Used Collet Chucks for sale (4,120)

Condition: used, 7 Collet sizes : 7-9-10-12-16-18-20 mm Knjdpfx Agsbn Rpiozsf

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. Kjdpfx Agox Hfugszjnf TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 workpiece height max.: - mm column diameter: 300 mm horizontal adjustment of the boring slide: 400 mm distance table - lower edge spindle: 200 mm spindle taper MT: MK 4 bore spindle stroke: 200 mm range of revolutions per minute - continous: 18steps 14-710 U/min Kjdpfxov S Ay Ss Agzjnf swivel range of the arm: 360 Grad feed: 0,09/0,12/0,25/0,5 mm/U weight of the machine ca.: 2,0 t dimension machine xH: 2,4 x 0,9 x 2,4 m Transportable! Operation via pressure switch Support feet 4x D=16x30mm Height-adjustable 60 mm with ratchet wrench *

Condition: ready for operation (used), Year of construction: 1975, arm 1200MM stroke head on bench 1400MM Knedjvm Akgspfx Agzof universal head portable radial

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Knodst Hwt Sopfx Agzof Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: good (used), DIGITAL BORING COLLET Ksdpfx As Dv N Iogzsnf

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 1700 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / 17 step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with 17 speeds Equipment: optical fine measuring device/measuring system Heidenhain for axes X/Y/Z/C-table hydraulics machine feet/footplates Ksdou Idtpjpfx Agzonf control panel with boom *

Condition: good (used), Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set Knjdpfjb A Rr Dex Agzsf -Weight: 90 kg

Condition: good (used), Tool holder, milling tool holder -Number: 21x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set Ksdpfjb A Rr Aox Agzonf -Weight: 88 kg

Condition: good (used), Tool holder, milling tool holder Ksdpfx Aob A Rr Eegzsnf -Quantity: 20x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 70 kg

Condition: good (used), Tool holder, milling tool holder Kedpfx Aob A H Spegzjnf -Number: 17x SK50 recording -Receptacles: Ø 22-50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Sale: only complete set -Weight: 68 kg

Condition: good (used), Tool holder, milling tool holder Kedpfx Aeb A N I Tjgzjnf -Number: 17x SK50 recording -Photos: MK -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills -Sale: only complete set -Weight: 68 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets Knedpfx Agjb A Rx Uszsf -Collet chucks: Ø 8-20 mm -Outer diameter: Ø 32 mm -Cone: Ø 40 mm -Cone length: 15 mm -Weight: 5 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 8-20 mm -Outer diameter: Ø 32 mm -Cone: Ø 40 mm -Cone length: 15 mm Knedpob A Rx Tjfx Agzef -Weight: 6 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Collet chucks: Ø 6-18 mm -Square collet chucks: 6-15 mm -Outer diameter: Ø 30 mm -Cone: Ø 40 mm -Cone length: 17 mm Kjdpfx Agob A Rycszenf -Weight: 6 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Types: different Knsdpfx Aob A R Iusgzef -Sale: only as a package -Weight: 5.5 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: 15x collet chucks of various diameters and hexagonal shapes -Outer diameter of recess: Ø 75 mm Knedsb A R Swspfx Agzef -Cone: approx. Ø 90/70 mm -Cone length: 40 mm -Weight: 22 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: approx. 40 collets -various sizes -Cone: approx. Ø 22/28 mm -Cone length: 13 mm Kedpfx Ajb A R Ufjgzenf -Shaft: Ø 20 mm -Sale: only complete set -Weight: 4 kg

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves -Quantity: 3x collet chucks 6/34/46 mm diameter -Quantity: 3x collet chucks 14/24/24 mm hexagon -Outer diameter of recess: Ø 77 mm -Cone: approx. Ø 93/75 mm -Total length: 120 mm -Weight: 12 kg Knjdpfx Ajb A Sbiogzjf

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collet sleeves Knjdpfx Aob A Smijgzsf -Collet chucks: Ø 6-25 mm -Weight: 2 kg

Condition: good (used), Tool holder, milling tool holder Kedsb A Smxjpfx Agzsnf -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg

Condition: good (used), Tool holder, milling tool holder -Number: 7x SK50 recording -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers Kjdpfx Asb A N E Togzenf -Sale: only complete set -Weight: 4.6 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Kedjb A Stfepfx Agzenf Price: complete Quantity: 10 available -Weight: 15 kg

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28/85 mm Price: per piece Kjdeb A Stcopfx Agzonf -Quantity: 16x Available -Weight: 1.2 kg/piece

Condition: good (used), Collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Outer diameter: Ø 42 mm -Thread: M40 x 1 mm -Total length: 116 mm -Quantity: 94 pieces Total price: 100 EUR Knedpfeb A Iixex Agzef -Weight: 35 kg