Used accessories and spare parts for lathes for sale (275)

Condition: used, Year of construction: 1975, Accessories / Spare parts for an engine lathe Lhjdpoctgb Tjfx Akqef Manufacturer: TADU, Origin Spain Model: F 650 Year of manufacture: approx. 1975 • Main spindle ASA Mounting A 1-8", spindle bore 60 mm Price: €1,495.00 • Drive unit (PIV gearbox) for the headstock with stepless adjustment Manufacturer: P.I.V., Bad Homburg, Origin Germany Model: MAS 3 On the TADU F 650, an additional intermediate gear has been installed. This enables a speed range of 8 - 42 and 40 - 200 rpm. Drive motor power 5.5 kW Price: €4,650.00 plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Support milling motor RUWO Weitmann Lhjdpfx Aettk U Ejkqef Mod.SFE 20/G3 4 milling spindle speeds Motor 380 Volt 2800/1400 n1/min. 0,55 / 0,44 kw Accessories : 5 collets : 5-6-10-12-16 mm Transport dimension : L.500 mm W.250 mm H.350 mm Weight 48 kg

Condition: excellent (used), Steadies for lathe VDF BOEHRINGER Type: V 800 1. Fixed steady 1. Travelling steady Ljdpoyfny Usfx Akqohf In very good condition.

Year of construction: 2000, condition: as good as new (ex-display), The following spare parts from MORI SEIKI VL250 Bj.2000 1.turret(not complete) Ball screw with nut X and Z axis X and Z axis guides parts are from new machine Lhedpfxocbinns Akqsf Motor X-axis See photos.

Year of construction: 1990, condition: used, 2.tool turret heads make DUPLOMATIC year 90 Type:BSV-N250 8/20-110/50 Tool holder size VDI50 Tool stations 8 pockets. Center height: 125mm. Price per 1 piece. Ledpfobaf Spex Akqehf

Year of construction: 1995, condition: used, 2X Available main spindle controller SIEMENS SIMODIVE Lsdpsdi Hihefx Akqjhf Type:D380-D430/120A. Price per 1.piece

Year of construction: 1992, condition: used, 2.Werkzeugrevolver Fabr.SAUTER type: 0.5.480.525 Lsdpfedg Tixex Akqshf with 8 positions VDI 50 shots with control unit EK 400 Are of vertical lathes.

Year of construction: 1989, condition: good (used), Complete Fanuc CNC control 1989 Type : 0-Mate T. Ljdpfx Ash Iz Dijkqohf In the cabinet .

Year of construction: 2000, condition: good (used), Set of soft and hard jaws for 3-jaw power chuck RÖHM 630 mm. Lhedpfxswd Tl Is Akqsf

Year of construction: 1994, condition: good (used), Spare parts for MONFORTS CNC lathes KNC 5 /1250 (Electronics of KNC 4 -KNC8 identical) 1.handwheels price. 1500,-€ 1.all axis motors price 2000,-€ 1.plan support price 1800,-€ Lsdpfx Akjd Nmnweqjhf 1.tailstock price 1800,-€ 1.ball screw with nut Z-axis 750,-€ 1.cover ball screw Z-axis 250,-€ 1.chip conveyor for turning length 1250mm with coolant pump price 2 800,-€ 1.main headstock price 1800,-€

Year of construction: 2000, condition: good (used), Contributed tool holder VDI 60 / ATC For large CNC lathes RAVENSBURG / HEYLIGENSTAEDT / WOHLENBERG etc. WOHLENBERG etc. Ljdjh Iz Duepfx Akqohf 2.piece . SAUTER 0.5.921.106072.813 No. 1 and 2 with ATC 1.piece . SAUTER 0.5.921.106072.814 No.3 with ATC 1.piece . WENDEL 214.060/A3820 No.4 with ATC 2.piece . MULTIFLEX 252.71.566 No.5 and 6 Without ATC In good condition.

