Used Carriage for sale (2,037)

Condition: used, machine/vehicle number: 516221X00500, Year of construction: 2020, operating hours: 7,736 h, load capacity: 1,600 kg, lifting height: 5,000 mm, mast type: triplex, fork length: 1,200 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 5,000 mm Fork carriage adjuster: 300–860 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery idle voltage: 50.9 V Service valid until: 06/2027 UVV inspection valid until: 06/2027 Dimensions & Weight Dimensions (L x W x H): 3,300 x 1,150 x 2,150 mm Machine weight: 3,300 kg Operating hours: 7,736 h EQUIPMENT Semi-cabin Windshield wiper LED work light, front LED work light, rear Orange warning light Safety light, rear Comfort seat Previously a Still full-service unit Hydraulic functions: 3rd + 4th valve Side shifter All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Nodpfx Aijz Nwa Aj Ajlh Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 144

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, machine/vehicle number: 01620006501, turning length: 650 mm, turning diameter: 350 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,800 mm, total length: 4,500 mm, total width: 2,200 mm, overall weight: 3,000 kg, bar passage: 65 mm, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT 620, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, nominal power (apparent): 21 kVA, operating hours of spindle: 10,771 h, DMG NEF 400 CNC lathe - Swing diameter over bed: 385 mm - Max. swing diameter over carriage: 350 mm - Distance between centers: 805 mm - Z-axis travel of tailstock: 680 mm - Height of spindle flange from ground: 1000 - 1010 mm - Diameter of spindle flange: 170 H5 mm - Diameter of chuck: 200/250 mm - Diameter of spindle bore: 87 mm - Diameter of draw tube: 67.5 mm Nljdpfo Afun Iex Ai Ash - Diameter in the front bearing: 100 mm - Incl. C1 axis, speed: 200 rpm - Feed force in X/Z axis S1: 4.5 / 6.2 kN - Feed force X/Z axis S6: 6 / 8.5 kN - Ball screw X/Z axis: 32 x 10 mm - Diameter of tool holder: VDI 30 - Number of tools: 12 pieces, of which 6 are driven - Tool shank: 20 x 20 mm - Tailstock travel: 680 mm - Max. feed force: 680 daN - Morse taper: MK 4 The machine is equipped with a tailstock, a SAUTER turret, and a three-jaw chuck from the manufacturer SCHUNK, jaw width: 210 mm, with hydraulic clamping, including various VDI 30 tool holders, some driven and some standard, some fitted with lathe accessories, as well as a chip conveyor and documentation. FCA D-94227 Zwiesel - loaded onto a truck.

Condition: not inspected (used), Year of construction: 2015, functionality: unexamined, machine/vehicle number: 150436, turning length: 1,000 mm, total length: 3,200 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 3,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 828 D, PINACHO ST-225 Lathe Nodpfx Aj Afup Sei Aolh - Center height above bed: approx. 260 mm - Swing over bed: approx. 520 mm - Center height above carriage: 180 mm - Swing over carriage: approx. 360 mm The machine is equipped with a tailstock and an 8-position tool turret, tool holder: VDI 30, including a 3-jaw chuck, diameter: 200 mm FCA D-94227 Zwiesel - loaded onto a truck.

Condition: used, machine/vehicle number: H2X386V04722, Year of construction: 2019, operating hours: 25,272 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 6,075 mm Fork carriage adjustment range: 350–1,050 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex mast with full free lift Drive type: Electric Battery type: 5 PzS Battery year of manufacture: 2023 Battery voltage: 48 V Battery capacity: 625 Ah Rest voltage: 51.3 V Dimensions and weight Dimensions (L × W × H): 3,200 × 1,150 × 2,761 mm Own weight: 3,800 kg Operating hours: 25,272 h Service valid until: 07/2027 UVV (Occupational Safety) valid until: 07/2027 EQUIPMENT 3rd and 4th valve Formerly a Linde full-service machine Facelift model with tilt angle indicator Fork carriage with side shift Lateral fall-through protection, easily removable White, non-marking tires LED work light at the front LED work light at the rear Road traffic lighting with turn signals Safety light at the front Safety light at the rear Comfort seat with lumbar support Seat heating All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons with a large forklift on-site is possible. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 157 Nedpfxjz S Nq Se Ai Aelh

