Used Drill Chuck for sale (8,395)

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth - automatic tool ejector - Movable intermediate table, fixed drill head Ibsdpfxon Ea Tzj Ap Dec - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual

Condition: new, Motor: 750W - 230V - 1 Phase Drilling capacity: 20 mm Spindle stroke: 85 mm Spindle taper: MK2 Number of speeds: 16 Spindle speed: 220-2840 rpm Work table: 305 x 305 mm Base: 460 x 280 mm Column diameter: 72 mm Overall height: 990 mm Weight: 60 kg Packaging: 820 x 500 x 290 mm Isdpfx Ajk Iuqysp Debc INCLUDED * Digital depth stop * CE protective shield * Laser guide * LED lighting * CE emergency stop * Drill chuck with MK2 taper * Ejector pin

Year of construction: 1994, condition: used, Dimensions: H = 1600 mm L = 1200 mm D = 1100 mm Isdpfx Aolp Iibsp Debc

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Ibodpfx Aom Rg Npjp Djc Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg.

Condition: used, used, refurbished, 24V-magnetic chucks (flat and sinetable) with and w/o water-cooling in dimensions - 400 x 150 mm - 500 x 200 mm - 600 x 250 mm Ibedpjc Szv Djfx Ap Dec new wire and plug subject to prior sale

Year of construction: 1986, condition: used, • Working length (mm): 3200 Ibode Drmxspfx Ap Djc • Drilling units: 3 from below, with a 3-spindle drilling head • Clamping cylinders: 2 from above • Pressure cylinder: 1 on the side • Control system: Siemens, newer model

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch Ibedokahu Uspfx Ap Dsc - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: like new (used), Year of construction: 1990, Drilling capacity in steel: 50mm Drilling capacity in cast iron: 63mm Spindle: MK4 Ibodpfxjg I I Eks Ap Djc Spindle Speeds: (12) 45-2000 RPM Drill head displacement: 350-1250mm Distance spindle base plate: 350-1420mm

Condition: new,

Condition: new, Drilling capacity in cast iron / steel ----- 28 / 25 mm Tapping capacity in cast iron / steel ----- 22 / 18 mm Motor ----- 1.1 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle taper ----- MK3 Drill table ----- 380 x 380 mm Base ----- 535 x 360 mm Maximum distance spindle - table ----- 825 mm Maximum distance spindle - base ----- 1220 mm Ijdpfx Aega T D Nep Dobc Weight ----- 210 kg INCLUDED * LED work light * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Various tools in a case

Condition: new, WMD25LV - 230V / 1Ph Drilling capacity in steel ----- 25 mm Milling capacity in steel ----- 20 mm Face milling ----- 63 mm Motor ----- Brushless 750W Spindle speed, continuously variable 50 - 3000 rpm Spindle stroke ----- 50 mm Spindle taper ----- MK3 Work table ----- 700 x 180 mm Cross travel ----- 150 mm Longitudinal travel ----- 490 mm T-slots ----- 3x12 mm Overhang ----- 170 mm Ibodpfxsga T Eis Ap Doc Distance spindle - table ----- 325 mm Weight ----- 160 KG STANDARD ACCESSORIES * Drill chuck incl. chuck key * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Box with various tools OPTIONAL * Base cabinet € 249.00 excl. VAT

Condition: new, Motor ----- 1100W - 400V - 3-Phase Drilling capacity ----- 32 mm Spindle stroke ----- 120 mm Spindle taper ----- MK4 Number of speeds ----- 12 Spindle speed ----- 150-2450 rpm Work table ----- 470 x 420 mm Base ----- 580 x 430 mm Column diameter ----- 92 mm Overall height ----- 1720 mm Weight ----- 128 kg Packaging ----- 1430 x 660 x 320 mm INCLUDED * Digital depth stop * CE guard * Laser device * LED lighting * CE emergency stop Iedpfx Apoga T Hrs Dobc * Drill chuck with MK4 taper * Ejector pin

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 70 - 3200 U/min 520 mm 230 mm table surface area 730 x 210 mm connected load frequency 400 V total power requirement 1,1/1,5 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,1 x 0,9 x 1,15 m domestic equipments Ibsdpfefv H Hqox Ap Dsc • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel (diameter) 40 mm throat 290 mm bore stroke 130 mm spindle taper SK 40 spindle turning speed range 75 - 3200 U/min 500 mm 230 mm table surface area 720 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm Iodpfxofv H Hue Ap Dsbc total power requirement 1,1 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional.

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector Ibodpfx Asfg U Tpsp Dec - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, bore capacity in steel (diameter) 50 mm bore capacity in cast iron (diameter) 60 mm threading cutting capacity: M36 throat 400 mm bore stroke 230 mm spindle taper MK 4 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 54 - 1032 U/min transmission ratio 12 Stufen column diameter 200 mm table surface area 550 x 550 mm total power requirement 3,0 kW Ibjdpfx Aofg U Ttjp Doc weight of the machine ca. 0,72 t dimensions of the machine ca. 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Isdpfx Aefimg Hsp Dsbc Diameter 250 mm 4 individually adjustable jaws Mounting: Long taper, diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm Overall length with flange and jaws 193 mm Weight 29 kg Age is estimated.

Condition: excellent (used), Year of construction: 2012, Four-jaw chuck Manufacturer: Röhm Diameter: 315 mm Ibodpfx Apjfklf Uj Doc Bolt circle: 120 mm Individually adjustable jaws Centering bore: 120 mm Pitch: 625/4 threads per inch

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Iedjttriwepfx Ap Djbc Maximum spindle speed 2000 1/min

Condition: excellent (used), Four-jaw lathe chuck Iedpotuvnyjfx Ap Djbc (2859) Make Klopfer diameter 300 mm Short taper size 6 Taper diameter 106.39 Pitch circle diameter for stud 133.4 mm Chuck height 110 mm

Condition: excellent (used), Tapping attachment Type Efem Isdpfx Aot R S Avsp Djbc MK 3 (28520) Shank diameter on tap 21 mm Automatic right - left run Total length 285 mm Diameter 109 mm Weight 7.5 kg

Condition: excellent (used), 1. Permanent-magnet chuck, D = 315 mm, with mounting flange according to DIN 55027, size 6. Iedpfxed Eaauj Ap Debc

Condition: new, bore capacity in steel (diameter) 40 mm Ijdpoupw Uzsfx Ap Debc throat 275 mm bore stroke 120 mm spindle taper MK 4 turning speed range 75 - 3200 U/min 190 mm 490 mm table surface area 700 x 210 mm connected load frequency 400 V diameter of hob max. 80 mm total power requirement 1,1/1,5 kW weight of the machine ca. 0,35 t dimensions of the machine ca. 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, bore capacity in steel (diameter) 16 mm throat 180 mm bore stroke 85 mm spindle taper MK 2 spindle diameter 47 mm spindle turning speed range 320 - 3300 U/min 230 mm 100 mm table surface area 420 x 155 mm connected load frequency 230 V Ibodpfjupxcyex Ap Dsc 900 x 600 x 300 cm total power requirement 0,75 kW weight of the machine ca. 8o Kg dimensions 0,7 x 0,7 x 0,8 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V weight of the machine ca. 10 Kg Ibodpfjupxdqsx Ap Dsc dimensions of the machine ca. 0,35 x 0,2 x 0,2 m