Used Drill chuck for sale (7,467)

Morse taper drill chuck holder

Call

Condition: used, Drill chuck, keyed drill chuck Bayf2y7fpjc -Manufacturer: Röhm, drill chuck Gear ring drill chuck MK2 -Type: S 1.5-13 1/16-1/2 J2 S2 -Clamping range: 1.5-13 mm 1/16-1/2" -Dimension: Ø 44 x 150 mm -Weight: 0.5 kg

more

Listing

Odenwaldstr. 63, 63322 Rödermark, DE

7,853 km

Drill Chuck m. inserts

MAY F 33

Call

Condition: good (used), machine/vehicle number: xxx, Technical data: -Quick change chucks with shank MK 3 -Total length 185 mm Dv97ti -Length 85 mm from spindle -Outer diameter on the retaining ring 72 mm - 7 St. quick change recordings - inserts 2 x MK3; 1 x MK 2; 4 x thread cutting recordings -Hozkiste -Total - weight approx. 17 kg - space requirement L 650 x W 200 x H 350 mm

more

Listing

Wiefelstede

(dealership location)

7,608 km

Albrecht MK3 B24x3 342600 3/24

€15

Call

Condition: used, Morse taper sleeve, tool holder, Morse taper, Morse taper, taper sleeve, adapter, drill chuck holder, drill chuck holder, taper mandrel, MT insert shank -Manufacturer: Albrecht, drill chuck holder -Hoffmann: Art.-No .: 342600 3/24 B0z8dypuh3 -Morse taper: MK3 -Drill chuck: B24 -Dimensions packaging: 165/30 / H30 mm -Weight: 0.5 kg

more

Listing

Radom

8,431 km

Paper drill Hang 114-00/4

Call

Condition: like new (used), Hang 114-00/4 paper drill The device is in very good condition. The highest class of machines among drilling machines. This is the currently produced model. The drill table is adjustable in every plane. Waste directed to an external container. Controlled by an electric foot switch. Each of the heads has an independent adjustment, which allows the use of drill bits of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm spacing of drills min: 36mm / max260mm drill speed: 1500 rpm F9bicyq two table lifting speeds table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools, drill bits.

more

Listing

Lesnická 2515/10, 789 01 Zábřeh, Česko

8,317 km

bohrmast

drill mast

€2,000

Call

Condition: good (used), pullback8 tons,working condition, for 3 meters drill pipes Fzgfc9g

more

Listing

Nieuwkuijk

7,533 km

paper drill

Paper drill Stago

€750

ONO plus VAT

Call

Condition: excellent (used), Very nice Paper drill robust design Stago type 1015. This machine has 2 speeds. Speed 1 is for large holes from 9 to 15 mm. Speed 2 is for small holes from 2 to 8.5 mm. 220 volt. Sliding table. Of course you are welcome to test this machine with us. We can arrange the transport/packaging for you and load it into a truck or container. Biziluik9 Ask for a price including transport (location the Netherlands). Regards Henk Hoos

more

Listing

Wiefelstede

(dealership location)

7,608 km

Faceplate

Skand Chuck Fabriks Größe 430 mm

€430

Heavy duty geared head drilling machine

Call

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: 430 mm -Short taper mount for: bayonet mount, taper size 6 -Hole circle: Ø 133.4 mm -Weight: 72 kg Bbvmlbnehn

more

Listing

7 Fraser Rd, Erith DA8 1PP, UK

7,247 km

Gate JFC 500S Geared Head Pedestal Drill JFC 500S Geared Head Pedestal Drill

Call

Condition: good (used), Year of construction: 2007, machine/vehicle number: 722040, A heavy-duty, geared head pedestal drilling machine with 4mt and a 50mm capacity in steel. 6 speeds for constant drilling torque and 4 x power feeds. Used Gate JFC 500S Geared head Pedestal Drill Specification Drilling capacity in Steel 50mm Spindle 4MT Spindle speeds (6) 50– 1510rpm Spindle travel 200mm Spindle to column 300mm Spindle to table (maximum) 680mm Power feed rates (4) 0.1-0.4mm/rev Column diameter 180mm Table size 600 x 600mm Motor 3kW Approximate weight 300kg Heavy duty, geared head pedestal drill with 50mm capacity. Machine equipped with C3pxoyeb Rack & pinion elevation to table Power feed to quill Chuck guard Coolant system

