Used Hot Stamp for sale (14,762)

Condition: like new (used), Year of construction: 2022, Hot stamping plate dimension(W*L): 330mm* 260mm Die cutting plate dimension(W*L): 330mm* 350mm Max.unwind roll diameter& Max.rewind roll diameter: 650mm(can load 2000 meters material) Max.speed: 23000 times/h Applicable blade height: 7mm-23mm Applicable hot stamping tooling height: 1.5-4mm Die cutting accuracy: 0.1mm Prsdpfx Aep H Swdegzof Hot stamping accuracy: 0.2mm Dimensions: 5300mmx1300mmx1700mm Voltage/current: 3 phase 380V/32A Main motor power :7.5KW Gross power: 15KW Total weight: About 4000KG

Condition: good (used), TWQ-720RD Automatic Hot Foil Stamping Machine This machine is brand new. Very fast setup. Embossing and hot foil stamping capabilities, with two independent foil feeds. Servomotor control for fast and precise operation. Technical specifications: Maximum sheet size: 720x600mm Min. sheet size: 150x120mm Material weight: 120-2000g/m² Maximum throughput: 1200 sheets/h Power consumption: 13kW + compressed air Weight: 2000kg Foil feed: 1-550mm Operating temperature: 50-150°C Power supply: 380V Approximate machine dimensions: 270x160x220cm Prsdpex N D Ttefx Agzef Equipment: – Control panel with touchscreen PLC – Two independent foil feeds, controlled by stepper motors – Sectional heating plate – Built-in compressor

Condition: good (used), Heidelberg GT 32×46 Hot Stamping Machine Reviewed and ready for production. The machine is ready for hot stamping and die cutting. Machine format: 32x46cm Press force: 60t Prjdpjx N D Tgofx Agzof Weight: 600gsm Operating speed: 4000 sheets/h This model is designed for hot stamping and features a large heating plate. Weight: 2300kg Holder manufactured by Hakro. Includes frame, fillers, and letterpress locks.

Condition: good (used), Karl Krause Hot Stamping press Pjdpfx Ajx N Dxvsgzorf Manufactured by Karl Krause, Germany, The machine is fully operational, after modernization of the control system. The work table is moveable. The device was purchased from a school workshop and has not been used in production. Power supply: 230V Heating plate size: 400x275mm. Weight: approx. 600kg.

Condition: good (used), Heidelberg Tiegel TP Letterpress Hot Stamping This machine is ready for hot foil stamping, die cutting, printing, creasing, perforating, and more. The machine is in very good condition. Original Heidelberg ART hot foil stamping machine with temperature control and a drilled heating plate. This machine is from the end of its production years, an incredibly rare model. This version is distinguished by its exclusive roller holders, a drawer under the machine, and a large protective cover for the wheel. Inking system. Prodpfex N Dwrex Agzsf Hard platen for the pressure plate. Set of accessories and tools. Machine format: 26x38cm 600gsm grammage 5000 sheets/h speed 1200kg weight 400V power supply Fully complete, includes two frames, spare parts, and instructions.

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Specifications: Prodex Hqnxopfx Agzsf Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Psdex Hqmhspfx Agzerf Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors – 3 operating modes: continuous, time-delayed, manual Psdpfx Aexzulzsgzjrf – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Pjdpfx Aexp Ntvsgzerf Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: 02048020376, Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001) Prsdpfxoxmiqij Agzof

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving Pjdpfswxtb Eox Agzerf – central lubrication – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Prjdpfxjwck U Rs Agzjf Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: good (used), Year of construction: 1969, functionality: fully functional, BOBST AUTOMATIC HOT FOIL STAMPING DIE CUTTING MACHINE • TYPE : SP 1080 E • SIZE : 78 x 108 cm • YEAR : 1969 (FEKET – 2014) Details: Hot Foil Stamping Machine Carton board min: 80 gr Carton board max: 800 gr Corrugated board max: 2 mm Prsdpovm Dapsfx Agzof Sheet size min: 29,5x35 cm Sheet size max: 78x108 cm Speed max: 4000 s/h Stamping speed max: 4000 s/h Stamping & embossing size max: 78x108 (Longitudinal) Stamping & embossing size max. 78x108 (Transversal) Die cutting size max: 78x108 Temperature max 180 ºC Foll length: 1000 meter Longitudinal: Web width advance shafts: 72 cm Transverse: Web width advance shafts 102 cm Max. pile height (feeder unit): 120 cm Max. pile height (delivery unit): 120 cm It is in very good condition Available immediately

Year of construction: 2009, condition: used, MADAG DP H120 Hot Stamping Machine • Year of manufacture: 2009 • Pre-owned and fully functional machine • Manufacturer: MADAG (Model DP H120) • Application: Stamping • Optional: Inspection and demonstration available upon request ___ Prsdpfx Aoxy Ra Esgzsf Our General Terms and Conditions apply. The seller is not liable for typographical errors or data transmission mistakes. All information and images were provided by the owner and authorized for publication. The visual condition of the items corresponds to their age and the photos shown. The technical condition and wear of the items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Podpox Ezkuefx Agzsrf Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, Predpfew Udy Nex Agzsf We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,250 kg, Hot Foil Stamping Tiegel / Tiegel Heidelberg GTP Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Online-Video-Inspection by FaceTime Available Immediately - Can be inspect Prsdpfsxu Uc Hex Agzsf Can be test

Year of construction: 2004, condition: good (used), coil, coil edge guide brake load cells 12 holographic spool unwinders hot stamping unit Prjdsmmc Uijpfx Agzef cooling suction hood with collection bag boiler refrigerator electrical panel operator panel

Condition: excellent (used), A3 format Gilding Additional frame Die-cutting material Pedjxtwx Ijpfx Agzjrf

Condition: good (used), machine/vehicle number: 169693, Heidelberg embossing platen TP, machine number T169693 + Heidelberg embossing platen TP, T191298, machine is in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. Prodpfx Agevvikfezef You are welcome to view the machine in our facility by appointment.

Condition: used, Year of construction: 2006, machine/vehicle number: 20618, Heißfolienprägemaschine / Hot Foil Stamping American Supply HFS Year 2006 - Serial-No. 20618 Prgefläche / Hot Foil Stamping area max. 80 x 150mm Druckleistung / Pressure max. 600Kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Psdoup Eimjpfx Agzerf

Condition: used, Prägepresse / Hot Foil Stamping Press Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Prsdpot Drnxsfx Agzjf

Condition: used, Year of construction: 1985, machine/vehicle number: 7458, Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2PBaujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Prodjp N T N Hspfx Agzjf Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1970, Hot Foil Stamping Tiegel / Heißfolienpräge Tiegel Heidelberg GTP Year 1970 - Serial-No. GTP 66141 Podot Hafwjpfx Agzsrf Size min.: 85 x 102mm Size max.: 340 x 460mm Speed min. min.: 1.500 sph - max. 4.000 sph Punching pressure: 60T Weight approx. 2250kg Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 21035, Heißpräge - Kniehebelprägepresse - Embossing Hot Stamping Press Krause FNPSerial-No. 4798 Stamping size: 550 x 400 mm Prjdpfxeh Ayg Uj Agzef Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test