Drill buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Elect./Voltage: 208/230/440/480, 60 Cy, 3 Ph Bbhydukdpv VERSAMAX FHD56C CNC EDM Drill (Hole Popper) -- Travel 23.6” x 19.7” x 17.7”. -- W-Axis travel 11.5”. -- Maximum workpiece dimensions 31.5” x 29.5”. -- Maximum workpiece weight 2,866 Lbs. -- Electrode size range 0.3mm – 3.0mm (0.0118"" - 0.1181""). -- Approximate dimensions 6' x 5'6"". -- Approximate weight 4,500 [...] with: -- 30 Amp power supply. -- Fully submerged operation. -- Integr... more
1
Elect./Voltage: Wdzhc UNISIG USK75-2000 CNC Deep Hole Drilling Machine -- Minimum Drilling Capacity In Solid Blank 093"" -- Maximum Drilling Capacity In Solid Blank 3"" -- Maximum Drilling Capacity Counter Bore or Trepan 4.3"" -- Maximum Drilling Depth 80"" -- Table Size 40"" x 66"" -- Travel of Counter Rotation Spindle 40"" -- Max Distance Drill Face to Counter Rotation Spindle 84"" -- Table Load Capacity 11,000 lbs -- Spindle Drive 50 HP -- Approximate Dimensions 390"" x 120"" -... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Dektn3gla YOSHIDA YR5-115 45” x 12” Radial DrillSpecifications -- Maximum distance, column surface to spindle end 45-1/4” -- Minimum distance, column surface to spindle end 11-1/16” -- Maximum distance, base top to spindle end 50-13/16” -- Minimum distance, base top to spindle end 14-15/16” -- Drilling capacity in steel 2” -- Tapping capacity in steel 1-7/8&rdq... more
1
Elect./Voltage: Mtu0qs TARUS TPSXGD 4896 CNC GUN DRILL -- Drill Diameter capacity : 2"" -- Table size: 54"" x 96"" -- X-Axis cross travel 96"" -- Y-Axis vertical travel 48"" -- Z-Axis drill depth 96"" -- Siemens 840D Controller -- All new electronics/servo motors 2011/2012 more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. B78vcfnkw CARLTON 1A RADIAL DRILL -- Column diameter 11"" -- Arm length 4' -- Face of column to spindle 48"" MAX / 9"" MIN -- Taper in spindle #4 MORSE -- Spindle diameter 2-1/2"" -- Spindle traverse in head 12"" -- Horizontal traverse of head 39"" -- Vertical traverse of arm on column 28-1/2"" -- Min/Max distance spindle to base 14"" / 53"" -- Height of base 8"" -- Working surface of base 36"" x 54"" -- Spindle speeds(12) 60 to 1,500 RPM... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Juvfly HAAS DT-1 CNC Drill Tap Center -- X travel 20"". -- Y travel 16"". -- Z travel 15.5"". -- Table size: 26"" x 15"". -- Max. table load (evenly distrib.) 250 lbs. -- Spindle nose to table top 6"" - 21.5"". -- Rapid traverse rate all axes 2400 ipm. -- Cutting feed rate all axes 0.1 - 1200 ipm. -- Spindle speed 15,000 rpm. -- Spindle taper BT 30. -- Spindle motor 15 hp. -- Bearing lubrication air/oil injection. -- Cooling air cooled. -- Ta... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Dhivo93wu CINCINNATI BICKFORD Super Service Radial DrillSpecifications: -- Column diameter 17"" -- Length of arm 5' -- Length of travel approx. 53"" -- Amps 39/19.5 43.8/21.9 -- Cast iron or steel 3/16 to 2.5 dia 80ft cutting speed 13/16 to 11 dia 40ft cutting speed -- 9 positions 1700-14 -- Overall dimensions 140"" x 94"" (rl x fb) 130""high -- T-shaped base with extra t-slotted work table more
1
Elect./Voltage: 97v3l8qsp FANUC Robodrill Alpha T14iBL -- Table dimensions 27.56"" x 15.35. -- Maximum load on table 550 lbs. -- Table top to spindle nose 6.30"" - 17.73"". -- X axis travel 27.56"". -- Y axis travel 15.74"". -- Z axis travel 13"". -- Rapid traverse rates 1870 IPM. -- Cutting feedrates 591 IPM. -- Spindle motor 30 min/continue 7.5 hp / 5 hp. -- Spindle speed 80 - 8,000 rpm. -- Spindle taper Bt #30 taper. -- Number of tool positions 14 position atc. -- Max Tool dia... more
1
Elect./Voltage: G7q9vxh GIDDINGS & LEWIS 956 Radial Drill Specifications -- Capacity 8' arm 19"" column -- (54) spindle speeds 7.9 - 1000 rpm -- #6 mt spindle taper -- Rapid traverse on head -- 20"" spindle travel -- 4 3/4"" spindle diameter -- (27) feeds .312 - 5 ipr -- 30 hp main motor -- Overall dimensions: 128"" h x 12' 8"" l x 4' 6"" w more
1
Elect./Voltage: 208/230/460 V, 60 Cy, 3 Ph 7j3e3awic ELDORADO/RICHARDS M-75-1041 Precision Deep Hole Gun Drill mounted on Richards Horizontal Boring Mill -- Drilling Diameter Maximum 1"" -- Drilling Diameter Minimum .0550"" -- Maximum Drilling Depth 48"" -- Spindle Speeds 480-3895 RPM -- Feed Rate Drilling 1-99.9 IPM -- Feed Rate Rapid 200 IPM -- Work Table 36"" x 60"" -- Height of Spindle Centerline 0-24"" -- Straightness per 12"" .001"" -- Coolant Pressure, Maximum ... more