more

Listing

Pleystein

8,084 km

glass drilling machine

Skill Glass Drill Drill 1600

Call

Condition: good (used), Data: - Type: Drill 1600 - Serial number: DR03.2016 Bd39kreassg - 5-axis drilling machine - Year of manufacture: 2016 - Machine dimension: L 11330 x W 2400 x H 2570 mm - Min. glass dimension: 500 x 150 mm - Max. Glass dimension: 4500 x 1600 mm - Glass thickness: 3 - 20 mm - Connected load: 400V, 50Hz, 7bar, 9kW Price on request

more

Listing

Paper drill with automatic feeder Hang 136-10

Radom

8,431 km

Paper drill with automatic feeder

Paper drill with automatic feeder Hang 136-10

Call

Condition: good (used), Hang 136-10 paper drill with automatic feeder The machine is fully operational, ready for production. It is the most solid drill in its class, weight about 500kg, production Germany. Technical data: – 4 drilling heads – diameter of drills 2-10mm – stack height 60mm 8o0zor3pxs 380V power supply -automatic cycle of feeding material for drilling and manual – each head with independent adjustment (possibility of using drills of different lengths) – automatically lowered heads, adjustable material feed speeds and smooth drilling speed adjustment – adjustable spacing of heads (two border heads spacing even 400mm) The set includes: drills, operating tools, sharpener, instructions.

more

Listing

Kłodawa

8,021 km

WU Gomad universal lignum drill

WU Gomad universal lignum drill WU Gomad universal lignum drill

Call

Condition: reconditioned (used), Year of construction: 1998, WU Gomad universal lignum drill two horizontal units and an upper half automatic unit net price fv can be equipped with any heads activated by a pneumatic pedal Beeiwsi the upper logic works separately, the rear logic works separately both pneumatic clamps work intermittently without collision

more

Listing

Radom

8,431 km

gomad drill WU 3G 2002 YEAR LIGNUM

Iram paper drill 12-4

Call

Condition: good (used), Iram 12-4 paper drill The machine has four drilling heads. Technical data: – drill diameter: 3-9mm – stack height: 65mm – adjustable table lifting speed: 0-25mm / s – plunge distance from the forehead: 140mm – min drill distance: 60mm – max distance of drills: 240mm Be7tazgmnqz The drill has a hydraulic table lifting drive. Adjustment of heads with a crank. Quick adjustment of drilling speed and depth. Waste bin mounted inside the machine. Foot controls. 230V power supply The set includes tools, drill bits, user manual.

more

Listing

Kłodawa

8,021 km

drill gomad WU 3G 2002 YEAR LIGNUM drill gomad WU 3G 2002 YEAR LIGNUM

Call

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM Ckksssd2we WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

more

Listing

Wijchen

(dealership location)

7,560 km

Radial arm drill, Radial Drilling Machine Asquith

Asquith OD 1, 72mm

Call

Condition: used, Year of construction: 1980, Radial arm drill, Radial Drilling Machine Manufacturer:&nbsp Asquith Type:&nbsp OD1 MK2 16/72 Year: 1980 Arm-length: 1800mm Drilling length:&nbsp 1400mm Drilling depth: 350mm Capacity: 72mm Spindle-speed: 33-1500 rpm Spindle-take: MK5 Working-Block: 1200x900mm Dimensions: 2500x1000x3340mm Weight: 5000kg 3akql2vqi

more

Listing

Iserlohn

7,695 km

Three-jaw chuck

RÖHM KFD-315

€2,850

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Nmax:2800rpm in very good condition B087fwzj

