Angle drill buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Angle drill, hand drill, corner drills -for working in hard to reach places Rated power 650 Watt Drilling adapter MK1 -Max drilling performance performance 15 mm Connection 230 Volt Weight 4 kg Hihuoqkso more
1
Angle of drilling plant used (blue) Floor area approx. 1500 mm x 500 mm Height approx. 1250 mm, width 1500 mm with holes and thread M20 in the hole distance of 80 mm t = 50 mm Clamping device for machine tools W2qqgwnv7 more
6
Adjustable angle Elbe ear unit with SK40 recording for SCM 2qsffi CNC-angle unit for drilling Drilling adapter M10 and additional adapter for normal 10 mm Schaftbohrer Unit can be rotated through 360 degrees C axis Adjustment range of - 10 to 90 degrees Ratio 1:1 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please... more
2

Angle drill FEIN ASzx 648

More Fein Aszx 648
Wiesbaden, GermanyGermany dealership location
6534 km
used
Bore Ø up to: 16 mm Spindle retainer: MK 1 1 spindle speed Electr. Connection: 220 V, 740 W Gvbh2qa33 more
3
Angle drill, hand drill, corner drills -for working in hard to reach places Rated power 650 Watt Qli29gygp Drilling adapter MK1 -Max drilling performance performance 15 mm Connection 230 Volt Weight 4 kg more
2

clamping angle for borers unbekannt

Borken-Burlo, GermanyGermany dealership location
6360 km
used
different angle with T-slots or holes P37gkcei Single delivery possible more
6
Angle drilling head with SK40 recording for SCM CNC angle unit for the recording of 4 drills 4 x stem retainer M10 Spindle distance 32 mm Unit can be rotated through 360 degrees C axis Ratio 1:1 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. 8mutfbb30 Includes instructions and detail drawing Please the PDF file with our terms and conditions and order form. ... more
4
Angle drill, hand drill, corner drills -for working in hard to reach places Nominal consumption 360 Watts Qli3sjdor Drilling adapter MK1 -Max drilling performance performance 15 mm Connection 230 Volt Weight 7.5 kg more
6
Angle drilling head with SK40 recording for SCM CNC-angle unit to record 3 drills 3 x stem retainer M10 Spindle distance 22 mm Unit can be rotated through 360 degrees C axis 8muy0hmzn Ratio 1:1 Speed Max 6000 RPM The unit comes from a bankruptcy and has until recently on a SCM Routronic from BJ. 1996. Can be tried by us, because we have an other intake on our CNC. Includes instructions and detail drawing Please the PDF file with our terms and conditions and order form. The machine... more
3
Angle drill, hand drill, corner drills -for working in hard to reach places Rated power of 500 Watts Drilling adapter MK1 -Max drilling performance performance 15 mm Qlj0vp2vw Connection 230 Volt Weight 4.5 kg more


angle drill
daily

New machines via email!

Stay updated!
3
Angle drill, hand drill, corner drills 3qr2pzpb -for working in hard to reach places Screw diameter -Screws Ø, max.: 6 mm -Drill spindle thread: 12. 7 mm (1/2 ") -Voltage: 7.2 V Weight incl. battery, approx.: 1.20 kg -No load speed: 0-750 min-1 -Drilling diameter: -Drill Ø aluminum, Max: 10 mm -Drill Ø wood, Max: 15 mm -Drill Ø steel, Max: 10 mm Weight 4 kg more
1
Elect./Voltage: 208/230/440/480, 60 Cy, 3 Ph Bbu2y2rlt0 VERSAMAX FHD56C CNC EDM Drill (Hole Popper) -- Travel 23.6” x 19.7” x 17.7”. -- W-Axis travel 11.5”. -- Maximum workpiece dimensions 31.5” x 29.5”. -- Maximum workpiece weight 2,866 Lbs. -- Electrode size range 0.3mm – 3.0mm (0.0118" - 0.1181"). -- Approximate dimensions 6' x 5'6". -- Approximate weight 4,500 [...] with: -- 30 Amp power supply. -- Fully submerged operation. -- Integrate... more
6
Technical data BohrleistungL = 500 mm Fuoj8isp Drilling capacity in steel Ø50 mm ... more
3

