. Dkodpfoyymzbjx Affok

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Euromac hydraulic punching machine Type CX750/30/2000 Dksdpsyxmhljfx Affjk Capacity 30 t Y-axis reach: 1000 mm X-axis reach: 2000 mm X-axis reach with repositioning up to 10,000 mm CNC control: Euromac Eurowin 6-station multitool + with 6-station die holder

Condition: excellent (used), Year of construction: 1996, Trumpf TC500-1300 including Sheetmaster, powered on Dodpfoyybc Hox Affskk

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Dodpfx Afsvf I Ibsfskk Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Multiple models available from stock.

Condition: new, Year of construction: 2023, Sunrise punch-cutting machine IW-80SD IW-80SD Specifications tonnage 80ton Dksdpsvf I Rcofx Affek punching capacity ᴓ 26x22mm/ᴓ 50x12mm discharge 510mm angle bar 150x150x12mm 90⁰ strip 460x15mm / 300x20mm Weight 2550 KG Multiple models available from stock.

Condition: ready for operation (used), * Brand: SBM Austria * Model: hopper with vibrating chute and screening machine * Type: Grizzly Dodpfx Aeywm Rdsffekk * Dim. hopper: 6000 x 2500 x 1000 mm * Vibrating chute: length 3500 mm - width 1200 mm. * Driving: 2 pieces vibration motors of each 3,5 kW. * Surface screen: 2200 x 1200 mm. * Driving: 11 kW E-motor.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 48,746 h, machine/vehicle number: 9310, control type: CNC control, degree of automation: manual, actuation type: electric, controller manufacturer: Siemens, controller model: 840D, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF2400 TURBO, laser hours: 22,504 h, laser power: 2,400 W, punching force: 22 t, punching diameter: 76 mm, stroke rate (min.): 600 1/min, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, table length: 6,500 mm, table width: 1,250 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,370 mm, feed rate X-axis: 90 m/min, feed rate Y-axis: 60 m/min, positioning speed: 108 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 200 kg, oil tank capacity: 138 l, power: 70 kW (95.17 HP), input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 7 bar, overall weight: 20,000 kg, total length: 8,100 mm, total width: 7,500 mm, total height: 2,400 mm, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TRUMATIC TC600L Y1300 Used laser/punch combination machine. Djdpfx Ajyzhqmeffjkk Good overall condition. Fully operational. Machine still in production. Maximum format in combined operation: 2585 x 1280 mm. Maximum format in LASER operation: 3085 x 1280 mm. Maximum format in punching operation: 3085 x 1370 mm. Hours powered on: 48,746 h Laser beam operation hours: 2,159 h Activated options: tapping, Multi Tool.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Serial number: 134361 Year of manufacture: 2012 Control: Fanuc series 160 I PB Max. sheet size: 3000 x 1500 mm Machine weight: 15,100 kg Dksdpfxoyyk Urj Affsk

Condition: used, Year of construction: 2005, Finn-Power C5-25 - Sheet Metal Processing Center / Nibbler - Siemens Sinumerik 840 D CNC control - Comprehensive accessory package with approx. 400 tools - Various spare parts included in the scope of delivery - Including machine enclosure - Machine is still operational - Approx. 12,000 operating hours - Year of construction: 2005 Technical Data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42...X2542) - Max. X-axis traversing speed: 90 m/min - Y-axis length: 1317 mm (Y-25...Y1292) - Max. Y-axis traversing speed: 60 m/min Stroke Speeds: - Marking: 3000 strokes/min Djdpfx Afeyx Ib Hjfskk - Max. number of strokes (1 mm increment): 1100 strokes/min - Hole-to-hole (25 mm increment): 420 strokes/min - Pitch (250 mm increment): 150 strokes/min Punching: - Punching force: 300 kN - Punching stroke: Servo-hydraulic - Stroke depth: Numerically adjustable - Stroke length: Programmable - Stroke speed: Programmable Tools: - Tool stations: 20 - Max. punch diameter: 89 mm - Tool turret rotation: 23.8 rpm - Tool change time: 1 - 3 s CNC Index Tools: - Number of rotating stations: Standard 2 / max. 10 pcs - Max. punch diameter: 89 mm - Max. tool rotation speed: 166 rpm - Clamps: 2 pneumatic units - NC program memory: 1500 kB Punching accuracy according to LKP Test 7100: - Max. approach accuracy (X/Y-axis): 0.1 mm - Max. hole-to-hole distance deviation (X/Y-axis): ± 0.05 mm - Angle deviation: ± 0.1° Positioning accuracy according to VDI/DGQ 3441: - Positioning deviation Pa (X/Y-axis): ± 0.04 mm - Positioning deviation Ps (X/Y-axis): ± 0.02 mm Installation: - Electrical connection: 80 KVA - Average power consumption: 30 kW - Average compressed air consumption: 2.5 Nl/s - Max. compressed air consumption: 5 Nl/s - Min. compressed air supply: 6 bar - Oil tank capacity: 400 l - Machine weight: 12,000 kg

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Condition: used Machine type: Punching machine Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale. Djdpfx Afoyzl Txefokk

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, punching force: 20 t, 1 Used Amada EM 2510 NT Servo Electric Cnc Punch Press For Sale Dsdpfx Afeyyck Sefekk Make: Amada Model: EM 2510 NT Punching Force: 20 Tons (200 kN). Axis Travel (X/Y): 2500 x 1270 mm (expandable for larger sheets) with reposition Turret Configuration: Typically 45-stations with 4 Auto-Index stations. Control System: touchscreen control. Positioning Accuracy: Servo-Electric Drive: Replaces hydraulic systems with a, single AC servo motor (AE) or twin-drive (EM) system. This reduces energy consumption, eliminates oil changes, and minimizes maintenance. High Speed and Productivity: Capable of up to 900 hits per minute for marking, and 370 hits per minute on 1-inch centers. AMNC-F/3i Control: User-friendly, touchscreen interface for fast, error-free operations. Environmental Efficiency: The machine requires a low 19 kVA power hookup, drawing less than 5 kW at maximum power. Quiet Operation: Uses brush-type tables to reduce noise and prevent scratching on the underside of sheets. Tooling Efficiency: Features a "Triplet Track" turret and power vacuum die system to reduce tool changes and prevent slug pulling.

Condition: good (used), Year of construction: 2012, operating hours: 21,200 h, functionality: fully functional, Model Heidelberg Varimatrix 105 CS, automatic die-cutting machine for die cutting, creasing, and embossing, year of manufacture 2012, format: min. 350 x 400 mm, max. 750 x 1050 mm, speed: max. 7,500 sheets/hour, operating hours: approx. 21,200, Incoterm: loaded on truck, assembly condition: in production, non-stop sheet feeder with pre-piling device, non-stop delivery with gripper edge removal, elevated by 30 cm including platform height extension, three-phase auto-transformer, hold-down device for thin or wavy material, fine adjustment system for die-cutting plate, small sheet device (min. sheet size 300 x 350 mm), mechanical double sheet control, side lays on both operator and drive side, stripping device at delivery, standard stripping frame, quick-lock chase with fixed make-ready plate, stripping station, touch-screen control, Centerline system, without compressor. Delivery date: 05-2026 Dkodpfx Afoyw H Dqofok

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Dodoyzdvlopfx Affokk Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.