Used Softforming for sale (21)

Condition: excellent (used), "SOFTFORMING" SINGLE-SIDE EDGE BANDER - Min/Max edges (band) thickness in rolls mm 0,3 - 3 - Min/Max edges thickness in strips/lippings mm 0,4 - 12 - Min/Max panels thickness mm 12 - 60 - Numerical Control: Power Control PC 22 - Feeding speed (adjustable) m/min 12 - 24 - Top motorized pressure belt - Free Space: mm ? - Glueing Unit (Hot Melt + Quick Melt System): QE 34 / E12 - Pressing Roller (Revolver) both for straight edges and shaped edges (Softforming) - Edge coils supporting unit, with N. 1 coil - Snipping Unit HL 84 (2 x Kw 0.84 at RpM 12000) - Rough Trimming unit (2 x Kw 1.5 at RpM 12000) - Fine Trimming Unit (2 x Kw 0.4 at RpM 12000) 0°-30° OPTIONAL: Infeeding system, with extended infeed fence and 3 top motorized rubber wheels Dujdjfd Ilyspfx Agdel

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Dodpfsfi Tkgex Agdeul Edges (tape) thickness in rolls (min/max) mm 3 Edges thickness in stips / lippings max mm 1,3 Panels thickness (min/max) mm 10 / 45 Working width (min/max) mm 270 / mm 1300 Numerical Control /Software ICOS open Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt SIZING PART (for each side): Pre-milling Unit (vertical joint trimmers) 75.30 (Kw 6,6 x 1) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) 04.1569 + 283.205 Pressing roller (revolver) both for straight and shaped edges (softforming) mm 1.050 Edge coils supporting unit (reels N°) 6 Snipping (end-cutting) unit 08.42 (Kw 0,2 x 2) 40 m/min Rough Trimming unit 08.055 (Kw 0,66 x 2) 0°-30° Fine Trimming unit 08.0582 (Kw 0,66 x 2) 0°-30° Glue scraping unit 08.50 Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: excellent (used), "SOFTFORMING" LEFT-side SINGLE-SIDE SIZING and EDGE BANDING Edges (tape) thickness in rolls (min/max) mm 0,4 / 3 Panels thickness (min/max) mm 8 / 60 Numerical Control / Software PC 22 / WoodCommander Adjustable feeding speed (m/min ) 10 - 40 Working line (work units support tables), manual adjustment mm 30 - 80 SIZING PART: Spraying unit (Anti-sticking liquid) Double Hogging Units KD 10 (2 x Kw 6,6) Fine Trimming unit for softforming (2 x Kw 1,85) 0°-20° Belt sanding unit (abrasive papers) for straight edge KS 10(mm 120 x 2100) Free space mm 700 Duodpfst N H Tajx Agdel EDGE-BANDING PART: Glueing Unit (Hot Melt + Quick Melt Unit) E34 softforming Pressing rollers (revolver) both for straight and shaped edges (softforming) G (4 stations) With top and bottom rolling knives (In-lay) Edge coils supporting unit E3 (No. 6 of reels) Snipping (end-cutting) unit HL 84 (2 x kW 0,8) 0°-30° (max 25 m/min) 1st Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic 2nd Fine Trimming unit 2 units x (2 x kW 0,55) 0°-30° pneumatic Milling grooving unit UF11 (1 x kW 4) 0°-90° Profile Scraping unit PN20 (Pneumatic adjustment) Finish processing unit (Glue scraper + Buffing unit) FA11

Condition: excellent (used), Double-side Sizing & Edge Banding - Independent Machine (1st &/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 0,4 - 12 Panels thickness (min/max) mm 8 - 100 Working width (min/max) mm 240 - 3000 Numerical Control Power Control PC22 (Windows XP) Software woodCommander Adjustable feeding speed (m/min) 10 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) E34 Pressing rollers (revolver) both for straight and shaped edges (softforming) GL sextuple Edge coils supporting unit (No. of reels) 1 Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) 25 m/min (0°-30°) Fine Trimming Unit (2 x 0,55 KW) 0°-30° Corner-rounding unit FF12 (4 motors) WD70 20 m/min Profile edge scraping unit PN20 Djdott Iudjpfx Agdoul Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership Duodpfxob Uhu As Agdol -laterally movable -with counter -Dimensions: 1300/780/H620 mm -Weight: 260 kg