Drill with a crosscut saw Pade EV 25

Dörpen, GermanyGermany
6349 km
1996
reconditioned (used)
used automatic drill PADE with crosscut saw tilt of the aggregates - 10° up to + 45 ° Performance of the saw motor 2,2 kW Saw blade diameter 400 mm The drill motor 2,2 kW Vshczi Drill head swivel adjustment through 360 ° min and Max spindle distances from middle spindle 17-100 mm Max drilling depth (can be adjusted) 70 mm Rotary speed of the saw blade and the drill approximately 3000 rpm. Net weight 500 kg Operating dimensions 1200 x 1000 x 1300 mm more
5
Diamond core drill, drill -3 x drill Due7tu -Max drilling power ø 60 mm Max drilling depth 400 mm Drive 1050 W -Drehzahlen 1500/3000 U/min Core bit ø 18/24/29 mm -sold Weight 70 kg more
2

Gang Drilling Machine IXION BR 15 4

Monheim, GermanyGermany dealership location
6403 km
1991
used
number of spindles 4 bore capacity in steel (diameter) 15 mm bore stroke mm Naett spindle turning speed range 240 - 3.600 U/min weight of the machine ca. 1,2 t dimensions of the machine ca. 1,2 x 0,8 x 1,5 m inkl. operation manual more
5
work piece width:620 mm workpiece height:450 mm drill diameter:10 - 40 mm Ncv9b The Kaltenbach KBS 620 APS603 saw drill line from 1999 is overhauled at Nenok and is in good condition before delivery. The combination consists of the Kaltenbach band saw KBS 620 DG and an APS 603 drill line. The band saw is semi-automatic and equipped with diagonal cutting +/- and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variable in a ran... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu7rf9s7x YOSHIDA YR5-115 45” x 12” Radial DrillSpecifications -- Maximum distance, column surface to spindle end 45-1/4” -- Minimum distance, column surface to spindle end 11-1/16” -- Maximum distance, base top to spindle end 50-13/16” -- Minimum distance, base top to spindle end 14-15/16” -- Drilling capacity in steel 2” -- Tapping capacity in steel 1-7/8&rd... more
6

Drilling machines Giovanni Breda R 1880 MP

Babberich, NetherlandsNetherlands dealership location
6320 km
1980
used
Technical data Bb0pm0xh0r Ausladung1900 mm Bohrleistung1600 mm Drilling capacity... more
3

Pillar Drilling Machine WEBO Gradua 40

Bremen, GermanyGermany dealership location
6445 km
1961
used
bore capacity in steel (diameter):40 mm throat:360 mm bore stroke:240 mm turning speeds:56- 1250 U/min feed range - spindle:0,03- 0,4 mm/U spindle cone MT: B7aarkpj3 feed steps:8 total power requirement:2,5 kW weight of the machine ca.:0,6 t dimensions of the machine ca.:1,1 x 0,8 x 2,9 m more
5
Pressure regulator Zwischenplate Type NAVW-3/8-2-ISO 152790 Price per piece -20 x vorhanden Hhoa3o2eq Weight 0.6 kg more
5

Pillar Drilling Machine ALZMETALL AB 50 S

Bünde, GermanyGermany dealership location
6460 km
1980
used
bore capacity in steel (diameter) 50 / 65 mm throat 385 mm bore stroke 240 mm Gugbsc spindle taper MK 5 table-size 730 x 540 mm column diameter 220 mm spindle turning speed - stepless 40 - 800 U/min feeds 0,10 - 0,40 mm/U Drive 4 kW weight of the machine ca. 1100 kg dimensions of the machine ca. 1,2 x 0,9 x 2,5 m Condition: ready for operation Condition: very good Electric 380 Volt Cooling equipment Very well preserved HEAVY column drill MK5 with electromagnetic feeding indentation... more
5
work piece width:1000 mm 93g8bhia8 workpiece height:300 mm bore diameter:40 mm total power requirement:51 kW workpiece length:18000 mm more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more
6