more

Listing

Dortmund

7,677 km

High-speed radial drill

VAUMATEC / DONAU DR 32

Call

Condition: excellent (used), Year of construction: 2017, Drilling capacity in steel, 60 kg/mm² 32 mm Drilling capacity in cast iron, GG 20 45 mm Table clamping surface 1200 x 500 mm Distance from spindle center to column center 418 / 1018 mm Max. workpiece height 660 mm Height adjustment of the drilling head 400 mm Work table height 870 mm Column diameter 195 mm Bipnhb3rj3s Drill spindle holder MK 4 Speed range 41 - 1800 rpm Feed range 0.1 - 0.15 - 0.2 - 0.3 mm Drill spindle stroke 175 mm Boom, rotatable 360 Drive power 1.5 / 2.2 kW Dimensions approx. L x W x H 1200 x 2200 x 2300 mm Weight 1800 kg Accessories / special features: - Thread cutting device - Coolant device - Operating instructions with electrical and hydraulic diagram The machine was overhauled in 2017. The following work was carried out: Electrics, hydraulics, mechanics, geometry

more

Listing

Hessisch Lichtenau

7,826 km

Twist drill grinding machine, tool grinding machine

NSC SCHLUMBERGER AF 1

€3,500

Radial arm drill, Radial Drilling Machine, EMA

Call

Condition: used, Year of construction: 1974, Twist drill grinding machine, twist drill grinding machine NSC SCHLUMBERGER Manufacturer: NSC SCHLUMBERGER (France) Type AF1 No. 1049 Year of manufacture 1974 Grinding range Ø 10-80 mm Tool length max. 720 mm Point angle 80-160 º Tool speed with 2 cutting edges 40 rpm Tool speed with 3 cutting edges 26 rpm Tool speed with 4 cutting edges 20 rpm Feed rate 0.01- 0.1 mm/rev. 10 steps Grinding wheel diameter max. 230 mm Grinding wheel speed 2650 rpm. Nw9ob2k9 Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Precision six-jaw chuck REISHAUER Ø 240 mm, 6-80 mm clamping range - Dressing device with dressing diamond for dressing the grinding wheel - For grinding standard drills and other tools with 2, 3 or 4 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - for left- and right-cutting drilling tools, with gear changeover - relief grinding, clearance angle variably adjustable - Coolant device in the machine base frame Space requirement L x W x H 1400 x 800 x 1450 mm Weight approx. 800 kg good condition

more

Listing

Leipzig

7,966 km

Chuck

BISON 630x3 (Nr.58)

Call

Condition: used, diameter: 630 mm passage: 230 mm width: 135 mm revolution per minute: 500 U/min weight of the machine approx.: 276 kg dimensions L x W x H: mm 3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) Tbo87zqq 1 set of external jaws 1x chuck key

more

Listing

Enschede

7,601 km

Drill/milling machine

UWM 40A

Call

Condition: new, Year of construction: 2021, YOURM COLUMN DRILL TYPE 40A - MK4 - 75/1600 t/m - Turns right and left - Drain function - Drill part is adjustable in height - Drill bit tiltable Suoyks - Gear-driven - Protective cover - Emergency stop - Selfclamping drillhead - Technical documentation - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

more

Listing

Wijchen

(dealership location)

7,560 km

EMA 810mm

€3,500

ONO VAT not applicable

Call

Condition: used, Radial arm drill, Radial Drilling Manufacturer: EMA Capacity: 32mm Max. drilling depth: 300mm Spindle speed: 50-1750 rpm Distance: 810mm Travel: 580x600 Machine dimensions: 1500x800x2300 Biozm0qkmxy

more

Listing

Nevers

(dealership location)

7,693 km

Multiple drill

DUBUS

€2,300

Call

Condition: ready for operation (used), Technical characteristics multi-spindle drilling head (7) 3-axis manual orientable stroke 125 mm 4 manual length stops pneumatic cycle pedal control worktop height 900 mm Caractéristiques-perçagePneumatical adjusting cyclesPedal command Cw39mb2n Power and Motors Power: 2.2 Kw Overall dimensions

more

Listing

Schwabach

8,026 km

High-speed radial drill

DONAU , DR 32

Call

Condition: ready for operation (used), Used machine, suitable for rough work! Will be sold cheap. . Technical data : Drilling capacity into full 32 mm / pc. 60 Tapping capacity into full M 32 mm / pc. 60 Bipmfraiprk Mounting MK 4 18 Speeds 59 - 2580 rpm 3 feeds 0.1 / 0.15 / 0.2 mm/rev . Horizontal movement of the drilling head approx. 1000 mm Distance table - spindle nose max. 650 mm Quill stroke 190 mm .

