Used Mag Drill for sale (17,931)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. Kedpfx Abexw Rpuj Ujdw 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences Kdsdpfxjdpcfls Ab Usw - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: excellent (used), Year of construction: 2021, Maggi Boring System 29 Multi-Spindle Drilling Machine Number of spindles: 29 Speed: 2800 rpm Distance between first and last drill: 896 mm Noise level: 76.1 dB Kedpsxvctvofx Ab Usdw Number of pneumatic clamps: 2 Center distance between spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Weight: 370 kg Working pressure: 6–7 bar Motor power: 1.5 kW Max workpiece thickness: 70 mm Spiral System – device for rapid drilling depth adjustment CE certified Year of manufacture: 2021

Condition: new, Year of construction: 2023, machine/vehicle number: MR005217, Unique 3-axis controlled machine for horizontal and vertical drilling in on sheet metal and solid wood for furniture and interior construction. Machine easy to set via touch screen display, programs easy to call up.Machine is equipped with the following options: - Reference pin for row drilling - Additional pneumatic clamping units - Reference tool for setting clap stops Technical specifications: - Maximum panel thickness : 60 mm - Number of drilling spindles total : 21 pieces - Number of drilling spindles counterclockwise : 10 piece - Number of drilling spindles clockwise : 11 pieces - Spacing between drilling spindles : 32 mm - Total distance first and last spindle : 640 mm Kdsdpfx Abeugu U Sj Uew - Maximum drilling diameter : 40 mm - Maximum drilling depth : 65 mm - Maximum drilling height : 55 mm - Engine power : 2 hp - Serial number : 1622300606

Condition: excellent (used), CNC-Gantry Flexible Automatic through-feed Boring Machine with Dowels inserting system Movable panel (horizontal position of workpiece/panel), movable working head Numerical Control Power Control, Software WoodWOP Overall integral safety cabin (enclosure) of the machine Panels (workpieces) feeding by motorized belts 3 Feeding speed (m/min) 1 - 90 (ca.) Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1400 x 60 Maximum stroke of the axis (X - Y - Z) mm 3580 x 1838 x 125 Two panels simultaneously processables (in Y axe) mm 600 + mm 600 Total installed power (Kw) 38 WORKING GROUPS (TOP): Drilling heads with vertical spindles (No.) 1 Independent vertical boring spindles (No.) 38 + 3 special Independent horizontal boring spindles (No.) 6 Circular Grooving Saw (on X axis) dia. (mm) 100 Vertical electro-spindle (No.) 1 x SK 30 (Vertical electro-spindle motor power (Kw 6) Kdjdpfjd Nvi Djx Ab Ujw Automatic Tools Changing System, Tools storage plate (No. 3 folds- positions) WORKING GROUPS (HORIZONTAL) Drilling heads with horizontal spindles (No.) 2 Horizontal drilling spindles - Right side (No.) 13 + Left side (No.) 13 Inserting nozzle and glue injectors (Right side) No. 2 + (Left side) No. 2 Storage tanks for automatic feeding of the dowels (No.) 1

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 0-250-87-6869, Drilling head with 8 spindles (V8 SW/32) Horizontal drilling head with 4 spindles on X Horizontal drilling head with 2 Kdodpfx Absvtyc He Usw spindles on Y Grooving saw D=100 mm Stopping cylinder for workpiece positioning Workpiece clamping system Workpiece length 2500 mm Workpiece thickness 12-60 mm WOODWOP for machine WOODWOP IMPORT DXF BASIC (1 license)

