Used Jaws for sale (3,288)

Condition: like new (used), functionality: fully functional, Clamping elements Dimensions, W x D approx. 100 x 150 mm Overall height 91.5 mm Jaw width 30 mm Kodpfjz Td A Eox Aqrjnc Lowest support height on jaws 68.5 mm Middle support height 80 mm Clamping height per jaw approx. 11.5 mm Jaw clamping travel approx. 25 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, 600 mm lathe chuck for sale, used only once. Hydraulic 4-jaw. Kjdpfjzgc Uzjx Aqronc

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Used Parker 0745 Hooklift Jaw Crusher Year 1997 CAT Engine (Reconditioned) Ksdoz Nllgopfx Aqronc New Main Hydraulic Pump 700 x 450 Jaw Opening Jaw Liners 80 - 90% Good Grizzly In Very Good Condition Very Nice Unit. Ready To Go Straight To Work.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 20 mm -Attachment: Material steel -Dimensions: see photo technical drawing Kedpfx Aqoz Tflherenc -Transport dimensions: 200/90/H85 mm -Total weight: 2.6 kg

Condition: excellent (used), outer diameter: 400 mm, Used hydraulic 3-jaw chuck from the Italian manufacturer SMW, model Autoblok 400BH. The set includes the parts shown on the attached photos: chuck, clamps, screws, and hard jaws Kjdpjz Rlx Nsfx Aqrsnc

Condition: used, Year of construction: 2005, functionality: fully functional, RAKO 12-Jaw Precision Clamping System Ø 1,600 mm with Extensive Jaw Set (2 units in stock) Manufacturer: RAKO GmbH, Gelenau Manufacturer's designation: 12-Jaw Chuck Year of manufacture: 2005 Documentation date: 2006 Drawing number: 0684.00-00 Article number: MPT-1023 / 1024 Offered is a used, stationary RAKO 12-jaw precision clamping system for mounting on a fixed machine table. The clamping system was used for machining brass cages for ball and roller bearings. It is not a conventional turning chuck for a machine spindle, but rather a permanently mounted workpiece clamping device. The design features twelve basic jaws arranged radially and evenly around the circumference. This distributes the clamping force over numerous contact points. This clamping principle is particularly suitable for large, ring-shaped, thin-walled, sensitive, or easily deformable workpieces. According to the existing manufacturer's drawings, different jaw positions are possible for internal and external clamping. The clamping system has an outer diameter of approximately 1,600 mm and a weight of approximately 2,000 kg. Scope of delivery - RAKO 12-jaw clamping system, Ø approx. 1,600 mm - twelve radially arranged basic jaws Kodpfjzx D A Dsx Aqrsnc - extensive set of various clamping and adapter jaws - different interchangeable and clamping elements - additional fastening and accessory parts as shown in the images - separate wooden crate with jaws and accessories - original RAKO operating manual - overall, section, and detail drawings - drawings of various clamping positions The exact quantity and assignment of all jaws and accessories have not been finally determined. The scope of delivery is based on the images. Condition Used condition with signs of wear and tear due to age and use. Scratches, dirt, discoloration, and, in some places, slight surface rust or corrosion can be seen on the clamping system and individual accessories. Technical data - Outer diameter: approx. 1,600 mm - Weight: approx. 2,000 kg - Number of basic jaws: twelve - Jaw arrangement: radial and even - Clamping options: internal and external clamping - Jaw stroke: 28 mm according to drawing - Total clamping force: approx. 190 daN at 35 Nm actuating torque - Maximum torque on the actuating spindle: 100 Nm - Locking air: present - Maximum locking air pressure: 5 bar - Lubrication: on the twelve basic jaws and the actuating spindle - Transport: three threaded holes M30 for crane screws Mounting on the machine table According to the RAKO operating manual, mounting is done with 14 cylinder head screws M20 × 180 according to DIN 912, strength class 10.9. The specified tightening torque is 300 Nm. Jaws and accessories The scope of delivery includes an extensive range of different clamping and adapter jaws. Documented, among other things, is an adapter jaw H41 with drawing number 0721.02-03 and a finished size of 55 × 50 × 46 mm. Dimensions of clamping system: approx. 1,600 × 1,600 mm Height: to be determined Weight: approx. 2,000 kg Total shipping weight: over 2,000 kg plus accessories and packaging

Condition: ready for operation (used), * Brand: ABM / Bergeaud Ksdpfx Ajz Uz Insqrenc * Type: jaw crusher * Feed opening: 450 x 250 mm * Incl.: E-motor and basic chassis

Condition: new, functionality: fully functional, overall weight: 8 kg, chuck outer diameter: 500 mm, three-jaw chuck diameter: 400 mm, jaw width: 45 mm, construction height: 57 mm, As-new base jaws Manufacturer: SCHUNK Type: SFG400 (helical gearing) Condition: "NEW" with M16 x 1.5mm screws Technical data: Width B: 45mm Length L: 160mm Height H: 57mm Cross slot N: 30mm Web S: 18mm Hole spacing L: 60mm Price plus shipping; Weight approx. 7.5 kg/set ----- International customers please inquire about shipping costs Kodpoz Tc Rnefx Aqrenc ----- Further base and top jaws can be found in our online shop: ----; WK-Sales.de

Condition: good (used), Year of construction: 2020, Hydraulic 3-jaw chuck, manufacturer: SCHUNK, type: TFH 500-160, year of manufacture: approx. 2020, in good condition. Knjdpfx Aozty Rgeqroc Includes 2 chuck keys and 3 pairs of jaws. Diameter: 500 mm, height: 150 mm. Bore in the front area of the chuck: diameter 160 x 65 mm, depth. Short taper DIN A 8 in the flange, thread in the chuck for tensioning rod (approx. M 100 x 2). Weight approx. 180 kg without jaws. The chuck is in good condition. The chuck was previously installed in a MORI SEIKI SL 6 or SL 603.