more

Listing

Hessisch Lichtenau

7,826 km

Drill grinder

HAARMANN HSP 30

€2,350

Call

Condition: used, Year of construction: 1974, Drill grinding machine HAARMANN type HSP 30 make no. 7925 year of construction 1974 drill diameter max. 30 mm grinding wheel diameter 200 mm grinding wheel width 30 mm grinding spindle speed 1400 / 2800 rpm motor power 0,55 kW Mains connection 380 Volt, 50 Hz - Drive via hand crank - Movement via cam disk - Center angle infinitely variable - Diamond dressing holder - 5 different cams Bc9vggmxg0 space requirement L x W x H 870 x 650 x 1450 mm weight approx. 250 kg good condition

more

Listing

Sankt Egidien

8,017 km

Bench drill BT 12/1

WMW BT 12/1

Call

Condition: reconditioned (used), Year of construction: 1985, Table surface: 340 x 280 mm spindle mounting: MK 2 spindle stroke: 100 mm spindle speeds: 4 steps 450/900/1800/3550 rpm. drilling capacity in steel: 2-20 mm throat depth: 210 mm distance spindle/TIsch max.: 450 mm Cdduhi8nuh weight: 163 kg

more

Listing

Wiefelstede

7,607 km

two-arm pneumatic drill

Niles NB 50R

€150

Radial arm drill, Radial Drilling Machine MAS VO32

Call

Condition: used, two-arm drill, rotary drill, two-hand drill, two-hand drill, core hole drill, pneumatic screwdriver Bikqtzrxjlc -Manufacturer: Niles, two-hand pneumatic drill -Function: only right-hand operation -Type: NB 50R -Recording: MK4 -Drive: pneumatic -Dimensions: 180/990/H400 mm -Weight: 20kg

more

Listing

Wijchen

(dealership location)

7,560 km

MAS VO32

€3,500

ONO VAT not applicable

Call

Condition: used, Year of construction: 1994, Radial arm drill, Radial Drilling Manufacturer: MAS Type: VO32 Capacity:32mm Dm32z9 Max. drilling depth: 250mm Drilling capacity: 32mm Spindle speed: 90-4500 rpm Distance: 1000mm Recording: MK4 Machine dimensions: 1750x1050x2300

more

Listing

Nevers

(dealership location)

7,693 km

Two head drill

- 7334

€690

Call

Condition: ready for operation (used), Technical characteristics Binpiowuldk horizontal at the end opening 2 m Power and Motors Overall dimensions

more

Listing

NRW, Deutschland

7,694 km

Bench drill EINHELL

EINHELL SB 700

€75

Call

Condition: used, Type: SB 700 Year of manufacture: 1992 Condition: function-tested, very good, used - 5 speeds 480 to 2680 rpm. - motor 700 W / 230 V - collet chuck 13 mm H7wsnw2e

more

Listing

Hessisch Lichtenau

7,826 km

Drill grinder

GÜHRING SS 15

€2,000

Call

Condition: used, Year of construction: 1977, Drill grinding machine GÜHRING type SS 15 make no. 909 year of construction approx. 1977 drill diameter max. 40 mm Nwwp8ssb grinding wheel diameter right 300 mm grinding wheel diameter left 250 mm grinding wheel width 40 mm grinding spindle speed approx. 2800 rpm motor power approx. 2,2 kW Mains connection 380 Volt, 50 Hz - center angle infinitely variable - Pointing device - gear motor for height oscillation in front of the cup wheel - diamond dressing holder - various drill bit holders - coolant device space requirement L x W x H 1200 x 950 x 1550 mm weight approx. 1150 kg