Drilling machines IXION Auerbach Germany TL 1001

Babberich, NetherlandsNetherlands dealership location
6320 km
1998
used
Technical data Bohrleistung0 - 25 mm Thread cutter 20 MM Spindle retainer MkSK 40... more
4

Radial Drilling Machine WEBO BR 50/63-H 2000

Leipzig, GermanyGermany dealership location
6734 km
1966
used
bore capacity in steel (diameter): 63 mm arm length:: 2000 workpiece height max.: 1270 mm spindle taper MT: MK 5 drill depth: 400 (Hub) mm quill stroke: 400 mm feed: 0,05 - 0,32 m/min revolutions per minute spindle:: 14 - 1000 U/min column turnable: 360 ° electrics - voltage/frequency: 380/50 V/Hz base plate: 1900 x 950 mm total power requirement: 13 kW weight of the machine ca.: 7,9 t space requirements approx. LxWxH: 3,9 x 1,5 x 3,4 m operating range: Vqujai distance from middle of spindle ... more
4
To drill, drill, drill Two Schneider -- Different different diameter usable length recording MK2 / Mk3 Qlsdasz7n Type HSS Number 21 pieces -sold Weight 12 kg more
6
bore capacity in steel (diameter) 40/50 mm arm length 635 - 1230 mm workpiece height max. 707 mm spindle taper MK 4 threading M 28 / M 32 spindle stroke 200 mm table-size 1300 x 710 mm feeds 9, von 0,08-1,25 mm/U spindle turning speed range 12, von 56-1120 U/min distance table-spindle nose min./max. 157 / 707 mm 388ieroka Drive 4 / 3,4 kW Machine height max. 2765 mm weight of the machine ca. 2,5 t dimensions of the machine ca. 2,1 x 1,5 x 2,76/3,3 m Condition: ready for operation Condition... more
5
working area: mm Punching capacity:600 kN punch diameter: biggest flat bar:200 x 15 mm Bb9hjtaxqh Smallest flat bar:40 x 5 mm biggest angle:130 x 15 / 130 x 200 x 15 mm smallest angle:40 x 5 mm length max.:12 m mm Mubea punch and shear line for punching and shearing of angle and flat material. The punch and shear system consists of a material feed system with a clamp measuring system for length measurement. The Mubea angle punching and shearing line has a hydraulic shear unit, a punching unit... more
1
Elect./Voltage: Bbu7rpqyry UNISIG USK75-2000 CNC Deep Hole Drilling Machine -- Minimum drilling capacity in solid blank: 0.093" -- Maximum drilling capacity in solid blank: 3" -- Maximum drilling capacity counter bore or trepan: 4.3" -- Maximum drilling depth: 80" -- Table size: 40" x 66" -- Travel of counter rotation spindle: 40" -- Max distance drill face to counter rotation spindle: 84" -- Table load capacity: 11,000 Lbs. -- Spindle drive: 50 HP -- Approximate dimensio... more
6

Drilling machines MAS Kovosvit VO 50 / 1600

Babberich, NetherlandsNetherlands dealership location
6320 km
2006
used
Technical data Ausladung1600 mm Bohrleistung50 / 60 mm Drilling capacity in steel... more
5
bore capacity in steel (diameter): 15 mm throat: 300 mm bore stroke: 114 mm spindle turning speed - continuous: 200-3000 U/min spindle taper MT: MK2 Bndv9dpm drill depth: 114 mm boring spindle diameter: 300 mm table-size: 315 x 220 mm distance - drill spindle & boring table-adjustable: min/max: 50/540 mm feed: manuell m/min total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg space requirements of the machine approx.: B:0,5 x T:0,9 x H:1,9 m boring table swivelling 60° machine... more
4
Angled screw coupling, hydraulic fitting Size 28 L -4 x packages -5 pieces per package Price per package Cu9g8xou Weight 3 kg more
5
bore capacity in steel (diameter) 20 / 25 mm throat 285 mm bore stroke 140 mm spindle taper MT 2 MK column diameter 105 mm spindle turning speed - stepless 60-1400 U/min Drive 0,55 / 1 kW distance spindle/base plate 245 - 675 mm Kkvnk8tr base plate 400 x 425 mm distance between table/spindle 145 - 465 mm weight of the machine ca. 300 kg range L-W-H 1 x 0,8 x 2 m Electric 380 Volt Base intermediate table 430 x 380 mm Stepless turning speed regulation Machine dealer with own stock of 25... more
5

