Drill sharpener buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move

FC-80N drill sharpener

Deinze, BelgiumBelgium dealership location
6190 km
used
Type FC-80N Pskg8u Up to 100 mm drills more

ZM drill sharpener

Deinze, BelgiumBelgium dealership location
6190 km
used
speed: 2880 / 3450 rpm W9cnktzae power: 0,37 kW more

Breda AFP 80 drill sharpener

Deinze, BelgiumBelgium dealership location
6190 km
used
For sharpening twist drills min/max dia of drill: 10/80 mm angle range: min 80° - max 160° Automatic shift amp; stop W9ckbw2dz grindingwheel dia: 254 mm internal dia of wheel: 127 mm power: 2 HP more
1
Elect./Voltage: 208 V, 60 Cy, 3 Ph. Bbu28hgq3m CHMER CM H32Z EDM Hole Drilling Machine -- Cross travel 9.8". -- Z-Axis servo travel 13.38". -- Backslide travel 7.9". -- Electrode diameters available 0.0080" - 0.236". -- Max height of workpiece 13.8". -- Dielectric reservoir capacity 6.3 Gal. -- Wire guide 0.040". -- Dimensions 35.4" X 4.43" X 89". -- Weight 1,763 Lbs. Equipped with: -- Programmable control. -- X-Y-Z-Axis built in DRO system. -- High precision glass scales. -- Aut... more
6
MACHINE DATA WEEKE BHX 500 DRILL DD-20 CNC Machining Centre Make : WEEKE Model : OPTIMA T BHX 500 Serial# : 0-250-17-1159 Year of Mfg. : 2007 Condition : Very Good only few working hours Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in the US till now! DESCRIPTION Feed thru CNC P & P Router Vertical and Horizontal Borer Top and Bottom Borer ... more
6

Radial Drill Alzmetall AX3/S

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2009
ready for operation (used)
Ser. No. PRJ041160, speed 160-2.250 rpm., machine vice, swivel-mounted Bcr8nnywsr more
1
A used table of drilling plant manufacturer: UNION Gibkgnj7i Type and year of manufacture unknown Table size: 2500x2000mm Table load: approx. 18 t Total weight: 11.8 t more
5
Drill grinder, drill grinder, tool and Cutter Grinder, drills grinding machine Cajtmnzi SIA max Ø 100 mm Boring retainer up to max Ø 32 mm -Water cooled -without collets -Easy and fast -All grinding positions are preset -A wheel for all operations -Robust construction Dimensions 1000/900/H1500 mm Weight 650 kg more
1
Elect./Voltage: 208 V Bbu7uo3q0c HAAS DT-1 CNC Drill Tap Center -- X travel 20". -- Y travel 16". -- Z travel 15.5". -- Table size: 26" x 15". -- Max. table load (evenly distrib.) 250 lbs. -- Spindle nose to table top 6" - 21.5". -- Rapid traverse rate all axes 2400 ipm. -- Cutting feed rate all axes 0.1 - 1200 ipm. -- Spindle speed 15,000 rpm. -- Spindle taper BT 30. -- Spindle motor 15 hp. -- Tool changer capacity 20+1 stations. -- Tool change time (chip to chip) 1.8 sec. --... more


drill shar...
daily

New machines via email!

Stay updated!
8
Drilling depth 500mm max Cap.3-16mm Spindlenose MT2 MK2 340-600-980-1600 RPM G7rnrcx Spindel can tilt 15°up and down Hightadjustment 235mm Tabledimensions 650x410 Table can turn 360° Coolant pump DRO on 1 axe Tableadjustment 400mm Automatic powerfeed with peckcycle more
8

Drilling/Milling System Crea-Drill

Amsterdam, NetherlandsNetherlands dealership location
6220 km
ready for operation (used)
Hiqf8y more
5

