Used Hotmelt for sale (172)

Condition: excellent (used), NORDSON PROBLUE 7 HOTMELT GLUE UNIT IN EXCELLENT CONDITION Redsrtnv Dspfx Abmebt

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, We are selling several hotmelt stations from Huangsang. This system is almost as good as new and was only used briefly for a project. Data: Model: HS808A Capacity: 10 l Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Year of manufacture April 2020 _____ Model: HS808A Capacity: 10 l Operating voltage: 220 V Power: 2300 W Temperature: 200 °C Weight: 61 kg Year of manufacture September 2020 _____ Rbjdpfsrzauzox Abmet Model: HS2199 Capacity: 10 l Operating voltage: 220 V Power: approx. 4000 W Temperature: 200 °C Weight: approx. 125 kg Year of manufacture 2020 More detailed information on request. Please contact us!

Condition: new, EVA Hotmelt Without Filler 280.30/31 Application Examples: Edge Banding For bonding thermoplastic edge bands (such as ABS, PP, PVC), resin-impregnated decorative paper, veneer edge bands (with or without nonwoven backing), and solid wood edges. As a general rule, the bonding properties and the substrates’ surfaces to be glued (including back-side primers or other surface treatments) must be checked on an application-specific basis prior to use. Processing Instructions: Automatic feed systems can be used for processing the adhesive granulate. The ambient temperature should not exceed 30°C. Depending on formulation, different types of hotmelt adhesives may be incompatible with each other. Therefore, we recommend thoroughly cleaning application equipment when changing products. Further information is available upon request. Processing characteristics may vary depending on the application technology used and variations in feed speed, which can affect the bonding process. Customer trials are required! Typical Technical Data: Processing temperature [°C]: 180 – 200 Feed rate [m/min]: 10 – 40 Rbodex Sqnvjpfx Abmjt Appearance: Terminal digit 0 = yellow opaque Terminal digit 1 = white Density at 20°C [g/cm³]: approx. 1.03 ± 0.03 Softening range [°C]: approx. 90 ± 5 (Kofler heating bench) Viscosity at 190°C [mPas]: approx. 66,000 ± 10,000 Heat resistance [°C]: approx. 80 ± 5 Open time at 190°C [s]*: approx. 6 ± 2 Setting time: not applicable * measured on a 200 µm film Technical data determined according to Jowat test methods

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Good condition Rsdsxfwvqspfx Abmebt

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure Rbodpfx Abowigbmomet 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: used, Year of construction: 2020, Hotmelt spine glue unit Redpfx Ajuliq Tobmebt Muller Martini Year: Suitable for connection with a Muller Martini Vareo .

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Rodpfewuqfysx Abmebt Complete with air solenoids, modules, cord sets & dispensing guns Mounting brackets included In excellent working condition

Condition: used, Nordson Problue 7 Hot Melt Pump Redowq S Eyopfx Abmsbt Model Problue 7

Condition: used, Nordson Problue Hot Melt Pump Redpfx Abswq Suuemjbt Model - Problue 10 Facility to connect up to 6 hoses 10kg Tank Capacity

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Rsdpfx Abjwq Sv Ejmobt Glue bead dispensing tub / storage container Mounted on a stainless steel frame

Condition: excellent (used), Year of construction: 1984, For sale: professional Robatech RoBa 30 adhesive melter, Swiss-made (Robatech AG CH-5630 Muri). The unit is fully functional, complete, and ready for operation. Ideal for packaging lines, folder-gluer machines, cartoners, and equipment requiring precise hotmelt adhesive application. Technical specifications: * Model: RoBa 30 * Year of manufacture: 1984 * Output: 900 g/min * Max hydraulic pressure: 40 bar * Max air pressure: 5 bar Rodpfxeum Hufo Abmjbt * Max operating temperature: 200°C * Power supply: 240 V * Power consumption: 10 A * Pump ratio: 1:8 * Nameplate legible, pressure gauge operational Condition: * device in good technical condition * complete, with no missing parts * Swiss quality – very robust construction