Condition: excellent (used), Year of construction: 2012, Single-sided edgebanding machine for softforming, rebated door edges or any other softforming application Glue system with slot nozzle available for different glue Eva, PU, Poliolefina panel thickness range 10-60 mm 2 x milling unit for processing workpiece profiles IR lamps for material heating unit for applying anti-adhesive agent glue melter and glue application system with tank made by Meller, temperature and melting time electronically controlled Dujdpfx Agowt Uu Aodjl pressure zone: revolver with heated pads or can be replaced with rollers magazine for edge banding tape front and rear cut-off units bottom and top milling units for longitudinal band excess (2x top and 2x bottom) top and bottom polishing units PC control system for quick, easy and precise setting of the main machine functions including aggregates

Condition: used, Year of construction: 2000, functionality: fully functional, Manufacturer: HOMAG Model: KFL 10/22/QE/CF Type: Double-side Sizing & Edge Banding machine Dusdpouggpzofx Agdol Year: 2000 Status: Connected, test possible. Location Lithuania Basic machine Workpiece thickness 12...60 mm Workpiece width 70... mm Workpiece overhang to transport chain 40 mm Feed 10...40 m/min Power consumption Main drive 3...75 kW Height adjustment 0,2 kW Machine main drive Feed 6...30 m/min Power draw 2,2...6,9 kW Gluing unit Edging type: Straight and softforming edges Edging material height 16...65 mm Workpiece feed max. 60 m/min Contour, trimming unit CF/CS 10/11/12 Discharge valve HMA 1 Melting unit HMG 12-1x1-M-HO Gluing section for preformed parts Type of edge Straight edges drum profiles Edge material Belt from roll Snipping unit for profile parts WK 46 Saw blade (diameter 80 mm, cutting width 3.2 mm, drill hole 34 mm, number of teeth 20) Flush-trimming unit and scraping unit for performed parts Buffing unit for performed parts Specification, layout on request

Condition: new, Year of construction: 2025, functionality: fully functional, The Nanxing NB875A is a professional 2-in-1 edge banding solution that combines straight edge banding and Soft Forming technology in a single machine – perfect for handleless doors and modern furniture fronts. Equipped with a complete set of pre-milling, heating, pressing, and finishing units, NB875A delivers flexibility, high productivity, and premium edge quality. Its fully automated control system and intuitive software allow fast switching between 14 different profiles (full C, left/right J, concave center, concave left/right, W-shaped, diamond profiles, etc.). Key Highlights Multi-functional machine for both straight and softforming edge banding in one pass. 14 profiles available, automatically switchable via servo control. Energy-saving function – automatic standby mode after idle time. Advanced industrial control PC with 24” touchscreen, online connectivity, optional barcode reader. Fully enclosed machine with sound-absorbing material for low-noise operation. CE certified, international brand electrical components. Working Units & Equipment Pre-milling unit with 2 electro-pneumatic motors, H35 mm cutters. 2 sets of J & C profile milling units (4 motors – 7.5 kW + 3.5 kW) with automatic switching. Panel pre-heating + 2 glue application units (panel + edge). Softforming & pressing station with precision steel rollers and band pre-heating system. Servo-driven tape feed & pneumatic end trimming (Ø180×3.5×60T saws, 12,000 rpm). Rough & fine trimming units, radius scraping & flat scraping. Double buffing units for a perfect glossy finish. Independent dust extraction hoods (9 × Ø125 mm) for all processing units. Automatic lubrication system and full safety protection (panel thickness detection, feed monitoring, E-STOP). Technical Specifications Minimum panel size: 300 × 150 mm (central concave ≥ 400 mm) Panel thickness: 18 mm (straight), 18–25 mm (softforming) Edge band thickness: 0.5–0.6 mm (softforming), 0.5–1.2 mm (straight) Feed speed: 8 m/min Power supply: 380V / 50Hz Air pressure: 0.7 MPa Installed power: 68 kW Net weight: approx. 6,000 kg Machine dimensions: 11,015 × 1,000 × 1,940 mm Applications Dujdpfxexcwrmj Agdjl Production of handleless doors for kitchens, wardrobes, and bathroom furniture Complex edge banding operations in medium and large-scale production Premium edge finish with invisible glue line Advantages for Manufacturers Maximum versatility: one machine for all straight & softforming edge banding profiles. Superior finish: smooth edges, perfect glue adhesion. High efficiency: automatic operation, quick profile changeover. Cost reduction: fewer machines required, minimal downtime.