Drilling line PEDDINGHAUS TDK1000 / 9

Köln, GermanyGermany dealership location
6416 km
1994
used
size of profile - max.:1000 mm Number of drilling agregates:9 Stk. Gvlmdc bore diameter:8 - 40 mm total power requirement:40 kW weight of the machine ca.:9 t Peddinghaus beam drill line for beams sizes of 1000 mm in height inner air cooling for drill spindles · max. beam height: 400 mm · operatin voltage: 380 V / 50 Hz · control voltage: 24V · 9 drill spindles (3 spindles per axis) · marking unit Signomat 05 · CNC-control Siemens · without transport system more
6
Tool holder MK 4 Stepless speed adjustment Tachometer Bbouydkiqa Automatic feed in 3 speeds more
5
Paper drilling machine, - 2-spindle drilling machine fixed spacing for filing holes side stop on tab - collets Sinks by means of hand lever div. replacement drill bit drill bit Qkynlzddi more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbu7xexdol Cincinnati Bickford Super Service Radial Drill -- Column diameter: 17" -- Length of arm: 5' -- Length of travel (approx.): 53" -- 15 HP GE motor -- Amps 39/19.5 43.8/21.9 -- Cutting speed (iron or steel): 3/16" - 2.5" diameter at 80 ft. cutting speed or 13/16" - 11" diameter at 40 ft. cutting speed -- 9 positions: 1,700 - 14 -- Overall dimensions: 140" x 94" x 130" high -- T-shaped base with T-slotted work table more
4

Spiral drill grinder SCHANBACHER S 3-50

Bünde, GermanyGermany dealership location
6460 km
1973
used
grinding range 3-50 mm sharp cornered angle min./max. 90-140° weight ca. 120 kg dimensions of the machine ca. 810 x 570 x 1260 mm Condition: ready for operation Electric 380 Volt Protective hood Fine angle adjustable / grinding - kind tridimensional. 9h220qtik Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
16

Drill Suhner Monomaster BEM20 125

Amsterdam, NetherlandsNetherlands dealership location
6220 km
2007
ready for operation (used)
Equipped with 4 drilling units, make Suhner, type Monomaster BEM20 125, table dim. 500 x 3,000 mmDE4-fach Reihenbohranlage (int. Nr. 000006), #464Bestueckt mit 4 Bohraggregaten, Fabr. Suhner, Typ Monomaster BEM20 125, Tischabm. 500 x 3.000 mm Ejenwo more
5
work piece width:1000 mm Bafx83voao workpiece height:420 mm bore diameter:8 - 40 mm weight of the machine ca.:18 t dimensions of the machine ca.:B x L x H 6,2 x 6,5 x 2,9 m The sawdrill line consists of a drilling system from Peddinghaus - BDL 1000/9 - and a band saw from Meba - 1020 DGP. It is used but in good condition. The band saw is from the year 2005, the drill line from 2007. Technical data Peddinghaus drilling rig BDL 1000/9 The maximum working width is 1000 mm, the maximum working h... more
1
Csepel 12 UH 1600 radial drilling machine type 12 UH 1600 Drilling capacity 65 mm Nffll Mount Mt 5 Throat depth 1600 mm Quill stroke 315 mm Speeds 16-1600 rpm including tilting table 1000 x 750 mm item condition: used The dismantling and transportation must be by the buyer in Hanau more
5
Hammer drill, rotary hammer, combination hammer, Bosch hammer Nominal consumption 750 W Mains connection 230 V Drilling Weight 20 kg Cn3xbdw3 more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbu7rf9s7x YOSHIDA YR5-115 45” x 12” Radial DrillSpecifications -- Maximum distance, column surface to spindle end 45-1/4” -- Minimum distance, column surface to spindle end 11-1/16” -- Maximum distance, base top to spindle end 50-13/16” -- Minimum distance, base top to spindle end 14-15/16” -- Drilling capacity in steel 2” -- Tapping capacity in steel 1-7/8&rd... more
4
Tool holder MK 4 Bcrqdcij0p Projection up to 1000 mm Car. Feed Motor-driven height adjustment more
3