Condition: used, Magnetic drill, hand drill -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 Kodpfx Aofc R D Aob Uedw -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional Kdedpfjdf S Rzox Ab Usw TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: new, ELMAG drill grinder DBG 832 W 8 - 32mm DBG - 3 in 1 The DBG series drill grinder is used for grinding twist drills made of HSS and carbide twist drills. The machine has integrated grinding stations for grinding the point angle, the clearance angle and for cross grinding. Special CBN or SDC diamond grinding wheels are used, which are to be used depending on the drill material. Ksdpfx Abjt Hhg Ns Usdw material. SDC coated grinding wheels Metal-coated synthetic diamond for sharpening carbide drills. CBN coated grinding wheels Deliver sensational sharpening results at very high speed and without annealing. The special thermal conductivity of CBN (boronite crystals) dissipates the resulting frictional heat into the wheel, preventing hardening of the cutting edge and virtually eliminating sparking. CBN has a higher thermal stability than diamond and is ideal for sharpening HSS tools due to lower wear. Optionally available: Grinding wheel SDC for DBG 832 W Order no. No. 61016 Collet chuck holder for Ø 31-32 mm for DBG 832 W Collet set (ER40) 2-piece, Ø 31-32 mm for DBG 832 W Now free of charge with both models Collet holder and collet set ER 20 or ER 40 ADVANTAGES CBN grinding wheel for HSS Adjustment device for center angle 95°-135 Clearance angle grinding function Cross grinding function For drill bits 8-32 mm 23 collets 8-30 mm TECHNICAL DATA Grinding range drill bit Ø 8 - 32 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.25 kW Mains connection 230/50 V/Hz Length 490 mm Width 250 mm Height 260 mm Weight 27 kg

Condition: excellent (used), Maggi Boring System 29 Multi-spindle Drill Kodjwclktepfx Ab Uedw Number of spindles 29 Speed 2800 rpm Distance between first and last drill 896 mm Noise level 76.1 dB Number of pneumatic clamps 4 Distance between the centers of individual spindles 32 mm Max drilling depth 65 mm Air consumption 10 l/cycle Weight 370 kg Working pressure 6 – 7 bar Motor power 1.5 kW Max element thickness 70 mm Spiral System - device for quick adjustment of drilling depth CE certificate

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections Kodpfxjp Ecdgs Ab Uodw -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: -2 1.5 m long aluminum rulers (right and left) with two stoppers -5 quick-action chucks Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Kdedsvx Aqdspfx Ab Usw Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: new, Year of construction: 2024, functionality: fully functional, - Single-head drilling machine for drilling from 0 – 90 ° - Pneumatically adjustable head angle - Cast iron spindles - High-speed spindles - Pneumatic material clamps - Cast iron worktable - Quick and precise setup - Accurate drilling STANDARD MACHINE EQUIPMENT: - 2 aluminium rulers, each 1.5 m long (right and left) with two stops - 5 quick-release drill chucks Kedpjxwcbcefx Ab Uodw Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic presses: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 – 7 bar Rotation speed: 2800 rpm Motor power: 1.5 kW Noise level: 76.1 dB Dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm Pickup: Almelo, Netherlands Mobile: +31634707163

Condition: ready for operation (used), Technical characteristics Power and Motors Overall dimensions Kdedpfx Aeryt A Ieb Uew

Condition: used, Magnet Drilling Machine, Magnet Drilling Machine core hole drilling machine, metal core hole drilling machine DR. BENDER Type EK 323 machine no. 180543 year of construction approx. 1988 drilling capacity 23 mm spindle mounting MK 2 spindle speed 160 / 400 / 1250 rpm. magnet 215 x 105 mm drilling unit 220 Volt, 50 Hz, 1025 Watt E-magnet 220 Volt, 50 Hz, 65 Watt - Spindle speed via 3 gear steps - left and right rotation - E-magnet KOCH, type KL32/6 - drill head height adjustment guided in linear guide Kdsdpfjgmi U Dsx Ab Uew - manual ejector - drill stand rotatable on magnetic base, clamping via tommy screw dimension L x W x H 680 x 380 x 630 mm weight 35 kg good condition

Condition: good (used), I SELL FEIN PS 50 MAGNETIC DRILL. IN VERY GOOD CONDITION. Kjdoulc Tujpfx Ab Uodw

Condition: good (used), Year of construction: 2018, Burning and Drilling System / Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic turret Tool holder capacity: 14 tools Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring scribing: 5 to 40 mm Sheet size min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum finished part size: 80 x 80 mm Max. sheet weight: 2,600 kg and 650 kg/m Feed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero position cross conveyor Number of clamps: 2 NC-feed carriage, mounted on the side Kdjdpfxovzrczs Ab Uew 4 clamping jaws (2+2) 3 short-stroke transversal conveyors Working height: 1,000 mm Discharge side: Discharge roller table with lowering unloading table and chute into collection container for unloading small parts. Filter unit incl. piping High performance for the use of carbide tools. For drilling, tapping, marking, milling, plasma cutting of flat steel and sheet metal. Software options for milling and scribing LANTEK license Availability: immediate