Condition: excellent (used), DOUBLE-SIDE SIZING & EDGE BANDING MACHINE - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 270 - 1200 Numerical Control /Software SINITRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) Safety and sound-proof enclosures/cabins Working line (work units support tables), manual adjustment SIZING PART (for each side): No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5.8 x 2) Free space for Milling unit FS Milling unit (vertical join trimming) ES30 + ER30 (Kw 5 x 2) 0° - 90° Softforming Milling unit SF 10 (2 x Kw 2,4) 0° - 45° Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP3/SF, SP40 (HighMelt + Edge Control EC 40) Lamps to heat the workpieces side (infrared heater) RP 10 Band Pressure zone (N.C. adjustment) Dodpfjt N Ix Rex Agdjul Pressing rollers (revolver) both for straight and shaped edges (softforming) Soft PF40 (4 positions) mm 800 (Cesoia CI10+CS10+RL10) + Edge coils supporting unit (No. of reels) 6 Rough Milling unit RS 10 (Kw 1,3 x 2) Fine Milling unit Softforming RF 10 / SF (Kw 0,65 x 2) Fine Milling unit (Multi-profile) RF 30 (Kw 0,65 x 2) Milling grooving Unit FB 30 (Kw 4,5 x 2) 0 - 90° Profile edge scraping unit (Multi-profile) RB 30 Glue scraping unit RC 05 / Soft Spraying Unit (for polishing liquid) + Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5860 rpm -Other engines with other services in stock for an additional charge Dedpfxob Uhuke Agdsul -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Condition: excellent (used), LINE of Double-Side Sizing-Milling & Edge Banding (also "SOFTFORMING") with automatic handling. Max. panel thickness 100 mm. Composed by the following machines: W05025A) Automatic LOADER (portal / gantry) "MAHROS" Mod. Brush W05025B) Double-side Sizing and Edge Bander "HOMAG" Mod. KFL 620/23/QE/30 (softforming) SIZING PART (for each side): Pre-Milling unit (2 x Kw 6,6) Free place LEFT SIDE only: 2 x Milling grooving rotating unit (2 x KW 6,6) EDGE BANDING PART (for each side): Glueing Unit (EVA glue with pre-melter) Edge coils supporting unit (No. of reels) 1 pressure zone for both STRAIGHT and SOFTFORMING Snipping (end-cutting) Unit WK14 (2 x 0,8 KW) Duodpstt Dqpofx Agdsl Fine Trimming Unit (2 x 0,55 KW) Corner-rounding unit FF12 (4 motors) WD70 Profile edge scraping unit PN20 Finish processing unit (Glue scraper + Buffing unit) FA 11 W05025C) Automatic UNLOADER-STACKER (portal / gantry) "MAHROS" Mod. Brush

Condition: used, Pressure zone turret, softforming interchangeable profiles for softforming machines, double-end tenoners, edging machines, scoring motor, chipper motor, milling motor for edging machines -HOMAG softforming interchangeable profiles for softforming profiles can be quickly converted to straight edges Dedpfx Asb Uhrmjgdsul -with heavy leadership -laterally movable -with counter -HOMAG milling unit for joint milling -with heavy dovetail guide -1x engines Perske -Motor type: -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1800/1400/H1300 mm -Weight: 712 kg

