Used Soft Jaws for sale (6,581)

Condition: new, Material number 16 Cr Mn 5 Djdpfx Ahob Rmx Hj Ujcp Width of the centring groove 32 mm Length 90 mm Width 60 mm Height 54 mm

Condition: ready for operation (used), soft cheeks Make SMW Autolok Type 0137643 Djdpfx Asftzz Seh Uscp Weight 9 kg per piece

Condition: as good as new (ex-display), soft cheeks Make SMW Autolok Dcodpfxeftzzys Ah Uop Type 13/643 martial 15 cr NI 6 Weight per piece 9 kg

Condition: excellent (used), soft top jaws Make Schunk type SFA 400 (28320) length 180 mm width 50 mm height 73 mm Groove width 18 mm Dcodpfx Ahjivzb Re Uep Bar width. 30 mm

Year of construction: 1988, condition: good (used), Bucket sealer Dcsdjigyp Hjpfx Ah Uep Make: Soft Electronic Systems Type: Semi-automatic bucket sealer Model: PMS 2 GH Capacity: Up to 300 buckets per hour Frame: Stainless steel Range: Buckets up to D = 300mm Dimensions: L x B x H = 1.000 x 900 x 1.000 mm Weight: 150 Kg Power supply: 380 Volt – 50 Hz – 1,5 kW Comp. Air: > 5.5 Bar Features: manually positioning of bucket automatic seal process (adjustable time) automatic sliding towards cutting device automatic pushing and rotating knife manually reeling up the film manually removing of bucket

Year of construction: 2022, condition: like new (used), Iceteam 1927 Model 603 S&S Soft and Shake is the floor standing machine for soft gelato, soft ice cream, shake and frozen yogurt. High productivity - hourly production soft - 30kg, hourly production shake - 30kg Flavours - 2 Power 400v - 3 phase - 50hz Bag-in-Box option Mixer in tank option Peristaltic pump C1M: certified procedure to clean the machine without disassembling most of the parts Dcedpfewx Ni Sex Ah Uop Dialog: remote assistance and monitoring system Only used for two months

Condition: excellent (used), axle configuration: 2 axles, first registration: 11/2010, wheelbase: 810 mm, Year of construction: 2010, screen/69WGLZ = Further information = Axle configuration Rear axle 1: Max. axle load: 925 kg Rear axle 2: Max. axle load: 925 kg Dimensions Dimensions (L x W): 505 x 229 cm Weights Unladen weight: 1,150 kg Payload: 700 kg GVW: 1,850 kg Condition Technical condition: very good Visual condition: very good Financial information VAT/Marginal taxation: VAT deductible Identification License plate number: 69-WG-LZ Further information Contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. Dcsdsvupp Sopfx Ah Usp When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: 8 sets of soft top jaws for key bar chucks, helical toothed Dedpew U Abrsfx Ah Uscp -Jaw width: 32 mm -Dimensions: see photo technical drawing -Transport dimensions: 470/310/H90 mm -Total weight: 47 kg

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Dcsdpfx Aovvi Iqjh Uop

Condition: ready for operation (used), For sale: Rheon 2010, Rheon VX122, Dsdpexrx T Refx Ah Uecp

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Dodjxf Uxcopfx Ah Uocp

Year of construction: 2015, condition: like new (used), Screw-on jaws Dcsdsfmdgcepfx Ah Uep Claw jaws Type SZKA 312 Weight 3,2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 32 mm -Number: 2 sets of top jaws available -Price: per set -Dimensions total: 90/95/H55 mm Dedpfx Ahoww Ec Eo Uocp -Total weight: 2.1 kg/set

Condition: as good as new (ex-display), Top jaws Make SMW Autolok Type 080 954 WAKS 500 10 Dcsdpfeftz Adsx Ah Usp 16 Mn Cr.5 Weight per piece 4,6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Dodpfxjq Ei Ekj Ah Uocp -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 2 sets of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H54 mm Total weight: 1.1 kg/set

Condition: excellent (used), Pull down jaws (28370) Make Hilma type BZT 160 3722-04 Dcsdpfxjlrp N Hj Ah Uep well suited for bright drawn material weight 3,5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm Dcjdpforh Nh Sjx Ah Uop -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm -Total weight: 2.4 kg/set

Condition: excellent (used), 1 set of spiral base jaws (28539) Dimensions, see photo Dcodpfx Ahoud Sk Eo Uep

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 92/66/H56 m Dcjdpfx Ahjrhmnps Uop -Total weight: 1.6 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm Dsdpfexdm D Isx Ah Uocp -Total weight: 3.2 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 110/79/H66 mm Dsdoxdiz Nspfx Ah Uscp -Total weight: 2.9 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 26 mm Dcodpeq Tvqvofx Ah Uop -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Dimensions total: 78/78/H75 mm -Total weight: 2.5 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing Dcodpet Hmkgefx Ah Usp -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H54 mm / 69/60/H54 -Total weight: 1.1 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Dcsdpfxoxdivto Ah Uep -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 21 mm -Dimensions: see photo technical drawing -Dimensions total: 78/63/H56 mm -Total weight: 1.3 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: jaw set for three-jaw lathe chuck -Jaw width: 24 mm -Dimensions: see photo technical drawing Djdpfx Ahoxdiu Ao Uecp -Dimensions total: 90/72/H67 mm -Total weight: 2.2 kg