Condition: used, Tol measurements Sk40 0 weight max. . t range L-W-H 170x600x1000 mm 3 pieces The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Nljdpfxs Afp Ago Ai Ash Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Code: 0507 Brand: SCM MINIMAX - ITALY Model: CU 350 K - CE Standard Universal 5 works combined machine for joinery workshops, craftspeople, furniture makers, bespoke furnishings, doors, wooden joinery, DIY, panels and various applications – CE Standard Technical data: Base consisting of a single, fully welded steel monoblock Cast iron worktable Wide worktable surface area Three-phase motors V 380/50 Hp 3 each Surface planer: Working width 350 mm Total length of tables 1800 mm N° 3 blades Anodised aluminium guide adjustable from 90° to 45° Thickness planer: Table dimensions 600 x 350 mm Njdpo Afwxlsfx Ai Aslh Max/min working height 230/3 mm Max removal depth 5 mm Spindle moulder: Spindle length 136 mm Max rotational speed 8000 rpm Max tool diameter extending below the table 180 mm Circular saw: Carriage made of anodised extruded aluminium with a sliding system on steel guides Carriage stroke 1500 mm Max blade diameter 300 mm Blade tilting 90°–45° Cutting width at parallel guide 900 mm Squaring frame complete with guide, stops and a guide adjustable in both directions from 90° to 45° for angled cuts on panels Workpiece clamping presser N° 3 suction inlets diameter 120 mm Overall dimensions of assembled machine mm 2000 x 2400 x 1100 h Transport dimensions mm 2000 x 1400 x 1200 h Weight kg 600

Condition: excellent (used), CATALOGUE NUMBER 7998 Nlodpfezrw U Hex Ai Ajh Technical data: - Spindle diameter 30mm - Spindle working height 120mm - Interchangeable spindle - Spindle locking - Adjustable up/down - Original cast iron guide with full adjustment - Original cast iron carriage with material clamping device + square - 4 types of rotation speeds + right/left 3000, 4500, 6000, 9000 rpm - Table dimensions 1020x1000mm - Square on the table - With brake - Motor 5.5kW - Dust extraction nozzle diameter 100mm, 120mm - Dimensions (L/W/H) 2200x1320x1310mm - Weight 966kg Advantages: - Made in Poland - Side carriage - Square on the table and on the side carriage - Used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in exchange rates)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fork length: 1,000 mm, empty load weight: 3,589 kg, TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 3,805 mm Overall height: 2,460 mm Fork carriage: FEM 2A Fork length: 1,000 mm MACHINE DETAILS Mast: Standard (2W380) Drive type: Electric Nedpfxez Sbris Ai Aslh Dimensions & Weight Dimensions (L x W x H): 2,150 x 1,100 x 2,460 mm Total weight: 3,589 kg Battery voltage: 48 V Battery capacity: 690 Ah Battery year of manufacture: 2006 Charger: Three-phase, 48 V, 80 A (not tested) Front tires: Superelastic, 200/50-10 Rear tires: Superelastic, 18 × 7-8 Front tire condition: 70% Rear tire condition: 70% Operating hours: 145 h EQUIPMENT 3rd valve Impulse control Side shifter

Condition: used, Fork carriage with hydraulic side shift + long forks, suitable for STILL model EFG 3.0/6004 Technical data: Nljdsztvuzopfx Ai Aeh - Fork carriage width: 1,100 mm - Fork length: 1,900 mm - Fork cross-section: 100 x 45 mm

