Used Punch And Bind Machine for sale (71,016)

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. Bedpfjzdazbsx An Uewr The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. 380V power supply Manufacturer: Gantenbein, Switzerland Bwsdjzdaxyepfx An Ujr

Condition: good (used), Kolbus VDB Cover bender This machine is in very good condition and ready to use. Bodpfx Anszdavfe Uewr Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Power supply: 380V Weight: 150 kg

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Bwodpfx Aezdat Rsn Uor Format: 400×300 mm Pressure: 3 tons Made in Germany.

Condition: good (used), Bookbinding press with tapping block The machine is fully operational and ready for use. Bwsdpfx Anozdatqo Uor Approximate format: 480 x 330 mm 3-ton pressure

Condition: used, working width: 500 mm, Electric edge banding machine with integrated grooving unit. Feed width approx. 500 mm Bsdpfx Aneytxw Ho Uowr The following glue application rollers are included (the glue tank can be adjusted to match the width of the required glue roller): 1 x 13 mm width 1 x 15 mm width 1 x 17 mm width 1 x 19 mm width 1 x 21 mm width 1 x 23 mm width 1 x 25 mm width 1 x 27 mm width 1 x 33 mm width

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Excellent condition No heavy use Bodpfozc Rucox An Uswr

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Bwedpfx Aneh Eh U Ro Uer Paper format: ca 31x45cm

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch Bwjdpfxewrkcyj An Uer

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet - Fanfold - Magnetic stripes - Air shock web width 360 mm Bwsdpfsw Ec U Isx An Usr

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Bwjdpfxey Dgrnj An Usr Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2017, Equipment: CE marking, emergency stop, foot remote control, HYDRAULIC PUNCHING MACHINE FICEP MOD. SP 40 Good used in excellent conditions cCE. Power exerted: Ton 40 Maximum punching diameter on thickness: mm 32 x 10. Bwedpfx Aswm Emvsn Uer Recess: mm 510 Working height: mm 955 Stroke length (punch) from 0 up to mm 40 Net weight: kg 860 Dimensions: mm 1365 x 665 x 1700 (h) Motor power kw 4. Large hole device up to diameter 46mm included in the supply.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, actuation type: hydraulic, punching force: 80 t, punching diameter: 32 mm, sheet thickness (max.): 20 mm, oil tank capacity: 70 l, overall weight: 2,600 kg, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Combined Punching and Shearing Machine Tagliaferri FICEP MOD. 805N. Hydraulic. Twin-cylinder. Used, CE certified. Year of manufacture: 2000. In perfect working condition. Punching force: 800 kN. Punch stroke length: 0 to 40 mm. Maximum punch diameter: 32 mm. Maximum thickness: 20 mm. Round bar cutting: diameter 45 mm. Square bar cutting: 45 mm. Angle bar cutting at 90°: 130x130x14 mm. Angle bar cutting at 45°: 80x80x8 mm. SHEAR FOR FLATS: Blade length: 460 mm. Flat 450x15 mm. Flat 350x18 mm. Flat 200x21 mm. Flat 100x25 mm. At 45°: 100x100x16 mm. RECTANGULAR NOTCHER: Flats: 13 mm. Notcher width: 50 mm. Notching depth: 100 mm. Bedpfxeywtx Ie An Ujwr Flats: 10 mm. Notcher width: 127 mm. Notching depth: 63.5 mm. Working height: 955 mm. Approximate weight: 2,500 kg. Motor power: 7.5 kW. The machine is supplied with various punches.

Condition: good (used), Year of construction: 2017, operating hours: 48,888 h, functionality: fully functional, X Working area max.: 2000 mm (without repositioning) Y Working area max.: 1250 mm Operating hours: 48,888 hours Control system: Bosch PNC-P Machine - C-frame - Coordinate guidance - Linear magazine with 15 positions for clamping claws and tools - Hydraulic clamping claws (2 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable pressure plate - 1st stop pin (right inside) - Dividing slide Punching head - Electro-hydraulic punching head - Rotatable mono-tool holder - Programmable pressure plate position - Tool length compensation - Spray lubrication for the punch - Punch slug extraction - Forming function Control system - TRUMPF control system based on Rexroth IndraMotion MTX - Operating panel with 15" TFT color screen - Integrated technology data Bodpfeza E Hujx An Uowr - Teleservice interface via the internet - Automatic shutdown - Program management - Production plan Data transfer - USB interface - RJ45 network connection Safety - CE marking - Multi-beam light curtains - Rapid shutdown of drives Extended standard equipment - Ball tables - Chip container - Initial oil filling - Additional clamping claw - Foot switch for start - Bulge detection - Vibration-damped installation - 5 RTC cassettes with die holders

