Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
2
2gxba8l30 max. edge thickness: approx. 3 mm max. workpiece height: approx. 50 mm min. Internal radius of panel: approx. 40 mm 2 motors each 0,37 kW Combined tooling chamfer and radius Milling speed : 12000 rpm Work table height: 865 mm more
3

Edge milling automat IMA KFM

PetershagenGermany dealership location
6478 km
1983
used
Manufacturer: Ima, Type: KFM, Year: 1983, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Panel length min mm: 1250, Compressed air bar: 6, Wight approx. kg: 300, FREE TEXT: Doppelseitige Maschine zum kopieren der Ecken, Year :1983 Q8vfg9ld0 more
6

"Edge milling machine" LANGE "B 60"

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
2002
used
"Edge milling machine LANGE B 60 Workpiece width min mm: 30 Workpiece thickness max mm: 55 I0bw22nn Edge thickness max mm: 3 Inner radius min mm: 50 Radius milling: Yes Flush milling: Yes Cutting aggregate: Yes For molded parts: Yes Workpiece feed: manually Total connection kW: 1,5 Weight kg: 230 Operating status: basic functions can be shown Condition: good" more
5
sheet thickness - min. 6,0 mm sheet thickness - max. 40,0 mm cutting angle 15 - 50 ° motor 380 Volt total power requirement 1,5 kW weight 78 kg range L-W-H 790 x 740 x 405 mm Bbqjw8zdnx more
3
Bündigfräsmaschine mit Kappeinrichtung Hersteller: BRANDT Typ: F10 EK11 Baujahr: 1990 Technische Daten: zum gleichzeitigen oberen und unteren Bündigfräsen von überstehenden Kantenmaterialien an geraden Kanten sowie geschweiften Werkstücken mit Innen- und Außenradien Bestückung mit Anschlagschienen für gerade Kanten und zentrischen Auflaufringen für Formteile Werkstückdicke: ca. 12 ? 60 mm Werkstückbreite: min. ca. 30 mm Innenradius: min. ca. 45 mm Kantendicke: max. ca. 1 mm Yk7ord0l8 Fräsmot... more
6
Motor 0,18 kW Engine speed 2760 rpm Table dimensions 550x750 mm Bby372dqvg Made in Austria more
6
Edge milling machine Brandt F10 with end-trimming unit ratios 11 • Manufacturer Brandt • Milling unit top • Milling unit below • Caps saw unit • Machine no.: 53-05-323 • Built in 1986 Pr9bk3 Good condition, Funktionsgeprueft, technically in order more
2

Edge milling automat Hebrock HFF 08

PetershagenGermany dealership location
6478 km
2000
used
Manufacturer: Hebrock, Type: HFF 08, Year: 2000, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :2000 Js8rea more
6

"Edge milling machine" KÖLLE "FKF 51"

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
1994
used
"Edge milling machine KÖLLE FKF 51 Workpiece thickness max mm: 45 Main motor power kW: 1,4 Feedrate max m/min: 11 Workpiece feed: motorized Required space lxwxh: 3100x500x900 Fi9kfw7n8 Weight kg: 380 Operating status: dismantled/ stored" more


Edge milling
every day

New machines via email!

Be informed!
6
For flush- or radius milling on straight or shaped work pieces, with add. End-trimming unit EK 13 for cutting of leading and trailing edge material overstand Nbeat technical details: thickness of pieces (radius milling) approx.: 16 - 55 mm thickness of pieces (flush milling) approx.: 12 - 55 mm min. width of pieces approx.: 30 mm inner radius approx.: 35 mm (depending on type of shaping and edge radius) thickness of edges... more
3

Corner Rounding machine HolzHer 1980

More Holzher 1980
Blütenstrasse 7, 77704 Oberkirch, DEGermany
6596 km
1991
good (used)
Stationary edge trimming and corner rounding machine Hpnqevl more
5

[...] Long type B äse 600 BJ. 1997 107

Dresden/SachsenGermany dealership location
6845 km
1997
used
Fabr.: Long type: B600 model year 1997 technical data: workpiece thickness: 3 mm edge thickness: 3 mm of inner radius: min. 50 mm incl. Cap unit B61 engines: 2.0 kW M0syv more
1
Edge trimming machine SMA-REF-5561 Type: edge milling machines Manufacturer: Brandt Model: F 10 / EK 11 Year: 1990 Working range: Workpiece thickness: 12 -60 mm Ug2luegdr Edge thickness: max. 1,0 mm Features: top / bottom milling for straight edges and postforming profiles Edge cutting Condition: ready for action under power Location: Eastern Germany Dimensions: Weight: 150 kg Availability: on demand Terms of delivery: ex works free on truck Terms of payment: 100% before dismantling/loading more
5

Edge milling automat Hebrock HFF 08

PetershagenGermany dealership location
6478 km
1993
used
Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993 Bhk7aj0q more
6