drill
every day

New machines via email!

Be informed!
1
Elect./Voltage: Bbgy9uqrph BROTHER TC-228 Drilling & Tapping Center -- Table 23.6” x 11.8”. -- X travel 16.5”. -- Y travel 11.8”. -- Z travel 9.8”. -- Rapid traverse (x & y) 1417 ipm. -- Rapid traverse (z) 1181 ipm. -- Tool changer 10. -- Tool change time 1.2 seconds. -- Spindle speed 10,000 rpm. -- Tapping speed 6,000 rpm. -- Spindle motor 5 hp. -- Spindle taper #[...] with: -- Brother CNC Control. more
1
Elect./Voltage: 208V / 3PH / 60Hz Bafxybkmtx MODERN TF-1300H Radial Arm Drill -- Horizontal travel - 4'.? -- Spindle speeds - 12 (44RPM - 1500RPM). -- Spindle feeds - 12. -- Threads - 16. -- Drilling capacity steel - 2 1/8"". -- Morse taper: MT5. -- Dimensions: 90″ x 39″ x 88″. -- Weight 7,260 LBS. more
1
Elect./Voltage: 9s3fyamkp KENT TPR-1230H Radial Arm Drill; -- Diameter of Column 11.8"". -- Length of arm 48"". -- Maximum drilling diameter casting/steel 2.16""/1.65"". -- Distance between spindle axis and column max/min: 46""/13.4"". -- Spindle Taper [...] 4. -- Range of spindle speed (12 steps) 44 - 1,500 RPM -- Range of spindle feed speed (3 steps): 0.002, 0.0035"", 0.0059""/Rev. -- Spindle motor 2 HP -- T-slotted work table: 25"" x 20.5"" x 16.3"" more
1
Elect./Voltage: Dpipgev MONNIER & ZAHNER M621 Thread WhirlerSpecifications: -- Fanuc 18m control. -- Diameter of part 2.5 mm to 13 mm (.098” to .511”). -- Length of part 300 mm (11.81”). -- Length of thread whirled 200 mm (7.87”). -- Auto load/unload. -- Excellent condition. more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Mtxotg MEUSER M50R Radial Drill Specifications -- Capacity 5’ x 13” -- 30-2400 [...] -- Power clamping -- Power elevation -- #5 morse taper in spindle -- 12 feeds .002-.032 ipr -- 12"" spindle travel -- Motor 7 hp more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. E28tavt TARUS CNC Gun Drill -- X-Axis travel (table) 154” -- Y-Axis travel (spindle head )60” -- Z-Axis (drill unit) 84” -- W-Axis (column infeed) 30” -- Table: 100” x 154” -- Drilling spindle max diameter 2” -- Milling/spot facing spindle: 12 HP - 3400 RPM/ISO 50 -- Centralized coolant system: 1200 Gal/1200 PSI -- Tpi 2000 CNC -- Floor space 66’ x 30’ -- Machine height 16’ -- Weight ... more
1
Elect./Voltage: 220 V, 3 Ph. Baohoiylhm BROTHER TC-S2C-O Drill Tap -- Y axis 15.7”. -- Z axis 11.8”. -- Table size 31.5"" x 12.6"". -- Max table load 551 lbs. -- Spindle nose to table top: 7.1"" - 18.9"". -- Spindle speed 16,000 RPM. -- Spindle taper BT30. -- Spindle motor 10 hp. -- Tool changer 21 side mount ATC. -- Rapid traverse rate: 1969 IPM. -- Cutting feed rate: 394 / 787 IPM. -- Max tool length 9.8"". -- Tool change time 0.9 sec. -- Chip-to-chip time 1.7 sec.... more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. 8corccw0x 5' X 15"" CARLTON 1A Radial Arm Drill Specifications: -- Working surface of base 76-1/2"" x 43-1/2"" with (4) 1-1/16"" tee slots -- Spindle speeds (12) 25 to 1800 rpm -- Spindle taper #5 morse -- (6) spindle feeds .004 to .022 tpr -- (5) spindle threading feeds 8 - 11-1/2 - 14 - 18 - 27 tpi -- Spindle diameter 2-3/4"" -- Spindle travel 14"" -- Distance spindle to base 31"" min. to 79"" max. -- Max. distance center of spindle t... more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Cwyns22ke GIDDING & LEWIS Chipmaster Radial Drill -- Specifications: -- Arm 5' -- Column diameter 9"" (8 7/8"") -- Taper in spindle #4 morse -- Spindle quill diameter 2-5/8"" -- Spindle traverse in head 10-3/4"" -- Max/min distance, spindle to base 52""/26"" -- Working surface of base 30""fb x 48""lr -- Height of base 7"" -- 12 spindle speeds 90 - 1800 rpm -- Inch spindle feeds 4,8,14,20 thousands per rev -- Metric spindle feeds 10... more