Condition: used, Year of construction: 2007, Used Kosme Monocombi 2T Hot Melt Case Packing Monoblock This second hand Kosme casepacking monoblock is designed for reliable bottle grouping and carton closing within a compact industrial packaging footprint. Built to support demanding beverage production environments and other bottling applications, it handles bottle collation into 6-bottle cartons and applies hot melt closure in a single integrated unit. Its monoblock architecture reduces footprint, simplifies integration on a used bottling line, and streamlines operation and maintenance. Manufactured by Kosme, a recognized brand in bottling and packaging machinery, this model features an additional bottle centering device tailored for Authentique bottle handling, improving infeed stability and pack quality. Suited to both PET and glass bottles, it aligns well with beverage production requirements where consistent case presentation, secure hot melt sealing, and repeatable format results are essential. With a practical power rating of 8 kW and manuals available, the machine supports efficient commissioning and routine upkeep for continued performance in industrial packaging operations. Technical Specifications & Performance Data Manufacturer: Kosme Rbedpfx Abexywb Aomst Model: Monocombi 2T Year of manufacture: 2007 Machine category: Casepacking Monoblock Pack format: 6-bottle cartons Closure system: Hot melt Power: 8 kW Container handling: PET and Glass bottles Included device: Additional bottle centering for Authentique bottle Documentation: Operating and maintenance manuals available Advanced Automation & Control Systems The monoblock layout integrates bottle collation, case loading, and hot melt closing for streamlined automation. Operator-friendly controls support quick setup and routine adjustments. The hot melt gluing system ensures consistent sealing quality with minimal operator intervention, improving uptime and minimizing rework in continuous production. Production Line Integration Capabilities Engineered for straightforward integration into a used bottling line or as a standalone casepacking station, the machine interfaces with upstream conveyors and downstream palletizing solutions. Its compact monoblock footprint helps optimize floor space while maintaining access for changeovers and maintenance. The 6-bottle carton configuration fits common beverage logistics standards and can be combined with typical secondary packaging flows in beverage production. Machine Condition & Maintenance History Offered as second hand industrial packaging equipment, this machine comes with operating and maintenance manuals, facilitating proper setup and care. The presence of manuals supports efficient maintenance routines and helps sustain long-term reliability on the production floor. Operational Performance & Versatility Designed to handle both PET and glass bottles, the machine is suitable for beverage plants looking for dependable case formation and hot melt sealing.

Condition: used, Year of construction: 2003, operating hours: 5,000 h, Used Kosme Labeling Machine Extra Hot Melt 8T S1 E1 2003 Dimensions: 2.5m x 1.5m Power supply is 400V. Power capacity is 11kW. Rsdpfx Abovgurijmjbt Air consumption is 60l/min. Nominal pressure 5-6bar. Has run 1.5L, 0.5L, and 0.33L PET Bottles, and includes all the relevant parts such as the base plates etc. for these sizes. The label size of the 1.5L Bottle was 82mm x 278mm. The label size of the 0.33L Bottle was 40mm x 203mm Output capacity: 7,000 bph Working hours: approximately 5,000 hrs.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 80-91, These carton erector and box closer machines has been manufactured to handle and transfer of packing products in order to avoid their damage. The machines have been thought to work with the most habitual boxes of different sizes. Rjdsry T Acepfx Abmobt

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: H/32059, feed rate X-axis: 22 m/min, workpiece height (max.): 50 mm, TECHNICAL DETAILS Panel height: 10 mm to 50 mm Solid wood: 12 mm PVC/ABS: 0.4 mm to 3 mm Max. feed speed: 22 m/min Min. panel length: 150 mm Min. panel width: 70 mm MACHINE DETAILS Rectifier group motors: 1.5 kW (2 motors) EQUIPMENT Touchscreen control for adjusting working units Panel support guide Side roller conveyor with idler wheels for panel support Anti-adhesive unit Roll holder plate COMBIMELT glue unit for hotmelt adhesive with automatic VarioMelt dosing and pre-melter Patented edge pressing unit with segmented pads Trimming unit with 2 motors Rbedpfxsydibws Abmet Cleaning unit with 2 motors Rounding unit Edge scraper unit Working height adjustable electronically via C.N. Powered rubberized conveyor with top pressure

Condition: used, machine/vehicle number: 008093, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 12 m/min Maximum panel thickness: 60 mm Rjdpfox A Hgasx Abmjbt Operating Units: 6 nr

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Redpfx Aeqy Em Tjbmebt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Max. machinable height: 120 mm Gluing System: EVA Hotmelt Rjdpfx Absu Evi Romebt

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gluing System: EVA Hotmelt Rodpsu Eviqjfx Abmjbt