more

Listing

Atlas Copco ROC 542HP w/ winch and vacuum

Nordland

6,954 km

Atlas Copco ROC 542HP w/ winch and vacuum

€14,127

Call

Condition: used, Year of construction: 2001, Operating hours: 9,991 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 16163 Specifications: - About 2001 model - Hours: approx. 9991 - 542 hp Dmeqk2 - Vacuum - Undercarriage (see pictures) - Winch - Ready for delivery Description: Atlas Copco ROC drilling rig. Equipped with a winch and a vacuum cleaner. Works as it should according to previous owner. About 9991 hours. Ready for delivery. Hours: 9991

more

Listing

ABI RE 12/14300 B Drill on O&K RH16 chassis

Germany

7,870 km

ABI RE 12/14300 B Drill on O&K RH16 chassis

€162,000

Call

Condition: used, Year of construction: 1994, Operating hours: 8,362 h, machine/vehicle number: 91171, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 1994 - ABI - RE 12/14300 B Drill on O&K RH16 chassis | Used Drill with 8362 hours in good condition. Our expert inspector checked 42 inspection points - 40 were approved, 2 showed imperfections, 0 presented issues. Buy it now for EUR 162.000 or make us an offer. We can deliver from Bremen, Deutschland to your destination. You can estimate the cost using our price calculator. CE marked: No EPA marked: No 42 Inspection points 40 Approved 2 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Bedeqyi Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Mindelheim

8,079 km

Heavy duty pillar drill

Alzmetall AB 5 / S

Call

Condition: good (used), Year of construction: 1958, Technical data: Tool holder: MK 5 Drilling capacity: 60 mm Speed, infinitely variable: 40 - 800 1/min Spindle stroke: 310 mm Feed rates: (5) 0.1 - 0.4 Table size: ø 610 mm Projection: 385 mm Column diameter: 220 mm Motor power: 4 kW Connection: 400 V 16 A Weight, approx.: 1300 kg Dimensions (WxDxH), approx.: 750 x 1600 x 2370 mm Equipment: - Machined base with T-slots - Infinitely variable speed adjustment - Feed device - Coolant foot without pump - R- L- run - Drilling depth stop Bcybt7d7 - Analog speed display - Service incl. oil change

more

Listing

Staufenberg

7,810 km

Three-jaw chuck

Unbekannt 150 t (Tisch 800 x 800 mm)

Call

pressing force: 150 t, installation height: 780 mm, motor power: 15 W, ram stroke: 500 mm, table length: 800 mm, table width: 800 mm, Condition: used, Hydraulic double column press Fabr. unknown Technical data: Pressing force 150 t / 0 - 600 kp/cm² Cylinder diameter 260 mm Stroke 500 mm Table size 800 x 800 mm Installation height 780 mm Drive power 15 kW External dimensions approx. 2250 x1400 x 3000 mm Weight approx. 6.2 t Functions - with and without throttle - with and without ejector Jc0ieeylv - Lower and upper piston - Set-up - Injection press 0-10 - Quick presses 0 - 150 sec. - with and without venting - T-slots in upper and lower table used, in good condition

more

Listing

Radom

8,431 km

3-jaw wedge bar lathe chuck

Nagel Citoborma 180

Call

Condition: good (used), Paper drill Nagel Citoborma 180 The device is 100% efficient. This is the latest model. The drill table is adjustable in every plane (sides, front/back). It has stops for setting the drilling spacing. The installed table is in the enlarged version. In addition, the drill has an automatic table lock, which is released after each cycle. Very good condition. Solid construction – weight 65 kg. Power supply 380V (reinforced compared to machines powered by 230V) One drilling head. 3rd0xyobjt Drill diameter 2-20 mm. Stack height 60 mm. The machine is overhauled. The set includes drills and tools, a new cutting stick, instruction manual

more

Listing

Hessisch Lichtenau

7,826 km

FORKARDT F+160

€750

Call

Condition: used, 3-jaw wedge bar lathe chuck FORKARDT TYPE F+160 No. 1659 181 Identical in construction Forkardt F315 or SMW diameter: 160 mm Inner diameter: 45 mm Chuck flange: short taper DIN 55022 size 6 1 set of chuck jaws consisting of base jaws and hard top step jaws for turning Bpclnaeo 1 set of chuck jaws consisting of base jaws and soft top step jaws for turning - central adjustment Weight: 11 kg sound condition

