Column drill

IBARMIA 1B-35

Condition: used, Year of construction: 1977, centre height 200 mm centre distance 1.000 mm spindle turning speed range 1600 U/min spindle bore 42 mm Dwjdpfxeyv N Rks Apwea turning length 1600 mm turning diameter over bed 410 mm 230 mm machine weight ab. 1.700 kg dimensions 2000 × 1000 × 1500 mm

Condition: refurbished (used), LAGUN 19 Manual/conventional/universal fixed bed milling machine Table dimensions: 2,115 x 700 mm X-axis travel: 1,900 mm Y-axis travel: 950 mm Z-axis travel: 1,000 mm Electronic handwheel Fagor digital readout BT50 tool holder Hydraulic tool clamping Spindle speed: 28 – 1,800 rpm Feed: 0.25 – 88.60 Dwodpoxxkwuofx Apwja Automatic guideway lubrication Coolant pump and tank Spindle motor power: 15 kW Weight: 8,000 kg Dimensions: 3,600 x 2,700 x 2,650 mm

Year of construction: 2016, condition: as good as new (ex-display), End mill Manufacturer: Mitsubishi Dedofmxh Tspfx Apwjwa Type: AHX 640 W-315 CA28 R Diameter: 315 mm Weight: 31 kg

Year of construction: 2016, condition: as good as new (ex-display), Planing cutter Dodpfx Apefmch Iewewa Cutting head Manufacturer: Mitsubishi Type: AHX 640 W-315 CA28 R Diameter: 315 mm Weight: 31 kg

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, complete wheels Dodpfx Apsw Slmlewowa -Manufacturer: Continental, tire IC70 with rim -Tire size: 7.00 R 12 16 PR / 7.00 R 12 136 A5 -Bolt circle: Ø 170 x 18 mm -Recess: Ø 138 mm -Dimensions: Ø 650 x 190 mm -Weight: 38 kg

Condition: used, Year of construction: 2016, functionality: fully functional, Conventional guide and lead screw lathe for heavy-duty machining of large workpieces. With a 1000 mm turning diameter over the bed and a 4000 mm distance between centers, the Kraft BV-40160 covers the entire spectrum from long shafts to heavy flanges. DRIVE & SPINDLE - Main motor 22 kW with frequency inverter, stepless speed control 6–800 rpm in 4 gear stages - Spindle bore 180 mm, spindle nose A2-15 - Turning diameter in the cross slide 1280 mm for single parts CAPACITIES - Turning diameter over bed: 1000 mm - Turning diameter over cross slide: 710 mm - Distance between centers: 4000 mm - Center height: 500 mm - Bed width: 560 mm (3 V + 1 flat) TAILSTOCK - Quill diameter 125 mm, stroke 250 mm, taper MK6 THREADS & FEEDS - Lead screw diameter 60 mm - Metric threads 0.8–14 mm, inch 2–28, module 0.4–7, DP 4–56 - Longitudinal feed 0.05–0.84 mm/rev - 4-position tool holder, tool shank cross-section 40 mm Dwedpfxjzpfgfj Apwja TECHNICAL DATA - Year of manufacture 2016 - Net/gross weight 9000 / 9700 kg - Dimensions (L×W×H) 5845 × 1950 × 1925 mm - Connection 400 V, 50 Hz, 3 phases CONDITION Used, operated for less than one shift. Located near Nuremberg, available for inspection while powered on. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - Faceplate (spindle nose A2-15) - Steady rest / follower rest - 4-position tool holder - 2-axis digital readout (DRO) - Tailstock with center Price on request. We will be happy to advise you – competent consulting and nationwide service.

Condition: as good as new (ex-display), Year of construction: 2019, bore capacity in steel (diameter) 35,0 mm bore capacity in cast iron 40,0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2.170 mm 2019 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display Dedpjxaabrjfx Apwjwa - Height-adjustable protective cover

Condition: ready for operation (used), Year of construction: 1987, Recooling capacity at water flow temperature of 15/10°C: 2.3/2.1 kW Volume flow: 0.5 m³/h electrical Connection: 380 V, 1 kW Dodpfxsr Ezdre Apwjwa Space requirement: 900 x 600 x 1020 mm Weight: 160kg Water connections reduced to 1/2".

Condition: new, bore capacity in steel (diameter) 40 mm bore stroke 190 mm Dwodpfeyv Nr Uox Apwea turning speeds 50-1800 U/min Short spindle MK 4 Table dimensions 500x400 mm total power requirement 2,2 kW weight of the machine ca. 330 kg dimensions of the machine ca. 670 x 500 x 2120 mm