"Edge milling machine" BRANDT "F 10/100"

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
1998
used
"Edge milling machine BRANDT F 10/100 Workpiece thickness max mm: 60 Edge thickness max mm: 3 Inner radius min mm: 45 Main motor power kW: 0,52 Radius milling: Yes Flush milling: Yes For molded parts: Yes Zj7vn0dv Workpiece feed: manually CE-mark: Yes Total connection kW: 1,04 Required space lxwxh: 1000x900x1450 Weight kg: 240 Operating status: basic functions can be shown Condition: good" more
2
var. 4-9 edge thickness (mm) 0,4-3 workpiece thickness (mm) 16-55 which became FTK 130 designed as a supplement to the edge banding machine L3vx9 Although also used for straight workpieces, the main use of FTK 130 in the molding area is The inner and outer radii can easily be edited FTK 130 machine length approx. 1.150 mm Weight approx. 320 kg Feed rate (m/min) manual edge thickness 0.4-3 mm Workpiece thickness 16-55 mm more
5
to the stationary form and RADIUS milling of PVC and natural veneer edge banding Workpiece thickness 8-55 mm Gvikoc Workpiece width of min 80 mm Workpiece length of min. 110 mm Softformingprofiltiefe 50 mm Edge thickness of 4 mm (depending on the edge material) Cutting tool RADIUS cutters R 3 Electrical connection 230 V / 50 Hz / 1 Ph Pneumatic connection 6bar Dimensions 740 x 460 x 500 mm Weight NET approx. 45 kg more
6
M.Nr. 0-260-03-1607, Baujahr: 1990, Motordaten: 220 V - 0,68 kw - 50 Hz, Werkstueckdicke: max. 50 mm, Druckluft ca. 7 bar, Auflageflaeche: 500 x 210 mm, Mudrx Schwabbel, Fusspedal, .. Gewicht ca. 120 kg, Aussenmasse: B/T/H ca. 800/650/1500 mm .. !!! weitere Bilder siehe PDF-Datei !!! more
3

Edge milling machine LANGE B60

D - Nordrhein-WestfalenGermany dealership location
6384 km
2005
used
Edge milling machine for Freiformkunturen. Connection: 1,5 kW, 50 Hz Wo9bc Dust nozzle: 60 mm more
6
Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50, Pi2vwsyxp more
6

"Edge milling machine" BRANDT "F 10/100"

"DE-01665 Klipphausen"Germany dealership location
6821 km
1998
used
"Edge milling machine BRANDT F 10/100 Bbwcd0kfyp Workpiece width min mm: 30 Workpiece thickness max mm: 60 Edge thickness max mm: 3 Inner radius min mm: 50 Main motor power kW: 0,52 Radius milling: Yes Flush milling: Yes For molded parts: Yes Workpiece feed: manually CE-mark: Yes Total connection kW: 1,04 Required space lxwxh: 900x650x1450 Weight kg: 175" more
1

Corner copier Hartmann-Maschinen SF6

HuellhorstGermany dealership location
6457 km
2014
as good as new (ex-display)
Compressed air operated, infinitely adjustable up to 28,000 rpm adjustable. With suitcase. Lztzjqpop more
2
High Frequenzy - Flush Milling Machine Contour flush milling machine 8jjmtsjjd Brand: Hebrock Type: HFF 08 Year of manufacture: 2010 Edge thickness max.: 3mm Workpiece thickness min./max.: 8 / 40 mm Together with Hebrock AKV 88 more
5
Code: 0203 Brand: STEFANI Model: RFT 60 - CE Standard Edge Trimming machine - CE Standard X9iyacbr High speed motors Kw 0,55 - 12000 rpm - adjustable in height Scratch-resistant work surface Overall dimensions : mm 1000 x 800 x 1350 h Weight : kg 400 more
3
Rounding milling Holz Her Tangent little used for corner rounding of ABS and veneer edges or corners including buffing Like new condition! Machine was used in a hardware store for picture frames production and is therefore rarely used U0ztoxx7e more
1
Manufacturer: Brandt Eckenkopiergerät, Type: FP 10, Edgeband thickness max mm: 3, Edgeband height max mm: 55, Working widht max mm: 80, Kopierfunktion single sided: yes, Tracing by roller: yes, Cycle time automatic: yes, Engine milling kW: 0,5, Compressed air bar: 6, Wight approx. kg: 150, Na77r0cic more
6

"Edge milling machine" POLYMAC "SPEEDY 90"