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Rsdpfx Aow Idc Rsbmobt Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, machine/vehicle number: 008109, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 12 mm Rbjdpfxsw Idc Ds Abmst Operating Units: 9 nr

Condition: used, Year of construction: 2017, Overview This PET filling line was manufactured between 1998 - 2017 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 10.500 - 18.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 10.500 - 18.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Kosme | 2017 Elevator preform | Kosme | 2017 Rinsing/Filling/Capping | Tekal | 50/70/12 | 1998 Inspection machine | Heuft | 2010 Date coder | Printer Laser | 2017 Labelling machine | Sidel | 2017 Packing machine | SMI | 2002 Palletizer | SIPA | 2011 Pallet stretcher | SIPA | 2011 Mixing- and carbonating unit | Adue | 2013 Beverage analyzer | Maselli UR21 | 2009 Conveyors for empty PET bottles | Silga | 2017 Conveyors for filled PET bottles | Silga | 1998                                                                                             Conveyors for trays | Silga | 1998 Rbedpfx Absx Rrdcjmst

Condition: used, Year of construction: 2010, Overview This PET filling line was manufactured between 1996 - 2019 by several European manufacturer. The line is designed for carbonated beverages such as lemonades and also suitable for water with or without CO₂. With an output capacity of 14.000 bph, it offers a complete solution from bottle blowing to palletizing. This equipment is in good condition and still fully operational.   Technical Data Capacity: 14.000 bph Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: good technical condition, still in production Scope of Delivery Blow moulding machine | Sidel | SBO10 | 2010 Elevator preform | Sidel | 2010                                                                                                                    Air conveyors | Sidel-Alsim | 1999 Rinsing/Filling/Capping | Sidel-Alsim | 48/60/10 | 1999                                                                                           Mixer | Sidel-Alsim | 1999 Bottle dryer | ACI | 2015 Labelling machine | Krones Contiroll | 2004 Shrink wrapping machine | Acmi | 2019 Handle applictaor | SMI-Pack | 2002 Conveyors for bottles and trays | Sidel-Alsim | 1999 Palletizer | Alsim | 1996                                                                                                                                                Pallet wrapper | PM Pragometal #1 | 2009 Pallet wrapper | PM Pragometal #2 | 2009 Rsdpfx Aoyb Tuiebmsbt

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Rsdpfjwh U Avsx Abmsbt

Condition: used, Year of construction: 2010, Overview The components of this PET filling line were manufactured between 1997 - 2014 by different European manufacturers. The line is designed for carbonated beverages such as lemonades and also suitable for water with CO₂. With an output capacity of 33.000 bph, it offers a complete solution from bottle blowing to palletizing. The equipment becomes available as the seller replaced it by more modern machines. Technical Data Capacity: 33.000 bph at 1,5l Format: 1,5l Filling product: carbonated water and soft drinks  OPP wrap-around label from a reel with hotmelt and glue labelling station Packaging formats: shrink wrapping without tray Pallet: Euro pallet (1.200 x 800 mm)  condition: regularly maintained, stopped   Preform kipper | Sidel | EBHS 2050 | 2010 Preform feeding system | Sidel | EBHS 2050 | 2010 Blow mold chiller | Trane | RTAC 185 | 2003 Blow molding machine | Sidel | SBO 20 Series 3 Universal | 2010 Air conveyor | Ling | – | 1996 / 2001 / 2003 Mixer | Krones | MS 45/2 | 1997 Filler | Krones | VKS 140 | 1996 Cap conveyor | Gassner | – | 1996 Capper | ALCOA | Kupi 30/1080 | 1996 Camera inspection system | Intravis | Crown Watcher SN 1729 / V10.115-5299 | – Bottle inspection | Krones | Checkmat FM-G | 1996 Bottle inspection | Krones | Checkmat E | 2003 Bottle conveyor | Krones | – | 1996 / 2003 Bottle drying system | ACI | – | 2009 Labelling machine | Krones | HS 720-18 | 2009 Date coding (bottles) | Videojet | Excel 170i Ultra High Speed | 1996 Empty bottle inspection | Heuft | Squeezer | 2009 Shrink packer | Hartness | Multi Packer / Film | 2009 Multipack conveyor | Krones | – | 1996 / 2001 / 2003 Handle applicator | Project | Progrip S70 | 2001 Palletizer | Ocme | Pegasus F450 | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Stretch Wrapper | Robopac | Genesis | 2014 Rodpsya Hn Hjfx Abmobt