Used Operational Task for sale (24,606)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,317 h, functionality: fully functional, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller model: Hurco Max 5, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,067 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Spindle speed (max.): 12,000 rpm Spindle power: 18 kW Spindle torque: 239 Nm MACHINE DETAILS Control model: Hurco Max 5 Dkedpfx Ahexrdxls Usw Weight: 7,100 kg Operating Hours Spindle hours: 3,317 h Operating hours: 8,634 h EQUIPMENT 40-position automatic tool changer (ATC) Internal coolant supply 20 bar Renishaw probe OMP60 Renishaw laser Software package DXF Software package for tool measurement Software package for workpiece measurement Software package NC Conversational Merge Software package tool change optimization

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 126 0647, KOLBE MWE 52 mixer-grinder with CARS HKW 200 crate lifter! MACHINE DETAILS Power: 10.0 + 1.1 kW Connection voltage: 400 V Frequency: 50 Hz Control voltage: 24 VAC Operating voltage: 400 V Dedpfexrt Nyox Ah Uokw Rated current: 20.5 + 2.8 A

Condition: ready for operation (used), Year of construction: 2004, operating hours: 32,200 h, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! The machine spindle was replaced in 2022! TECHNICAL DETAILS Dsdpfx Ajxtnv Deh Ujkw Travel Distances X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Work Area Distance between table and spindle nose: 150–650 mm Table dimensions: 1,100 × 600 mm Spindle Max. speed: 24,000 rpm Power: 29 kW Tool holder: HSK-A63 Feed Rates Feed rate max.: 20,000 mm/min Rapid traverse (X/Y/Z): 20,000 mm/min Tool Magazine Tool magazine: 20 tools Performance & Precision Total power consumption: 47 kVA Positioning accuracy (X/Y/Z): 0.004 mm Repeatability (X/Y/Z): 0.002 mm MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Machine dimensions (L × W × H): 3,010 × 3,716 × 3,100 mm Machine weight: 11,000 kg Operating hours: approx. 32,200 h EQUIPMENT XYZ telescopic cover Direct torque limiting coupling Cooler, 1°C above ambient temperature in the workshop Chip conveyor Electronic handwheel Tool length probe HH TS 120 Documentation

Condition: ready for operation (used), Year of construction: 2000, operating hours: 7,487 h, functionality: fully functional, machine/vehicle number: 23MS0122, turning length: 492 mm, turning diameter: 290 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, swing diameter over bed slide: 550 mm, controller model: Fanuc Series 18-T, TECHNICAL DETAILS Capacity Swing diameter over bed: 550 mm Swing diameter over cross slide: 390 mm Maximum turning diameter: 290 mm Maximum turning length: 492 mm Travel X-axis travel: 205 mm Z-axis travel: 580 mm C-axis: 360° (0.001° increment) Spindle Maximum main spindle speed: 4,500 rpm Maximum sub-spindle speed: 6,000 rpm Chuck diameter: main spindle 210 mm / sub-spindle 135 mm Spindle bore: main spindle 76 mm / sub-spindle 45 mm Driven Tools Speed range: 6,000 rpm Feed Rates Rapid traverse X-axis: 20,000 mm/min Rapid traverse Z-axis: 25,000 mm/min Turret Number of tool stations: 12 MACHINE DETAILS Control: Fanuc Series 18-T Dimensions & Weight Dimensions (L x W x H): 3,320 x 1,700 x 1,740 mm Weight: 4,240 kg Dkedpsxrz Ukjfx Ah Uew Operating Hours Cutting hours: 7,487 h Power-on hours: 62,730 h EQUIPMENT Chip conveyor Sub-spindle Driven tools Tool presetter Workpiece catcher Box with collets 5x additional driven tools Bar feeder

