Used Lathe Chuck Jaws for sale (8,214)

Condition: used, 1 set of soft top jaws, chuck jaws RÖHM Type: Duro 160/3 Suitable for 3-jaw wedge bar chucks Chuck diameter: 160 / 180 mm Jaw length: 84 mm Jaw width: 39 mm Height without step: 95 mm Height with step: 99 mm Fpsdsxpqz Uspfx Agrob Slot width: 8 mm Step width: 18 mm Hole spacing: 32 mm Holes: Ø 9 mm (for M8 bolts) - 1 set of steel top jaws - used, machined jaw set Base jaw dimensions L x W x H: approx. 84 x 39 x 99 mm Weight: approx. kg Multiple sets of top jaws available under stock number 62056 Top jaws compatible with RÖHM, FORKARDT, SCHUNK, or SMW

Condition: used, Faceplate made of cast steel, probably PUT (Poland), with 4 individually adjustable clamping jaws. Type PUUf-M400C6ZJ, No: 3033. Diameter: 400 mm. Inner diameter: 100 mm. Mounting: short taper DIN 55022 size 6 with 4 M12 mounting bolts. Taper mounting: Ø approx. 106 mm. - 1 set of reversible stepped jaws for turning and drilling. Weight: 56 kg. In good condition. Fpodpfx Aoxf Uxcjgrob

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Fedpfeu Axzkex Agrspb Good condition

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm Fpedown D Twspfx Agrsb -Weight: 9.8 kg

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, SFG, 400 as-new base jaws "helical geared" for SCHUNK, FORKARDT three-jaw chucks, approx. 500 mm size. Other base or clamping jaws available on request. Photo No.: 404-400. Supplied with M16 x 1.5 mm screws. Manufacturer: SCHUNK. Condition: NEW. The listed price is net. Gross price: €416.50 plus shipping. Weight approx. 7.5 kg/set. Additional jaws available on request. Fpodsxx U Nhopfx Agrob Shipping within Germany at buyer's expense. For international shipping, please enquire. ---- Technical Data: Width B: 45 mm Length L: 160 mm Height H: 57 mm Cross groove N: 30 mm Bar S: 18 mm Hole spacing: L: 60 mm With/without screws: M16 x 1.5 Original price: over €550.00

Condition: new, Year of construction: 2025, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment Fpjdpfxof Ey Ums Agrsb SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, As-new CNC chuck lathe TAIKAN model HPT 08-380 Serial No. 2015122 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Maximum turning length without chuck: 350 mm Maximum turning length with chuck: approx. 300 mm Turning diameter (nominal): 250 mm Swing diameter over bed: 500 mm Travel of Z-axis: 385 mm Travel of X-axis: 200 mm Fedpswz Rifofx Agrepb Feed rate (X + Z): 1–8000 mm/sec. Rapid traverse (X): 30,000 mm/sec. Rapid traverse (Z): 36,000 mm/sec. Spindle speed, max.: 4500 rpm Spindle bore: 66 mm Draw tube bore: 50 mm Spindle nose: presumably A2-6 Workpiece weight incl. chuck: max. 200 kg Spindle drive motor power: 11 kW Power supply: 400 Volt, 50 Hz - Electronic handwheel - USB, LAN data interface + CF card - Drum turret with 12 tool stations - Hydraulic 3-jaw power chuck, Ø 215 mm - Infinitely variable spindle speed - Coolant unit - Chip conveyor with rear discharge + basic chip cart Machine footprint with chip conveyor: Length 2200 mm x Depth 2750 mm x Height 1700 mm Machine space requirement: Length 2200 mm x Depth 1750 mm x Height 1700 mm Chip conveyor dimensions: Length 2700 mm x Width 600 mm x Height 1400 mm Weight: 3.5 t Very good condition – as new Machine comes from a showroom and has only a few operating hours.

Condition: excellent (used), Planspiral.lathe chuck Auto Strong Fpodpfx Aoln Uixegreb Diameter 310 mm Mounting Camlock size 8 Cone diameter 139,735 6 stud diameter 25,4 Pitch circle diameter 171,4 Chuck height including flange 135 mm Weight 53 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm Fpodpfxsriicfo Agrjb -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Condition: like new (used), 1 set of used, hardened, reversible hard top jaws Manufacturer: SMW-Autoblock Mounting on base jaws type: BERG, FORKARDT, KITAGAWA, RÖHM, SMW-Autoblock, SCHUNK Base jaw types: MFG- SFG- FGB Size: 400–500 Dimensions: Width: 45 mm Height: approx. 75 mm Fpsdpjhlhbgefx Agrsb Length: 130 mm L-spacing: 60 mm F-slot: 18 mm Q-slot N: 30 mm Thread: M16 mm Application: wedge bar chucks, power chucks FORKARDT manual chuck F400 – F500 FORKARDT power chuck ø 500 mm KTNCV; SMW-KNCS; SCHUNK-THW500, Roto S, RÖHM-Duro, BERG-KHNC KITAGAWA-QJ21-QJ24 New price: >380.00€

