Used Mag Drill for sale (17,912)

Condition: new, ELMAG gearbox milling and drilling machine MFB 30 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, it covers a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Taper arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Itsdpst Ef Dijfx Aaaep Drilling capacity in steel 30 mm Tapping capacity M18 Milling capacity face milling cutter 80 mm Milling capacity end mill 20 mm Spindle holder (turning spindle) MK 3 Speed range 1 50 - 750 rpm Speed range 2 150 - 2250 rpm Infinitely variable speed steps Quill stroke 70 mm T-slots, width 14 mm Milling head stroke 370 mm Spindle projection 180 mm Milling head swivel range ± 90 ° Quill distance table 90 - 460 mm Milling table surface 700x210 mm Table travel X x Y 425 x 220 mm Motor power 1100 W Mains connection 230/50 V/Hz Cubature 700x210x460 mm Length x width 970 x 710 mm Height 1190 mm Weight 240 kg

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) Ijdpfx Aaowbil Seaotp ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Machine type: Samag TFZ 2L-1000 Control system: Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Ijdew Ecftepfx Aaastp Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required Iedpfx Aei Hqhfoaaotp 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: like new (used), Year of construction: 2018, functionality: fully functional, SPECIFICATION • Diverse solutions for woodworking: The "F" series throughfeed CNC machine offers unique solutions for modern woodworking • Zero setup time: The toolhead also functions as a tool magazine, reducing changeover times • All drilling operations performed in a single cycle • Load capacity up to 70 kg, enabling processing of larger/thicker elements such as kitchen countertops • Software control via machine control panel or remote controller • Machine manufactured in compliance with CE standards Working dimensions: X-axis: min. 240 mm, max. unlimited Y-axis: min. 80 mm, max. 1200 mm* Z-axis: min. 10 mm, max. 40 mm TECHNICAL DATA • 12 vertical drilling spindles • 4 + 4 horizontal drilling spindles (front/rear, TH1–TH4) • Independent milling unit with ER25 collet, max Ø 16 mm, 2.2 kW, 18,000 rpm • Front/rear panel edge sensors for precise sizing Iedpfxjw D Dt Ae Aaajtp • "Unica" version system reduces table gap from 240 mm to 30 mm for milling, allowing for the removal of small parts • Industrial PC, 160 GB drive, 2 GB RAM • 14" color screen with CD drive, keyboard, and mouse • USB, Ethernet, and serial ports • Operating system: Windows 7 Professional • CNC automation software: SW-FW ALBATROS • CAD software: TPA • Machine dimensions: approx. 2150 × 1330 × 1560 mm • Weight: approx. 1150 kg • Operating pressure: 6 bar • Feed speed: 25 m/min with material, 40 m/min without material • Power supply: 400 V, 50 Hz, 3-phase (TPA) • Tools not included in the price

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades Isdpfx Aju U Hgioaastp System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: new, ELMAG gearbox milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario With the compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines, precise workpiece machining is a pleasure in any position thanks to a swiveling machine head. The MFB 20 Vario was specially developed for small milling and drilling jobs. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, you can cover a wide range of sizes commonly used in model making and mechanical engineering. Digital displays for speed and drilling depth and infinitely variable speed control provide optimum support. Standard equipment - Quick-action drill chuck B16, 1 - 16 mm - Tapered arbor MK 2 / B 16, thread M10 - Tightening spindle M10 - Tool set - Operating instructions / CE ADVANTAGES Face milling - End milling - Drilling Stepless speed adjustment Digital speed display Emergency stop button Clockwise and counter-clockwise rotation Speed controller Precision micro feed Digital drilling depth display Quill fixing Operating lever with fixation Milling spindle with precision bearing Pull-in spindle for high safety Smooth-running, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale Zero-tension release Machine stand optionally available TECHNICAL DATA Drilling capacity in steel 20 mm Tapping capacity M14 Milling capacity face milling cutter 63 mm Milling capacity end mill 16 mm Spindle holder (turning spindle) MK 2 Speed range 1 50 - 1125 rpm Speed range 2 100 - 2250 rpm Itedpfxjt Ed Erj Aaaep Infinitely variable speed steps Quill stroke 50 mm T-slots, width 12 mm Milling head stroke 375 mm Spindle projection 184 mm Milling head swivel range ± 90 ° Quill distance table 0 - 375 mm Milling table surface 500x180 mm Table travel X x Y 280 x 175 mm Motor power 600 W Mains connection 230/50 V/Hz Cubature 500x180x375 mm Length x width 745 x 570 mm Height 935 mm Weight 103 kg

