Used Operated for sale (29,028)

Condition: used, Year of construction: 2014, machine/vehicle number: AH /117836, functionality: fully functional, year of last overhaul: 2025, Equipment: documentation/manual, Ideal machine for edge banding of solid wood panels MACHINING CAPABILITIES: - Panel height (thickness) to be machined: 8 to 60 mm - Router pass: max. 90mm², 0 to 3 mm - Minimum panel length to be machined: 140 mm with an edge thickness >3 mm 200 mm with an edge thickness between 3 and 12 mm - Panel width to be machined: up to 2000 mm - Edge thickness: 0.4 to 3 mm in coil form, up to 12 mm in strip form Panel overhang relative to the chain (part protrusion): min. 30 mm - Edge width: recommended overhang: panel thickness + 4 mm - Feed system (2 feed speeds) 18 m/min for thin edges 12 m/min for strip edges (solid wood) - Distance between parts (depending on feed speed): recommended min. 800 mm MACHINE COMPOSITION: - Unwinding table, useful diameter: Ø780 mm - Electric positioning infeed guide - Chain conveyor belt, work surface height from the ground: 96 cm - Front extension table with rollers (serves as a support up to 2 m) - RT-E sanding unit (edge trimmers or routers) 2 x 4 kW, 9000 rpm Gsdpfxjzcpixj Acijiu - VC gluing unit Infrared preheating of the edge Pre-feeder for EVA granules, indicative consumption 8.5 kg/h "Fastblock" glue pot, pneumatic pre-cutting shear Pressing with 4 rollers, including 1 motorized roller, pressure with electric adjustment - K-SEL end trimming unit Rotation speed: 12000 rpm, motor inclination from 0 to 15° - RFK top/bottom flush trimming unit Rotation speed: 12000 rpm - RI 800 chamfering/flush trimming unit with copy pad Rotation speed: 12000 rpm, spindle inclination from 0 to 25° - GLC compact sanding unit, 1400 rpm Belt: 75 x 2700 mm, inclination from 0 to 5°, adjustable pneumatic pressure - SPN polishing station with textile polishing brush - Motorized operator return, useful width 1 m, with 2 roller tracks, spacing 34 cm Air cushion track and belt conveyor. Arrival height from the ground: 79 cm OTHER CHARACTERISTICS: - General power supply: 400 V, three-phase + N + T, 50 Hz - Installed power: IN 52 A nominal - Pneumatic supply: 8 - 10 bars, dry air, working pressure: 6 bars - Extraction: 6 x Ø50 mm, 1 x Ø80 mm, minimum flow rate 3000 m3/h - CE marking, lockable disconnect switch, emergency stop buttons

Condition: good (used), Year of construction: 2020, operating hours: 22 h, Internal Article No.: 25019 Scrubber Dryer Nilfisk BA 751 Serial No.: 3510172302 101 Year: approx. 2020 / 2021 (not visible) Gsdpfxjwq Nd Te Acioiu Only approx. 21.5 operating hours! The machine works perfectly and will continue to be used until sold. Therefore, additional operating hours may be added.

Condition: used, Year of construction: 1973, pressure 28 t distance between columns 510 mm dayligth 380 mm stroke 260 mm Gsdpev Svc Tofx Acisiu weight of the machine ca. ca. 750 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,778 h, load capacity: 4,000 kg, lifting height: 3,320 mm, fuel type: diesel, gearing type: automatic, Equipment: adjustable boom, cabin, lighting, pallet forks, Still R70-40 with only 2777 operating hours Full cab, low overall height Hydraulic fork adjustment Gedpfx Acjzcm D Tjisiu Large tires for off-road use

Condition: used, Year of construction: 1964, pressure:80 kN distance between columns:650 mm table-size:600 x 500 mm stroke:300/400 mm Gjdpfx Acscxxpueijiu :465 mm dimensions of the machine ca.:2,10 x 1,20 x 1,20 m

