Used Teeth Bewel for sale (535)

Condition: reconditioned (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp Hedpozx Rz Tjfx Ak Uenu - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Hnjdpfx Asz Rqcmek Uou Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25667, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Hnedpjy Tybnsfx Ak Uju Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Technical data for bandsaw blades: Hnsdpfx Asz Hdqbok Ueu Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. Hedpfxez Ikz Aj Ak Uonu The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: used, Year of construction: 1980, Used vehicle Hjdpfxezzhgls Ak Uenu Vehicle no. 3401, Fiat-Allis FL10B tracked excavator, year of manufacture approx. 1980, 2.100 bucket with teeth, 400mm steel tracks, cabin, protective grille. For inquiries, please contact or 1787043227. Errors and prior sale excepted.

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. Hnjdpfx Ajq Nga Uok Uju 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: good (used), Year of construction: 2021, Empty weight: 620 kg Dimensions of cargo space: 279 x 89 x 126 cm Technical condition: good Visual appearance: good Production country: NL Please contact Christian Theißen for more information Manufacturer: Vermeer Corporation Model: Stump Cutter SC362 Year of build: 2021 Condition: Used Data: Drive type: 35 PS Performance: 21,1 kW Fuel type: Benzin Number of milling teeth: 16 Milling height: 61 cm Milling radius: 119 cm Milling depth: 38 cm Transport dimensions LxHxW: 2,79 x 0,89 x 1,26 m Empty weight: 620 kg Hjdpfx Akez R S I Sj Usnu Special features: Caterpillar drive Price on demand Location: 41468 Neuss Available immediately

Condition: used, Year of construction: 2003, Liebherr LC120 Gear Hobbing Machine 3mm maximum hobbable module 1,500 rpm maximum hob speed90mm maximum hob diameter 200mm maximum hob lenght 45 hob head swivel angle 4 mimimum number of teeth 120mm maximum workpiece diameter 250mm maximum axial travel 145mm table diameter Hodjz Stlaspfx Ak Usnu 250rpm maximum table speed 17kN load capacity 30mm tailstock travel 17,000mm/min rapid traverse 13kN tailstock holding force 775879h working hours

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm Hnsdpfx Akjz Idb Ne Usu - Teeth: 24

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Hsdpfjfnk Ehox Ak Ujnu Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Year of construction: 1997, Equipment: all wheel drive, Very nice wheel loader – ideal for storage areas, etc. Bucket with teeth, approx. 2.3 cubic meters Weight approx. 12.5 tons With central lubrication system – interior and exterior in top condition! Hsdpfx Aoy U Szisk Uonu Bucket pivot point approx. 3.80 meters 6-cylinder engine 3-speed powershift transmission Tires approx. 70% good We can offer you transport to your location. Sale only to commercial businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be considered as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of a purchase agreement. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a trouble-free transfer abroad.

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) Hnedpfx Akoz E Spcs Uju + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: repair required (used), Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Hnjdpfx Akoy D Nice Ueu Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Hsdszxpkmjpfx Ak Usnu

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Hjdpfx Asz E Hx Ssk Ujnu Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Hodpfxoxx Tigs Ak Uenu Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 like-new manual plate seat re-grinding machine, Petschauer PLT800, with a cutting-off device for repairing HM teeth on circular saw blades with a diameter of 100 to 800 mm. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding of the plate seat after unsoldering with a ceramic grinding wheel, 175 mm Ø and 4 mm wide, with an adjustment scale from 15° negative to 35° positive, with blade thickness adjustment. Left side: Cutting off teeth that are too long with a diamond cutting disc, 150 or 175 mm Ø, approximately 1 mm wide. Adjustment scale for back clearance angle, 15° negative to 35° positive. The cutting-off process is performed at a 0° axial angle. Additional applications: Setting the tooth back Setting the raker on CMT saw blades Breast grinding using a diamond grinding wheel Re-sharpening on the saw blade circumference at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Ø Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm, Depth: 72 cm, Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Ø Hnjdezz Rlkjpfx Ak Uju Diamond cutting disc: 150 or 175 mm Ø Operating voltage: 230/400 Volt, 3 phases, 50 Hz or 230/440 Volt, 3 phases, 60 Hz Protection: 3 slow-blow fuses, 10 A

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6560308, Refurbished Kirschner LK 700 soldering unit. Hjdpozltitefx Ak Ujnu Machine for fully automatic soldering of carbide/PCD teeth onto circular saw bodies. All relevant attachments are NEW and can be documented with an invoice. The machine can currently be inspected while powered on.

