Used Bimak Drill for sale (4,912)

Condition: excellent (used), table with clamp spindle speed 35-1980 RPM Hnodpfx Ajw A Ri Ujftsu drilling depth 120mm

Condition: excellent (used), two speed with switch belt gear Hnodsnr Hk Tepfx Aftju motor power 0,3kW CE year 2003 Connection 380V

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Hodpfxowt Swzs Aftonu

Condition: reconditioned (used), Year of construction: 2002, drill gomad WU 3G 2002 YEAR LIGNUM WU drills Drill WU 3G 3 TOP UNITS Flexible task drills with adjustable spacing of top, side, bottom and swivel drilling units equipped with multi-spindle drilling heads. Designed for drilling all kinds of holes. The modular structure provides many configuration options (working length, number of units, pneumatic clamps, etc.). They enable single- and multi-stage drilling and programming the operation of units depending on the needs. Feeding and receiving of the processed material is done manually. Other drilling functions are performed automatically (material pressure, simultaneous 3-sided drilling, pressure release). Spindle spacing scale according to the order 16 - 44 mm Distance between JC head units 250 - 2500mm Hsdpfji Hqhfex Aftonu Width of JG, JB, JC, JS units 160mm Unit feed cylinder stroke JG - 100mm, JB 100 (120mm) Maximum material width 200mm Maximum material thickness 50mm Maximum drilling diameter 35mm Spindle speed 3000rpm JB units spindle center height above table 6 - 35mm (55mm) Drilling unit engine power 1.1 kW Duration of one-stage and two-stage cycle 4 - 6 sec and 6 - 10 sec Air pressure required 0.4 - 0.6 MPa Compressed air demand 2 m3/h per drilling unit Type of feed drive pneumatic with stepless speed regulation Supply voltage 400V, 50Hz Overall dimensions (L x W x H) 2200 - 4000 x 1500 x 2000mm Weight 2500 - 3000 kg Contact the advertiser Przemyslaw Kretowicz is online lignum 602 Show number

Condition: good (used), Year of construction: 2003, NAGEL MODEL TBT M320-6 6 SPINDLE CNC HORIZONTAL GUN DRILL, 2003 Equipped with: Panel Mate Power Pro Control Counter Rotation Cross Drilling High Pressure Coolant System Auto Loader Hodpsrtrztofx Aftonu Magnetic Chip Separator Hydraulic System Chiller Specifications: Maximum Drill Depth (Approx): 16" Maximum Drill Length: 36" Number of Drill Spindles: 6 Spindle Motors (3): 7.5HP HP Per Spindle: 3.75 Drill Head Slide Stroke: 16.9" Maximum Diameter Mild Steel: 0.750"

Condition: used, Year of construction: 2016, Please contact ATS Norway for more information Please provide reference number upon request: 21270 Specifications: Hnsdpfx Aoxatqmofteu Model year: 2016 Drilling hours: approx. 1400 Weight: 10,000 kg Undercarriage (see pictures) Winch Ready for delivery Description:2016 Sandvik Dino DC400Ri drilling rig with an almost new undercarriage.The undercarriage was replaced after the last job.The rig is ready for delivery. Own weight: 10000 Model: DC400RI

Condition: good (used), Reamer, twist drill, drill Hnodpev H D N Rjfx Aftju -Twist drills: different sizes on request -different manufacturers -Price: Ø 10 - 30 mm 0.50 EUR/mm (drill Ø 20 mm = 10 EUR net) -Price: Ø 31 - 45 mm 1 EUR/mm (drill Ø 35 mm = 35 EUR net) -Price: Ø 46 - 80 mm 1.60 EUR/mm (drill Ø 50 mm = 80 EUR net) -Two-cutter -Diameter: 10-80mm -different lengths -Recordings: MK1 - MK6 -Type: HSS

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Hjdpfx Afexpfhvetonu Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation

