Used Chuck Jaws for sale (5,423)

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 18049, Controller: Siemens 840 x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Table: 400 x 400 mm Spindle speed 10.000 rpm Rapid traverse 30 m/min Number of pallets 8 Change time of pallets 8 sec Bsdpfxewn Exze Anpjww Power capacity 35 /24 kW Total power requirement 65 kW Tool changer SK 40 Machine weight: 13.000 kg Machine dimensions: 4730 x 3252 x 2650 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: SEOM CAS50, overall weight: 800 kg, chuck outer diameter: 1,250 mm, three-jaw chuck diameter: 1,250 mm, bolt circle diameter: 463 mm, total height: 180 mm, outer diameter: 1,250 mm, cone mount: 520 mm, cone diameter: 520 mm, spindle bore: 520 mm, rotational speed (max.): 500 rpm, Seoam CAS50 Chuck, like new with less than 500 hours of usage. See images (with rust preventative applied). Bedpfx Asz Erq Tonpeww

Condition: used, functionality: fully functional, Röhm Spannstock SSP 315/3 - ID No. 161508 - Pneumatically actuated stationary clamping block - 3-jaw power chuck - Operating pressure: 6 bar - Clamping force: 111 kN - Outer diameter: 415 mm Bjdpfxjyuwh Ts Anpeww

Condition: like new (used), functionality: fully functional, total height: 125 mm, outer diameter: 610 mm, hole spacing: 180 mm, Samchully 3-Jaw Chuck / HC-24 Bwodpfjxzcq Esx Anpjw 1x Standard Flange 3 x Soft Jaws 3 x Hard Jaws 1 x Wrench 1 x Grease Gun Specifications: Jaw Stroke Diameter: 16 Piston Stroke: 35 Max. Clamping Diameter: 610 Min. Clamping Diameter: 152 Permissible Maximum Input Force: 82 (8362) Maximum Static Clamping Force: 273 (27838) Max. Speed (rpm): 1760 Weight: 223 Moment of Inertia: 12.2 Max. Hydraulic Pressure: 3.2 (32.6) Hydraulic Cylinder (operation): Y-2035R(RE) Working Hard Jaw: HB18B2 KITAGAWA model: N-24

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Bedpezty Rgsfx Anpoww Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Bore 270 mm Bwsdpeubbx Hjfx Anpow Jaws are individually adjustable with many soft jaws in good condition.

Condition: excellent (used), Three-jaw chuck, SMW power chuck, 250BB ----- Condition of the item: Good condition. Internal number: PS3 Bedezlt Ezopfx Anpsww

Condition: used, HWR InoFlex VL 160 - 4-Jaw Manual Chuck 4-Jaw Manual Chuck, weight-optimized with centrifugal force compensation Type / Model: HWR InoFlex VL160 Condition: Used Technical Data: Base chuck: VL100 Diameter: 1600 mm Stroke per jaw: 11.3 mm Compensation stroke per jaw: 9.3 mm Max. spindle clamping torque: 320 Nm Max. clamping force: 180 kN Max. speed*: 480 1/min Mass of extension set: 300 kg Moment of inertia: 129 kg·m² Max. workpiece weight: 600 kg Standard T-slot: GP13 * Balancing quality according to DIN ISO 1940-1: G 6.3 (unlubricated) For larger workpiece weights, support on the chuck body is required. Equipment: - Includes 8 sets of jaws Bwsdpfozulacox Anpew Inquiry item: Transport costs in a customized offer.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, 600 mm lathe chuck for sale, used only once. Hydraulic 4-jaw. Bodpszgc Uzsfx Anpoww

Condition: good (used), 4 – Chuck Jaws Stock number: Manufacturer: Röhm Origin: from VDF machine Diameter: 315 mm Bwsdpfxj Agl U Eo Anpew Mounting: 4 bolts Pitch circle diameter of the screw connection: 135 mm Through hole: 105 mm Height without screws: 180 mm Height with screws: 240 mm Accessories: Rotating chuck jaws, for centric clamping Weight: 67.5 kg

Condition: good (used), FORKARDT Three-jaw manual chuck with wedge bar system Type: F315 No.: 1403959 with flange for KELLENBERGER cylindrical grinding machines Equipment: Bwedpfx Anjzi Aqzopsw 1 set basic jaws 1 set hardened jaws 1 piece flange D: 300 mm ISO 50, M24 1 set operating wrench 1 piece operating manual Condition: good, fully functional