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator Iedpowbilxefx Aaaotp ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: new, MAIN FEATURES OF THE MACHINE: -Single-head drilling machine for drilling in the range of 0 - 90 ° -The inclination angle of the head is pneumatically adjustable -Possibility to set the side stops with an accuracy of 0.1 mm Itjdsh Dzr Aspfx Aaajp -Security handles allow the panels to be quickly positioned without adjustment -Patented pneumatic material clamps -A cast iron head that guarantees damping of all vibrations - MDF work table -Quick and accurate adjustment -Precise drilling -Quick change of drills with quick couplers -Spiral System- a device for quick adjustment of the drilling depth Technical data: Number of spindles: 29 Distance between first and last drill bit: 896 mm Distance between centers of individual spindles: 32 mm Number of pneumatic clamps: 2 Max workpiece size: 1142 x 3000 mm Max element thickness: 70 mm Working pressure: 6 - 7 bar Noise level: 76.1 dB Air consumption: 10 l / cycle Engine power: 1.5 kW Revolutions: 2800 rpm. Overall dimensions: Length: 1507 mm Width: 960 mm Height: 1265 mm

Condition: excellent (used), CNC Machining Centre for Routing, Drilling, and Edgebanding of Straight and Curved Panels 4-Axis Electrospindle – HSK F63 Automatic Tool Changer with 12 Positions Boring Unit Edgebanding Unit Edge Storage with 3 Positions Vacuum Pump Ijdpfxslpf E Uj Aaajtp

Condition: as good as new (ex-display), Year of construction: 2018, functionality: fully functional, SPECIFICATION “User-friendly” software interface Compliant with all Industry 4.0 requirements. Features an intuitive, icon-based interface, step-by-step data input, and a simulation program. Quick program selection and part execution, task lists, and a wide range of macros. Parametric programming and PC “Office Creator” license included. Optional direct import of popular 3D CAD file formats: *.stp, *.iges, *.obj, .skp and 2D formats: *.dxf, .dwg. Direct import of complete cabinet projects is also possible using simple decoding software (optional). Free software updates ensure maximum performance at all times! Multifunctionality Maximum working width: 1000 mm (with any spindle, across the entire panel surface). Maximum panel weight: 70 kg, suitable for heavy kitchen countertops and custom workpieces. Working cycle: through-feed or return-to-operator mode. Quick set-up All working operations in one cycle. The machine’s horizontal design makes loading workpieces easier for the operator. Fast program execution using a barcode scanner. Highest precisions Large and robust worktables ensure maximum stability of the workpiece, while the laser panel length sensor guarantees the highest drilling accuracy. Quality Sturdy construction, made of electrolytically welded steel, built to withstand heavy-duty use and demanding tasks. Well-dimensioned pneumatic clamp, capable of handling panels up to 70 kg, combined with double hold-down clamps. High-precision mechanics, 1 kW brushless motors, and roller guides. TECHNICAL DATA • Load capacity up to 70 kg, allowing processing of large and heavy panels, such as kitchen countertops • 11 vertical spindles: 6 horizontal spindles (front/rear, left/right), and grooving saw • Electrospindle 3.3 kW, 3000–24,000 rpm, right/left rotation Itedpfswn Hmajx Aaasp • ER25 DIN 6499 collet, max Ø 35 mm • Tool size: Ø 8–16 mm, max width 98 mm • Laser referencing controlled by software for automatic length error correction • Automatic air blowers for effective cleaning of the drilling head unit • Air cushion tables at front and rear (940 × 550 mm) • Automatic lubrication on Y and Z axes • Working dimensions: o X: min. 300 mm o Y: 75–1000 mm o Z: 8–60 mm • Industrial PC: 160 GB drive, 2 GB RAM, 17” color screen with keyboard and mouse • Weight: approx. 1450 kg • Axis feed speed: o X – 42 m/min o Y – 42 m/min o Z – 10 m/min • Installed power: 6.5 kW