Condition: new, Year of construction: 2025, Efficient lathe with a flat bed with a wide range of applications, dedicated to serial and unit production. The rigid construction of the lathe and massive hardened and ground guideways guarantee stability, turning accuracy and high repeatability of machining large-size details. Technical parameters TURNING DIAMETER OVER BED 560mm TURNING DIAMETER OVER SUPPORT 340mm MAXIMUM ITEM LENGTH 1500mm SPINDLE SPEED 100-800rpm SPINDLE BORE 90mm BED WIDTH 430mm SPINDLE A2-11 NUMBER OF TOOLS 8 TOOL SIZE 25X25mm TAILSTOCK MT 5 MAXIMUM TAILSTOCK TRAVEL 150mm ENGINE POWER 11kW DIMENSIONS 3770x1500x1900mm NET WEIGHT 4150 kg Available equipment SINUMERIK 808D control in Polish SIEMENS servo drives hydraulic 3 jaw lathe chuck Fodpfji Apf Tsx Agropb 8-station turret set of soft jaws hydraulic tailstock cooling system automatic lubrication system for gears and guides 24V halogen lighting manual in Polish & English EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg Fsdpjib D H Rsfx Agrepb In good condition

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4 pieces, hard, 2 sets -Jaw width: 25 mm -Dimensions: see photo techn. drawing -Price/sale: only complete -Dimensions: 200/90/H55 mm Fsdpfx Agsglwmgjrspb -Total weight: 4.1 kg

Condition: like new (used), functionality: fully functional, overall weight: 15 kg, total length: 150 mm, total width: 45 mm, chuck outer diameter: 500 mm, clamping range: 400 mm, jaw width: 45 mm, Warehouse clearance special price: 1 set of base jaws GBK500 with straight gearing for use with SCHUNK, SMW three-jaw chucks; ø500mm Manufacturer: SCHUNK Suitable for: three-jaw chuck or power chuck. ► SCHUNK SMW. ► Base and top jaws for chuck Ø 500 mm A = Length = 150 mm B = Width = 45 mm H = Height = 59 mm F = Slot = 18 mm Q = Transverse = 30 mm L = Bore spacing = 60 mm Fsdpewuvb Hofx Agropb ♦ Weight approx. 15 kg ♦ Price applies to the complete set ♦ 3 base jaws ♦ Immediately available from stock.

Condition: new, Year of construction: 2025, Efficient CNC Lathe CORMAK 320x750 SAM6 with Optional Equipment to Adapt to Your Needs. Thanks to the optional equipment, you can adapt the lathe to your needs. Choose from different controls, such as SINUMERIK 828, add a tool probe for automatic measurement, or a hydraulic chuck for quick and convenient operation. A wide range of additional options, such as a moving steady rest, a fume separator from inside the cabin, or even CAD/CAM software, make this lathe a versatile tool ready to meet even the most demanding tasks. Technical data TURNING DIAMETER OVER BED 320 mm Fpjdpfx Aswtnvmsgrsb TURNING DIAMETER OVER SUPPORT 90 mm (option 135 mm) CENTER DISTANCE 750 mm SPINDLE SPEED 100-2500 rpm SPINDLE BORE 60 mm SPINDLE NOSE MK5 NUMBER OF TOOLS 6 TOOL SIZE 16x16 mm MAXIMUM SHAFT DIAMETER IN BORE 44 mm TAILSTOCK NOSE MT3 MAXIMUM TAILSTOCK TRAVEL 100 mm MOTOR POWER 5.1 kW (S1)3.7 kW DIMENSIONS 2370 x 1420 x 2000 mm NET/GROSS WEIGHT 1040/1300 kg Available equipment SINUMERIK 808D control in Polish SIEMENS servo drives manual 3-jaw lathe chuck 6-position turret head set of soft jaws manual tailstock cooling system automatic lubrication system for gears and guides 24V halogen lighting DTR-ka in Polish CE declaration Optional equipment available SINUMERIK 828, FANUC, GSK controls hydraulic chuck hydraulic tailstock moving steady rest steady rest tool probe additional soft jaws hard jaws collet chucks gripper for machined parts bar feeder separator for vapors from inside the cabin separator for waste oil from coolant tool holders CAD/CAM software

Condition: used, 3-jaw chuck WMW type DHK 315x3 with individually and centrally adjustable jaws. Diameter: 315 mm. Inner diameter: 98 mm. Max speed: 1000 rpm. - Cylindrical centering ring mount Ø 265 mm - Scroll chuck with centrally adjustable jaws - Individually adjustable jaws via threaded spindle between base and step jaws - Stepped jaws can be used as both boring and turning jaws. Weight: 38 kg. Very good condition. Fjdpfxsxciwbj Agrspb