Condition: ready for operation (used), Voortman VB1250 lintzaag kap: 1250 x 500 mm versteksnede +/- 60°: 1000 x 500 mm versteksnede +/- 45°: 850 x 500 mm versteksnede -30°: 500 x 500 mm zaagsnelheid: 40 120 m/min vermogen: 7,5 kW Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman V630 drievoudige boorunit 2 horizontale boorunits 1 verticale booreenheid elke unit heeft een automatische gereedschapswisselaar met 5 posities spindel: SK40 (koeling via spindel) boordiameter: 8/40 mm boorsnelheid: 0 2000 tpm draadtappen: M8/M24 profielhoogtemeting inbegrepen middelpuntmarkering inbegrepen nummermarkeringseenheid inbegrepen 18 meter invoerrollenbanen 6 dwarstransportbanden van 4 meter lengte maximale breedte: 1050 mm cap: 400 kg/m max positioneringsgewicht: 9 ton Roltransportmeetsysteem = onbeperkte meetlengte Vacon 110 CNC-besturing Hydraulisch aggregaat 4kW - 160 bar Hsdswlkwwopfx Aftonu

Condition: good (used), Code: 0227 Brand: VALEX Model: TR 32 - CE Standard Pillar drill for wood, metals, aluminum, and various materials - CE Standard Technical data: Single-phase motor V. 220 - Power 1500 watt N° 12 speeds Max distance between spindle and base 1050 mm Spindle-column center distance 260 mm Spindle 20 mm Work surface 475 x 425 mm Hodpfx Aoxnnimsftjnu Work surface material cast iron Table inclination 0-45° Column diameter 92 mm Overall dimensions mm 480 x 800 x 1700 h Weight kg 144

Condition: good (used), Year of construction: 2002, functionality: fully functional, throat depth: 300 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 31 rpm, drilling capacity: 50 mm, stroke length: 250 mm, spindle mount: MK 5, drilling depth: 250 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 31 rpm, rotational speed (max.): 1,400 rpm, overall weight: 1,200 kg, thread cutting capacity: M 36, Drilling capacity: Ø 50 mm Threadcutting capacity: M3 - M33 Spindle nose: MK-5 Spindle speeds: 31,5 - 1.400 rpm Spindle feeds: 0,10 - 0,14 - 0,20 mm/rev. 0,28 - 0,40 - 0,56 mm/rev. 0,80 - 1,12 - 1,60 mm/rev. Spindle stroke: 250 mm Table size: 500 x 500 mm Throat: 300 mm Hnodpfjxk Uw Nex Aftou Motor power: 4 kW Machine LxWxH: 87 x 110 x 270 cm Machine weight: 1.200 kg

Condition: used, Year of construction: 2005, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21280 Specifications: Hnodpfx Aoxbbcgsfteu 2005 model 16,457 engine hours 9,610 drilling hours Weight: 8,500 kg KW: 88 Steel tracks Winch Description:Nemek 407 TS drilling rig for sale on behalf of customer – a versatile rig for drilling e.g. energy and water wells.The rig is described as operational but in need of minor service. Own weight: 8500 Engine hours: 16457 Model: 407 TS

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 2 -Clamping table: 340 x 280 mm -Travel: 350 mm Hnodpfxjxm Rzis Aftsu -Spindle holder: MK2 -Projection: 215 mm -Speeds: 355/710/1400/2800 rpm -Column: diameter 93 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEM 0.8/1.0 kW with brake -Voltage: 380 V -Number: 2x drill available -Price: per piece -Dimensions: 550/480/H1270 mm -Weight:157 kg/piece

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Documentation Hnjdpfx Ajxpfgleftju

Condition: new, FACTORY-NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis travel: 4,000 mm Z-axis travel: 1,500 mm Y-axis (cross-ram): 1,300 mm Hodpfxoq I Nkbs Aftonu V-axis (cross column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. load capacity up to 15,000 kg Automatic universal swiveling head 1° x 1° (optionally with fixed ram Ø 210mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical / horizontal change) Double hinged belt chip conveyor (longitudinal) Perimetric guarding (open at top) Only inquiries from Germany will be processed.