Condition: new, ELMAG Geared pillar drill GBM 3/25 SNE - Set Fast geared drilling machines 900 / 650 W The more often carbide and stainless steel have to be machined, the more likely it should be a powerful geared drilling machine - also ideal for thread cutting. Thanks to a gear wheel combination made of steel and pressed material, the powerful GBM 3/25 TNE & SNE are particularly smooth-running. With a top speed of 2,900 rpm, you have an optimum cutting speed for small bores. The machines are equipped with clockwise and counter-clockwise rotation for thread cutting. GBM 3/25 TNE & SNE super set offer - Geared bench drill GBM 3/25 TNE or SNE - Machine vice 125 mm - Two clamping screws 14 mm - 9-piece drill cassette, 14.5 mm - 30 mm MK 2 / MK 3 Standard equipment - Quick-action drill chuck B 16, 1 - 16 mm - Taper arbor MK 3 / B 16 - Reducing sleeve MK 3 / MK 2 - Reducing sleeve MK 3 / MK 1 - Drive-out wedge - Operating instructions / CE Set equipment - Geared bench drill GBM 3/25 SNE - Machine vice 120 mm - Two clamping screws 14 mm - 9-piece drill cartridge, 14.5 mm - 30 mm MK 2 / MK 3 - Cutting oil spray ADVANTAGES Drilling capacity Ø 25 mm Cubature 290x250x580 mm Spindle projection 255 mm Powerful drive motor 400 V, 2-stage 900 / 650 W Smooth-running quality gearbox with heavy-duty helical gearing 8 speeds 105 - 2,900 rpm Drill spindle with precision bearing Isdot Edpwjpfx Aaastp Clockwise and counter-clockwise rotation Drill spindle protection cover Drilling depth scale and stop Tool ejector Precisely machined drill table with T-slots and coolant channel Rotatable and height-adjustable drill head Heavy-duty, ground steel column with toothed rack Emergency stop button / zero voltage release With 5 meter connection cable and 16 amp EURO CEE safety plug TECHNICAL DATA Drilling capacity in steel 25 mm Tapping capacity M16 Spindle holder (turning spindle) MK 3 Speed range 105 - 2900 rpm Speed steps 8 Quill stroke 120 mm Column diameter 100 mm T-slots, width 14 mm Drill head stroke 580 mm Drill table stroke 530 mm Spindle projection 255 mm Drill table rotatable ± 180 ° Drill head rotatable ± 180 ° Quill distance table 0 - 840 mm Drilling table surface 500x350 mm Motor power (2-stage) 900 / 650 W Mains connection 400/50 V/Hz Cubature 500x350x840 mm Base plate area (lxw) 400x500 mm Weight 180 kg

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. Iedpfx Aaswbilleaotp ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: new, ELMAG Geared pillar drill GBM 3/30 SNA - Set Iodpfst Edzaex Aaaotp Fast geared pillar drill 1,200 / 900 W The robust GBM 3/30 SNA pillar model is equipped with a powerful special gearbox, has a drilling capacity of 30 mm in steel and, with a quill spacing of 820 mm, offers plenty of space for holding tall workpieces. Helical gears made of steel and pressed material ensure high load capacity and smooth running. The GBM 3/30 SNA is therefore a perfect solution for medium-sized requirements in steel construction and metalworking stores, also for small batch processing. Standard equipment - Quick-action drill chuck B 16, 1 - 16 mm - Taper arbor MK 3 / B 16 - Reducing sleeve MK 3 / MK 2 - Reducing sleeve MK 3 / MK 1 - Drive-out wedge - Operating instructions / CE Set equipment - GBM 3/30 SNA geared pillar drill - Machine vice 120 or 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge, 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray ADVANTAGES Drilling capacity Ø 30 mm Automatic sleeve feed (0.1; 0.15; 0.22; 0.33 mm/rev) Cubature 500x350x870 mm Spindle projection 320 mm Powerful drive motor 400 V, 2-stage 1,200 / 900 W Smooth-running quality gearbox with heavy-duty helical gearing 8 speeds 75 - 3,010 rpm Drill spindle with precision bearing Clockwise and counter-clockwise rotation Drill spindle protection cover Drilling depth scale and stop Tool ejector Large, precise drill table with T-slots and coolant channel Heavy-duty, ground steel column with gear rack Rotatable and height-adjustable drill head Heavy-duty, ground steel column with toothed rack Emergency stop button / zero voltage release TECHNICAL DATA Drilling capacity in steel 30 mm Thread cutting capacity M22 Spindle holder (turning spindle) MK 3 Speed range 75 - 3010 rpm Speed steps 8 Quill stroke 150 mm Quill feed stages 4 Column diameter 105 mm T-slots, width 14 mm Drill head stroke 270 mm Drill table stroke 500 mm Spindle projection 320 mm Drill table rotatable ± 180 ° Drill head rotatable ± 180 ° Quill spacing table 50 - 820 mm Drilling table surface 500x350 mm Motor power (2-stage) 900 / 1200 W Mains connection 400/50 V/Hz Cubature 500x350x870 mm Base plate area (lxw) 400x670 mm Weight 210 kg

