Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6
Manufacturer: HOMAG , Type: KF 20/30/QE/30 Softforming, Year: 1997, Control: NC 21, Year: 1997, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 220-2600, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-60, Min-max feed m/min: 5-30, Soft forming: yes, Axis control: no, Zerspanereinheit : yes, Contact milling from above and below quantity: no, Machining cracks: yes, Hot melt soft forming unit: yes, Kappaggregat : yes, Rollenmagazin : yes, Mehrfachdruckzo... more
6
Edge banding machine for softforming Brand: Homag Type: KR 79/QE/S2/1 Year: 2000 Workpiece transport device: - Conveyor chain 80 mm wide with rubber top - Hardened guidance surface - Magnetical slow-down of conveyor chain Top pressure: - With driven joined V-belt - Motorical height adjustable with digital position display Zvshhbpx Technical data: - Feed stepless adjustable: 10 - 30 m/min. - Working height: 920 mm - Working width at thin straight edge: min. 59 mm at workpiece thickness 26 mm... more
9
SINGLE SIDED SOFTFORMING EDGEBANDER 1/10300 VOLTAGE: 400V/50HZ with Neutral EU TOTAL LENGTH MM 11,727 Bcrr2dflql Suitable for edging straight or profiled edge (softforming) - PROFILING HEADS AT FRONT(4 MOTORS FOR SOFT) - PREMILLING HEADS AT FRON FOR STRAIGHT (NO TOOL CHANGE) - machine total length mm 11240 ROLL MATERIAL FOR STRAIGHT PROCESSING ... more
5
1st pass machine Fixed side at the left Working width: 1500 mm. Workpiece feed by chains Sound enclosures Equipment: Squaring part: 1+1 Shaper 4,5 kW 1+1 Jump shaper 4,5 kW 1+1 Jump shaper 4,5 kW Edging part: 1+1 Edge-magazine HL 10 for twin coil with 600 mm diameter, guilotine for edges 0,4 till 1,5 mm thickness 1+1 glueing part type QE34 1+1 4-fold pressure zone for softforming or straight edges Bcszrsj2bs 1+1 Free space for end trims 1+1 rough trimming unit, motors 0,6 kW 1+1 fine trimming... more
6
very good technsicher and optical condition, can be seen under power. Very well fitted. Ready to use. With regard to the aggregate, I ask you to look at the photos. Thank you Jtti9y more
6
"SOFTFORMING" SINGLE-SIDE EDGE BANDER LEFT-side machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 12 Panels thickness (min/max) mm 7 - 60 Numerical Control NC 16 Feeding speed (adjustable) m/min 12 - 24 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Qcqmyrbn Pre-milling Unit (vertical joint trimmers) 2 x kW 3 Glueing Unit (Hot Melt Glue + Quick Melt system) QE 34 Pressing roller (revolver) both for st... more
6

Softforming machines Homag KF 64/14/QE/35/II+500

Petershagen, GermanyGermany dealership location
6478 km
2002
used
Type: KF 64/14/QE/35/II+500, Control: NC 21, Program: yes, Year: 2002, Min-max edge material mm: 0,4-3,0, Work piece width min-max mm: 275, Min.-max. workpiece length in mm: 450-3500, Min.-max. workpiece height in mm: 12-40, Werkstücküberstand mm: 42 mm, Min-max feed m/min: 10-40, Soft forming: Tonnenprofil/R 14, Zerspanereinheit : yes, Fräsen tastend oben und unten Stück: yes, Ritzen zerspanen: yes, Profifräsen Stück: 1, Fräsen tastend von oben Stück: yes, Schmelzklebersoftformingaggregat HL 34... more
11

SOFTFORMING EDGE BANDING MACHINE STEFANI IDM ACTIVA 1/78 SOFT

ZUGLIANO (VI), ItalyItaly dealership location
6974 km
2005
refurbished (used)
SINGLE SIDED EDGEBANDER ACTIVA 1-78 SOFT C.E. already prepared for doors   ELECTRONIC POSITIONING OF TOP PRESSURE BEAM Machine composed of :   DOUBLE MILLING/PROFILING UNIT UNIT RT-E KW 4 For profling the panel be edged prior to glueing and assure an excellent surface for gluing: Technical data: Speed rpm 9000 Motor power kW 4+4   ... more
6

Heavy Duty IDM Activa ACTIVA / 1

Chełmno, PolandPoland dealership location
6993 km
2004
used
OKLEINIARKA POJEDYNCZA. Automatyczna maszyna do oklejania krawędzi na prostych profilach i po SOFTFORMINGU CECHY OGÓLNE ► Maszyna przemysłowa o zwartej konstrukcji ► Nakładany na krawędzie materiał (okleina), w zwojach: wąski i PCW do 3 mm SYSTEM I OPCJE PORUSZANIA PŁYTĄ ► Gąsienica ciągu przesuwania ► Górny dociskacz wykonany z napędzanego gumowego paska ► Górny dociskacz regulowany pod względem z kontrolera numerycznego w trybie automatycznym ► Zmienna prędkość w posuwie ciągłym z re... more
6

Edgebander softforming HOMAG KL78/E12

Torun, PolandPoland dealership location
7022 km
2001
used
GENERAL DATA Applicable banding material in coils 0,4 – 3 mm Panel thickness 7 – 60 mm Feed 12 - 32 m/min. Feed motor 5 HP Glue tank WORKING UNIT Profile milling unit - motors 2 x 4 HP (9.000 rpm) Glue application unit for soft and flat edges „E-20” - with glue feed system QA34 2 positions edge magazine - from coil (up to 3 mm) 8vbya8at8 Pressure zone for softforming End-trimming unit - motors 2 x 0,55 kW; Top/bottom milling unit FF11 - motors 2 x 2 HP ; 12.000 rpm Fine trimming unit top... more


Softformin...
daily

New machines via email!

Stay updated!

to

to

Edit search

SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close