Condition: new, machine/vehicle number: 37 R9633-2, Drill-Ø with twist drill up to: 13 mm Drill-Ø with crown drill up to: 35 mm drilling stroke: 115 mm Kdjdpfxjc N T Hrj Ab Uew drive power: 680 W electrical connection: 220/240 V magnetic base dimensions: 92 x 172 mm weight: 13 kg

Year of construction: 1989, condition: good (used), machine/vehicle number: P28979, Magnetic drilling machine with safety transformer Offer 20427 Technical data: - drilling capacity approx. 32 mm - Drilling spindle mount MK 3 - throat 70 mm - stroke approx. 175 mm - 8 speeds approx. 10 - 420 rpm - drive 42 V / 960 Watt - magnetic base 100 x 220 mm Kdjdpfx Aogzhnisb Uew - magnetic base left + right swivelling drilling machine carrier - Space requirement approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer - isolating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space requirement approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 850 mm, feed length Z-axis: 56 mm, power: 10 kW (13.60 HP), Homag drilling and milling machine Very compact machine Kdedpfjxpnkgox Ab Uew Commissioned 6/2/2019, first owner Always maintained by Optimat, all invoices available Barcode scanner 13 vertical drills, quick-change system (left / right) 4 horizontal drills in X direction (left / right) 2 vertical drills in Y direction (left / right) 1 groove saw 100mm in X direction 4 tool changer positions for HSK63 router 10kW Workpiece length 200mm to 3050mm Workpiece width 70mm to 850mm Workpiece thickness (8)12mm to 56mm Machine measures each workpiece on X Y and Z, so incorrect workpieces cannot be input. Woodwop control Works perfectly, can be seen in operation. Available January 2026 Selling due to purchase of V310 Tools not included 400V Can be loaded with forklift. Price 44,500 excl. VAT

Condition: used, Year of construction: 2018, operating hours: 5,400 h, functionality: fully functional, machine/vehicle number: 0-250-97-8163, HOMAG DRILLTEQ V-200 Optimat BHX055 Machining Center – used – Machine purchased in December 2018 / commissioned January 2019 Processing in throughfeed mode, Ball screws on all axes, Network card for remote service support, Saw unit for grooving in X-axis, Pick-Up type tool changer, Ite Dibow Hdh Es Ia Asn Integrated control cabinet ----- Technical Data ----- Minimum workpiece length X: 200 mm, Minimum workpiece width Y: 70 mm, Kjdpfxoxpukgo Ab Usdw Minimum workpiece thickness: 8 mm, Maximum workpiece length X: 3,050 mm, Maximum workpiece width Y: 850 mm, Maximum workpiece thickness: 56 mm, Machine control software: WOODWOP 8, Screen diagonal: 24 inches, touch screen, Main spindle motor power: 10 kW (S6), Main spindle speed: 1,250 – 24,000 rpm, Main spindle holder: HSK-F63, Drilling unit motor power: 2.3 kW, Number of vertical drilling spindles: 13 pcs, Number of double horizontal drilling spindles in X-axis: 2 pcs, Number of double horizontal drilling spindles in Y-axis: 1 pc, Saw blade diameter: 100 mm, Number of tools in changer: 4 pcs, Vector speed (X-Y): 50 m/min. Quality information: - comprehensive basic cleaning - electrical system checked - pneumatic system checked

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Kedpfowtpu Dex Ab Usdw Workpiece width 70-850mm Workpiece thickness 8-56mm Powertouch screen Woodwop for machine CNC 3D Simulation for the machine Energy Saving Mode