more

Listing

Nord-Trondelag, Norway

7,107 km

Atlas Copco SmartRoc T45- 11 Drill Rig

€74,286

Call

Condition: used, Year of construction: 2013, Operating hours: 12,650 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 15204 Specifications: - 2013 model - Hours: approx. 12,650 - Belt hours: approx. 947 - 242 kw - 19,990 kg - Undercarriage (see pictures) - Width: approx. 270 cm - GPS - Engine changed in 2021. - Hammer changed in 2022 - Winch - Reversing camera - Extra light - Radio/CD - Climate/AC - Service history Bdyb7yvzgi - Ready for delivery. Description: 2013 Atlas copco T45 Drill Rig. Brackets are not included. Engine was changed in 2021 and hammer in 2022. Services followed and performed every 250 hours. Ready for delivery. Hours: 12650 Total Weight: 19990

more

Listing

Nordmeyer DSB 1/3.5 on Unimog U1850 on Unimog U1850 chassis

Germany

7,870 km

Nordmeyer DSB 1/3.5 on Unimog U1850 on Unimog U1850 chassis

€73,000

Call

Condition: used, Year of construction: 1993, Operating hours: 42,471 h, machine/vehicle number: 1223, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 1993 - Nordmeyer - DSB 1/3.5 on Unimog U1850 on Unimog U1850 chassis | Used Drill with 42471 hours . Our expert inspector checked 41 inspection points - 40 were approved, 1 showed imperfections, 0 presented issues. Buy it now for EUR 73.000 or make us an offer. We can deliver from Dobra, Polen to your destination. You can estimate the cost using our price calculator. CE marked: No EPA marked: No 41 Inspection points 40 Approved Dk3f3f 1 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Radom

8,431 km

Tool Grinding Machine, Twist Drill Grinding Machine

Hang 113-00

Call

Condition: good (used), Hang 113-00 paper drill The machine is in perfect condition, the latest product. SmartDrill – A small four-spindle paper drill for a digital or offset printing house. A cost-effective solution for production jobs with standard hole patterns. Incorrect or inaccurate hole offsets are a thing of the past. Bigmi9ngngd Model Hang 113-00 4 spindles, fixed spacing 80 mm Drilling diameter 3 – 8 mm Adjustable distance from the edge from 6 mm – 23 mm Drilling time 5.5 sec. paper stack height up to 56 mm Fast, precise shifting from A4 to A5 or A6 in less than 10 seconds Starting with a foot switch Auto power off: standby mode Driven by a single-phase motor Noise level 72 dB (A) Weight 130 kg

more

Listing

Hessisch Lichtenau

7,826 km

BORA 1/BM 40

€5,800

Call

Condition: used, Year of construction: 1997, Tool grinding machine, twist drill grinding machine BORA type 1/BM 40 make no. 49697 year of construction 1997 grinding range Ø 3 - 40 mm point angle 40° - 180 motor power 1,1 kW grinding wheel dimension max. Ø 200 mm grinding wheel speed 2840 rpm. Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with strong core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0,18 kW) - for left and right cutting drilling tools by exchangeable cams - cam disks easily exchangeable for 2 or more cutting tools - 4 pieces of cam disks - centering mandrel for MK1, MK2, MK3, MK4 - built-in is a white grinding wheel with Ø 170 mm and 40 mm width - metal base with door and shelf - wet grinding device beside Btqn2r8z - Operating instructions per PDF space requirement L x W x H 900 x 850 x 1250 mm weight 220 kg very good condition