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Djdjxr U T Tepfx Ah Uokw Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,600 h, functionality: fully functional, machine/vehicle number: MJ1-1139, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 0i-MF PLUS, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 800 mm Z-axis travel: 710 mm Max. spindle speed: 6,000 rpm MACHINE DETAILS Control: Fanuc 0i-MF PLUS Coolant supply: 46 bar Dodpfx Aoxt E Ahoh Uekw Total weight: 17,000 kg Spindle operating hours: 1,600 h EQUIPMENT Chip conveyor Table shower system (Grundfos SPK4-8) TSC cooling system with Grundfos MTR3-36/CRK2-260, 46 bar/60 Hz Mahle filter Renishaw NC-4 laser tool measurement system RMP-60 spindle probe

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,716 h, functionality: fully functional, machine/vehicle number: 0144, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Dkodpfsxr Nuxsx Ah Uow Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17,716 h

Condition: used, Year of construction: 2003, The Mueller Martini CB 16 stacker, manufactured in 2003, is a robust and efficient solution for stacking and organizing printed materials. With a format of 500 x 340 mm, this stacker is currently in production and located in the United States. The delivery terms are FCA (Free Carrier), meaning the seller delivers the goods, cleared for export, to the carrier appointed by the buyer. The machine is in good condition, ensuring reliable performance for various stacking tasks in printing and finishing applications. Format: 500 x 340 mm Equipment: Good condition without any damage Dkedpfx Aovmnfpjh Usw

Year of construction: 2014, operating hours: 78,610 h, condition: ready for operation (used), This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information. Dkedpfexpywfjx Ah Usw Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2009, operating hours: 51,610 h, functionality: fully functional, machine/vehicle number: 11580008963, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC 530, table width: 600 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 730 mm Y-axis: 560 mm Z-axis: 560 mm C-axis: 360° B-axis: +120° ~ -120° Table Table size: 1,000 mm x 600 mm Maximum workpiece weight: 800 kg Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-63 Spindle motor power: 19 kW Tool Magazine Number of tool stations: 60 Dedpfxsxrzt He Ah Uokw MACHINE DETAILS Control: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 3,450 x 2,450 x 2,650 mm Weight: 8,000 kg Electrical data Apparent power: 49.7 kVA Maximum current draw: 72 A Rated current: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating hours Machining hours: 51,610 h Control on hours: 115,006 h

Condition: used, machine/vehicle number: 008232, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Max feed speed: 8 m/min Dkedpfx Ajxf Dtpjh Uew Maximum panel thickness: 40 mm Operating Units: 5 nr

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed Dkedoixqg Njpfx Ah Ujw

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Dksdpfx Aoxdn Nrjh Usw Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: $215,000 USD or best offer Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25653, Equipped with: -Automatic Central Lubrication System -Machine Guard -Indramat - MTX and Sercos CNC Control -The standard machine is equipped with CNC-control make Indramat - MTX and SERCOS-interface -Tool Dressing (Automatic dressing cycle of the dressing master and honing wheel tip diameter by a diamond coated dressing roll. The dressing cycle of workpieces can be pre-selected) -Electronic Indexing Unit -Operator and Maintenance Manual -All Electrical Drawings -PLC Language in English -Software and Hardware for Remote Diagnosis -High Precision Control of the Stock Allowance Material -Manual Loading on Spindle for Prototypes -Software for Infeed Optimized Cycle Type Reduction (Adaptive Honing) -Software for Vario Speed Dressing -Software for Calibration of Master Gears -Software for Timing Gears (including additional sensor for the hole of 4mm) -Software for Shortening of Workpiece Change-Over Time -Clamping Cylinder -RITTAL Cooling Unit -Lighting for Working Area -Installation of Vibration Detecting Sensors -Coolant Unit -Electrostatic Oil Mist Exhauster IFS With Rigid Piping Dodow Iquyjpfx Ah Uokw -Internal Automation -Pallet Ring Conveyor System FlexLink (L-form shape see approved layout) -Parallel - Double Gripper -Pick and Placer Between Pallet Conveyor and Internal Loader -Extended Loading Length of the Pick and Placer Specifications: Workpiece: -Part Diameter: 20-150 mm -Maximum Face Width: 70 mm -Part Weight: 20 kg -Number of Teeth: 6-150 -Module: 1-5 mm Workpiece Spindle: -Maximum Speed: 6000 1/min -Installed Power: Approx. 25 kW Tool: -OD of Honing Wheel: 270 mm -Widths of Honing Wheel: 20-70 mm -Honing Wheel Material: Ceramics Tool Spindle: -Maximum Speed: 2000 1/min -Installed Power: Approx. 25 kW Machine: -Total Connected Load, Approx: 70 kVA -Floor Space (w x l x H): -Total Weight, Approx: 11 Ton -Bosch Rexroth MTX Control CML 85 Longitudinal Slide, Z-Axis: -Linear Drive -Drive Torque: 3,700 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 400 mm Cross Slide, X-Axis: -Linear Drive -Drive Momentum: 2,150 Nm -Infeed Speed: 60 m/min -Theoretical Infeed: 200 m/min -Drive Length, Maximum: 1050 mm Swiveling Axis, W-Axis: -AC-Servo Drive: 10,000 1/min -Setable Gear Transmission: i=5000:1 -Swiveling Angle: -90 Degrees / +16 Degrees Workpiece Spindle, C-Axis: -Direct Drive, Maximum RPM: 7,000 1/min -Drive Power: 30 kW -Drive Torque: 112 Nm -Digital Measuring System Tool Spindle, B-Axis: -Direct Drive (hollow spindle drive), Maximum RPM: 2000 1/min -Drive Power: 30 kW -Drive Torque: 150 Nm -Digital Measuring System