Condition: good (used), Technical specifications: * Over bed – 270 mm * Center height – 125 mm * Maximum distance between centers – 500 mm * Spindle bore – 28 mm * Collet type B32 * Longitudinal travel of the carriage – 440 mm * Cross travel – 130 mm * Travel of the small tool-holding carriage – 90 mm * Travel of the tailstock sleeve – 100 mm Njdpfx Aie Afu Ino Aslh Equipment: * 3-jaw chuck, 125 mm diameter * Multifix A turret * 3 Multifix A tool holders * Quick-change tool system * 1 steady rest * 1 rear carriage

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Njdpfjyn Ny Usx Ai Ajlh Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, TECHNICAL DETAILS General Information Type of machine: Electric forklift, 3-wheel Manufacturer: Linde Model: E 15 Z-02 Year of manufacture: 2006 Operating hours: 3,530 h Condition: ready for operation Own weight: 3,097 kg Lifting Performance Load capacity: 1,500 kg Lifting height: 3,750 mm Mast: Standard (2W375) Fork carriage: FEM 2A Fork length: 1,100 mm Drive and Battery Drive: Electric, 24 V Battery voltage: 24 V Battery capacity: 805 Ah Battery year of manufacture: 2022 Battery charger: single-phase, 24 V, 50 A, not tested Tires Nlsdjz Scr Dopfx Ai Ajh Front tire: Superelastic, black, 18 × 7–8 Rear tire: Superelastic, black, 15 × 4.5–8 Front tire condition: 60 % Rear tire condition: 0 % Dimensions Overall length: 1,850 mm Overall width: 1,050 mm Overall height: 2,300 mm Structural height: 2,300 mm Sales Information Minimum price: none Sale: guaranteed to the highest bidder EQUIPMENT Side shifter 3rd valve Work light, front Roof protection Windshield Impulse control

Operating hours: 1,323 h, condition: used, total length: 2,550 mm, total width: 1,850 mm, total height: 1,830 mm, Year of manufacture: 2006 Colour: Grey Empty weight: 4.000 kg Price: On request - Year: 2006 - CE marking present: Yes - Serial number: 3075777 Nlodpfx Aio Afuqve Aoh - Operating hours: 1323 - Drive system: CNC - Control system brand: Haas - Swing over bed [mm]: 584 - Carriage turning diameter [mm]: 241 - Distance between centres [mm]: 508 - Max. spindle speed [rpm]: 4000 - Options: Three-jaw chuck, C-axis, Live tools, Turret - └ Tool magazine [pcs.]: 10 - X-axis travel [mm]: 215 - Z-axis travel [mm]: 508 - Transport dimensions: 2550mm x 1850mm x 1830mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Njdpfx Aszg Drnsi Ajlh Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors.

Condition: repair required (used), PRIMULTINI 1400 headring and carriage Nlsdpfxjx Nf Skj Ai Aoh

Condition: used, Year of construction: 2011, functionality: fully functional, power: 56 kW (76.14 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total height: 1,800 mm, total length: 4,800 mm, total width: 2,150 mm, Equipment: documentation/manual, Artiglio carriage with a Artiglio headrig for sale. Carriage is equipped with 3 Independent knees, positioning done by servo motors. Program for cutting and manual dimension setup done through a touch display for ease of use. Nljdpfxsy Anp Es Ai Aeh Carriage forward and reverse movement controlled by pedals, carriage is driven by an on board hydro motor. Turning, clamping and manual knee positioning done with joysticks. Cables and hydraulic hoses are ran to carriage through a pantograph. Schematics and user manuals in digital and printed format. Carriage and headrig have been removed, cleaned and some restoration work done after removal. Condition wise everything is fully functional just visual wear. Currently packed, stored in a warehouse and ready for shipping. Carriage: Model - NIBBIO 1000 Length - 4.8 m Width - 2.15 m Height - 1.8 m Longitudinal speed - 0-130 m/min Maximum side opening - 1000 mm Upper jaw opening - 800 mm Distance between wheels - 1260 mm Tow rope type - S10AR Towing rope diameter - 14 mm Overall length of towing ropes - 41 m Central tank capacity. Hydraulics - 120 l Longitudinal drive - 20 HP ONBOARD HYDROSTATIC Year - 2011 Headrig: Model - ST/I 130 Main motor power - 56 Kw Total weight - 4750 kg Flywheel diameter - 1300 mm Year - 2011