Radial Drilling Machine Kolb KR 55

Köln, GermanyGermany dealership location
6416 km
1991
used
bore capacity in steel (diameter):55 mm arm length:1600 mm workpiece height max.:1600 mm total power requirement:12,8 kW weight of the machine ca.:4,5 t dimensions of the machine ca.:2600 x 3000 x 1000 mm P37xtn The radial drilling machine Kolb KR55 is suitable for drilling flat steel and profiles in large dimensions in steel construction. The Kolb KR 55 has a drill spindle holder MK 5 and a drilling spindle stroke of 390 mm. The spindle speeds are infinitely variable in 20 steps between 0.056... more
1

CNC DRILL BROTHER TC-S2C-O

North Carolina, United StatesUnited States dealership location
518 km
2008
used
Elect./Voltage: 220 V, 3 Ph. Wti0o BROTHER TC-S2C-O Drill Tap -- Y axis 15.7”. -- Z axis 11.8”. -- Table size 31.5" x 12.6". -- Max table load 551 lbs. -- Spindle nose to table top: 7.1" - 18.9". -- Spindle speed 16,000 RPM. -- Spindle taper BT30. -- Spindle motor 10 hp. -- Tool changer 21 side mount ATC. -- Rapid traverse rate: 1969 IPM. -- Cutting feed rate: 394 / 787 IPM. -- Max tool length 9.8". -- Tool change time 0.9 sec. -- Chip-to-chip time 1.7 sec. -- Max t... more
6

Drilling machines IXION Germany TL 600 SVA 900

Babberich, NetherlandsNetherlands dealership location
6320 km
1987
used
Technical data Bohrleistung2 - 18 mm Drilling capacity in steel Ø18 mm Drilling c... more
6
workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm workpiece weight: 750 kg deburring device max.: d=40 mm traversing speed: 80 m/min work height max.: 1050 mm positioning accuracy: +/- 0,5 mm opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm feed length: max. 150 mm rapid traverse: 8 m... more
5
Angle flange, flange, cable duct, cable protection Nominal width 48 mm -Schutart IP66 -universell can be used Packing unit 10 pieces Uv73qmfsu Price unit -46 x bags a 10 piece available Dimensions weight 1 kg / piece more
8
Drilling capacity -35mm Spindle taper MT3 Bcdavekxto Drilling depth 170mm (aut.quill feed) Spindle speeds inf.variable 40-710rpm Table size 450x450mm With integrated vice MARCELS MASCHINEN CH more
5

Drilling line PEDDINGHAUS TDK1000 / 9

Köln, GermanyGermany dealership location
6416 km
1994
used
size of profile - max.:1000 mm Number of drilling agregates:9 Stk. bore diameter:8 - 40 mm Gvlmdc total power requirement:40 kW weight of the machine ca.:9 t Peddinghaus beam drill line for beams sizes of 1000 mm in height inner air cooling for drill spindles · max. beam height: 400 mm · operatin voltage: 380 V / 50 Hz · control voltage: 24V · 9 drill spindles (3 spindles per axis) · marking unit Signomat 05 · CNC-control Siemens · without transport system more
1