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: X2001/023, Titus™ is the smallest, lightest, and easiest-to-integrate laser marking head in the world. That’s exactly what makes Titus™ ("tiny tubus") so outstanding, and why the world’s smallest laser marking head will remain compact. This makes it the ideal solution wherever production environments have limited space: with Titus™, the new 20 W and 30 W fiber laser markers Y.0200-xs and Y.0300-xs are not only incredibly small, but also extremely easy to integrate. This opens up new application areas for rapid direct part marking with lasers, especially in the automotive, aerospace, and electronics industries. Thanks to its high integration flexibility, strong throughput, and significant operating cost savings, Titus™ enables customers to fully realize their marking potential. Think small. Achieve bigger. Dsdsw Nprgepfx Ah Ujkw Main fields of application: Electronics industry, automotive manufacturing, automotive supply industry, system integrators, plastics and metalworking industries, mechanical and tool engineering, marking on stationary or moving parts.

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Dedpfxjxfhvzj Ah Ujkw Gluing System: EVA Hotmelt Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 4 nr

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT Dkjdpfethg Diex Ah Uow REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: good (used), Year of construction: 2001, Equipped with: Power Stock Fanuc 5-Axis CNC Control 160M 400mm Honing Wheel X Axis Pulse Generator Coolant System w/Twin Filters Magnetic Chip Separator Honing Tool Set up for Last Job is Still in Machine Internal Diameter of Honing Tool on Machine is 14" Work Light Power Door Auto Dress 5-Part Program Instruction Book for 16M Control Instruction Book for Set-Up and Operation Dodpfx Ahjrualps Uekw Specifications: Maximum Outer Diameter: 250 (350) Minimum Outer Diameter: 30 Maximum Overall Length: 400mm Maximum Tooth Width: 45mm Module: 1.0-3.0 Cross Feed Device(Z Axis): 430mm Max. Travel Honing Wheel Cutting Feed Device(X Axis): 370 Max. Travel Honing Wheel Swing Device(C Axis): Swing Angle: +30 Degress Honing Wheel Rotation Drive Device(A Axis): Honing Wheel Spindle Speed R/Min: 500 Honing Wheel Outer Dia.: 300 (400) Maximum Honing Wheel Width: 50mm Crowning Device (Y Axis): Maximum Rocking Angle: 1.6 Degrees Motor Types: Z-Axis Drive Motor: 1.8Kw X-Axis Drive Motor: 1.8Kw Y-Axis Drive Motor: 0.7Kw C-Axis Drive Motor: 1.8Kw A-Axis Drive Motor: 2.2/3.7Kw Maximum Distance Between Centers: 600mm Center Height: 1,100mm Floor Space: 2,170W X 2,800D X 2,100H Mass Of Machine: 4,500Kg