Condition: used, functionality: fully functional, Jaw crusher with oscillating jaw Inlet: 1,000 x 200 mm with smooth crushing jaws Knedpsw U Thcjfx Aqrsc with electric motor and steel base frame

Condition: like new (used), functionality: fully functional, Hydraulic 3-jaw chuck, Samchully, diameter 300 mm and diameter 400 mm, and hydraulic clamping cylinder, type: Y-1550 RE. Sold individually or as a set! Knedpfxjzy Egmj Aqrsc

Condition: excellent (used), Year of construction: 2017, operating hours: 500 h, functionality: fully functional, machine/vehicle number: SEOM CAS50, overall weight: 800 kg, chuck outer diameter: 1,250 mm, three-jaw chuck diameter: 1,250 mm, bolt circle diameter: 463 mm, total height: 180 mm, outer diameter: 1,250 mm, cone mount: 520 mm, cone diameter: 520 mm, spindle bore: 520 mm, rotational speed (max.): 500 rpm, Seoam CAS50 Chuck, like new with less than 500 hours of usage. See images (with rust preventative applied). Kodpfxez Erq Ts Aqrsnc

Condition: good (used), functionality: fully functional, 315 mm and 250 mm chucks, with central adjustment and individual adjustment of the clamping jaws, Knjdpfx Aqjzz Amterec

Condition: ready for operation (used), * Brand: Neyrpic * Type: jaw crusher * Feed opening: 500 x 350mm Knsdpfxsz Syxme Aqrjc * Incl.: E-motor 22 kW

Condition: like new (used), including additional supports Ksdpfxoz E H Hvj Aqrsnc

Condition: good (used), 3-Jaw Spiral Chuck Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws • 1 chuck key Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Kodpfxepmtgns Aqronc DE - 44143 Dortmund - Wambel

Condition: excellent (used), 3-jaw CNC power chuck, e.g. for a HYUNDAI-KIA SKT 100 M Diameter: 150 mm Spindle mount: A 2-5 Speed range: max. 6,000 rpm Through bore: 42.5 mm Weight: 8 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Knedpfew Elp Ijx Aqrec

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Kjdpfoy Apncex Aqrsnc Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: good (used), Manufacturer: unknown Diameter: 400 mm Mounting: KK 6 (116 mm) Fastening: 4 bolts, bolt circle 135 mm, spacing 95 mm Kodpfx Aj Acihqoqrsnc Through-hole: 100 mm Height: 105 mm Accessories: Interchangeable jaws Weight: 67 kg

Condition: good (used), 3-jaw power chuck with safety pin RÖHM Duro 400 Kedpfjwxprtox Aqrsnc Diameter 400 mm Spindle mount DIN 55027 size 11 Weight approx. 105 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), overall weight: 60 kg, Three-jaw chuck Ksdpfx Ajzw U Steqronc Manufacturer: Forkhardt Model: F 315 Diameter: 315 mm Height: 120 mm Jaw height: 175 mm Weight: 60 kg

Condition: good (used), 3 sets of used soft one-piece clamping jaws for 3-jaw spiral chuck BISON 630 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Knedpfxjwz Ikmo Aqrjc

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks Kodpfx Aszlc Dmeqrjnc -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 4 sets -Jaw width: 20 mm -Attachment: Material: Aluminum -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 350/300/H75 mm -Total weight: 9.2 kg

Condition: used, Manufacturer: Jászberényi Aprítógépgyár Type: PE VI Orifice: 600x350 mm Max size of the delivering size: 550x300 mm Outlet size: 30-80 Kjdpfxsy Ayb He Aqrsnc Power of motor: 22 kW Weight with motor: 6,6 tons Overall size: L=2338 mm x W= 1655 mm x H= 1820 mm Detailed technical specifications are shown in the attached photos. The equipment is currently in disassembled condition. It is offered exactly as shown in the pictures. All components are available and the machine can be fully reassembled.

Condition: used, HWR InoFlex VL 160 - 4-Jaw Manual Chuck 4-Jaw Manual Chuck, weight-optimized with centrifugal force compensation Type / Model: HWR InoFlex VL160 Condition: Used Technical Data: Base chuck: VL100 Diameter: 1600 mm Stroke per jaw: 11.3 mm Compensation stroke per jaw: 9.3 mm Max. spindle clamping torque: 320 Nm Max. clamping force: 180 kN Max. speed*: 480 1/min Mass of extension set: 300 kg Moment of inertia: 129 kg·m² Max. workpiece weight: 600 kg Standard T-slot: GP13 * Balancing quality according to DIN ISO 1940-1: G 6.3 (unlubricated) For larger workpiece weights, support on the chuck body is required. Equipment: - Includes 8 sets of jaws Inquiry item: Transport costs in a customized offer. Kodpfjzulacsx Aqronc