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set, drill jaw -Manufacturer: Röhm, drill jaw BB, size 200, 4-jaw set, 2 sets -Type: 110068 -Jaw width: 20 mm -Dimensions: see photo technical drawing Fpjdpfx Aox Ic Tiegrjb -Price/Sale: only complete set -Overall dimensions: 160/70/H53 mm -Total weight: 2.8 kg

Condition: new, Year of construction: 2025, These lathes are ideal for efficient and precise machining of not only metal but also other materials. Features involve machining internal and external cylindrical, frontal, tapered and semicircular surfaces as well as threading. The bed is a solid cast iron, resistant to vibrations. Induction-hardened and ground guides. Technical data SWING OVER BED 320 mm SWING OVER CROSS SLIDE 160 mm DISTANCE BEETWEN CENTERS 750 mm MAXIMUM ELEMENT LENGTH 1000 mm SPINDLE SPEED 100–2500 rpm Fsdpsi Apg Usfx Agrspb SPINDLE BORE 46 mm SPINDLE TAPER MT5 NUMBER OF TOOLS 6 TOOLS SIZE 16×16 mm MAXIMUM SHAFT DIAMETER IN BORE 44 mm TAILSTOCK TAPER MT3 MAXIMAL TAILSTOCK TRAVEL 100 mm MOTOR POWER 3 kW DIMENSIONS 2370×1420×2000 mm NET WEIGHT 950/1300 kg Available equipment SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 6-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English technical and engineering documentation EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, 4-jaw chuck WMW type DHK 315x4 with individually and centrally adjustable clamping jaws Diameter: 315 mm Inner diameter: 98 mm Speed: max. 850 rpm - Cylindrical centering ring mount Ø 265 mm - Scroll chuck with centrally adjustable clamping jaws - Individually adjustable clamping jaws via threaded spindle between base and step top jaws - Stepped chuck jaws can be rotated for use as drill or turning jaws Weight: 38 kg Very good condition Fsdjxciv Ropfx Agrjpb

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set Fpjdsq Exh Sepfx Agreb -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 34 mm -Dimensions: see photo technical drawing -Overall dimensions: 130/136/H80 mm -Total weight: 7.0 kg

Condition: used, Power Chuck, SMW Power Chuck Type HFK S 160-45 Serial No. 085009 Outer diameter: 165 mm Inner diameter: 45 mm Threaded connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Max. speed: 7200 rpm Max. clamping force: 3000 daN Fodpjxcbnfefx Agropb Jaw seating: 1/16" x 90° serration Total jaw width, serration with keyway: 35 mm Keyway width in serration: 17 mm - Jaw seating with precision ground serration - 3 pcs. soft top jaws - 6 pcs. T-nuts with mounting screws Chuck weight: 13 kg Good condition

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Manufacturer: Röhm, Top jaw set, rotary jaw set, 4-piece, for chuck size Ø160 mm, 2 sets -Jaw width: 18 mm -Dimensions: see photo technical drawing -Price/Fee: complete Fjdex Hfhyspfx Agrspb -Overall dimensions: 160/70/H50 mm -Total weight: 1.9 kg

Condition: used, Power chuck, 3-jaw wedge bar lathe chuck, type presumably Duro 1802W-411592 Chuck No. K W-411592 Outer diameter: 180 mm Inner diameter: 45 mm Thread connection for clamping drive: M52 x 1.5 mm Cylindrical centering ring mount: Ø 140 mm Mounting holes: 3x Ø11 mm Bolt circle: 105 mm Fpedpfx Aoxcbmhsgrob Max. speed: 5000 rpm Max. clamping force: 3000 daN Base jaw dimensions (L x W x H): 64 / 74 x 20 x 29 mm - 1 set of chuck jaws consisting of base jaws and reversible hard top step jaws - 1 set of chuck jaws consisting of base jaws and reversible soft top step jaws - 3 sets of soft top jaws Weight: 21.5 kg Good condition Additional sets of top jaws available under stock number 62056

Condition: good (used), Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Four-jaw chuck: chuck size Ø 125 mm -Passage: Ø 32 mm -Mount: cone 55 - 58 mm -Accessories: incl. 3 sets of interchangeable jaws -Dimensions: Ø125 x 125 mm Fedpfoxb T R Njx Agropb -Weight: 8.9 kg

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck -Manufacturer: SFN, magnetic clamping plate permanent magnetic lathe chuck with chuck flange -Type: PUSd-200 -Clamping surface: Ø 200 mm Fodoxd Upfopfx Agrepb -Bolt circle: Ø 160 mm M10 -Recording dimensions: see photos -Dimensions: Ø 200 x 60 mm -Total weight: 8 kg