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Note: Operator terminal and angle scale on the right side! Cutting length: 3200 mm Max. saw blade overhang: 100 mm Feed rate, continuously variable: 5-100 m/min; return speed: 130 m/min Saw carriage guided on round shafts Drive via gear and rack and pinion system Automatic cutting length detection via laser sensor on the saw carriage Quick-change system for main and scoring saw blade (ProLock) Cutting direction against the stop Motor: 13.5 kW, total connected load: 18 kW, rated current: 38 A Nsdpfx Aio Adv Rus Aslh Electronic cutting height adjustment (continuously variable) for the sawing unit Raising and lowering of the sawing unit by means of a positioning drive Dimensional measurement via non-contact magnetic measuring system Including nesting program Scoring saw adjustment, horizontal and axial, from the control panel via electric servo motors Scoring saw unit with pneumatic lowering, scoring saw motor 2.2 kW Manual pressure regulators for package clamps and pressure bar for sensitive materials Tilting table on the left: 2300 x 600 mm with air cushion Solid stop rail with 2000 mm 2 side tables, 2300 mm with air cushion Material pusher, cutting length 3200 mm Feed rate: 25 m/min; return speed: 80 m/min Rear support table with 9 double roller tracks Package clamps, 6 pieces, 2-finger design, opening height 80 mm 3 veneer stops for cutting panels with protruding veneers Device for automatic positioning of the trimming position by the material pusher Lateral pressing device for workpieces from 20 to 1200 mm Modular control system with 24" TFT flat screen PC with Windows 7 Pro operating system With thermal label printer Availability: approx. January 2027 Location: North Rhine-Westphalia

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Manufacturer: VDF Boehringer Type: V800 Nodpfx Ais Ad Hgte Aslh Year of manufacture: 1974 Machine type: Lead and draw spindle lathe WORKING AREA Turning length: approx. 1,200 mm Center height above bed: 430 mm Turning diameter above bed: 660 mm Center height above carriage: 260 mm Turning diameter above carriage: 520 mm SPINDLE Spindle speed: 7.1–1,400 min⁻¹ Spindle bore: approx. 140 mm MACHINE DETAILS Dimensions (L × W × H): 4,000 × 2,000 × 1,800 mm Weight: 5,000 kg EQUIPMENT Multifix tool holder 3-jaw chuck, diameter 600 mm

Year of construction: 2014, condition: refurbished (used), functionality: fully functional, UHM120_H_T TANDEM BAND SAW Nlodpfx Aju Rmqioi Aoh Diameter of Wheels Ø 1200 mm Width of Wheels 140 mm Max. Cutting Height 1090 mm Max. Cutting Width 620 mm Upper Wheel Tilting 2×0.37 kW Movement of the Tandem 0.75 kW Hydraulic Unit Motor 2.2 kW Main Motor 2×45 kW - 1450 rpm Weight without Motor ~9000 kg - Capability to saw two timbers in one pass by tandem lined two band saws - Timber thickness is adjusted by two axes control system on band saw and log carriage system UTA_Z4 HYDRAULIC LOG CARRIAGE Max opening of headblocks :1000 mm Max opening of hooks : 1070 mm Forwarding speed :160 m/min Speed of headblocks :320 mm/sec Hydraulic unit of forwarding :22 kW Headblocks : 4 pcs Width of rails : 1220 mm - Fixed fence-horizontol movable hooks. The distance between fence and hooks can be adjusted to desired position min: 35 mm- max: 145 m - Independent horizontal move hooks, log is able to be easily aligned according to to cut axis while clamped and is able to be adjusted to a fix distance of the hook and the fence -min:15mm - max:145mm - Two sets of joysticks with six buttons each to control head blocks, hooks and turning arms and 1 set of hydraulic pedal for carriage forward backward movement Conveyors 1. 14 mt longitudinal log conveyor 2. 6 mt Trasnversal Log Decking 3. 7 mt Longitudinal Timber Conveyor