Condition: excellent (used), FULL LINE of 4 Side Sizing-Milling & Edge Banding (also SOFTFORMING), through-feed drilling and splitting of panels. Complete with fast automatic handling. Composed of the following machines: A) Loader (Bridge-Frame) "RBO (BIESSE)" Mod. Winner C (1) B) 1st Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB1 11.0 Softforming Dusdpfx Ajttgy Hjgdsl C) 1st 90° Turning device (Lengthwise to Crosswise) "RBO (BIESSE)" Mod. GPK-1 D) 2nd Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB 2 9.5 E) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (straight or Crosswise to Lengthwise) F) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) G) Multi-Borer with CN "BIESSE" Mod. Techno FDT CN (with 2 horizontal working units, 6 vertical bottom working units and 3 vertical top working units) H) 3rd 90° Turning device "RBO (BIESSE)" Mod. GPK-3 (straight or Crosswise to Lengthwise) I) Splitting Saw (Splitter) Lengthwise "GM (for BIESSE)" Mod. Split 4-84 LT L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner SC (2)

Condition: ready for operation (used), Year of construction: 2003, Brandt Edge Banding Machine Type: Profi KDF 670 Single-sided edge banding machine in right-hand configuration suitable for craftsmanship, for hot-melt adhesive application. Quick-change gluing module for processing PU glue granulate in compliance with adhesive processing regulations. Infrared hot-melt glue activation Automatic edge magazine for coil material for thick PVC/ABS Heavy-duty pressure zone Centrally adjustable top pressure Operating panel at machine infeed PC 16 electronic control Technical Data: Edge thickness: 0.4 - 8 mm Roll cut, max. 3 x 45 mm or 0.8 x 60 mm Workpiece thickness: 8 - 55 mm Feed rate: max. approx. 14 m/min Tool set R = 2 mm (exchangeable for R = 3 mm) Quickmelt gluing module Motor-driven height adjustment for top pressure - PC 16 Adjustable infeed fence Program-controlled adjustment for infeed fence Additional unit for laminate overhang Program-controlled pressure zone Release agent application for workpiece Jointing milling unit Jointing cutter set, Dia End trimming unit with chamfer/straight cut 0 - 15 degrees Pneumatic adjustment for end trimming unit, chamfer/straight Flush milling unit Pneumatic adjustment for milling unit Pneumatic two-point adjustment for vertical tracing rollers Jointing unit 0 - 25 degrees, synchronous flush milling Radius cutter set (exchangeable for chamfer cutter) Program adjustment for edge thickness Pneumatic adjustment for side tracing rollers Profile milling unit above and below - For profiling/flush trimming of end edges on post- and softforming parts and corner rounding of thick PVC edges. / Wood edges possible to a limited extent Scraper with quick-change heads Pneumatic adjustment for scraper Flat scraper glue joint Cleaning agent application for workpiece Buffing unit, 2 motors Dodex Nrtnopfx Agdeul Electrical and mechanical preparation of the edge banding machine for integration of Ligmatech workpiece return conveyors ZHR01/ZHR02/ZHR15 Weight: 3000 kg Total connected load: 15 kW Length: 5880 mm Location: ex-site customer - Immediately available - System must be dismantled by the buyer