1
Elect./Voltage: M87zd HAAS MDC-500 -- X travels 20"". -- Y travels 14"". -- Z travels 20"". -- Table size 20"" x 12.75"". -- Spindle taper cat 40. -- Spindle speed 10,000 RPM. -- Spindle motor 20 HP. -- Tool magazine 24 [...] with: -- Haas control. -- 2 pallet changer. -- Thru spindle coolant. -- Programmable coolant. -- 1,000 PSI. more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. 8corlt3oy BROTHER TC-228 CNC Vertical Mill / Drill / Tapping Center -- X Travel (Longitudinal) 16.5"" -- Y Travel (Cross) 11.8"" -- Z Travel (Vertical) 9.8"" -- Rapid Traverse (X & Y Axes) 1417 IPM -- Rapid Traverse (Z-Axis) 1181 IPM -- Feedrate .2 - 394 IPM -- Table Working Surface 23.6""x11.8"" -- Spindle Horsepower 5 HP -- Spindle Taper #30 -- Approximate Machine Dimensions 62"" x 76"" -- Approximate Machine Height 102""... more
1
Elect./Voltage: 208 V Wjfhqtd9 HAAS DT-1 CNC Drill Tap Center -- X travel 20"". -- Y travel 16"". -- Z travel 15.5"". -- Table size: 26"" x 15"". -- Max. table load (evenly distrib.) 250 lbs. -- Spindle nose to table top 6"" - 21.5"". -- Rapid traverse rate all axes 2400 ipm. -- Cutting feed rate all axes 0.1 - 1200 ipm. -- Spindle speed 15,000 rpm. -- Spindle taper BT 30. -- Spindle motor 15 hp. -- Tool changer capacity 20+1 stations. -- Tool change time (chip to chip) 1.8 sec... more
1
Elect./Voltage: Bmf7p9li FOSDICK 4' x 15"" Radial Drill Specifications -- Capacity 4' x 15"" -- 5-3/4"" diameter spindle with #6 mt -- 36 spindle speeds 17 - 1800 rpm -- Feed changes .003 - .077 ipm -- Power clamping -- Power elevation -- Rapid on the head -- Work light -- Coolant system -- Motor 10 hp more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. 2xs0ounqc Dowell drilling machine for windows and door parts. The machine will handle a max. dimension of 140 x 250mm (4-3/4"" x 10"") using pneumatic clamping to hold the workpiece in position. Adjustable hole patterns are located on the program bar and set the drilling patterns your require. (8) different adjustable cylinder bore patterns can be approached.. -- Double sided boring for left and right hole patterns. Right and left side fences 1.2M with (2)... more
2
Suitable for mounting on frame to carry out various drilling operations [ no frame included.] 3 x 0.25kw motor driven, pneumatically stroked single spindle drills 72xhcdd3i 2 x Air drive, air stroked twin spindle drills Will consider split sale more
6
Drilling Machine Mas VR5A Drilling Machine MAS VR5A M3fmb Brand : Mas Capacity of SPINDEL : 70mm Arm: 1550mm SPINDLE : 50 MK Rotations : 28 ? 2.500 RPM Este slideshow necessita de JavaScript. more
5
MAS VO63 Radial drilling machine Drill press Mas VO 63 Gve2qc Arm: 2000 mm, Rotations: 11.2 ? 2000 rpm Drill press High Precision of slide. Made Czech Republic Este slideshow necessita de JavaScript. more
6
Radial Drilling Machine ? Meuser Itfyhud Radial Drilling Machine ? Meuser Brand: Meuser Germany Arm: 1250mm With Table. Este slideshow necessita de JavaScript. more
6
Radial Drilling Machine Z3050X16I Sold Radial Drilling Machine Z3050X16I Arm: 1250mm With tilting table. Baqn0n78xr Este slideshow necessita de JavaScript. more
4
Radial Drilling Machine Magdeburg Radial Drilling Machine Magdeburg Curse : 2,5 m Arm : 1.6 m With table Made : Germany Este slideshow necessita de JavaScript. 93lnv79ya more
4
Line has got 2 throughfeed drilling machines Weeke and a dowelinserter Koch 1st drill Weeke BST10/30, N° 0-251-01-0810, 1990 Equipment: 2 x hor. units, split drilling blocks, each with motor 1,5 kW 6 x bottom unit, split drilling blocks, each with 1,5 kW motor 2 x top units, split drilling blocks, each with 1,5 kW motor 11-spindle drilling blocks, centers 32 mm, vertical blocks swivelling 360° Min/max motor centerdistance: 160 - 544 mm Min drilling unit center distance: 192 mm F9lh2ioc 1870... more
