Soft top jaws (28320)

Schunk

Condition: used, diameter 315 mm boring diameter / mm - / Gtjdsythnbjpfx Ahysw SCHUNK wedge bar chuck ROTA-S-plus 315-92 DIN 55028-C8 incl. chuck key Condition: Very good Diameter: Ø 315 mm

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 m weight of the machine ca. 200 kg dimensions of the machine ca. 1,9 x 0,81 x 0,86 m For collecting and disposing of bulk goods and industrial waste - Tipping container - forklift attachments for in-house storage of Bulk solids - powder-coated in standard color: RAL 5010 blue, RAL 6011 green or RAL 7016 anthracite gray / special paint on request - Tilting device with base plates for swivel and fixed castors Gsdpfxogvqz Ij Ahyjtw - Drainage device - Stable base frame with drive-in pockets - Favorable load center - Robust sheet steel construction with reinforced edges Container volume: approx. 600 l

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, We are selling 11 hydraulic Schunk power clamps, type KSH 250. Although the clamps are from 2002, they are virtually as new. They still have the original protective coating and have always been stored dry in a warehouse. All 11 units are unused. Sufficient clamping inserts are included for a clamping range of Ø34 to Ø62. Of course, inserts can be tailored to meet your specific requirements. Gsdpeyt I Dcjfx Ahyotw

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate - External exhaust hose ULT - Table lift cylinder (?) Godpjxwvrujfx Ahystw According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm Gtedpfew Dvipsx Ahyow thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Gtsdpfx Ahoyn Dfleyew 27 units Partially equipped with machining tools such as milling cutters or drills. MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 400 x 200 x 200 mm Machine weight: 10 kg External Reference: Lot 3/ Lotec

Condition: not inspected (used), Year of construction: 2018, functionality: unexamined, machine/vehicle number: 0129053.001, overall weight: 200 kg, plate height: 100 mm, plate length: 430 mm, plate width: 330 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Plate dimensions: 430 x 330 x 100 mm MACHINE DETAILS Operating voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 520 x 300 x 380 mm Weight: 200 kg Gtjdjym T D Iepfx Ahyjw EQUIPMENT Electric control External reference: Lot 237/ Lotec

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2042.6958-01, quill diameter: 160 mm, overall weight: 8,000 kg, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, distance between centers: 3,000 mm, VDF lathe type 800 DUS in very good condition. Specifications: Heidenhain Manual Plus 620 control Speed 6-1600 rpm (2 steps) Swing over bed 800 mm Spindle bore 128 mm Distance between centers 3000 mm Spindle mounting DIN 55027 No. 11 Year of manufacture 2017 Dimensions 6,320 mm (including chip conveyor + 1,200 mm) 2,930 x 2,440 mm Weight 8,000 kg Gtsdpfsx S Nv Ssx Ahyew Accessories: Heidenhain Manual Plus 620 control Steady rest 250-500 mm 4-jaw chuck 700 mm 4-jaw chuck 450 mm 3-jaw chuck 315 mm Parrat tool holder with 4 holders

Condition: used, Description For sale is a set of SCHUNK pneumatic 2-jaw power clamping blocks (centrically clamping) including manual/control valve (as shown) and an extensive set of top/clamping jaws (various designs, incl. prism/V-jaws). Ideal for fixture construction, series production, and flexible setups. Gtjdpoyp Iflsfx Ahyew 2 units available Price quoted: net/unit Collection in 57439 Attendorn. Shipping possible.

Condition: used, 3-jaw wedge bar chuck, presumably RÖHM or SCHUNK Equivalent to Forkardt F315 or SMW Godpsw Dvv Nofx Ahystw Diameter: 318 mm Inner diameter: 85 mm Chuck flange: short taper DIN 55022 size 8 1 set of chuck jaws consisting of base jaws and hard stepped top jaws 2 sets of chuck jaws consisting of base jaws for mounting top jaws Weight: 100 kg Good condition

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation Gsdpfxsu Rqynj Ahyjtw

Condition: used, diameter 315 mm Control / Gjdpfx Ahepp Dwdjyjtw weight of the machine ca. / kg

Condition: ready for operation (used), Year of construction: 2021, Two like-new and originally packaged small parts grippers Schunk for cobots (collaborative robots) are available. Payload: 1150g, number of fingers: 2, stroke: 20mm, max. gripping force: 230N. Machine dimensions X/Y/Z: approx. 161.2mm/125.5mm/86.4mm, weight: approx. 1380g. Documentation available. An on-site inspection is possible. Gtsdpeym Dfvjfx Ahyew

Condition: used, Year of construction: 2006, Technical details: turning diameter: 490 mm turning length: 2000 mm total power requirement: 15/20 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 2,8 x1,85 x 1,9 m In like new condition Heidenhain cycle control Torsion-resistant bed, made of high-quality cast iron with hardened, precision-ground guideways and a glass scale on the X-axis Safety clutch on the Z and X axes Sealing air with carbon filter in direct position measuring system High accuracy and rigidity of the lathe spindle thanks to precision spindle bearings, spindle bore Ø 93 mm standard, optional Ø up to 130 mm Gtedpfx Ahswmcx Asyjw Solid tailstock, quill Ø 90 mm with internal taper MK5 Large overhang above the facing slide for easy accessibility during shaft machining. The machine has Teach-in CNC Programms. Control: MC420. Tool holder: SAUTER. *

Condition: like new (used), functionality: fully functional, total length: 123 mm, clamping range: 40 mm, 2 x Schunk DSF FH40 for Reishauer grinding machine RZ150 / RZ160 Workholding devices, as-new condition, used Low-profile chuck / base chuck / hydraulic expanding mandrel Clamping diameter: 40.00 mm Gtsdpfxswzkhne Ahyjw Active clamping length: 40 mm Total length: 123 mm Balanced for n max. = 3,000 rpm Base chuck with stroke monitoring and through-hole for air system monitoring / hydraulic auxiliary function from our inventory Price / details on request. All technical data subject to typographical errors/mistakes. We exclusively sell to countries of the European Community.