Pillar Drilling Machine ERLO TCA40

Dreieich, GermanyGermany dealership location
6568 km
1986
used
bore capacity in steel (diameter) 40 mm throat 360 mm Yriayk bore stroke 240 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 68 - 1270 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V total power requirement 1,6 kW weight of the machine ca. 730 kg dimensions of the machine ca. 1,00 x 0,95 x 1,42 m - [...] / 186 - autom. feed - coolant equipment - machine lamp more
5
work piece width:620 mm workpiece height:450 mm Ncv9b drill diameter:10 - 40 mm The Kaltenbach KBS 620 APS603 saw drill line from 1999 is overhauled at Nenok and is in good condition before delivery. The combination consists of the Kaltenbach band saw KBS 620 DG and an APS 603 drill line. The band saw is semi-automatic and equipped with diagonal cutting +/- and suitable for sawing steel profiles. The saw blade dimensions are 6175 x 41 x 1.3 mm. The cutting speed is infinitely variable in a ran... more
8
Open side coordinates drill; Manufacturer WMW Mikromat Dresden, model: BKoE 315 x 500; Specifications: table size 315 x 500 mm, maximum load 100 kg, adjustment speed 52/160/400/1000 mm / min; Drill feeds up / down 0.006/0.025/0.055/0.22 mm / Rev; Friction feed up / down 0.5 mm/Rev; Spindle stroke 100 mm core diameter 80 mm tool holder MK 3. Speed range with 19 steps (45-2,800 RPM); Workspace table: longitudinal adjustment 400 mm, lateral adjustment 250 mm; height adjustment spindle stock 360 mm... more
5
Radial drilling machine, drilling machine, boom drill Unloaded 1250 mm Taper mount MK5 Motor power 4 kW -Drehzahlen 14-1800 rpm Fe3odxr Columns ø 350 mm Spindle stroke 400 mm Thread cutting device -automatischer feed 0.025 1.25 mm / Rev Cube 650/1015/H655 mm Clamping area 815 x 1200 mm Dimensions 2300/1000/H3030 mm Weight 3100 kg more
1
Elect./Voltage: Cxnznwf FOSDICK 4' x 15" Radial Drill Specifications -- Capacity 4' x 15" -- 5-3/4" diameter spindle with #6 mt -- 36 spindle speeds 17 - 1800 rpm -- Feed changes .003 - .077 ipm -- Power clamping -- Power elevation -- Rapid on the head -- Work light -- Coolant system -- Motor 10 hp more
4

rows and dowel hole drilling machine Scheer DB150

Herrnzell 6, 82281 Egenhofen / Herrnzell, DEGermany
6816 km
1996
ready for operation (used)
Type: DB150 used machine drilling unit swiveled 21 drill spacing: 32mm wide accessory Bbyqufcix7 drive system power consumption: 2,2 kW Year of construction: 1996 location: Warehouse / 82281 Herrnzell more
5

Pillar Drilling Machine IBARMIA B40

Dreieich, GermanyGermany dealership location
6568 km
1998
used
bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 table-size 560 x 480 mm spindle turning speed range 61 - 1169 U/min feed range - boring 0,1/0,2/0,3/0,4 mm/U coolant voltage 400 V 8pl3hmyrw total power requirement 2,4 kW weight of the machine ca. 620 kg dimensions of the machine ca. 0,60 x 1,10 x 2,37 m threading device - [...]: 669 V - thread cutting device - automatic feed - rapid clamping boring chuck ROEHM Ø 1-13 mm - coolant equipment - ma... more
5
Number of drilling agregates:3 Stk. bore diameter:40 mm Cutting system:Autogen total power requirement:30 kW weight of the machine ca.:6,5 t Bbdnz9vjxt max. workpiece height:600 x 50 x 6000 mm Min. material size:80 x 8 mm machine dimensions (length x width x height):2000 x 1900 x 2800 mm Peddinghaus FDB 600 flat steel drilling and burning machine from the Peddimat product range for economical drilling and flame cutting of sheet metal, steel plates and flat steel. The FDB 600 is equipped with ... more
2

Radial Drilling Machine KOLB HKH

Mönchengladbach, GermanyGermany dealership location
6371 km
1970
used
bore capacity in steel (diameter):60 mm arm length:2000 mm workpiece height max.:1600 mm spindle turning speed range:28 - 950 U/min feeds:0,07 - 2,9 mm/U spindle taper MT:5 total power requirement:13 kW weight of the machine ca.:6 t dimensions of the machine ca.:3,2 x 1,6 x 3,4 m Gcm7pv0x8 - boring cube 800 x 600 x 600 mm - central clamping more
4
On drills, drills, drills for drilling machine, drilling Center G70feli -53 x NC drill with thread Diameter 32-42 mm -nutzbare length mm Recording MK4 Type HSS -only sold Weight 84 kg more
1
Elect./Voltage: Glz7ticj8 KENT TPR-1230H Radial Arm Drill; -- Diameter of Column 11.8". -- Length of arm 48". -- Maximum drilling diameter casting/steel 2.16"/1.65". -- Distance between spindle axis and column max/min: 46"/13.4". -- Spindle Taper [...] 4. -- Range of spindle speed (12 steps) 44 - 1,500 RPM -- Range of spindle feed speed (3 steps): 0.002, 0.0035", 0.0059"/Rev. -- Spindle motor 2 HP -- T-slotted work table: 25" x 20.5" x 16.3" more
3