Condition: good (used), functionality: fully functional, Year of construction: 1996, PVC PROFILE HAUL-OFF UNIT, CONTACT LENGTH 3000X280MM, EQUIPPED WITH 2 NEW AC MOTORS CONTROLLED BY AN INVERTER, AND PNEUMATIC UPPER BELT CLAMPING SYSTEM. Nedpszbq Utjfx Ai Aslh

Condition: ready for operation (used), Year of construction: 2000, empty load weight: 800 kg, For sale: battery-powered tracked undercarriage. The machine runs and steers. Nlodpfjz Iubysx Ai Aeh For more information, please call or send a message.

Condition: used, Year of construction: 1972, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Information Manufacturer: PBR Type: TM 450/2000 Machine Type: Precision draw and feed spindle lathe Machine Weight: approx. 7.9 t Working Area Turning diameter over bed: 980 mm Turning diameter over carriage: 600 mm Turning length: 2,200 mm Turning diameter in the pit: 1,200 mm Pit length: 450 mm Spindle Spindle bore: 150 mm Speed stages: 24 Speed range: 8–800 rpm Axes and Travels X-axis: 2,000 mm X²-axis: 350 mm Y-axis: 500 mm Feeds Feed stages: 108 Longitudinal feed: 0.032–15.2 mm/rev Cross feed: 0.016–7.6 mm/rev Thread Cutting Number of thread pitches: 398 Metric thread pitch: 0.5–224 mm Metric thread pitch: 0.25–112 mm Imperial thread pitch: 56–1/8 TPI Nodpfxe Aa Azls Ai Aelh Diametral Pitch: 112–1/4 D.P. Tailstock Arbor support: MK 6 Arbor travel: 380 mm Electrical Data Voltage: 380 V Frequency: 50 Hz Total power requirement: 25 hp Dimensions Footprint: approx. 4.4 × 1.8 × 1.7 m EQUIPMENT Original Forkardt 3-jaw chuck, 500 mm Hardened and ground bed guides Rapid traverse for longitudinal and cross feeds Spindle brake Original Sauter hydraulics with external oil supply Original Ideal tool holder Faceplate with 4 independent jaws Coolant system Magnetic clutch Automatic longitudinal stops Cross stop Thread dial Reducing sleeve 2 fixed centers Fixed steady rest Swiveling Staudacher spindle guard with safety switch 2 emergency stop buttons Main switch Chip collector Workpiece lighting Machine-mounted control cabinet

Condition: excellent (used), DEMAG / ABUS / STAHL / LIFTKET - travelling trolleys / push trolleys / running wheels / rollers - 24 pieces: 1. Demag Type: U/EU 22 DC - 2200 kg (2 pcs). 2. Stahl - 1000 kg. 3. Abus Type: EF14 - 1400 kg. 4. Liftket Type: HFW500 - 500 kg. 5. Trolley, 2 pcs. Nlodpfey D Tvyex Ai Ash 6. Trolley - 5000 kg. 7. Demag - 1350 kg. 8. Abus - 580 kg. 9. Demag Type: EU-RU 5 PK - 1100 kg. 10. Demag Type: EU/RU 22 DK - 2600 kg. 11. Trolley, 3 pcs - 1100 kg. 12. Hadef roller - 2000 kg. 13. Running wheels / rollers - 7 pcs.

Condition: used, Year of manufacture: 2017 Lifting capacity: 5.000 kg Please contact Gebrauchtgeräte Center for more information Nodpfx Aiezfmfze Aslh

Condition: used, Spindle with carriage of 150 cm and feed by 2 rollers Nsdpjz Ahc Aefx Ai Aelh Note: Saw not working, the support bed is missing (see photo)