more

Listing

Tamrock Commando 120R Drill rig w/ radio control

Nord-Trondelag, Norway

7,107 km

Tamrock Commando 120R Drill rig w/ radio control

€29,115

Call

Condition: used, Year of construction: 2005, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 16046 Specifications: - 2005 model - Hours engine: approx. 6500 - Hour hammer: approx. 2400 - 2850 kg - 37 kw - Tires (see pictures) - Radio control - Winch - Rotor lamp - Extra light - Services taken by owner - Ready for delivery. Description: Tamrock Commando 120R from 2005. The drilling rig works as it should. The oil, diesel filter and air filter have recently been changed. Emergency stop is disconnected. Ready for delivery. Total Weight: 2850 Kw: 37 Jumz38tzjr

more

Listing

Delmag SR 25 BT / RH 18 on Sennebogen SR25BT chassis

Germany

7,870 km

Delmag SR 25 BT / RH 18 on Sennebogen SR25BT chassis

€224,000

Call

Condition: used, Year of construction: 2008, Operating hours: 5,834 h, machine/vehicle number: 525.6.312 und 974, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2008 - Delmag - SR 25 BT / RH 18 on Sennebogen SR25BT chassis | Used Drill with 5834 hours . Our expert inspector checked 65 inspection points - 65 were approved, 0 showed imperfections, 0 presented issues. Buy it now for EUR 224.000 or make us an offer. We can deliver from Uelzen, Deutschland to your destination. You can estimate the cost using our price calculator. Xblubxytm CE marked: No EPA marked: No 65 Inspection points 65 Approved 0 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Radom

8,431 km

Adjustable 2-spindle drill head, double drill head M

Nagel Citoborma 490

Call

Condition: good (used), Nagel Citoborma 490 paper drill It is the largest Citoborma drill currently in production. Perfect condition, ready for production. The machine has 4 drilling heads. The drilling waste is directed to the basket on the back of the machine. Machine operation with a foot pedal or with two-handed buttons. Each head has a separate up / down adjustment, which allows the use of drills of different lengths. The set includes spare drill bits, tools and instruction manual. Technical data: Number of drilling heads in total 4 (possibility of quick disassembly of each of the heads) Qvld2 Max. stack height: 60mm Drill size: 2-10 mm Adjustable spacing in the range: 45 – 425mm Two drilling speeds 380V power supply Weight 365 kg

more

Listing

Hessisch Lichtenau

7,826 km

SPV = S-P-V AH7-31,2

€500

Call

Condition: used, Adjustable 2-spindle drilling head SPV = S-P-V type AH7-31,2 Double drilling head, multi-spindle drilling head Make No. 22112 - 392 Drilling capacity per spindle 6 mm (in steel) Tapping per spindle max. M6 (in cast iron) Tapping per spindle max. M4 (in steel) Tool holder Ø 6 mm Collet Spindle output 2 pieces Spindle distance (center spindle to center spindle) 18 to 110 mm Sog2rjxzm Drill head spindle drive MK 2 Drilling spindle speed max. 3500 rpm. transmission ratio 2.158 : 1 (input 1 rpm = output 2 rpm) - 2 tool spindles infinitely variable in spindle distance by turning - only one collet and one nut for collet available dimension W x D x H 130 x 65 x 220 mm weight 3 kg

more

Listing

Buskerud, Norway

7,205 km

Atlas Copco Roc 712 HC-01

€7,437

Call

Condition: used, Year of construction: 1990, Operating hours: 12,650 h, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 13979 Specifications: - About. 1990 model - Hours: 12,650 - Vacuumcleaner - Undercarriage (see pictures) - Winch - Service done by owner - Ready for delivery Description: Atlas Copco drilling rig for sale. Dmeoyh It is somewhat expensive, it is sold without a battery. Equipped with a winch and a vacuum cleaner. Ready for delivery. Hours: 12650

more

Listing

Germany

7,870 km

HAUSHERR HBM 80 R/DR

€11,400

Hang 114-30/4 paper drill

Call

Condition: used, Year of construction: 1985, Operating hours: 4,101 h, machine/vehicle number: 49061/23, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 1985 - HAUSHERR HBM80 R/DR | Used Drill with 9 COP32 drilling rods of 4m each, max depth of 36m, and a Deutz Engine. CE marked: No EPA marked: No 64 Inspection points 52 Approved 1 Imperfections 11 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Bf9r78xyphn Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Radom

