Used Track for sale (1,959)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, The dismantling is scheduled for calendar week 35. Until then, the buyer can inspect the system while it is in operation in Lithuania. Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS Edge banding machines HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ Workpiece width without edge, with workpiece thickness of 12–22 mm: min. 60 mm (depending on workpiece length) Workpiece width without edge, with workpiece thickness of 23–60 mm: min. 100 mm (depending on workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Gap-free joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Gap-free processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Lateral conveyor belt on the infeed table Electropneumatically controlled transverse safety device on the infeed table Manually adjustable infeed safety device Lhjdpfxsztazfo Adpok Set for small parts Integrated air cushion table Fixed stop on the left side at the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross conveying Controlled cross conveyor at the infeed Outfeed roller track Controlled cross conveyor at the outfeed Electropneumatically controlled stop protection device Lateral transport belt Manually adjustable panel overhang

Condition: like new (used), Year of construction: 2021, functionality: fully functional, load capacity: 2,000 kg, arm reach: 1,850 mm, controller manufacturer: ABB, controller model: IRC-5, IRB2600 on a track of 10m 2 x IRBP-L2000 4000 x 1800mm EWM Phoenix 452 Two wirefeeders with welding gun Tool exchanger Bulls-eye Toortsreiniger Lhodoxbd Ekepfx Adpjk Sensing with the wire ArcWelding Sensor Fence and safety curtains 2 clamping frames

Condition: used, functionality: fully functional, Year of construction: 1977, machine/vehicle number: MIKA666, Demag 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system. Load capacity: 500 kg Width: approx. 3.5 m, track gauge: approx. 3 m The undercarriage can be adjusted to fit the girder dimensions up to approx. 8-14 cm. Includes complete control system, floor-level operation via control box. 2 lifting speeds, Demag PK2 chain hoist, 2-strand, 500 kg load capacity. The crane is fully electrically movable in all 3 axes. Lifting height/hook travel: approx. 3 m Connection to 400V 16A Good used condition Lodpfx Adjzv Iybopjhk Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Ledpfjztc Tdox Adpehk Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196, Steel crane, overhead crane, bridge crane, industrial crane Load capacity / lifting capacity: 5t - 5000 kg Track gauge: 11200 mm, overall dimension approx. 11400 mm Year of manufacture: 2001 Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 2400 mm With floor-mounted control Crane is disassembled and available immediately Very good condition, see pictures Lhjdpfezv H Anjx Adpjk Column slewing cranes and wall slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Lhjdpfezu Shyox Adpok Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months.

Condition: good (used), Year of construction: 2007, Teupen Leo 30T Crawler Boom Lift / Crawler Telescopic Boom Lift, 30-meter working height, 2007 A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices, in AS-IS condition, without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Lhedpfxjzbt Dwo Adpjk 5391 LR Nuland

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN1403, Abus 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane track Payload: 1000 kg Width: approx. 6 m, gauge: approx. 5 m The undercarriage can be adjusted to fit the girder dimensions, up to approx. 10-16 cm. Includes complete control system, floor-level operation via control panel. 2 lifting speeds, newer Abus GM chain hoist, 2-strand, 1000 kg payload. The crane can be moved electrically in all 3 axes. Lifting height/hook travel: approx. 6 m Connection to 400V, 16A Ledpfx Adezv Enispehk Good used condition Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please request shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN1402, Abus 1-girder suspended crane, bridge crane, crane system, overhead crane, portal crane, suspended crane track Load capacity: 1000 kg Width: approx. 3.5 m, gauge: approx. 3 m The travel units can be adjusted to the girder dimension by up to approx. 10-16 cm. Includes complete control system, floor-level operation via control panel 2 lifting speeds, newer Abus GM chain hoist, 2-strand, 1000 kg load capacity The crane can be moved electrically in all 3 axes. Lifting height/hook travel: approx. 6 m Connection to 400 V, 16 A Good used condition Lhodpfx Aozv En Nsdpek Shipping via freight forwarder; collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will immediately provide you with a non-binding offer!