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control Bsdpfxjza Eu Ee An Uewr - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 1992, Hydraulic hole-punching machine, manufacturer: Häwa, year of manufacture: 1992. Operating pressure: 400 bar, with electrically adjustable height-adjustable support table. Bwodpfsgbk R Ujx An Uor Machine is ready for operation.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm X-axis speed: 80 m/min Y-axis speed: 55 m/min Bwedozapqdspfx An Usr Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, control type: CNC control, laser type: fiber laser, power: 2 kW (2.72 HP), warranty duration: 24 months, Equipment: CE marking, The Yawei HPML30510 is a combined laser punching and cutting system for highly precise and efficient sheet metal processing in industrial applications. The machine combines servo-electric punching with laser cutting, achieving high processing speeds while maintaining low energy consumption. Thanks to its robust construction, automated systems, and modern CNC technology, the HPML30510 is particularly suitable for demanding series production. This is a measuring machine, in stock, immediately available, in new condition, and is offered with delivery (within Germany), commissioning, warranty, etc. Operating Mode: Servo Punching / Laser Cutting Punching Force: 294 (30) kN (tons) Laser Power: 2 kW Max. Processing Size (Punching): 1600 x 3000 mm Max. Processing Size (Cutting): 1500 x 2500 mm Max. Material Thickness: 6.35 mm (ball) / 3 mm (brush) Bodpoy U E H Esfx An Uowr Max. Punching Diameter: 88.9 mm Stroke Rate: 2000 cycles per minute (cpm) Punching Frequency (1 mm pitch): 700 cpm Punching Frequency (25.4 mm pitch): 400 cpm Accuracy (Punching/Cutting): ±0.10 mm Combined Accuracy: ±0.15 mm Clamps: 4 pcs Tool Stations: 38 pcs CNC System: Siemens 840Dsl CNC Axes: 11 Max. Sheet Metal Speed: 102 m/min Turret Speed: 30 rpm Max. Load: 180 kg Dimensions (Length): 8000 mm Dimensions (Width): 8000 mm Dimensions (Height): 2300 mm Machine Weight: 20000 kg

Condition: good (used), . Technical data . Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Bwsdpozg Tfksfx An Uor Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: ready for operation (used), Year of construction: 1995, operating hours: 51,658 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS Sheet width: 2,500 mm Sheet length: 1,250 mm Sheet thickness: 8 mm Punching force: 220 kN MACHINE DETAILS Bwsdpfx Anjy U U Npe Ujr Operating hours: 51,658 h Machine weight: approx. 11,050 kg EQUIPMENT - TRUMPF Sheetmaster

Condition: ready for operation (used), Year of construction: 2014, operating hours: 65,000 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, workpiece weight (max.): 200 kg, Machine with SheetMaster TECHNICAL DETAILS Travel range of the X-axis during punching: 3,050 mm Travel range of the Y-axis during punching: 1,550 mm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Punching force: max. 220 kN Stroke rates Punching stroke rate at 1 mm: 1,350 min⁻¹ Marking stroke rate: 3,000 min⁻¹ Part removal Part size, part flap during punching: max. 500 x 500 mm Part size, fixed chute during punching with a moving table: max. 80 x 50 mm MACHINE DETAILS Operating hours: 65,000 h Space requirement: 7,395 x 6,540 x 2,072 mm Power consumption, auto-shutdown active: 0.5 kW Power consumption during production: 9.5 kW Bwedpsy U Ut Iofx An Usr

Condition: ready for operation (used), Year of construction: 2008, operating hours: 59,000 h, functionality: fully functional, punching force: 18 t, working width: 1,270 mm, working height: 2,540 mm, punching diameter: 76 mm, sheet thickness (max.): 6 mm, TECHNICAL DETAILS Working area: 2,540 x 1,270 mm Punching force: 18 t Sheet thickness: max. 6.4 mm Workpiece weight: max. 150 kg Punching diameter: max. 76.2 mm Speed: max. 90/60/108 m/min Accuracy: 0.1 mm MACHINE DETAILS Control system: Bosch Type 3 Length: 5,500 mm Width: 5,900 mm Height: 2,200 mm Weight: 11,400 kg EQUIPMENT Bwsdpfx Aoy U Ub Son Uer - Sturdy, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 19 tool stations - 2 clamping devices - Drives with maintenance-free AC servo motors - Follow-up device with programmable dwell function - Ball tables - Partial slide 180 x 200 mm - 2 finished parts containers - Chip container - Automatic shut-down

Condition: defective spare-parts repository (used), Year of construction: 1995, Euromac hydraulic stamping machine Inventory no. 3723 * Manufacturer: Euromac * Type: XP 950/30 CNC * Capacity: 30 tons * Table size: mm * Stroke rate: 180 strokes/min * Table size approx. 4000 x 1300 mm Bjdpfx Anozd Hv Re Uswr * Cabinet with accessories * Electrical fault

Condition: good (used), Universal punching machine Bodpfxoiki Dbo An Uewr Dimensions: 145x120x210 cm LxWxH

Condition: good (used), Year of construction: 1985, FOR SALE: Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bedpfx Anoy Shgpe Uowr Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.