Condition: used, Year of construction: 1960, pressure 10 t distance between columns 260 mm dayligth 210 mm table surface area 275 x 260 mm Gijdpjwl N Saofx Aciou

Condition: used, CNC Universal Tool Grinding Machine SCHÜTTE Type BU 400 CNC 4 Machine - defective - without control system Machine not operational - electrically non-functional - without CNC controller Serial No.: Year of manufacture: 1990 4 axes (X, Y, Z, and R) Table clamping surface 1300 x 250 mm Distance between centers 700 mm Gisdpfx Aced Rmcmoiju Center height 155 mm Grinding length (X-axis) max. 400 mm Grinding width (Y-axis) max. 260 mm Grinding spindle speed max. 6000 rpm Grinding spindle drive 3 kW Power supply 380 Volt, 50 Hz, 25 Amp. - CNC control system removed Required space L x W x H 3800 x 2400 x 2300 mm Weight 3000 kg Machine not functional, CNC control is missing. Mechanically in good condition, ideal for control retrofit Suitable as a spare parts donor or for rebuild with new control system

Condition: like new (used), Year of construction: 2024, operating hours: 252 h, functionality: fully functional, machine/vehicle number: FTR-12-1315, working width: 1,200 mm, type of input current: three-phase, total length: 2,150 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 3,490 kg, input voltage: 400 V, workpiece height (max.): 150 mm, workpiece width (max.): 1,200 mm, space requirement width: 2,200 mm, space requirement height: 2,500 mm, space requirement length: 2,150 mm, Q-Fin F1200 Deburring and Edge Rounding Machine | Year of Manufacture 2024 | Only 252 Operating Hours For sale is a Q-Fin F1200 deburring and edge rounding machine in near-new condition. The machine was installed and put into operation by Q-Fin in December 2024 and currently has only 252 operating hours. The system is ideally suited for deburring, edge rounding, and surface finishing of steel, stainless steel, and aluminum parts. The combination of a belt grinding station, four disc brush stations, and a magnetic conveying system ensures consistent and reproducible processing quality. Equipment: • Magnetic system for secure workpiece transport • 1 belt grinding station • 4 disc brush stations • HMI touchscreen operation • Quick Lock Disc System • Automatic belt height adjustment at the 1st grinding station (AGS1) • SmartLink (IXON) for remote access, diagnostics, and analysis • IXON module already integrated Current configuration: • Grinding belt Cubitron II K120 • 4 x Brush Type QL Dark Brown K80 Additional accessories: • 1 x Grinding belt K80 Technical data: • Manufacturer: Q-Fin • Model: F1200 Gisdpfxjza U Rce Aciju • Working width: 1,200 mm • Min. workpiece size: 80 x 80 mm • Max. workpiece width: 1,200 mm • Max. workpiece height: 150 mm • Net weight: 3,490 kg • Dimensions (L x W x H): 2,150 x 2,200 x 2,500 mm Location: Bünde, Germany Selling price: 93,500 EUR plus VAT Special features: • First installation by the manufacturer in December 2024 • Only 252 operating hours • Ready for immediate use • Very well-maintained condition • Inspection and demonstration possible by appointment We will gladly send further technical information, photos and videos upon request.

Condition: excellent (used), Year of construction: 1994, Low-speed machine with hydraulic moving floor. Rotor width: 840 mm. Motor: 18.5 kW. Hopper with lid included. Ready for operation. Only 3400 operating hours. Gsdpfx Acox Ilp Hoijiu

Condition: good (used), Year of construction: 2011, Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Unit, Control Panel, Keyboard, Control Panel Teach Pendant -Manufacturer: Heidenhain, Operator Panel -Origin: MIKRON, Operator Panel from CNC machining center type VC500D -Control type: TNC 355 -MDI Unit: -Interface: -Operator Panel: -Individual components: see photos -Submission/Price: complete -Transport dimensions: 485/1850/H995 mm -Weight: 60 kg Gsdpjy H I Rdjfx Acieiu

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound insulation hood DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With integrated refrigeration dryer, 660 l suction capacity, 520 l output volume - 10 bar - Weight: 245 kg - Sound-damping hood - Condensate drain 4 kW, 400 Volt Giedoypkr Ujpfx Aciju - Width: 960 mm, Depth: 740 mm, Height: 1905 mm - Noise level: 69 dB (A) - Barely any operating hours - IN ABSOLUTELY AS-NEW CONDITION Transport possible at extra cost!