Condition: used, functionality: fully functional, Year of construction: 1999, operating hours: 142 h, Tracked asphalt paver Bitelli CAT BB 651 C Year 1999 Ljdpfxjzr Ezze Adpshk GVW: 14,500 kg Engine type: Deutz F5L 912 Working hours: 142 Good general condition WE CONSIDER TRADE-INS OF VEHICLES OF ALL BRANDS, MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, WITH CIFA, SERMAC, PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY CATERPILLAR, FIAT HITACHI, KOMATSU

Year of construction: 2019, condition: used, Chain crane with trailer Manufacturer: TGT Type: Robby 900 XL Year of manufacture: 2019 Technical data - Palfinger crane 1500 - Forklift lift of 1.8 m - Outriggers fully hydraulic - with KTL coating - installed on a crawler chassis - telescoping chassis width - Working height: approx. 6.5 m - Tare weight: approx. 1700 kg - Fork load capacity: 2000 kg - Crane load capacity: up to 900 kg - Quick-change system for switching between crane and forks - Honda engine Note: Lhsdpfxjzuz Nge Adpek The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: used, functionality: unexamined, mileage: 5,100 km, operation weight: 32,000 kg, Year of construction: 2007, operating hours: 8,000 h, Powerscreen Chieftain 1800 Double-Deck Screen 2007 Double-deck - 3 fractions, the screen for sale will have an additional fourth conveyor Lhodpfszii Tiox Adpjk Two independent sieves for improved screening of fine fractions Upper deck area 4800x1350 mm Lower deck area 4200x1350 mm Capacity up to 200 tons per hour with a fraction of 0-31-63 mm Maximum material inlet 100 mm Hydraulically opening grate on the hopper CAT 100 HP engine Weight 34 tons

Condition: excellent (used), functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 7,720 kg, number of seats: 1, mast type: mono, Year of construction: 2006, operating hours: 11,381 h, Equipment: additional headlights, hammer hydraulics, hydraulics, low noise, rubber tracks, Yanmar mini excavator with rubber tracks Good overall condition Lodpfszav Trsx Adpjhk Dozer blade Machine ready for work More information on the Almerisan website.

Condition: good (used), Year of construction: 2010, empty load weight: 750 kg, For sale: a well-maintained, fully functional aerial work platform. Working height: 6.5m Lodpfx Aozpfu Nsdpohk Floor height: 4.5m Trade-in and transport options available – please inquire. For more information, call or send a message.

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation Lsdpsztad Tjfx Adpehk – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z Lhodjy Na Hvepfx Adpjk – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: good (used), Year of construction: 2000, empty load weight: 5,400 kg, For sale Well-functioning aerial work platform Working height 12 m Nice compact machine Trade-in and transport negotiable For more information call or send a message Lodpfey Dpxksx Adpehk

Condition: used, Year of construction: 2008, empty load weight: 2,300 kg, fuel type: diesel, Used articulated boom lift for sale: Working height: 8,8 metres Weight:  2300kg Lifting capacity: 150 kg Dimensions: 4,08 x 1,65 x 1,96 metres Kubota 3 cylinder Ledpfx Adsyw Uczjpshk Diesel Price per unit: € 13.500,- ex. VAT 6 units in stock!!

Condition: used, Year of construction: 2016, operating hours: 43,000 h, functionality: fully functional, System consisting of: 1 welding robot Qirox QRC 350-E incl. V7 Adv. controller, programming handheld device with 15 m cable, 24 V buffer, 2 GB flash drive, external cooling unit. Software expansion: Ledpozmyfwofx Adpshk Gas nozzle sensor, arc seam tracking, point editor, transformation, parameter interlocking, multi-layer technique, Manax Offline laser ICSE LD Welding equipment: Qineo Puls 600 (600A) with Premium control module, wire feeder, burner hose package, welding torch MRW 510 evo, Duo drive CDD 2, torch test gauge individual as well as with CDD, mechanical cleaning with wire cutter, external cleaning, pressure booster, wire spool equipment. Elevated track 20 kN, travel path 10 m, 2 track supports. 2 L manipulators WPS-TS 7.5 kN, rotation radius 1100 mm, load capacity 750 kg. 2 adjustable counter bearings, travel distance 3 m, manual. Connection control, 2 start pre-selection, partition walls and 2 sliding gates incl. end switch protection. 1 filter unit Tecau 6000 m³ extraction capacity, 1 extraction hood 3x2.5 m with curtains, suction slit channel. Documentation, CE declaration. The system was dismantled in June, inspected before dismantling, and regularly maintained by Cloos.