CNC DRILL BROTHER TC-228

North Carolina, United StatesUnited States dealership location
518 km
1995
used
Elect./Voltage: Bbu7zraqot BROTHER TC-228 Drilling & Tapping Center -- Table 23.6” x 11.8”. -- X travel 16.5”. -- Y travel 11.8”. -- Z travel 9.8”. -- Rapid traverse (x & y) 1417 ipm. -- Rapid traverse (z) 1181 ipm. -- Tool changer 10. -- Tool change time 1.2 seconds. -- Spindle speed 10,000 rpm. -- Tapping speed 6,000 rpm. -- Spindle motor 5 hp. -- Spindle taper #[...] with: -- Brother CNC Control. more
3

Radial Drilling Machine WMW BR 40 x 1250/1

Bühl, GermanyGermany dealership location
6593 km
1969
used
bore capacity in steel (diameter) 40 mm E87ho07 thread dia. 36 mm inch 1 1/2 Zoll column distance -mid boreslide 300 - 1250 mm distance spindle/base plate 375 - 1375 mm swivel range of the arm 360 ° base plate surface area 1370 x 900 mm spindle taper MT 5 spindle stroke - max. 355 mm spindle speed: 20 - 1200 U/min. spindle feeds: 0,063 - 0,63 mm/U total power requirement 4,1 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,05 x 0,93 x 3,20 m acc.: coolant more
4
bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: [...] U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m H2joz2l equipped: toothed drill chuck up to 16mm ... more
5
Drill bushes Qlssg8y2a -10 x type Z10W/36/15 -10 x type Z10W/36/30 -9 x type Z10W/36/10 -9 x type Z10W/36/9 -10 x type Z10W/36/14 Complete price Weight 4 kg more
8

Bench drill FEHLMANN P18S

SchweizSwitzerland
6694 km
ready for operation (used)
Drilling capacity -18mm Throat 225mm Crfcyfdk Spindle Speeds inf. variable 132-4500 rpm Table size 430x340mm With tapping device Cross table 425x200mm MARCELS MASCHINEN CH more
5
work piece width:1000 mm Bafx83voao workpiece height:420 mm bore diameter:8 - 40 mm weight of the machine ca.:18 t dimensions of the machine ca.:B x L x H 6,2 x 6,5 x 2,9 m The sawdrill line consists of a drilling system from Peddinghaus - BDL 1000/9 - and a band saw from Meba - 1020 DGP. It is used but in good condition. The band saw is from the year 2005, the drill line from 2007. Technical data Peddinghaus drilling rig BDL 1000/9 The maximum working width is 1000 mm, the maximum working h... more
1
Elect./Voltage: 2q7dce GIDDINGS & LEWIS 956 Radial Drill Specifications -- Capacity 8' arm 19" column -- (54) spindle speeds 7.9 - 1000 rpm -- #6 mt spindle taper -- Rapid traverse on head -- 20" spindle travel -- 4 3/4" spindle diameter -- (27) feeds .312 - 5 ipr -- 30 hp main motor -- Overall dimensions: 128" h x 12' 8" l x 4' 6" w more
2
bore capacity in steel (diameter) 25 mm arm length 300 / 800 mm workpiece height max. 1000 mm distance table - lower edge spindle 125 / 1000 mm spindle turning speed range 63 - 1600 U/min feeds 0,125 - 0,2 - 0,315 mm/U max. torque on the spindle max. 90 Nm column diameter 180 mm spindle taper MT 3 quill stroke 250 mm base plate surface area 800 x 630 mm crossrail adjustment vertical 625 mm bore head horizontal movement 500 mm boring head swiweling right/left 90 ° total power requirement 1,5 kW ... more
4
bore capacity in steel (diameter): 18 mm throat: 270 mm bore stroke: 150 mm column diameter: 125 mm clamping surface area: mm table-size: 520x440 mm Ywdfegpe spindle taper MT: 3 distance spindle /table: 450 mm range of revolution per miute: 500-5600/8 Step U/min feed: per Hand / manual m/min machine weight ab.: 254 kg total power requirement: 1,4 kW dimension machine [...]: 1000 x 550 x 1300 mm Machine is equipped with drill chuck. only clockwise rotation spindle in height adjustable spindle ro... more


angle drill
daily

New machines via email!

Stay updated!

to

to

Edit search
ANGLE DRILL
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close