Used Carriage for sale (2,032)

Condition: good (used), lifting height: 3,290 mm, fuel type: gas, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 2017 Year of construction: 2017 Empty weight: 3.790 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex Lhsdpjz I Afmsfx Akqjn = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Forklift weight class: 2000 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: good (used), operating hours: 3,640 h, lifting height: 3,290 mm, fuel type: gas, mast type: duplex, power: 38 kW (51.67 HP), fork length: 1,200 mm, Year of manufacture: 2006 Year of construction: 2006 Empty weight: 3.740 kg Lifting capacity: 3.740 kg Number of valves: 3 CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - 3rd valve = Remarks = = Additional options and accessories = Lodpfxjz I Ak As Akqshn - Pneumatic shaped solids = More information = Make of engine: Mazda Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, operating hours: 13,507 h, lifting height: 4,670 mm, fuel type: gas, mast type: duplex, power: 46 kW (62.54 HP), fork length: 1,200 mm, General information Year of manufacture: 2011 Year of construction: 2011 Weights Empty weight: 4.490 kg Functional Lifting capacity: 2.500 kg Maximum passing height: 303 cm Number of valves: 3 Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve Lhjdpfxoz I Atdo Akqon = Remarks = = Additional options and accessories = - 4th valve = More information = Make of engine: Mazda 4cil Number of valves: 3 EPA Marked: yes Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2017, operating hours: 9,000 h, Type of fuel: LPG Year of manufacture: 2017 Colour: Yellow Operating hours: 9.000 Empty weight: 4.170 kg Dimensions (LxBxH): 250 x 122 x 277 cm Lifting capacity: 2.500 kg Lift height: 433 cm Fork dimensions: 1.200 x 1.010 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: D875B04618R - Operating hours: 9000 - Lifting capacity: 2500kg - Lifting height: 4330mm - Overhead clearance: 2790mm - Free lift: 0mm Lhjdsztu I Tspfx Akqen - Fork length: 1200mm - Maximum fork width: 1010mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Work lights - Mast: Duplex - Drive: LPG - Motor brand: PSI - Transport dimensions: 2500mm x 1220mm x 2770mm (l x w x h) - Transport weight [kg]: 4170kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, lifting height: 2,760 mm, fuel type: diesel, General information Year of manufacture: 2024 Weights Empty weight: 3.500 kg Functional Lifting capacity: 200 kg Working height: 1.050 cm Dimensions of cargo space: 616 x 202 x 276 cm Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elévateur Model: Topy 10.2 Year of build: 2024 Condition: Used Data: Gear type: manuell Lodpfxswn Hr Ne Akqehn Max. working height: 10,50 m Max. platform height: 8,50 m Max. reach (200 kg): 4,80 m Total dimensions LxWxH: 6,16 x 2,02 x 2,76 m Platform dimensions (outside) LxWxH: 1,00 x 0,75 x 1,11 m Max. basket load: 200 kg Max. Number of people: 2 Swivel range of the upper carriage: 2x 200° Engine: Mercedes Benz Displacement: 1.950 cm³ Performance: 110 kw Colour: weiß Driving license class: B / 3 Own weight: 3.500 kg Special features: insulated work basket, socket in the basket, AdBlue.

Condition: used, operating hours: 6,983 h, lifting height: 4,950 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,200 mm, General information Year of manufacture: 2019 Year of construction: 2019 Weights Empty weight: 6.980 kg Functional Lifting capacity: 4.000 kg Maximum passing height: 322 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids - Roof window Lsdpfx Akez I A I Ieqehn = More information = Make of engine: kubota Number of valves: 3 Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: used, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Year of manufacture: 2006 Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm - Overhead clearance: 3040mm Lhodpfx Aezwc Tfskqon - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Half cabin, Work lights, Heating, Air tires - Mast: Duplex - Drive: Diesel - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, operating hours: 10,634 h, lifting height: 4,950 mm, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), fork length: 1,200 mm, General information Year of manufacture: 2019 Year of construction: 2019 Weights Empty weight: 6.980 kg Functional Lifting capacity: 4.000 kg Maximum passing height: 322 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = Ledpfez I A Nfsx Akqehn - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids - Roof window = More information = Make of engine: kubota Number of valves: 3 Fork carriage: Other Please contact Bas Sindorf , ) for more information