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Itjdjwbh Ifepfx Aaajp Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: new, ELMAG GBM 4/40 SGA TOUCH geared pillar drill Vario - infinitely variable speed adjustment The models in the GBM SGA TOUCH series offer the perfect option for workshops of all kinds, whether for maintenance purposes or production. These heavy-duty drills are equipped with a touchscreen operating display that helps the user to select the optimum machining parameters. The spindle speed can be continuously adjusted, while the quill feed has a robust manual gearbox. The height of the clamping table can be adjusted by motor, making it easier to handle heavy workpieces. These drilling machines are ideal for one-off and small batch production as well as for use in maintenance and in steel and hall construction. ADVANTAGES Control panel with touchscreen and additional functions Automatic feed with a robust manual gearbox Stepless speed adjustment Motorized table height adjustment Tiltable and rotatable work table TECHNICAL DATA Drilling capacity in steel 40 mm Thread cutting capacity M24 Spindle holder (turning spindle) MK 4 Speed range 60 - 2 600 rpm Infinitely variable speed steps Quill stroke 190 mm Quill feed stages 4 Column diameter 140 mm Quill feed 0.1/0.2/0.3/0.4 mm/rev T-slots, width 14 mm Drilling table stroke 540 mm Spindle projection 340 mm Drilling table swivels ± 50 ° Drilling table rotatable ± 50 ° Quill spacing table 595 mm Itsdpfst Ed A Rox Aaaop Drilling table surface 540x440 mm Motor power 2000 W Mains connection 400/50-60 V/Hz Cubature 880x640x2230 mm Height (total) 2230 mm Weight 565 kg

Condition: as good as new (ex-display), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A DEVICE) Alu Edition ✅ Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤Fronius FK 4000 water cooling system ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. can be adjusted from the torch) ➤Fronius trolley ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) ➤Gas hose ►►► Perfect for aluminum The Fronius TPS 2700 Alu Edition is particularly suitable for welding aluminum. Precise welding technology - user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the devices in? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. Itodswbitvjpfx Aaajp ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding system series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are familiar with these devices and do not sell anything we don't know anything about.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. Iodpfxevlwh Ds Aaastp 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: new, Optimum OPTIdrill DM 50V magnetic core drilling machine High-quality machine with infinitely variable speed control and maximum functionality. TECHNICAL DATA Dimensions and weights Length (product) approx. 250mm Width/depth (product) approx. 220mm Height (product) approx. 300 - 470mm Weight (net) approx. 11kg Drive power Input power 1.7kW Mounting Spindle holder fixed Drill holder Weldon 3/4 " Speed range Speed(s) at idle (clockwise rotation)100 - 810 min¯¹ Infinitely variable speed control Electrical data Itsdet Ifidepfx Aaasp Supply voltage 230V Mains frequency 50Hz Standards and approvals EMC class C2 Standard DIN EN 55011 Protection class IP 42 Magnet Magnet holding force 15.6kN Magnetic base length 166mm Magnetic base width 80mm Core drill Max. core drill diameter with manual feed 50mm Drilling depth max. core drilling with manual feed 50mm Solid drill Drill diameter max. solid drill directly mounted 13mm SCOPE OF DELIVERY Carrying case Operating tool Safety belt Quick-change chuck EQUIPMENT Vario drive ✔ Manual quill feed

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Magnetic Chip Separator Hydraulic System Chiller Specifications: Iodpfortrztex Aaajtp Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 365 A, welding current at 100% duty cycle: 283 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC DP400 30-400 AMP 50% ED 400A 60% ED 365A 100% ED 283A 400 Volt Water-cooled Pulse Synergic 2/4 Step 4 Roller drive Pre gas Post gas Start current End current Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, & tested Production date: 2007 Including PRO5000 Welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Isdpsxxlclefx Aaastp Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2003, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, FANUC ROBODRILL T21i DL CNC DRILL-TAP MACHINE MAKE FANUC, MADE IN JAPAN MODEL ROBODRILL T21i DL CONTROL FANUC 16I-MB YEAR 2003 TABLE SIZE 850.0 x 410.0 mm TRAVERSES X Y Z 700.0 x 400.0 x 330.0 mm SPINDLE SPEED 10 – 20,000 RPM ATC 21 STATIONS SPINDLE TRAPER ISO 30 RAPID TRAVERSE 54m/min DISTANCE BETWEEN SPINDLE NOSE TO TABLE 150.0 mm – 480.0 mm CUTTING FEEDRATE 1 – 30,000mm/min TOOL CHANGE TIME 1.6 sec MAX TOOL DIA 80.0 mm Iodpfotnh Aljx Aaaetp MAX TOOL LENGTH 200.0 mm MAX TOLL WEIGHT 2 kgs POWER RATING 5.5 Kw PLUS SWARF TRAY COOLANT SYSTEM SET OF TOOLING SET OF MANUALS

Condition: used, Year of construction: 1981, drill diameter 32 mm drilling length 0 mm Universal Drill Bit Grinder Ijdpfx Aet Hwn Aeaajtp lots of accessories

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Itedpsxu A N Ujfx Aaaop Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: used, Year of construction: 1994, Some typical specifications for the TOS W75 machine are: Spindle diameter: approx. 75 mm. Spindle speeds: e.g. 18-1800 rpm. X-axis: approx. 1,250 mm. Y-axis: approx. 900 mm. Z-axis or W-axis: various values, e.g. 560 mm. Itjdpfxexw Uclo Aaaop Table size: approx. 950 × 950 mm. Weight: approx. 10,000 kg All information provided without guarantee.