Year of construction: 1996, condition: ready for operation (used), We have spare parts for CNC lathe VDF Boehringer cm180. Following parts. Ljdjgqurbjpfx Akqohf Turret head price:1500,-€ Tailstock price:1000,-€ Main headstock price:3000,-€ ball screw X and Z axis price:1000,-€ axis motors X and Z price:3000,-€ Main spindle motor price:3250,-€ Hydraulic system price:1200,-€ Chuck 250mm with clamping system Price:1800,-€

Year of construction: 1996, condition: ready for operation (used), We have in stock a large inventory of used axle motors, mounts, etc.. Lhedpfxjgtmwtj Akqjf Please ask for demand. From older and as good as new CNC turning and milling machines INDRAMAT / SIEMENS / FANUC /

Condition: used, Year of construction: 2000, Spare parts for the HITACHI SEIKI CNC lathe, type HT 23 RIII, built in 2000. 1. Headstock with chuck. 1. X and Z axis motors. Lhjdewf Aftepfx Akqjf 1. Control panel with monitor. 1. X-Z axis controller. 1. VDI 40 tool turret with 12 positions.

Year of construction: 1996, condition: ready for operation (used), CNC control FANUC FANUC 15TF Complete control with axis controllers X and Z for CNC lathe. Lhjdpegqucpsfx Akqef

Year of construction: 2010, condition: like new (used), We have the following accessories for Weiler E30 lathe. 1.piece .faceplate Schunk 250mm price:600,-€ Ljdpogabvnsfx Akqehf Spindle head DIN 55027 size 5 2.pieces.faceplate Röhm 260mm price each 1.piece:650,-€ spindle head DIN 55027 size 5 1.piece.travelling steady rest Price: 450,-€ 2.pieces.driving flange Price per. 1 piece: 210,-€ Spindle head DIN 55027 size 5 All parts are in very good condition.

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Manufacturer: SCHUNK Type: ROTA NCO260 year 2010 diameter 260 mm with intermediate flange diameter 220 mm spindle nose in flange DIN 55028 / A6 Thread in tie rod M24 N max: 4500 rpm Lhsdpfx Akoikzy Dsqjf In good condition. 2.pieces available Price is for 1.piece.

Year of construction: 1996, condition: ready for operation (used), Main spindle motor make INDRAMAT Type:2AD160C-B35LA1-BS03-A2V2 Bj.1996 Everything else see type plate From CNC lathe. Lhedpfx Akegtmuujqsf (We also have the matching motor controller from INDRAMAT)

Year of construction: 2005, condition: good (used), 7th piece-driven tool holder Suitable for CNC lathe TRAUB TNA 480 tool holder size VDI 40. Lhjdjhwnfkopfx Akqjf Also fits SAUTER tool turrets with VDI 40 holder. 7th piece Horizontal No.3/4/5/6/7/8/9/ for drilling and milling Price per piece 550,-€ 2nd piece Horizontal No.1 and No.2 for tapping Price per piece 600,-€ 1.NC - Drill chuck VDI 40 clamping range 1-13mm Price 100,-€ 1.NC - Drill chuck VDI 40 clamping range 2,5-16mm Price 150,-€

Year of construction: 1998, condition: used, bar max. 75 bar piston stroke 0 mm revolutions per minute 0 U/min 2 pcs. available. Price is for 1 pc. Ljdpeu Sbcvjfx Akqehf

Condition: used, turret of a Boehringer lathe Lhsdpfx Akon Sulmjqef

Condition: used, Technical details: weight of the machine approx.: 5000 kg transport dimensions LxWxH: 1,4 x 1,8 x 2,2 m VERTICAL MULTIFUNCTIONAL HEADSTOCK UNIT FOR VLC 800 MT TURNING MILLING (see last photo for comparison) The headstock unit of the EMAG machines of the VLC series is characterised by short strokes, high rapid traverse rates, extreme rigidity and an integrated cooling system. Maintenance-free, frequency-controlled three-phase motors serve as feed drives for the X and Z axes. Max. chuck speed = 800 rpm. Motor: MBS382F Feed drive: 500 stroke (Z-axis) Stroke limitation 500mm Hydraulic cylinder Weight compensation Lhodpeu Nlhkofx Akqjf Spindle flange according to DIN 55 026 size Z 380 *

Condition: excellent (used), Tailstock MK 5 Center height 355 mm Clamping surface . width 310 mm length 450 mm Quill stroke 160 mm Quill stroke diameter 90 mm Transport dimension: L.700 mm Lodpfx Aketrnhfeqehf W.310 mm H.480 mm Weight 170 kg

Condition: used, weight / kg Lhedpjxwdyaefx Akqsf taper MK /

Year of construction: 1999, condition: used, ja VDI 20 number 3 Stück im Paket +++++ Lhsdjhr Sv Tepfx Akqef Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++