Condition: used, Year of construction: 2011, • Cutting length: 4,200 mm • Motor: 11 kW (15 HP) • High cutting precision thanks to the free-standing, torsion-resistant steel frame and carriage guidance running on oversized, hardened and ground round steel rails. • Infinitely variable feed speed controlled by foot pedal over the entire cutting length. • Feed speed: 1–80 m/min • Saw spindle speed: 2,900 rpm • Maximum cutting height with Ø 600 mm saw blade: 190 mm • Maximum cutting height with Ø 400 mm saw blade: 90 mm • Rip fence and machine table. • Rip fence adjustment via multiple control levers on the front of the machine for precise positioning, with a large digital readout. The fence can be easily rotated and tilted. • Rip fence adjustment range up to 800 mm. • Control system o Electronic machine and fence control (PLC control) with an easy-to-read touchscreen. • Swivel-mounted control panel on a swing arm. • One 30 mW red laser for displaying the cutting line. • Fast and safe saw blade change using the "Easyfix" quick-clamping system. • Safety guard with automatic opening assisted by two gas springs. • One carbide-tipped saw blade: 450 × 4.4 × 80 mm, Z=40 teeth. • Saw blade bore diameter: Ø 80 mm. • Electrical equipment o Control cabinet integrated into the machine frame. • Connection data o Upper right extraction port: Ø 160 mm Hodpfjzkkf Aox Ak Usnu o Lower left extraction port: Ø 160 mm o Extraction air velocity: 30 m/s o Total air requirement: 4,340 m³/h o Compressed air supply: 6–8 bar • Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: ready for operation (used), Year of construction: 1989, CSEPEL GEAR GRINDER FKA 326-10 – 2 units available THE MACHINE USES THE FASSLER DRESSING METHOD. • Gear diameter: 320 mm • Module range: 0.5 – 6 • Slide stroke: 180 mm • Number of teeth: 10 – 260 • Max workpiece weight: 80 kg Hodpfozxzliox Ak Usnu • Clamping length: 420 mm MACHINES ARE COMPLETE WITH NUMEROUS ACCESSORIES: WHEELS, WHEEL HOLDERS, FASSLER, CHANGE GEARS Machines are in working order!

Condition: used, Year of construction: 2010, operating hours: 10,468 h, Equipment: all wheel drive, Variable boom, twin tires, used vehicle. Vehicle no. 3439, Atlas 150W mobile excavator, year of manufacture: 2010, operating hours: 10,468, variable boom, air conditioning, Deutz diesel engine with 85 kW, tire size: 10.00-20, twin tires with spacer rings, dozer blade, radio, hydraulic connections for attachments, Lehnhoff MS10-3 mechanical quick coupler, 1 x TL 1,200 mm with teeth. For inquiries, please contact us. Errors and prior sale are subject to change. Hnsdpfx Akjzz Umlj Uju

Condition: excellent (used), Year of construction: 2005, operating hours: 6,701 h, functionality: fully functional, overall weight: 19,000 kg, Doppstadt DW2560 Buffalo/Shredder/Chipper/Crusher/Slow-Speed Machine • Manufacturer: Doppstadt • Type: DW2560 • Year of manufacture: 11/2005 • Magnetic tape • Operating hours: 6701 hours • Engine: Mercedes Benz OM 442 Diesel engine • Slow-speed machine • Roller length: 2.5 meters • Roller diameter: approx. 600 mm • Roller: 17 teeth • Discharge height: 2.9 meters • Throughput: material-dependent, in the range of up to approx. 30 t/h • Remote control • Rear discharge conveyor • Transport length: 20 m • Transport width: 2.51 m • Transport height: 3.95 m • Total weight: 19000 kg • German machine • Immediately ready for operation • This offer is non-binding and without obligation. - Subject to prior sale, Hedpfjzz Sn Tox Ak Uenu - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times • The clearly arranged display also serves as an operating element via a touchscreen Hedpfjz Hdpwex Ak Uonu • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Condition: used, Year of construction: 1973, machine/vehicle number: 24109, Equipped with: Stock Divider Hydraulic Work Clamping Chip Conveyor Cutter Clamping Bolt Index Plate Change Gears Hydraulic System Coolant System Specifications: Min. Outside Cone Distance: 2.75" Max. Cone Distance: 10" Max. Gear Pitch Dia.: 20" Cutter Diameters Utilized: 9 - 18" Root Angle: 55 - 80 deg. Face Width: 3" Number of Teeth: 20 -75 Diameter of Taper Hole at Large End: 3-27/64" Hsdpfxsxdfa Uj Ak Usnu Taper Per Foot: .50" Depth of Taper: .625" Cutter Speeds: 6.8 to 16.5 RPM Feeds (seconds/tooth): 3 to 9 Main Motor: 5hp, 900 rpm Hydraulic Motor: 7.5hp, 1800 rpm Approx. Floor Space: 118" x 86.5" Needed Overall Height: 70" Approx. Net Weight: 16,000 lbs Shipping Weight Boxed for Export: 17,000 lbs