Condition: like new (used), Year of construction: 2021, For sell Full automatic line for edge banding with loader, edgebander, robots for handling and drilling machine Edgebander specification: HOMAG EDGETEQ S-500 Profi KAR 375/20/V25/WZ edge bander Year of manufacture 2021 Continuous feed 16 – 25 m/min Workpiece thickness 12 – 60 mm Workpiece feeding system WZ10 fully automatic Workpiece length approx. 240 – 2500 mm Workpiece width approx. 120 – 1200 mm Release agent spray unit Jointing and trimming unit S2 with 2 motors, each 3 kW Gluing unit PUR with QA/PU adhesive application Edge magazine 24-position automatic Edge thickness approx. 0.3 – 3 mm Automatic and continuously variable edge clamp Pressure zone A with approx. 5 rollers Cross-cut saw unit PK25 with 2 motors, each 0.8 kW Pre-trimming unit BF10 with 2 motors, each 0.55 kW Profile trimming unit PF21 Flextrim with 2 motors, each 0.4 KW Form milling unit FK30/V20 with a maximum speed of 20 cycles/min Flextrim trimming unit, motor 0.7 KW and servo drive Multi-profile scraper MN21 automatic with triple tracing Flat scraper FA20 Buffing unit FP10 Standard trimming unit SF21 with a 5 KW motor For grooving and rebating Continuously adjustable vertical and horizontal axis Power Control PC 23 Powertouch control system Flexible edge tracking control and setup in the gap Specification of all the line: MUTZ Portal loading Year of manufacture 2022 Gantry with vacuum loading 3 pallet positions Feed roller conveyor WANDRES Una H-X 321 Surface cleaning Year of manufacture 2021 Brush top/bottom HOMAG RKT 100 Feeding K Feed roller conveyor Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse HOMAG RKT 100 outfeed roller conveyor with circulation system Year of manufacture 2021 KUKA KR 140 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 140 kg Maximum reach approx. 3195 mm Vacuum traverse Stacking station for pallets or circulation system HOMAG RKT 100 Buffer and sorting compartment system with circulation system Year of manufacture 2022 Buffer high-bay racking system Kodpfx Abexf Tvts Ujdw Roller conveyors Robot removal roller conveyor for the racking system Racking system Circulation system KUKA KR 180 R3200-2K/FLR Robot with approx. 4 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3505 mm Plate gripper HOMAG DRILLTEQ H-600 Optimat BHX 500 CNC-controlled drilling machining center with circulation system Year of manufacture 2021 Workpiece length approx. 200 – 3100 mm Workpiece width approx. 70 – 1000 mm Longitudinal feed table with automatic workpiece feed Drilling head vertical top/bottom with each approx. 42 spindles Drilling head horizontal top/bottom with each approx. 8 spindles in X direction Drilling head horizontal top/bottom with each approx. 2 spindles in Y-direction Grooving saw unit top/bottom pivots 90° Milling spindle ETP top/bottom with each approx. 6 kW Speed 6.000 – 18.000 U/min Power Control PC86 Powertouch WoodWOP 7.2 HOMAG RKT 100 Stacking system Year of manufacture 2022 Roller conveyors WANDRES Una X 121 surface brush Outfeed roller conveyor KUKA KR 180 R3200-2PA/FLR Robot with approx. 5 axes Year of manufacture 2021 Maximum load capacity approx. 180 kg Maximum reach approx. 3195 mm Vacuum traverse Layouts

Condition: new, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 0-250-87-1000, NEW THROUGHFEED DRILLING MACHINE DRILLTEQ V-200 (BHX 055) Permanently integrated features: Drilling head with 13 spindles ✓ Horizontal drilling head with 4 spindles on X ✓ Horizontal drilling head with 2 spindles on Y ✓ Grooving saw D=100 mm (X direction) ✓ Positioning cylinder for workpiece positioning ✓ Workpiece clamping system ✓ Workpiece length 3050 mm ✓ Workpiece thickness 12–60 mm ✓ WOODWOP 7 for the machine ✓ Kodpew U Ty Sjfx Ab Usdw Milling motor with frequency inverter 5kW (ETP) ✓

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-253-84-7710, CNC-controlled drilling and dowel insertion machine The machine is fully equipped (all available options) Drilling heads with 5 spindles each, horizontal and vertical Axes in X, Y, and Z directions 2 milling units: 1 horizontal and 1 vertical Milling spindle speed max. 24,000 rpm Clamex can be milled horizontally Clamex can be vertically milled up to a maximum of 50mm into the panel Kdsdpfx Ajw Rk E Djb Ujw Tool holder Solidfix S3 Tools are not included with the machine 2 vibratory feeders with 2 dowel insertion units Dowel diameters: Ø6mm and Ø8mm 2-position pneumatic stops, program-controlled High-pressure glue pump with glue flow monitoring Automatic cleaning cycle for cleaning the glue nozzles Cleaning system for the glue supply 6 pneumatic hold-down units automatically adjust to the workpiece thickness Climate control unit for the control cabinet and UPS for the PC PowerControl PC87 Powertouch WoodWOP 7.1 Barcodescanner IntelliGuide Classic