Condition: good (used), Year of construction: 2001, functionality: fully functional, throat depth: 360 mm, spindle speed (max.): 1,270 rpm, spindle speed (min.): 68 rpm, total height: 2,350 mm, drilling capacity: 40 mm, total width: 600 mm, total length: 900 mm, stroke length: 200 mm, spindle mount: MK 4, drilling depth: 200 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 68 rpm, rotational speed (max.): 1,270 rpm, overall weight: 650 kg, Drilling capacity: Ø 40 mm Spindle nose: MK-4 Spindle speeds: 68 - 1.270 rpm Spindle feeds: 0,10 - 0,20 - 0,30 - 0,40 mm/rev. Spindle stroke: 200 mm Table size: 550 x 550 mm Throat: 360 mm Country of origin: Spain Hsdpfx Ajxizb Ssftjnu Motor power: 2,2 kW Machine LxWxH: 900 x 600 x 2.350 cm Machine weight: 650 kg

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Hodew Rag Dspfx Aftsnu Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer will soon need repacking Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer will soon need repacking.Ready for delivery.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V -Dimensions: 620/480/H1710 mm Hodpfoir E Snjx Aftjnu -Total weight: approx. 182 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts Hnodsxn A Spspfx Afteu - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: new, BRAND NEW T-TYPE FLOOR TYPE MILLING MACHINE HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 4,000 mm Z-axis: 2,000 mm Y-axis (cross-ram): 1,500 mm V-axis (cross-column): 1,000 mm Rotary table (C-axis): 2,195 x 2,195 mm Max. load capacity up to 20,000 kg Automatic universal swivel head 1° x 1° (optional with fixed quill Ø 210 mm) Spindle taper: SK50 DIN 69871/A Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Hsdpfx Afoq I Nlyotonu Rapid traverse X, Y, V, Z: 30 m/min Positioning accuracy: 0.020 mm Repeatability: 0.010 mm Tool changer: 60-position chain magazine (vertical/horizontal change) Double-hinged chip conveyor (longitudinal) Perimetric enclosure (open top) Only inquiries from Germany will be answered.

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Hnedexatp Aspfx Aftou Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn betydelig oppgradert m/ hc25 hammer og stangskifter

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: Hnjdew Ucm Uopfx Aftsu 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Own weight: Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2010, operating hours: 3,030 h, Please contact ATS Norway for more information Hsdjvgy E Uopfx Aftsnu Please provide reference number upon request: 18549 Specifications: Model year: 2010 Hours: Approximately 3030 hours Power: 55 kW Weight: Approximately 8000 kg Chassis: See pictures Belt width: Approx. 40 cm Engine: Deutz diesel engine Undercarriage commutation Winch Hydraulic water pump Remote control Toolbox Stabilizing legs Description: 2010 Comacchio MC500 drilling rig with only 3030 hours on the counter. The rig works as it should, but is missing an emergency stop wire. It can drill both horizontally and vertically, and is delivered quickly. Hours: 3030 Own weight: 8000 Total Weight: 8000 Kw: 55 Model: MC 500

Condition: used, Year of construction: 2010, Field of application: Construction Serial number: 110M153xxxx Please contact ATS Norway for more information Hnedpovyf I Isfx Aftju Please provide reference number upon request: 19576 Specifications: - 2010 model - Hours: Approx. 2900 - Weight: 5200 kg - 62 kW - Tires (see pictures) - Winch - Radio control - Ready for delivery Description: Sandvik DC300R Drilling rig from 2010. Owner says he recently had it serviced. Ready for delivery. Hours: 2900 Total Weight: 5200 Kw: 62

Year of construction: 2019, condition: used, New: No Field of application: Construction Serial number: TMG19SEDO186/8992 011xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18688 Specifications: 2019 model Engine hours: approx. 5,100 Hammer hours: approx. 1,700 Power: 116 kW Weight: 10,500 kg Undercarriage (see pictures) Machine width: approx. 230 cm Winch Undercarriage replaced in 2024 L5 GPS system Grinder Hammer serviced by Epiroc Description:2019 Epiroc T30R drill rig equipped with L5 GPS system.Undercarriage was replaced in 2024.Hammer service performed by Epiroc, engine serviced in-house every 250 hours.Available for prompt delivery. Own weight: 10500 Total Weight: 10500 Width: 230 Kw: 116 Hammer hours: 1620 Hjdpfjxivxlsx Aftonu Engine hours: 4890 Model: FlexiRoc