Condition: new, Four-shaft shredder in very good condition with only 1200 operating hours. Year of manufacture: 1998 2 x 7.5 kW motors. Giedpfxoy T Hbuj Acisu

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Gijdpfx Ajy E T A Ajciou Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: excellent (used), For sale: Professional fire-fighting pump METZ TS 8/8 manufactured by METZ Feuerwehrgeräte GmbH Karlsruhe. The equipment is in very good visual and technical condition and comes from a fire brigade unit. The pump is powered by a Volkswagen type 122 engine with 25 kW output, renowned for its durability and ease of maintenance. A significant advantage is its low operating hours—approximately 66 hours, which is exceptionally low for equipment of this type. Technical specifications • Manufacturer: METZ Feuerwehrgeräte GmbH • Model: TS 8/8 • Standard: DIN 14410 • Year of manufacture: 1989 • Engine: Volkswagen type 122 • Engine power: 25 kW • Displacement: 1192 cm³ • Pump capacity: 800 l/min at 8 bar • Operating weight: approx. 190 kg Godpoyt H R Uefx Acioiu • Hour meter: approx. 66 hours Equipment • Pressure and vacuum gauge • Hour meter • Work lights • Firefighting quick couplings • Transport frame • Choke and throttle control Application • Volunteer and professional fire brigades • Water transfer from ponds, rivers, and wells • Agricultural operations • Fire-protection systems • Dewatering and water management duties Robust German engineering—very durable and easy to service.

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Hollow clamping cylinder RÖHM SZ-E68/115 459-109 ID No.: 426518 Serial No.: 22950 Operating pressure: max. 50 bar Speed: max. 5,000 rpm Piston diameter: 150 mm Piston rod diameter: 88/100 mm Piston stroke: 10 mm Internal diameter in cylinder tube: 68 mm Threaded connection for draw tube: presumably M79 x 1.5 mm Flange diameter: 185 mm Flange pitch circle: 140 mm (6x M12) Internal centering diameter: 101.7 mm - Flange connection towards spindle side Weight: 25 kg Required space L x W x H: 350 x 250 x 190 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. Gedpsyy Dfkofx Acioiu For hydraulic actuation of power chucks or collet chucks. Hollow clamping cylinder for hydraulic actuation of through-bore power chucks/collet chucks.

Condition: ready for operation (used), functionality: fully functional, load capacity: 210 kg, arm reach: 2,700 mm, As PLC Merkezi Bulgaria, we support our customers in every phase of their automatising process. We offer ready-to-use robot systems depending on your application needs such as palletising, milling, material handling and many more. If you already have a robot but do not know how to use it specific for your needs, we also offer custom gripper manufacturing as well as engineering services for your needs. Giodsrlm Unspfx Aciju PLC Merkezi Robotics department specialised in industrial robots such as KUKA, ABB, FANUC and Yaskawa Motoman, robotic refurbishment and engineering processes. Currently, we have an inventory of 200 robots. We also provide spare part sales, refurbishment, repairing and engineering services for industrial robotics. Our refurbished robots have a year of warranty. Please note that the price does not include shipping costs.

Condition: good (used), machine/vehicle number: 8607719 / 8412427, Equipment: rotational speed infinitely variable, 2x OZAKI lathes Gsdpfoxg R Nysx Acisiu - 1x in working order; OSL-III 8607719 - 1x defective (for spare parts); OSL-III No. 8412427

Condition: good (used), for sheet thickness up to: 8 mm flat iron: 80 x 12 mm square iron: 20 mm round iron: 18 mm weight approx.: 88 kg space required: 620 x 250 x 380/880 mm high (with/without base frame) Gijdpfxjtx Uqas Aciju

Condition: new, pressure 2,5 kN stroke 45 mm throat 90 mm Working height from to 80 - 220 mm table surface area 120 x 60 mm Gjdpfx Aefv Av Iocijiu weight of the machine ca. 22 Kg dimensions 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly.

