Serial No. S231260
Max Thickness 20mm
Pre Bending 16mm
Roll diameter Top & Bottom 350mm, side rolls 260mm
Roll adjustment Hydraulically
Input 415/3/50hz, 22kW motor
Rolling speed Two speeds
Actuated via Moblie control panel
Fitted with Hydraulic sheet support, hydraulic drop end, safety trip cable
Features DRO to all three adjusting rolls to indicate roll position
Nett weight actual. 14,770 Kgs. / 14.5 Tons. more
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving coil instruments, moving coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, combination measuring device with data logger
-ALMEMO 2890-9 precision measuring device and data logger
-9 inputs 2 outputs
-with transport case
-Dimensions case 340/270 / H80 mm
-Weight 2.2 kg more
Presetting and Measuring Device
Type Hyperion H250 F3
Setting range Z-Axis 250 mm
Setting range X-Axis 250 mm
Tool holding fixture
Universal taper HGH-UZ ROD
can be clamped in any position and locked 4 x 90° to hold tool posts for steep tapers, hollow shank tapers with power-operated clamping via clamping elements.
Operation of the pneumatic functions via membrane keyboard.
Max. rapid traverse 17.000 mm/min
Available Tool posts
1 x tool post HS... more
vacuum lifting device, vacuum lifter
Custom-made handling device for an industrial robot
Year of manufacture 2008
Load capacity approx. 60 kg
Suction foot distance min. 120 x 150 mm
Suction foot distance max. 700 x 600 mm
- 4 pieces suction feet Ø 100 mm
- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection Ø 8 mm
- 2 cross beams, width adjustable from 150-600 mm via servo drive
- suction foot distance adjustable from 120-700 mm via 2 servo drives
- Suction foot ad... more
cutting range for steel to 4,0 Trennschnitt mm
cutting range for steel to 6,0 Qualitätsschnitt mm
cutting medium Druckluft
capacity at 100% 7 - 25 stufenlos A
Air consumption 45 lt/min. bei 5 bar l/min.
range L-W-H 425 x 210 x 390 mm
weight 17 kg more
Plasma cutting device MB - welding type plasma Prof 50
Identical as CEBORA
Masch. No. 244311 built in approximately 1992
Power 50 amp. = 35% ED
30 amp. = 100% ED
Setting range 2 levels
Package length 6 meters
Compressed air connection 4.7 bar
Power supply 400 Volt, 50 Hz, 32 amp. Plug
Dimensions L x W x H 500 x 350 x 700 mm
Weight 80 kg
good condition more
cutting range for steel to 20,0 Trennschnitt mm
cutting range for steel to 15,0 Qualitätsschnitt mm
capacity at 100% 60 A
cutting medium Druckluft
Air consumption 160 lt/min. bei 5 bar l/min.
range L-W-H 480 x 540 x 920 mm
weight 75 kg more
max. width of grinding wheel 80 mm
max. dia. of grinding wheel 320 mm
total power requirement kW
size of template table 320x320 mm
weight of the machine ca. 200 kg
dimensions of the machine ca. m
Diaform dresser for cylindrical grinders
Handling device, handling system JÄGER HANDLING
Type: Handy-flex 200
horizontal movement: 450 mm
vertical movement: 600 mm
Load capacity: 4 to 10 kg
Throat: 150 to 600 mm
guide column vertical: Ø 25 mm
Guide columns horizontal: Ø 16 mm
tool holder: 33 x 33 mm screw clamping
- Movable in three axes (horizontal, vertical, rotary)
- Rotary encoder KÜBLER for rotary motion Type 8.5873.5320.B311.S003
- Position transducer BALLUFF for horizontal movement Type BTL6-A110-M0450-A1-... more
Used stacking device Brand: Meinert Type: AM 35 Year: 1990 Technical data: for single- and multi row stacking of panelswithout stop at stack change. Workpiece length:max. 2.500 mmmin. 270 mm Workpiece width:max. 1.000 mmmin. 240 mm Workpiece thickness:max. 40 mmmin. 13 mm Working height: 960 mm Stack height:up to 1.600 mmStacking on protection boardsStack width: max. 1.200 mmSupernatent of protection boards: up to approx. 50 mmCapacity: up to 25 working cycles/min.(collecting at infeed allows t... more
Feeding technology, feeding device, storage container with automatic feeding, spiral conveyor, vibrating bowl, vibratory conveyor, vibratory conveyor
-Automatic feeder with storage container
-without rivet gun
-is sold as a spare part carrier
turning diameter ca. 100 mm
turning length 100 mm
number of slides 2
spindle hollow 42 mm
face slide travel 55 mm
turning speed range max. 5000 U/min
greates pass round over bed 240 mm
feed speeds 20 - 400 mm/min
rapid speed 6 m/min
total power requirement 2,2 kW
weight of the machine ca. 1,1 t
range L-W-H 2,80 x 1,20 x 2,00 m
with connector field control more
Plasma cutter of Harris type plasma cutting H 35 A Masch. No. 012351622947 built in approximately 1994
Performance 35 amp.
Cutting capacity approx. 4 mm hose package length approx. 7 meters
Compressed air connection approx. 6 bar
-with pressure reducer
Power supply 380 v, 50 Hz
Dimensions L x W x H 550 x 400 x 960 mm
Weight approx. 50 kg
Used unitCondition: Function testedEquipment and technical data:Filling quantity: 60 lExhaust air volume flow: 280 l/hMax. Max. load: 60 kgCompressed air connection: max. 4 barLocation: High availability: Short term
Marking device for folding machine DESTA ZM 900
Year - - Serial-No. 529
-We would be very pleased with your visit - more machines on Stock-
-Can be inspect-
-On Stock Emskirchen / NÃ¼rnberg - Can be tes more
swing dia. over long. slide mm
spindle turning speed range U/min
diamond disc diameter mm
total power requirement 1,5 kW
max. width of grinding wheel 50 mm
max. dia. of grinding wheel 400 mm
weight of the machine ca. 0,35 t
dimensions of the machine ca. 1x1x1,3 m
Pre-Dressing Device for Gear Grinding Wheels
Vibration conveyor/ sorting device KNÖLL
with infinitely variable control Type: KSE2
[...]: KS-2.5 0037
Mains connection: 220 volts, 50 Hz, 1.3 kVA
Diameter outside: 320 mm
Diameter inside: 280 mm
Total height: 400 mm
with sorting track and lifting floor
Weight: 50 kg more
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance .
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
Try our app for used machines now!
Machineseeker app for iPhone and Android.