6
Paper drilling machine (4 of heads 4 Available direct more
6
bore capacity in steel (diameter) 32,0 mm arm length 900 mm spindle taper MT 4 MK turning speeds 100 - 1.120 U/min table surface area 1200 x 580 mm dayligth 600 mm total power requirement 1,4 / 1,8 kW Blamp9a weight of the machine ca. 2.200 kg. more
5
bore capacity in steel (diameter) 32,0 mm arm length 1000 mm workpiece height max. 600 mm turning speeds 100 - 1120 U/min table: 1200 x 580 mm spindle taper MT 4 MK quill stroke 140 mm column diameter 200 mm engine output 1,4 / 1,8 kW feeds - fine adjustment 0,08 - 0,12 - 0,2 - 0,31 mm/min weight 2,2 To. Esirty8z range L-W-H 1,9 x 1,2 x 2,3 m more
2
bore capacity in steel (diameter) 50 mm bore capacity in steel (diameter) 50 mm throat 360 mm throat 360 mm bore stroke 240 mm bore stroke 240 mm thread dia. M 30 mm spindle turning speed range 42 - 2050 U/min thread dia. M 30 mm spindle turning speed range 42 - 2050 U/min no. of turning speeds 12 no. of turning speeds 12 feeds 0,1-0,2-0,3-0,4 mm/U feeds 0,1-0,2-0,3-0,4 mm/U spindle taper MK4 Guzte0 spindle taper MK4 table surface area 450 x 440 mm table surface area 450 x 440 mm Distance s... more
1
1 used drilling work plan slide Manufacturer: WMW Type: A150 Adjustable stroke: 150 mm for MK 6 complete diameter: 300 mm: weight: 50 kg Terms of delivery: free loaded terms of payment: prior to pick-up Snlrn2yce more
2
Spindle recording: MK5 Automatic feed rate in mm: 32, 45,63,90,125,180,250,350,500,700,1000, 1400 RPM M89bx more
6
bore capacity in steel (diameter) 35/45 mm throat 370 mm M3gkl bore stroke 200 mm spindle taper MT 4 MK table: 560 x 380 mm column diameter 150 mm turning speeds 81 - 1274 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 1,5 kW weight of the machine ca. 0,52 t range L-W-H 1,0 x 0,6 x 2,3 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for... more
6
bore capacity in steel (diameter) 60 mm throat 400 mm bore stroke 250 mm spindle taper MT 5 MK table: 700 x 600 mm column diameter 200 mm turning speeds 80 - 1210 U/min feeds 0,1 bis 0,6 mm/U total power requirement kW weight of the machine ca. 0,85 t range L-W-H 1,1 x 0,7 x 2,6 mm Mze7f • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill fee... more
1
bore capacity in steel (diameter) 40 mm throat 350 mm bore stroke 180 mm Cu3hti80 spindle turning speed range 50 - 1450 U/min thread dia. M 24 mm feeds 0,1 - 0,2 mm/U spindle taper MK4 table surface area 550 x 550 mm Distance spindle/table max. 600 mm distance spindle/base plate 1200 mm voltage 400 V / 50 Hz total power requirement 2 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,2 x 0,7 x 2,4 m • Cooling system, Thread cutting device, • rotating and tilting table, • adj... more
3
Threading, thread-cutting machine, threaded drill integrated gearbox with reverse-pneumatisch powered -Max cutting power M6 Weight 3.5 kg Y2pxddhh more
5
Drilling machine, drilling machine, vertical drilling machine, drilling machines, column drilling machine Spindle mount MT 3 Ut3efnyr9 Transmission Drilling machine with drill automatic rapid traverse Tapping automatic Table size 450 x 360 mm Unloaded 285 mm Spindle stroke 150 mm Speed 180-2000 R/min -Vorschub 0.08 0.32 mm / Rev Dimensions 900/1000/H2100 mm Weight 840 kg more
5
Olive drill, pot band drill, fitting drill Qktir8279 Drill number 8 pieces Drill bit in the opposite direction Recording right drill Ø 10 mm Recording drills left Ø 11 mm Drawing hole pattern in the photos Weight 150 kg more
6