Condition: good (used), operating hours: 2,541 h, lifting height: 8,800 mm, fuel type: electric, mast type: triplex, battery manufacturer: Batterie Siems, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,200 mm, General information Year of manufacture: 2008 Year of construction: 2008 Weights Empty weight: 3.590 kg Battery Battery: 620 Ah, 48 V, Year of manufacture 2017, Brand of battery Batterie Siems Functional Lifting capacity: 1.700 kg Maximum passing height: 340 cm Number of valves: 3 Condition Technical condition: good Visual appearance: good Other information Mast type: triplex Lodpfez I Airsx Akqohn = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - 4th valve - Pneumatic shaped solids = More information = Number of valves: 3 Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, For sale is a used floor conveyor system from Louis Schierholz GmbH, taken from the oven areas of an industrial wheel painting line. The conveyor technology offered is for the transport of vehicle wheels or aluminum rims. The original design documents from Widmer+Ernst / VGT AG date back to 1998. This date refers to the design status; the actual year of construction of the conveyor system was 1999/2000. A precise model designation is not currently known. Information from the design documents: Ljdpo Aar Tdsfx Akqjhn - Conveyor speed: 1.6 m/min - Primer oven: 59 m conveyor length - Primer drying oven: 40 m conveyor length - Primer baking oven: 80 m conveyor length - Clear coat baking oven: 64 m conveyor length - Total length of originally documented oven conveyor sections: 243 m The 243 m is a design specification and not a guaranteed delivery quantity. It is not certain whether all rails and components of the original sections are still available. The actual quantity available and the definitive scope of delivery will be determined and agreed upon jointly during an inspection prior to purchase. The system is designed as a floor-mounted rail guidance system with straight and curved sections, as well as vertical workpiece carriers. The offer includes the rail system, the chain and the tool carriage, as well as the tool holder. Control and drive systems are not part of the offer. The exact scope of the available parts will be determined during the inspection prior to purchase. Location: 36381 Schlüchtern. Price upon request.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 2,661 h, load capacity: 4,000 kg, lifting height: 5,250 mm, fuel type: gas, mast type: triplex, construction height: 2,450 mm, drive type: Treibgas, Four-way reach truck Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Lhodpfxj Aat Euj Akqsn Fork carriage, side shifter, fork positioner, 3rd valve, 4th valve.

Condition: excellent (used), functionality: fully functional, CNC Heavy-Duty Lathe POREBA TPK-90N × 2000 mm – SIEMENS CNC We offer a heavy-duty CNC lathe POREBA TPK-90N with a turning length of 2000 mm, equipped with a SIEMENS CNC control. The chuck visible on the photos is not included in the quipment. The machine is designed for precise machining of large and heavy workpieces. Its robust construction and massive machine bed, characteristic of POREBA heavy-duty lathes, provide high rigidity during machining. Main technical specifications: Ljdpfxjz Atg To Akqshn Manufacturer: POREBA Model: TPK-90N CNC control: SIEMENS Turning length / distance between centers: 2000 mm Swing over bed: approx. 930 mm Swing over carriage: approx. 630 mm Swing in gap: approx. 1200 mm Spindle bore: approx. 95 mm Max. spindle speed: up to 800 rpm Main motor power: approx. 22 kW Tailstock taper: Morse 6 Main features: SIEMENS CNC control, heavy and highly rigid machine construction, large swing over bed of approx. 930 mm, 2000 mm turning length, suitable for machining large and heavy workpieces, proven design of POREBA heavy-duty industrial lathes. The machine is located in Bydgoszcz, Poland. Inspection and test run are possible by prior arrangement. METALEX – machine tools since 1979.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 132 h, load capacity: 18,000 kg, lifting height: 4,000 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 3,695 mm, power: 168 kW (228.42 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,140 kg, total length: 5,065 mm, drive type: Diesel, construction width: 2,540 mm, Diesel forklift Load center: 600 Fork width: 200 mm Fork thickness: 100 mm ISO class: Terminal West Mast type: Duplex Transmission: ZF 3WG171 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-to-own and financing options at favorable terms are always possible for us. We will also gladly purchase your used equipment, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this DCG180-6. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom modifications for forklifts from 8 tons upwards. We will also gladly display your vehicle for consignment sale. Lodpfx Aez Ewg Hskqohn Side shifter, fork positioner Fork carriage with central leveling; fork positioner opening range: 600 / 2355 mm Rear work light, front work light, heater, full cabin, air conditioning, full free lift, CE certificate, scale, Central lubrication system; 1 rear-view camera on the roof with monitor in the cabin, 1 camera in the mast in combination with the rear-view camera, tire pressure monitoring; engine heater 220 V; Grammer Actimo XL air-suspended driver's seat including seat heating, Forrex fire extinguishing system.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 14,768 h, load capacity: 6,000 kg, lifting height: 7,550 mm, free lift: 2,450 mm, fuel type: electric, mast type: triplex, construction height: 3,490 mm, fork carriage width: 1,520 mm, fork length: 1,600 mm, empty load weight: 13,174 kg, total length: 5,050 mm, drive type: Elektro, construction width: 2,400 mm, Electric Sideload Forklift Load Center: 800 mm Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tires Type: Pneumatic Front Tire Size: 355/65-15 Rear Tires Type: Pneumatic Rear Tire Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year: 2021 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing at attractive rates are always possible. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice about this EGX60/16/75TR. P.S.: Our in-house forklift master workshop specializes in repair, overhaul, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale at our premises. Fork Positioning System, 1x NIVO Fork; Fork carriage tilt; Fork positioner opening range: 465 / 1460 mm Heater, Full Cabin, Full Free Lift, Lsdpfxoz Ev U Aj Akqehn Platform height: 1050 mm