Condition: used, Complete factory for the production of furniture cabinets, composed by: Djdpscr U Urofx Agdsul SZ0M23) Angular Panel Saw "GIBEN" Tip 17 (mm 5600x2700) with "SIRIO" automatic unloading and stacking system SZ0M25) Panel Saw “GIBEN” Mod. GammaDue (mm 3800x2200) SZ0M26) Panel Saw (Multi-saws) “GABBIANI” (finished panels mm 4250x2120) SZ0M27) Laminating Line “BARBERAN” for melamine papers (glue on paper) SZ0M29) Pressing Line “COLOMBO REMO” (mm 1400 x 9600) for paper / veneer / laminates SZ0M30) Pressing Line “FRIZ” (mm 1400 x 6200) for paper / veneer / laminates SZ0M41) 4-sides Sizing & Edge Banding Line “IMA” Combima fast handling “RBO-BIESSE” SZ0M42) 4-sides Sizing & Edge Banding Line “IMA” Combima softforming with a second double side Sizing & banding machine STEFANI and automatic handling equipment “TOMASSINI” SZ0M39-40) Edge Banding Line (single side) for narrow pieces “HOMAG” Mod. KAL 310 with Splitter "NARDELLO" Mod. Elegance SZ0M35-36) Multi-Borer “BIESSE” Techno Logic with Loader + Unloader “TOMASSINI” SZ0M45) CNC Multi Boring and Dowels Inserting Line “BIESSE” Techno FDT with fast handling “RBO-BIESSE” SZ0M37) CNC Working Center “MORBIDELLI” Mod. Author 600 KL SZ0M56) Reel Cutting and winding machine “CEFLA-DUSPOHL” Tipo RSW 2200 T SZ0M01) Wooden strips end-cutting Line "OGAM+SALVADOR" SZ0M07) Wooden strips end-cutting and stacking Line “SALVADOR+SACOT” SZ0M08) Wooden strips end-cutting and stacking Line “SALVADOR+CMA” SZ0M11-17) Preparing Line for honey-comb panels SZ0M18) No. 6 Mutli-openings (daylights) hot hydraulic presses "COLOMBO REMO" SZ0M21) Sizing and top & bottom Calibrating line for honey-comb panels "GABBIANI + CELASCHI + ELMAG + COSTA Sanding Machines" And many other machines (i.e. multi-borer "VITAP", circular saws, glue spreaders, etc.), saw-dust suction system, rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 220.01.016.22, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, rotary table diameter: 750 mm, rotational speed (max.): 12,000 rpm, The machine is being auctioned due to a business closure! Further details on the machine’s equipment can be found in the attached order confirmation. TECHNICAL DETAILS Workpiece height: 8–60 mm Rotary table edge magazine diameter: 750 mm Edge banding material (coil): 0.4–3 mm Rotary table diameter for coil edge material: 740 mm Support surface (workpiece infeed): 600 mm Spindle speed of diamond pre-milling unit: 12,000 rpm Feed speed, chain feed: 10 and 18 m/min Spindle speed, cross-cut saw unit: 12,000 rpm Upper multifunctional milling unit speed: 12,000 rpm Lower multifunctional milling unit speed: 12,000 rpm Cutter assembly: 64 mm MACHINE DETAILS Electrical data Voltage: 400.0 V Phases: 3 Frequency: 50/60 Hz Current: 28.0 A Power: 15.0 kW EQUIPMENT Ball bearing rotary table for edge banding coil material Workpiece infeed and feed fence with manual adjustment Chain feed with two speeds Edge feeding for coil and strip material in single feed Upper and lower multifunctional milling unit x-motion PLUS via smartouch Upper and lower radius scraper blade x-motion PLUS Duodpfxsxwt Nqj Agdol Corner rounding unit with motorized adjustment for postforming and softforming profiles Upper and lower polishing units Pneumatic-mechanical infeed stop for workpiece gap monitoring glueBox application unit

Condition: new, Year of construction: 2021, Exhibition machine Year of manufacture 2021 (table machine) For stationary form milling of head edges on soft and postforming workpieces. As well as for Eraser milling on thick PVC edges on rectangular workpieces and multi-sided gluing. The machining of symmetrical and asymmetrical soft- and postforming profiles is possible after manual profile depth adjustment. Motor guidance is manual by scanning on the workpiece. Basic equipment: - Workpiece stop system - pneumatic clamping cylinder - 1 milling motor 0,8 kW infinitely variable up to 27000 rpm standard with radius milling cutter R=3 equipped. The scanning is done by a starting ring on the workpiece. - Aggregate guidance on precision round guides. Technical data: Workpiece thickness: max. 55 mm Workpiece width: min. 80 mm Workpiece length: min. 110 mm Softforming profile depth: max. 50 mm Edge thickness: max. 4 mm (depending on edge material) Djdekwhapepfx Agdjul Milling tool: Radius milling cutter R 3 Electrical connection: 230V / 50Hz / 1Ph total connection: 0,8 kW pneumatic connection: 6 bar space requirement: approx. 740 x 460 x 500 mm net weight: approx. 45 kg Availability: short term Storage location: Solingen