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Heavies Belt / Lights Belt Volvo Diesel / Electric Generator Driven 19,000 kgs Very Nice Unit Fully Serviced & Ready To Go Straight To Work Lodpfx Asyyxx Ejdpjhk

Condition: ready for operation (used), functionality: fully functional, power: 24.4 kW (33.17 HP), gearing type: automatic, fuel type: diesel, color: original, empty load weight: 3,425 kg, chain condition: 60 %, Year of construction: 2012, operating hours: 5,946 h, Equipment: cabin, standard shovel, We are offering a Bobcat E35 tracked excavator for sale, available immediately. Registration number: 175/26 Technical specifications: Engine: Kubota 24.4 kW Operating hours: 5965 hours Year of manufacture: 2012 Weight: 3.424 t Equipment: Suspended driver's seat, mechanical clamp, crane hook, hydraulic connections on the boom, manual engine speed control, heater, cooling system, lighting, dozer blade Accessories: Lsdpfx Asy S S I Dodpohk 1 x ditching bucket (120 cm wide) 1 x digging bucket (30 cm wide, requires modification) Transport dimensions: Length: 4 m Width: 1.72 m Height: 2.4 m Loading and transport to the destination are possible upon agreement. The stated price is exclusive of VAT.

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT Lhodpfx Adjxya Hzopek MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, saw blade diameter: 350 mm, height adjustment type: mechanical, saw blade bore: 70 mm, spindle diameter: 48 mm, chain width: 300 mm, extraction nozzle diameter: 150 mm, working height: 110 mm, OGAM PO-280 Track Multirip Saw Specification: • Condition – used, after complete overhaul • Manufacturer – OGAM • Model – PO-280 • Track width: 300 mm Ledpfxsxtc Iuj Adpjhk • Max working height – 110 mm • Main motor power: 25 HP (~18 kW) • Maximum blade diameter: 350 mm • Spindle Ø48 mm, sleeves Ø70 mm • Track feed speed adjustment range: 5–40 m/min • Track in very good condition, no wear • Extraction nozzle Ø150 mm • Weight – approx. 2000 kg • Overall dimensions – 190 x 150 x 165 cm (W x L x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown represent the actual condition of the item for sale • Test running and inspection of the machine on site are possible.

Condition: new, functionality: fully functional, This listing is for informational purposes only and does not constitute a legally binding offer. Tracked Dumper with Front Loader – GP500 PRO DUMPER The GP500 PRO DUMPER is a compact and powerful tracked dumper wheelbarrow with a front loader, powered by a 5.5 HP petrol engine. With a payload capacity of 500 kg, this machine is ideally suited for demanding construction, electrical, plumbing, refurbishment work, and similar applications. It can operate safely on slopes of up to 20 degrees. The robust steel skip, with a volume of 0.196 m³, is hydraulically tipable and suitable for a variety of tasks. The GP500 PRO features an oil cooling system and a foldable operator platform. Manufactured under European technical supervision and based on a durable design, it is fit for use in a wide range of conditions. Comprehensive post-warranty service is also available. Ljdpfxoyk Sl So Adpjhk TECHNICAL DATA: Operating weight: 470 kg Payload: 500 kg Skip volume: 0.196 m³ Skip dimensions: 1060 × 645 × 480 mm Tipping: hydraulic Start system: electric Drive: hydraulic Maximum travel speed: 3 km/h WORKING RANGE AND DIMENSIONS: Maximum working height: 1310 mm Maximum pin height: 870 mm Maximum discharge height: 270 mm Load reach at maximum discharge height: 350 mm Wheelbase: 810 mm Ground clearance: 53 mm Bucket tipping angle: 55° Bucket width: 780 mm Overall length: 1620 mm Overall width: 850 mm Chassis width: 960 mm Overall height: 1320 mm Turning radius: 1195 mm ENGINE: Engine brand: Rato Maximum output: 4.1 kW / 5.5 HP Maximum speed: 3600 rpm Cooling: air-cooled Oil change volume: 0.5 litres Fuel type: petrol Additional information: Track size: 180 × 60 × 38 mm Fuel tank: 3 litres Hydraulic oil tank: 14 litres PRICE: €3,300 net €3,927 gross

Condition: used, Year of construction: 1977, operating hours: 3,753 h, 1977 | Hanomag D 400LC | Used Tracked Dozer | 3753 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 7500 or Make an Offer. Lsdpfjzf H Rqex Adpshk Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 33 inspection points 19 approved ✅ 12 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "29698 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.