Condition: excellent (used), Item description: Bwedjzltzvspfx Anpew Three-jaw chuck SMW power chuck HFK-N-260-72 ----- Condition of item: Good condition. Internal number: PS5

Condition: ready for operation (used), Outer diameter: 200 mm Bore diameter: 54 mm Weight: 13.7 kg Bwjdpfx Anszb Igmspsw

Condition: like new (used), including additional supports Bsdpfx Aoz E H Hvjnpoww

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, Diameter: 450 mm and Hydraulic clamping cylinder Type: Y-1550 RE. Bedj Afvaxjpfx Anpjww Sold individually or as a set!

Condition: new, Röhm 20641, KFM 130/2, Power chuck 130 MO KFM 2-jaw, ZA110 Total diameter: 130 mm PF003850 Bjdeivdq Ropfx Anpsww Number of jaws: 2 Jaw stroke: 5.5 Internal diameter: 46 mm Width: 63 mm Manufacturer’s specifications for technical data: Max. clamping force: 5 kN Max. total clamping force: 11 kN Max. speed: 3950 rpm Original new price approximately €4500 You can find more power chucks – new and used – in our shop! International shipping costs available upon request! Buy power chucks and other products at affordable prices – here you buy products from a professional for professionals – you will find more attractive offers in our SHOP.

Condition: good (used), Year of construction: 2015, Manual collet chuck Fabr.Ortlieb Type: SSF60/8 Year 2015 Bedpfx Asucw Hpsnpsww Max. throughput : 60 mm Spindle speed Max : 3000 rpm Spindle holder DIN 8 In good condition without collets .

Condition: excellent (used), - Record Scorpion Flow Wrapper Bwodpfxoyrfvts Anpsw Model: Scorpion E HS Year: 2007 (full overhaul in 2024)

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Bodey Apncjpfx Anpsww Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: ready for operation (used), Diameter: 200 mm Bore: 55 mm Overall height: 119 mm Bsdpfx Ansxb A N Iepeww Weight: 23 kg

Condition: excellent (used), outer diameter: 400 mm, Used hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. The set includes the parts shown on the attached photos: chuck, clamps, screws, and hard jaws Bwedpfx Aez Rlx Nonpjw

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, As-new base jaws Manufacturer: SCHUNK Type: SFG400 (helical gearing) Condition: "NEW" with M16 x 1.5mm screws Technical data: Bwsdpfxjz Tc Rns Anpsw Width B: 45mm Length L: 160mm Height H: 57mm Cross slot N: 30mm Web S: 18mm Hole spacing L: 60mm Price plus shipping; Weight approx. 7.5 kg/set ----- International customers please inquire about shipping costs ----- Further base and top jaws can be found in our online shop: ----; WK-Sales.de

Condition: ready for operation (used), Diameter: 160 mm Bwedeyv Dvuopfx Anpew

Condition: new, Three-jaw chuck for DMG MORI NLX 2500 – A8 taper according to DIN/ISO 702-1 Power chuck with adapter ring and threaded ring for NLX 2500 High-quality three-jaw chuck for the DMG MORI NLX 2500, designed for precise and reliable workpiece clamping in demanding turning operations. The clamping system includes a matching adapter ring with an A8 taper according to DIN/ISO 702-1, as well as a threaded ring that fits the drawtube of the NLX 2500. Scope of delivery Three-jaw power chuck Bodpfx Aoz Ipmwonpoww Adapter ring with A8 taper according to DIN/ISO 702-1 Threaded ring to fit the NLX drawtube Design adapted to the machine interface Precise clamping technology from Geiger + Haag Geiger + Haag develops and manufactures power chucks and custom clamping devices for demanding machining tasks. Since its foundation in 1947, precision, reliable clamping technology, and application-specific solutions have been the focus. Through the close connection between design, manufacturing, and customer support, even individual clamping tasks can be implemented quickly and in a practical manner. Our clamping solutions are used, among other applications, in multi-spindle lathes, rotary transfer machines, special machines, and transfer lines. Your individual clamping solution Do you need a chuck for a specific machine, a special taper, or a custom drawtube connection? We develop and manufacture the right solution – tailored to the machine, workpiece, and machining process. Geiger + Haag – Clamping technology for demanding machining tasks.

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Bedpfx Anezz Amtopoww