Condition: used, CNC control in operator panel / machine operating terminal CNC path control FANUC Type A14B - 0048 - Year of manufacture: 1990 - Machine control panel - Electronic handwheel - Flexible silicone PC keyboard Dimensions (WxHxD): 600 x 260 x 350 mm Gjdpjlb I D Tefx Acijiu Weight: approx. 40 kg From a GILDEMEISTER CNC lathe. From stock, functionality not tested, ideal as a spare part donor.

Condition: used, Programming console, operator panel, robot teach pendant Giodpfjd Ab D Ssx Acisu Robot teach pendant, teach box, handheld command station, handheld panel BOSCH REXROTH Type: IndraControl VEH30.1 The VEH 30.1 is suitable for: 1. Operating and visualizing IndraLogic, IndraMotion MLC, IndraMotion MTX. 2. Setting up machines and systems. 3. Operating and diagnosing extended handling systems. 4. Visualizing simple operator panels on assembly lines. Type No.: VEH30.1BJN-128ET-G3D-128-BS-NN-FW Material No.: R911170692-104-08W34-I-B-H-T Serial number Year of manufacture: 2008 Firmware: FWA-VEH*01-CWN-01V07-EN R911310833-103 Year of manufacture: 2008 Operating system: Windows CE 4.2 Interface: 1x Ethernet (RJ 45) Nominal voltage: 24 VDC Nominal current: 0.7 A Power consumption: max. 14 W Display: 8.4" Touch TFT, 800 x 600 pixels Operation: Touch and keypad operation with 34 keys Protection class: IP65 - Connection cable approx. 8 m - 19-pin connection plug - Three-stage enabling switch - Flexible use thanks to hot-plug capability Weight: 3 kg Fully functional, tested In good condition

Condition: used, Machine not operational, control system does not start Horizontal Machining Center with Pallet Changer STEINEL Type BZ 24 FFZ with CNC Control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture 1990 Travels X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet 400 x 400 mm Giedpfxodzqmfs Aciou Pallet rotation B-axis Spindle speed max. 7100 rpm, infinitely variable Tool holder ISO 40 Power supply 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis - Coolant spray nozzles on the ram spindle and in the work area - Coolant system with chip conveyor beneath the work area - CNC Control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement (L x W x H) 9000 x 3100 x 3200 mm Weight 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine L x W x H 9000 x 3000 x 3000 mm Chip conveyor L x W x H 4700 x 1000 x 1450 mm

Condition: used, Air operated double diaphragm pump DEPA Type DH40-FA-ZRT Air operated diaphragm pump, double pump Serial No.: B1802498 Year of manufacture 09.05.2018 Temperature: max. 130°C Size: 40 Grain size: max. 16 mm Suction height: approx. 2 m Suction height product filled: approx. 9 m Operating pressure: max. 7 bar Godpfxeib D H Uj Acieiu air connection: 3/8" suction connection: 1 1/2" pressure connection: 1 1/2" - self-priming - aluminum housing - Diaphragm plate made of stainless steel - Diaphragm made of nopped E4® PTFE compound - Balls made of PTFE - Ball seats made of stainless steel Space requirement: L x W x H: 370 x 270 x 450 mm own weight: 15 kg very good condition

Condition: good (used), Year of construction: 2018, operating hours: 1,619 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 472 kg, mileage: 1,619 km, Well-functioning electric pallet truck Linde T16 from 2018; Capacity of 1,600 kg; 1,619 hours on the counter; Equipped with battery, external charger, and automatic filling system Gisdpfx Asw Tk R Sociou

Condition: used, turning diameter over bed / mm turning diameter over slide rest / mm Giodpjwgi Tmsfx Aciju turning length / mm