More Polymac Speedy 90
"Lager D-01665 Klipphausen"Germany dealership location
6821 km
2001
used
"Edge milling machine POLYMAC SPEEDY 90 Workpiece thickness max mm: 60 Edge thickness max mm: 3 Radius milling: Yes Flush milling: Yes For molded parts: Yes Workpiece feed: manually CE-mark: Yes Total connection kW: 1,1 Required space lxwxh: 1000x850x1350 Bbwnklav0c Weight kg: 110" more
3
RADIUS milling with curly and straight workpieces, 2 HF motors for upper and lower edge. Compound miter saw with foot switch. Workpiece thickness (RADIUS milling) 16-55 mm Workpiece thickness (chamfering) 12-55 mm Workpiece width min. approx. 30 mm Edge thickness 0.4-3.0 mm Inner radius min. approx. 50 mm Electrical supply 230V, 50 Hz, 1Ph Total connection 0.71 kW Ruhfylhxe Space requirement approx. 1000 x 700 x 900 mm Weight NET approx. 250 kg more
1
Make Brandt Type FP 10 Built in 1994 . No. 0-260-03-5313 Number of spindles 1 Workpiece thickness of Max 55 mm Workpiece width of min 80 mm Tread depth of 80 mm Inner radius min. 10 mm Edges thickness of 3 mm Milling motor 0.5 kW / 27,000 rpm. Workpiece clamping pneumatic Flush-mounted unit with cloth washer Dimensions L x W x H mm 850 x 650 x 1430 Weight approx. 120 kg Power consumption 0.5 kW B8lbfmew more
1
Manufacturer: Brandt , Type: FTK 130 Optimat, Year: 2016, Work piece width min-max mm: 30, Edgeband thickness max mm: 0,5-3,0, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Work piece width min-max mm: 30, FREE TEXT: [...]ät an der Seite, Year :2016 Baz99bzh0z more
4

"Edge milling machine" HEBROCK "HFF 08"

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
2005
used
"Edge milling machine HEBROCK HFF 08 Workpiece length min mm: 300 Workpiece width min mm: 150 Workpiece thickness max mm: 45 Edge thickness max mm: 3 Inner radius min mm: 40 Radius milling: Yes Flush milling: Yes CE-mark: Yes Declaration of CE-conformity: Yes Bbdjxfbd73 Total connection kW: 1,5 Required space lxwxh: 1350/800/1300 Weight kg: 200 Operating status: dismantled/ stored" more
6

Edge milling automat Brandt F 10/100

PetershagenGermany dealership location
6478 km
2000
used
Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000 M9i02 more
5

"Edge milling machine" HEBROCK "HFF 08"

"DE-01665 Klipphausen"Germany dealership location
6821 km
used
"Edge milling machine HEBROCK HFF 08 Gm8q0vamy Workpiece thickness max mm: 50 Edge thickness max mm: 3 Inner radius min mm: 40 Radius milling: Yes Flush milling: Yes CE-mark: Yes Required space lxwxh: 1350x850x1300 Weight kg: 180" more
6
Manufacturer: Brandt Kantenfräse, Type: Optimat FTK 130, Year: 2006, Monting of the machine: 0,5-3,0, Work piece width min-max mm: 10-55, Min.-max. workpiece height in mm: 30, Edgeband height max mm: 2, Panel length min mm: 1800, Work piece thickness min mm: 0,5, Feeding speed max m/min: 35, rotations controlled: yes, kW output motor: yes, Year :2006 Vscyg3 more
4

"Edge milling machine" BRANDT "F 10"

"Lager D-01665 Klipphausen"Germany dealership location
6821 km
1979
used
"Edge milling machine Mrusr BRANDT F 10 Workpiece thickness max mm: 60 Edge thickness max mm: 1 Flush milling: Yes For molded parts: Yes Total connection kW: 0,52" more
3

Edge milling automat Hebrock HFF 08

PetershagenGermany dealership location
6478 km
1999
used
Manufacturer: Hebrock, Type: HFF 08, Year: 1999, Barcode: 15 - 50, Monting of the machine: 0,3-3,0, Edgeband thickness max mm: hand, Panel length min mm: 24000, Work piece thickness min mm: 0,5, Outer radius mm: yes, Number of tools per tool-magazine: 350, Year :1999 9gichexsq more
1
TRIMMING MACHINE Make: VITAP Type: RC 92 New machine Technical data: - 2 high frequency motors HP.0,75 (Kw 0.55) each. 12000 RPM, in vertical opposite position with inverter; - 2 cutter heads with cutters one knife straight 15° the other radius 3mm; - CE standards Lyczf Options (available for a surcharge): - Couple of cutters (without knives) - Set 8 knives 15 degrees angle and radius 2 mms. - Set 8 knives 15 degrees angle and radius 3 mms. - Pneumatic lifting of the upper motor - Opt... more
1
Corner rounding machine Make: VITAP Type: ROUNDER New machine Technical datas: - For corner rounder and straight corners - Standard cutters 15° R2 mm or R3 mm; - Foot pedal to start the cycle; - Movable reference with mechanical digital readout; - Complete protection with safety microswitch; - CE standards Veimgjmnc Options: CUTTER R1 MM CUTTER R2 MM CUTTER R3 MM more


Edge milling
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close