Bench Drilling Machine FLOTT TB 15 GL Digi

Bünde, GermanyGermany dealership location
6460 km
1990
used
bore capacity in steel (diameter) 16 mm throat 200 mm Yyhophvj bore stroke 80 mm speeds 6 / 160 - 1600 U/min spindle taper MK 2 column diameter 70 mm table-size 280 x 200 mm total power requirement 0,55 kW weight of the machine ca. 140 kg dimensions of the machine ca. 0,32 x 0,68 x 1,56 m Digital readout Hub der Spindel Speed change via V-belt disc Electric drill on stand with digital display for the spindle stroke. The machine was originally a drilling and tapping machine. The thread cy... more
3

Drilling Machine Ryazan PT 403

Kaiserslautern, GermanyGermany
6535 km
1976
excellent (used)
OVERVIEW: Brand: Ryazan Model: PT 403 Application type: Drilling Machine type: Drilling Machine Construction year: 1976 Production hours: 9000 Location: Lithuania Origin country: Russia Nfa7p GENERAL DATA: Measurements width: 143000 mm Measurements depth: 25000 mm Measurements height: 15500 mm Machine weight: 23500 kg MAIN DRIVE: Spindle speed range: 2-100 1/min CONTROL UNIT: Brand: Ryazan MOVEMENT: X-AXIS movement: 3880 mm Y-AXIS movement: 245 mm WORKPIECE: Wor... more
5
Number of drilling agregates:2 Stk. bore diameter:8 - 50 mm Cutting system: weight of the machine ca.:12 t floor-plate width:220 - 2500 mm Plate thickness:6 - 60 mm floor-plate length:50 - 6000 mm workpiece weight:6000 kg Tool changer:2 x 6-fach boring spindle drive:26 kW rapid- return speed:10000 mm/min bore feed:0-800 mm/min Eeeler2 drilling spindle positioning:30000 mm/min torch height adjustment:200 mm threading:M8 ? M30 Kaltenbach KF 2512 CNC Plate Processing Center The Kaltenbach KF ... more
1

Upright Drilling Machine OPTIMUM 508 VS 20

Mönchengladbach, GermanyGermany dealership location
6371 km
1995
used
bore capacity in steel (diameter):20 mm throat:210 mm bore stroke:150 mm spindle turning speed range:120 - 1600 U/min table:400 x 450 mm feeds:0,1 - 0,3 mm/U total power requirement:1,4 kW weight of the machine ca.:0,2 t dimensions of the machine ca.:1,0 x 0,8 x 1,8 m O2fc2kk more
5
Drill grinder, drill grinder, tool and Cutter Grinder, drills grinding machine Drill grinding wheels max Ø 200 x 40 mm Back grinding wheels max Ø 80 x 30 mm Drive 0.55 kW -Adjusting device -Easy and fast -All grinding positions are preset Grinding range from 3 to 50 mm ø Point angle of 90 ° to 140 ° -The clearance angle is adjustable -The type of bevel is a three-dimensional Dimensions 800/1000/H1580 mm Weight 342 kg I890sqcl0 more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Cvbqav7 MEUSER M50R Radial Drill Specifications -- Capacity 5’ x 13” -- 30-2400 [...] -- Power clamping -- Power elevation -- #5 morse taper in spindle -- 12 feeds .002-.032 ipr -- 12" spindle travel -- Motor 7 hp more
6