8,431 km

Call

Condition: good (used), Hang 114-30/4 paper drill The device is in perfect condition, 100% functional. The highest class of machines among drilling machines. This is the currently produced model, equipped as best as possible. Smooth regulation of spindle rotation in the range of 260 – 1,800 rpm and smooth lifting of the table – built-in two inverters. Quick zeroing of drills The drill table is adjustable in every plane, the margin is adjustable on dial indicators. Waste directed to an external container. Controlled by electric foot switch or by hand buttons. Standby function to save electricity. L70am02qr7 Automatic tensioning of drive belts. Each of the heads has an independent adjustment, which allows the use of drills of different lengths. Technical data: number of drilling heads: 4 drill diameter: 3-10mm stack height: 65mm spacing of drills min: 36mm / max260mm table dimensions: 600x480mm Power supply: 400V Weight: 400kg The machine has documentation, operating tools, drills.

more

Listing

Germany

7,870 km

Hütte 505

€36,900

Call

Condition: used, Year of construction: 1998, Operating hours: 8,012 h, machine/vehicle number: 1579538, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines Hqvi8tui • Delivered to your jobsite • Money Back Guaranteed 1998 - Hütte - 505 | Used Drill with 8012 hours . Our expert inspector checked 58 inspection points - 56 were approved, 2 showed imperfections, 0 presented issues. Buy it now for EUR 36.900 or make us an offer. We can deliver from Dobra, Polen to your destination. You can estimate the cost using our price calculator. CE marked: No EPA marked: No 58 Inspection points 56 Approved 2 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Germany

7,870 km

Ingersoll Rand CM 780D

€100,800

Call

Condition: used, Operating hours: 6,233 h, machine/vehicle number: C78253DL, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed - Ingersoll Rand - CM 780D | Used Drill with 6233 hours in good condition. Our expert inspector checked 74 inspection points - 73 were approved, 0 showed imperfections, 1 presented issues. Buy it now for EUR 100.800 or make us an offer. We can deliver from Boulazac Isle Manoire, Frankreich to your destination. You can estimate the cost using our price calculator. For fast, accurate DHD drilling of 4-1/2 to 6-1/2 in. (114 to 165 mm) holes to depths of 90 ft. (27.4 m) on a compact, efficient unit, the CM-780D provides maximum performance. CE marked: Yes EPA marked: No 74 Inspection points 73 Approved 0 Imperfections 1 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more! E080zuex7

more

Listing

Germany

7,870 km

Furukawa HCR 900 ED

€67,200

Call

Condition: used, Year of construction: 2004, Operating hours: 6,663 h, machine/vehicle number: 1251022, We are ACCEPTING OFFERS for this unit! Buying with Equippo is easy: Qd7jqvv • Fully inspected machines • Delivered to your jobsite • Money Back Guaranteed 2004 - Furukawa - HCR 900 ED | Used Drill with 6663 hours in good condition. Our expert inspector checked 76 inspection points - 76 were approved, 0 showed imperfections, 0 presented issues. Buy it now for EUR 67.200 or make us an offer. We can deliver from Montlaur, Frankreich to your destination. You can estimate the cost using our price calculator. CE marked: Yes EPA marked: No 76 Inspection points 76 Approved 0 Imperfections 0 Issues Contact us for more information and a FULL INSPECTION REPORT with detailed pictures and videos and the final price including delivery to your location. Questions? Our sales agents speak 13 languages. Are you looking for more equipment? We can help you find used tracked excavators, used mini excavators, used wheel loaders, used single drum rollers, used telescopic boom lifts, used articulated boom lifts, used scissor lifts, used telescopic forklifts, used crushers, used screens and more. Our stock includes leading brands such as: Caterpillar, Komatsu, Liebherr, Hitachi, Volvo, Case, Doosan, Bomag, Hamm, Dynapac, Manitou, Wirtgen and more!

more

Listing

Caterpillar AF6 IMT B LC / IMT AF 6 DRILL 42M

Germany

7,870 km

Caterpillar AF6 IMT B LC / IMT AF 6 DRILL 42M

€55,000