Condition: excellent (used), Year of construction: 2019, operating hours: 4,650 h, functionality: fully functional, edge thickness (max.): 3 mm, product height (max.): 45 mm, product height (min.): 10 mm, product length (min.): 140 mm, product width (min.): 70 mm, TECHNICAL DETAILS Machine stand: tempora 45.03L, made of thick-walled electro-welded steel construction Control x-motion plus control: Swiveling 15" smartouch Unlimited storage space for user-defined edge programs Fine adjustment of the path parameters Optimization of edge overhangs when pre-cutting at the front and rear Chain feed Feed speed: 9 m/min Drive motor: 1.5 kW (S6) Precision running and guide surfaces Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm Segmented, rubberized support pads with quick-change system Rotary table edge magazine Roll edge material diameter: 740 mm Roll edge material edge thickness: 0.4 - 3 mm Pull-out frame Workpiece support: extendable up to 450 mm with roller conveyor for ergonomic working with larger workpieces Upper Pressure beam Workpiece height: 8–45 mm Pressure beam made of welded, torsion-resistant steel construction Top pressure rollers arranged in two rows Edge feed Driven rubberized feed roller Edge thickness: 0.4 - 3.0 mm Workpiece feed Extendable workpiece support: up to 450 mm Chip removal joining unit: 0 - 2 mm (on the feed ruler), digital counter Joining unit Power: 2.2 kW, diamond cutter Z2, speed: 12,000 rpm 2x1.1 kW (1.5 HP) Chip removal: max. 2 mm Workpiece height: max. 45 mm Joining cutter with diamond cutting edges Z2+2, D-80 x 49 mm (angled and tear-free workpiece edge) Glue unit Glue unit: Teflon-coated, for 1.5 kg EVA or PUR Granules Heating time: 10 minutes Linear meter output: 375 linear meters (for 19 mm board) Finely adjustable glue roller Pressure unit 1 aluminum roller at a 90° angle 1 rubberized pressure roller Scissor shears Roll edge material thickness: 0.4 - 3 mm Used for pre-cutting, swinging Cross-cut saw unit 0.15 kW, speed 12,000 rpm with 90° round shaft guide Cross-cut saw unit with 45° travel path with 0.35 kW, 12,000 rpm A choice between 0° and 10° cut is possible Milling unit Multifunctional milling unit: x-motion plus, 2 high-frequency motors, 0.75 kW each, 12,000 rpm Alternating blades: 4 each Accuracy: 2-axis adjustment enables Fine adjustment in the 1/100 mm range Motorized corner rounding unit Corner processing unit for post and softforming profiles Workpiece height: 10 - 45 mm Edge thickness: 0.4 - 3 mm HW milling cutter with 2 cutting edges Radius: max. 6 mm Workpiece length: min. 270 mm (at 19 mm height) Dsdpfxewwq Dzs Agdsul Radius scraper unit Processing of 2 mm plastic edges Adjustment of the scraper via digital counter and m-motion positioning system Scanning of the workpiece contours Polishing unit Upper and lower polishing unit Spray device for cleaning agent Surface scraper Upper and lower surface scraper for any adhesive residue. Scanning of the workpiece contours Multifunctional milling unit for cup hinge drilling for processing workpieces with cup hinge drilling, rear wall grooves and acute-angled workpieces

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Duodpfovi H Diex Agdel Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: excellent (used), Year of construction: 2007, I sell the middle cut throughfeed saw HOMAG FPL620/06/15/P S/LQ. Year 2007. Working width 204 - 1304mm Working thickness 12 - 60mm Cutting width 100mm Free end width 300mm Feeding speed 10 - 40 m/min. Configuration: 1 + 1 Stk. cutting aggregates top + bottom 1 Stk. cutting aggregate flexible top/bottom 1 Stk. cutting aggregate flexible top/bottom Dusdpfjkbx Easx Agdel 1 Stk. grooving aggregate with jump for softforming function Material pressure feeding band from top Throughfeed machine. Very good condition. Available immediately.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 0/200/06/3164, overall weight: 6,500 kg, total length: 12,600 mm, workpiece weight (max.): 5,500 kg, Softforming edge banding machine , in operation, used condition, year of manufacture 2003, Dsdpfovx Ep Nsx Agdoul