Edge banding machine

OTT Tornado

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, TECHNICAL DETAILS Operating Method: Single-sided, right-hand operation Edge Thickness: 0.2 – 12 mm Workpiece Dimensions Minimum Width: 70 mm Minimum Height: 8 mm Maximum Height: 52 mm Minimum Length: 150 mm Feed Speed: 10 – 14 m/min Working Height: 880 mm MACHINE DETAILS Processing Units Jointing Section with 2 HF motors, 1.5 kW Double End Trimming Unit with 2 HF motors, 0.3 kW Flush Milling Unit with 2 HF motors, 0.7 kW Fine Chamfer Mill with 2 HF motors, 0.3 kW Fine Radius Mill with 2 HF motors, 0.3 kW Corner Rounding Unit with 2 motors, 0.35 kW Scraper Unit for Plastic Edges Dimensions & Weight Machine Dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine Weight: 3,000 kg Operating Voltage: 400 V, 50 Hz Total Connected Load: 12 kW Electrical Connection: 3 x 400 V, 5 x 6 mm², fuse 35 A Hedpfsxtfchjx Aaqjw EQUIPMENT Double roller top pressure with electronic positioning Automatic coil magazine for rolls up to 800 mm diameter with pneumatic cut-off device for up to 3 mm thickness Automatic edge magazine with optical monitoring for fixed-length edge strips Infeed fence with automatic positioning after inputting the jointing value CM - CombiMelt - Modular glue application system Control system via 7-inch TFT color touch display 100 freely alphanumeric storable work programs PLC for high-resolution track control Individual frequency inverters for separate activation of processing motors Hole detection system for skipping CNC processing Network capability for integration into a data network

Condition: used, Year of construction: 2013, operating hours: 16,073 h, functionality: fully functional, machine/vehicle number: T/41521, year of last overhaul: 2025, OTT Tornado TOP + LIGMATECH EKOMAT ZHR 01/R/065 Return Device Year: 2013 The machine is equipped with: RMV-40 – Automatic edge band magazine, 0.4-3mm edge thickness, end trimming shears with roller and optical sensor for reducing edge length on the workpiece (saves edging material). Automatic edge feed hopper with optical detection for fixed-length edging pieces. Combi Melt – Gluing zone, supports EVA and PUR hot-melt adhesives, as well as all standard cleaning granulates. Machine Control: Operated via a 15-inch color touchscreen monitor, unlimited number of work programs can be sequentially saved, all preselection of processing aggregates as well as working parameters for the CombiMelt gluing system allow for full automation and maximum operator comfort. Electronic control – reference points with high accuracy +/- 1 mm. Via Beckhoff industrial PC, certain tool aggregates can be adjusted during machine operation/loading. Working Aggregates: Hsdpoxpphajfx Aaqjw -F- Pre-milling unit: For pre-milling workpieces before adhesive application. 2 HF motors, 1.5 kW, forward and reverse, automatic control. -Kc- Double end-trimming unit: With 2 high-frequency motors, 0.3 kW, 12,000 rpm. -Bfc– Rough milling cutter Heavy-duty cutter for milling solid edges from the surface and profiling before rounding radii. -Hft- Fine milling unit - Radius With 2 high-frequency motors, 0.3 kW, 12,000 rpm, double-sided, automatically adjustable. -AKF- Automated copying milling unit as a universal milling aggregate: With two independent spindles for top and/or bottom longitudinal as well as corner processing. Automatically switches from beveling for thin edge up to 1 mm to radii processing. -ZKc- Scraper aggregate R2 Double-sided processing, automatic control, for removing rounded areas. FZK: Flat scraper for removing excess edge and glue residues. -GE- Second guide operation for workpiece leading (can be folded away or towards the machine as needed). -GS- Application of glide agent to the edge. -RS Set – 4-way chemical spraying and cleaning unit. -ZKc- Scraper aggregate R1. -WE: Angular stop – ensures precise infeed of the workpiece to the edgebander. Trouble-free machine in excellent condition, regularly serviced by OTT (Asamer s.r.o.) The machine is currently operating in production and can be tested - we are processing with PUR adhesive. Available for collection end of 2025.

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: - Round pot glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for crosscutting/end cap cuts - Top/bottom milling: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing of radii - Flat scraper: for smoothing the edge surfaces - Polishing unit: 2 polishing wheels with motors for final finish - Riepe spray system - Control: PLC with operator panel - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short-term Hedpexdpm Sjfx Aaqew Location: Bavaria

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Hjdpfx Aasv Sm Hcjqow Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Weight: 3100 kg - Available immediately -

Condition: used, OTT Tornado - TOP Control - via a 15-inch color touchscreen monitor for full automation and maximum ease of use CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all common cleaning granules Joining unit for joining chipboard Automatic roller magazine Hedpfowcymcsx Aaqsw Automatic edge magazine Double end mill with automatic tilting 0° / 3° Flush milling unit - for flush milling - 12mm Fine milling RADIUS - radius milling - profile knives R2 - R5 Automated copy milling - corner rounding Scraper unit - radius Scraper unit - radius - chamfer Surface scraper unit Lubricant spray device - PU Cleaning set with fine buffing unit Very stable workpiece support with roller conveyors - FRONT with scissor extension Complete tooling included Machine is in EXTREMELY MINT CONDITION WELL-MAINTENANCE First commissioned in 2011, very few operating hours, approximately 1200 Machine from lease / leasing option from Lieboch warehouse

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: T/41242, workpiece height (max.): 52 mm, edge thickness (max.): 12 mm, working height: 880 mm, empty load weight: 3,000 kg, throughput speed: 233 mm/s, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Operation: Single-sided, right-hand version Edge thickness: 0.2 – 12 mm Hodpexa Acrefx Aaqsw Workpiece dimensions Minimum width: 70 mm Minimum height: 8 mm Maximum height: 52 mm Minimum length: 150 mm Feed speed: 10 – 14 m/min Working height: 880 mm MACHINE DETAILS Processing units Jointing unit with 2 high-frequency motors, 1.5 kW Double end trimming unit with 2 high-frequency motors, 0.3 kW Flush trimming unit with 2 high-frequency motors, 0.7 kW Fine trimming CHAMFERING unit with 2 high-frequency motors, 0.3 kW Fine trimming RADIUS unit with 2 high-frequency motors, 0.3 kW Corner rounding unit with 2 motors, 0.35 kW Scraper unit for plastic edges Dimensions & Weight Machine dimensions (L x W x H): 6,120 x 840 x 1,385 mm Machine weight: 3,000 kg Operating voltage: 400 V, 50 Hz Total connected load: 12 kW Electrical connection: 3 x 400 V, 5 x 6 mm², fuse 35 A EQUIPMENT Double roller top pressure with electronic positioning Automatic roll magazine for coils up to 800 mm diameter, with pneumatic guillotine for edge thickness up to 3 mm Automatic edge magazine with optical monitoring for strip edges in fixed lengths Infeed fence with automatic positioning when inputting the jointing value CM - CombiMelt adhesive application system in modular design Control system via 7-inch TFT color touchscreen display 100 work programs freely and alphanumerically programmable PLC for high-resolution feed control Individual frequency inverters for independent activation of processing motors Hole recognition to suppress CNC operations Network capability for integration into a data network