diameter: 1100 mm
weight: 650 + 490 kg
clamping plate 1:
Ø 1100 mm x thickness 162 mm ( on straight side Ø 960 mm x 90 mm)
center drill Ø 50 mm with blanking plug
clamping plate 2:
Ø 1100 mm x 70 mm, incl. clamping - drill with thread M12 more
rising about 70 pieces of 0,5-8,0 mm, 1/10 mm
Total length approx. 59 mm
Head diameter approx. 19.2 mm
Head height approx. 9 mm
Length approx 46 mm
Shank diameter 12.5 mm
Thread about 12.4 x 1.3 mm (measured)
Lenght approx. 14 mm
Collet sizes are 3 x slotted more
Year of production: 2001
Manufacturer: TOS Hulín
Type: SKJ 20A
modernization carried out in 2007
siemens 840D system
board diameter - 2000mm
max. turning diameter - 2300mm
max. board load - 15,000 kg
CAPTO C6 tool clamping system
right slide - 8 tools
left slide - 4 tools
electric motor power - 50kW
machine weight approx. 35,000 kg more
swing diameter:450 mm
weight of the machine ca.:0,35 t
dimensions of the machine ca.:0,8 x 0,3 x 1,3 m
swing diameter:180- 450 mm
Height of centres:500 / 700 mm
bed width:320 / 380 mm
3 roll steady rest
retrofitted and unused
steady for heavy lathes more
Clamping flange according to DIN 55027, e.g. for Röhm 315
Execution in steel; Cone size: KK8
Spindle hole circle: approx. 135 mm
Flange outside diameter: 317 mm
Mounting bolt circle for 3x120 ° ZK screws M12
Raw chuck approx. 287mm
cyl. Centering diameter ø 260 mm x 4 mm
Flange width: 32 mm more
Tool holder with polygon shank ( Capto 5 )
many unused HM plates
Size according to the enclosed pictures !
One of the pictures shows a tool in its formerly installed state !
5 pieces of hard base with screwed-on aluminum jaws,
suitable for a FORKARDT chuck, 250 mm Ø
1 set of inwardly stepped jaws: 190 - 250 mm
1 set of inwardly stepped jaws: 120 - 200 mm
1 set of jaws stepped outwards: 220 mm
1 set of jaws stepped outwards: 100 - 250 mm
1 set of jaws stepped outwards: 120 - 300 mm
1 set of outwardly stepped jaws made of St: 120 - 260 mm
1 set of outwardly stepped jaws made of St: 140 - 240 mm more
we sale used but proofed Jaws for differently Chucks
tested used good base jaws or top jaws
for three-jaw hand chucks or power chucks.
► FORKARDT, RÖHM SCHUNK SMW
► Base jaws inclined or straight toothing
for ø 400; 315; 250; 200 mm
► Top jaws, reversible special jaws (on request)
for three-jaw power chucks, for example pointed teeth
► MOUNTAIN FORKARDT, KITAGAWA, etc.
► serration, base jaws
for ø 400 315, 250, 200 mm
Pictures are examples:
Image: 1... more
diameter: 250 mm
passage: Ø 80,0 mm
width: 80 mm
weight of the machine approx.: 18,0 kg
dimensions: Ø 250 x B: 112 mm
three jaw chuck made of steel
flange intake Ø 210mm with 3 pcs drill hole M12x44
inkl. 3 Satz 3 Backen more
Three-jaw manual chuck with push button adjustment or without with direct mounting flange DIN 55027 F315 J6
or DIN 55027 J8 incl. 4 x fastening screws
No. 1628855 ø 250 mm KK8 with jaws
No. 1644549 with push button and jaws, NEW
We can offer top jaws or soft top jaws
All feed was dismantled, cleaned, checked.
diameter: 310 mm
passage: Ø 98 mm
width: 110 mm
weight of the machine approx.: 47 kg
dimensions L x W x H: Ø 310 x B: 230 mm
4 jaw chuck made of steel
- pitch circle diameter Ø 133mm , with 4 bolts M12x50, flange size Ø 310 x 19mm, passage Ø 104mm
- clamping jaws - clamping area internal min. approx. Ø 5 and external max. approx. Ø 380mm, jaws ajustable idividual
in a top used condition more
Shaft diameter approx. 11.8 mm
Groove approx. 2,5 mm
Thread length approx. 12 mm
4 pieces internal collets
from diameter 11 mm - 23 mm, 4 mm increasing
from diameter 12 mm - 24 mm, 4 mm increasing
from diameter 13 mm - 25 mm, 4 mm increasing
from diameter 14 mm - 26 mm, 4 mm increasing
8 pieces external collets
from diameter 10 mm - 45 mm, 5 mm increasing
from diameter 10,5 mm - 45,5 mm, 5 mm increasing
from diameter 11 mm - 46 mm, 5 mm increasing (2 pieces in total)
Digital display Litton DZ-CAC-W 27-06-006
Delivery time: immediately
Year of construction: approx. 1992
L x W x H: approx. 300 x 300 x 200 mm
Weight: approx. 8 kg
Good general condition
Technical data - digital display
suitable among others to: Hamlet Commodor 230
Display device: LITTON DZ - CAC - W
Number of axes: 3-axis
Options: 1 limit switch-off point with output
incl. 3 glass rulers (Heidenhein LS 303)
Measuring lengths: 140; ... more
diameter: 250 mm
passage: Ø 80 mm
width: 106 ohne Flansch mm
weight of the machine approx.: auf Anfrage kg
dimensions: Ø 250 x B: 140 mm
three jaw chuck made of steel
incl. chuck key
inkl. 2x 3-Backen
flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm
on Sale with or without flange!
- Diameter 500 mm
- permitted up to speed 1900 rpm
- with additional 2 sets of base jaws with top jaws
suitable for :
spindle head, DIN 55029, size 11, passage approx. 190 mm, 6 drivers
The Machineseeker Trust Seal gives buyers the ability to detect at a glance whether they are dealing with a trusted seller or not .
What do we verify?
Check of trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of accessibility to main phone number.
Credit report may not contain negative criteria.
Buyer complaints can lead to withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no entitlement to the grant of the Machineseeker Trust Seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.