Drilling machine NOTTMEYER NB 95

Düsseldorf Germany
6383 km
2003
used
Offer
Another 35 days
Dimensions (l x w x h) approx.: 5300 x 2100 x 2200 mm Weight approx.: 5784 kg Description: AUTOMATIC THROUGH-FEED BORING MACHINE. GENERAL SPECIFICATIONS. Working area in 'X' axis: 250-3.500 mm. SYSTEM AND OPTIONALS OF THE PANEL HANDLING. Nr. 5 pression units. Regulation of the measurements of the backstops in automatic by command board. BORING UNITS. Nr. 7 bottom vertical units. Nr. 2 (1+1) horizontal units. 'Quick change' system of the drilling heads. Digital displays that indicate: - 'X' axis ... more
6
working lenght min.: 170 mm working lenght max.: 1500 mm working width min.: 20 mm working width max.: 250 mm material clamping: ja / yes control: SPS Dimensions (l x w x h) approx.: 18000 x 2450 x 2700 mm Baks2axgae Weight approx.: 6000 kg Description: The well-kept and excellently equipped RILESA / H&amp,M Chop Saw- &amp, Through-feed Drilling Machine consists of three machine components. Technical data and equipment: H&amp,M HM-D chop saw with rod feeding system - Workpiece length input... more
6
Dimensions (l x w x h) approx.: 41000 x 6300 x 4500 mm Weight approx.: 30000 kg Description: Can used for profiles: -length 2500 to 16000 mm. -rectangular pipes: 80x40 mm. up to 900x450 mm. drilling: 2 horizontal spindles and 1 vertical with 7,5 kW power with 1000 rpm speed, sawing: -90º cut: 80x10 to 915x450 mm., -45ºcut: 620x450 mm., Bbkdujyyrc -Speed 20-100 m/min. -max workpiece weight: 5,4 t. more
1
Drilling capacity in steel St 60 45 mm drilling capacity in GG 22 55 mm Drilling capacity 60 mm spindle mount MT 4 Table clamping plate 630 x 500 mm Throat depth 400 mm Speed range, infinitely 63-2000 RPM spindle stroke 220 mm 4 feeds 0.1 / 0.2 / 0.3 / 0.4 mm / Rev Column diameter 180 mm maximum distance spindle/table 720 mm maximum distance spindle and base plate 1250 mm Power 2,2 / 3,5 kW dimensions L x W x H 700 x 1100 x 2250 mm Weight 640 kg Accessories / special features: • Cro... more
5
* first owner = prototyping - excellent condition * swiveling cube and bench vise max. drilling capacity in steel/cast iron = 75/90 mm min./max. throat = 440/1,500 mm boring spindle stroke = 380 mm spindle fixture = MK 5 spindle speeds = 19 - 1,900 rpm. feeds = 0.047 - 2 mm/r. spindle power = 7.5 KW weight appr. 6.306 tons Bave3vozwo L/W/H = 2,700/1,130/3,400 mm more


drill
every day

New machines via email!

Be informed!

to

to

Change search
DRILL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close