Drills Qualter & Smith QSR 4 Qualter & Smith QSR 4

Birmingham , United KingdomUnited Kingdom dealership location
5784 km
ready for operation (used)
QUALTER & SMITH QSR 4 Radial Dril Drilling Radius 1257mm, Hi2dmgz9y max dia drilled 40mm, speeds 60 -1750rpm more
8
Deep hole drilling machine Manufacturer: Gildemeister + Knoll Type: B2B-2000 Bcrildwbap Year of construction: 1977 Overhaul in 2002 Drilling Center about flat track: 315 mm Swing over bed: 630 mm Drilling: 15-60 mm Core drilling: 85 mm Drilling: 174 mm Drilling depth: 2.000 mm Bed length: 7.000 mm Bed width: 403 mm Power: 22 kw Spindle head: Size 11 Inner bevel: 1:20 D = 109 x 120 mm Spindle bore: D = 103 mm incl. cooling plant Weight: approx. 6,000 kg Space requirements: a... more
5
work piece width:620 mm Bb0qxopmla workpiece height: 350 - 400 mm drill diameter:10 - 40 mm number of drill axes:3 Measurement saw band:6175 x 41 x 1,3 mm cutting speed:15 - 90 m/min The Kaltenbach band saw KBS 620 DG and drill line APS 615 is a machine combination with Signomat and transport system. The drill line is in very good condition and has been upgraded by Kaltenbach for quick drilling with carbide drills. This makes it possible to use Kennametal KSEM drills on all 3 drill axes. The... more
1

Drilling machine Knuth R 40

Schwäbisch Gmünd , GermanyGermany
6698 km
good (used)
Drilling machine fully functional Knuth R40. Nfcpf more
5
Drilling machine, vertical drilling machine, drilling machines, column drilling machine Table size 230 x 275 mm Spindle retainer B13 Unloaded 290 mm Ryseisljm -Drehzahlen 500-3000 U/min Columns ø 100 mm Spindle stroke 50 mm Attachable belts drive Dimensions 430/800/H1600 mm Weight 226 kg more
1
Elect./Voltage: Bbu7rpqyry UNISIG USK75-2000 CNC Deep Hole Drilling Machine -- Minimum drilling capacity in solid blank: 0.093" -- Maximum drilling capacity in solid blank: 3" -- Maximum drilling capacity counter bore or trepan: 4.3" -- Maximum drilling depth: 80" -- Table size: 40" x 66" -- Travel of counter rotation spindle: 40" -- Max distance drill face to counter rotation spindle: 84" -- Table load capacity: 11,000 Lbs. -- Spindle drive: 50 HP -- Approximate dimensio... more
6
-Accessories available. Coordinate table KS 300 Procedures: X away 320 mm Y away 250 mm Clamping area 640 x 300 mm Drilling capacity in steel 18 mm Tapping up to 16 M stroke of spindle 110 mm Spindle speeds of 135 - 4'500 rpm Power of spindle motor 0.45/1,1 KW Weight approx. 650 kg with coordinate table & base Nfbrf more
5

Drilling Machine WOTAN B-105-S

Kaiserslautern, GermanyGermany
6535 km
1974
excellent (used)
OVERVIEW: Brand: WOTAN Model: B-105-S Application type: Drilling Machine type: Drilling Machine Construction year: 1974 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 4650 mm Measurements depth: 3900 mm Machine weight: 11500 kg MAIN DRIVE: Spindle speed range: 9-1000 1/min CONTROL UNIT: Brand: Heidenhain MOVEMENT: Rapid Traverse: 2,6 m/min WORKPIECE: Bcp73eekr9 Drill spindle drm: 105 mm Spindle sleeve stroke: 700 mm Vertical adjustm... more
5
work piece width:300 mm workpiece height:50 mm bore diameter:8 - 27 mm total power requirement:25 kW weight of the machine ca.:3 t dimensions of the machine ca.:2,3 x 2,5 x 1,4 m workpiece weight:max. 3 t Qf2v3yxv Peddinghaus CNC controlled beam saw drill line DSC300 D with disc saw for 90° cut, saw blade size 630 mm, incl. signomat, roller feed measuring system, 3 drill spindles for HHS inner coolant drills Ø =8-27 mm, incl. infeed and outfeed roller conveyor. This small saw drill line is esp... more
6
bore capacity in steel (diameter) 40, St 60 mm arm length 750 mm workpiece height max. 705 mm tool taper SK40 z-axis 200 mm w-axis 410 mm distance spindle nose and table 95 - 705 mm rapid traverse X/Z/Y 7,5 / 5 / 7,5 m/min. spindle turning speed range 15-2.800 U/min table dimensions (lengthxwidth) 600 x 1200 mm Msajc0r7 weight of the machine ca. ca. 3 t with 3 tables more


drill shar...
daily

New machines via email!

Stay updated!

to

to

Edit search
DRILL SHARPENER
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close