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: MY2002/018, Y2002/034, The compact FOBA M1000 laser workstation is designed for high-quality laser marking of small components, medium-sized workpieces, and small production runs. In addition to the automotive industry and the metal, tool, and mechanical engineering sectors, this small and mobile universal marking machine is particularly suitable for medical technology, plastics processing industries, and contract laser marking (e.g., promotional items). The M1000 enables both small metallic and plastic components and series to be marked efficiently and with high-quality results. Operating in laser class 1, the marking station features a programmable Z-axis, a small work table, and a smooth manual or optionally electrically operated lift door that provides access to the interior from three sides. To cover a wide range of applications, various fiber laser markers can be integrated. Main application areas: Dksdpfx Asw Npfgjh Usw Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries, contract laser marking (e.g., promotional items). The M-Series comprises advanced manual workstations for precise and economical laser marking of small to large and geometrically complex workpieces, as well as batches and small production runs. Two housing sizes (M2000 and M3000) and three models each (B: with work table; R: with rotary table; P: with X/Y/Z axis) are available. Modern fiber and UV lasers can be integrated, as well as camera systems for marking alignment, mark inspection, and code reading. The highly productive R models: motorized Z-axis, 2-station rotary table; ideal for marking a variety of serial parts (e.g., automotive interior components, metal parts, tools, medical products such as implants or instruments). Main application areas: Automotive and automotive supply industry, tool and mold making, mechanical engineering, medical technology, plastics processing industries.

Condition: used, machine/vehicle number: 007906, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Dkedpewucm Aefx Ah Uow Corner Rounding Unit: yes Max feed speed: 32 m/min Maximum panel thickness: 60 mm Operating Units: 12 nr

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 32006, input voltage: 480 V, The Sprinter for Gears with Short Face Widths up to 100 mm The 100S Gear Shaping Machine is ideally suited for small face widths, for shaping spur and helical gears, internal and external, and for crowned and tapered gears. With only 6 m2 the 100S is one of the most compact machines of its class. Equipped with: Siemens Sinumerik 840D SL Control Hydraulic System 180 Degree Load System HSK-63 Spindle Auto Stroke Adjustment Chip Conveyor Chip Basket Flexlink Automation Festo Pneumatics Rittal Panel Conditioners Chiller 480/3/60, 35 KvA Motor & Controls Specifications: Workpiece With External Gear: -Largest Module (Steel W/Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Diameter: 100 mm Workpiece With Internal Gear: -Largest Module (Steel With Approximate 600 N/mm2): 3 mm -Maximum Width: 26 mm -Maximum Swing Diameter: 150 mm -Maximum Internal Diameter: 100 mm Tool: -Locating Cone In The Cutter Spindle: HSK-D63 -Diameter Shaping Spindle: 85 mm -Maximum Stroke Length: 30 mm Machine Travel Distances: -Radial (X-Axis): 180 mm -Column Tilting (B-Axis): -1 - +11 Degrees Machine Workpiece Table: -External Diameter: 220 mm -Clamping Diameter: 160 mm -Bore: 63 mm Speeds: Dkodpfx Ahjrtrvye Uew -Feed Rate X-Axis: 12,000 mm/min -Workpiece Table (C-Axis): 0-400 min-1 -Cutter (C2-Axis): 0-300 min-1 -Spindle Stroke (A-Axis): 500-3,000 min-1 Electrical Equipment: -Operating Voltage: 480V -Supply Voltage: 115V -Control Voltage: 24V -Frequency: 60 Hz -Connected Load of Machine: 35 kVA -Cable Cross-Sectional Area: 35 mm2 -Protection: 80 A Machine Overall Dimensions (L x W x H): 3,380 x 3,950 x 3,015 mm Weight of Machine: 7,800 kg

Condition: used, machine/vehicle number: 007699, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Dkodpfx Ahsvap Eko Uow Operating Units: 9 nr

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Dkjdsxaqa Sjpfx Ah Usw Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Dedpsw Idc Rofx Ah Uskw Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Dksdow Idc Djpfx Ah Usw Corner Rounding Unit: yes Maximum panel thickness: 12 mm Operating Units: 9 nr