Condition: used, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Lodpfx Aewbdv Sokqehn By means of these cyclic loads and the accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the carriage All-round grids in the carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10 %, 50 Hz Nominal power: 30 kW Nominal current: 50 A Refrigerant: R-404a /R-23 Refrigeration unit: Water-cooled Weight: approx. 940 kg Year of manufacture: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Diskus Werke DSH 600/1000 Surface Grinding Machine This machine type is a machine with a motor-driven grinding spindle. The workpieces are clamped and ground using clamping devices adapted to the specific task. The devices are attached to the machine bed. The column carriage, on which the motor spindle is mounted, serves as a feed, dressing, and oscillating slide. Manufacturer: Diskus Type: DSH 600/1000 Lodpfjhtyudsx Akqshn Operating voltage: 380 V DC voltage: 24 V Control voltage: 220 V Rated power: 27 kW Rated current: 56 A Year of manufacture: 1964 Condition: used You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, machine/vehicle number: 14955, Year of construction: 2010, operating hours: 2,340 h, load capacity: 4,500 kg, lifting height: 5,500 mm, fuel type: diesel, construction height: 3,600 mm, battery voltage: 12 V, fork length: 1,350 mm, tire condition: 50 %, front tire type: cushion tires (black), front tire size: 200/50, rear tire type: cushion tires (black), rear tire size: 27x10-12, overall weight: 6,400 kg, empty load weight: 6,400 kg, total length: 2,500 mm, total width: 2,200 mm, Equipment: cabin, fork extension, lighting, sideshift, Combilift C4500 4-way forklift | Year of manufacture 2010 | Only 2,340 operating hours | Wide Traverse Carriage For sale is a well-maintained Combilift C4500 4-way forklift from 2010 with only 2,340 operating hours. The Combilift is ideally suited for the flexible transport and storage of long goods, wood, steel, profiles and other bulky materials. Thanks to the 4-way technology, the vehicle can travel both forwards/backwards and sideways, making it particularly suitable for use in narrow aisles. Technical data / Equipment: Manufacturer: Combilift Model: C4500 Vehicle type: 4-way forklift Year of manufacture: 2010 Operating hours: approx. 2,340 h Load capacity: 4,500 kg Special equipment: Wide Traverse Carriage, rear work lights, front work lights, roof protection, windshield, full cab, CE certificate, interior mirror Versatile for long goods and bulky loads Lhsdpfx Akezvcc Dsqsn The forklift is particularly distinguished by its low operating hours. The Wide Traverse Carriage expands the possibilities for handling different loads and dimensions. Inspection and test drive possible by appointment. Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2009, operating hours: 7,700 h, functionality: fully functional, mileage: 7,700 km, overall weight: 5,050 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 5,050 kg, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, adjustable chassis, all wheel drive, hydraulics, low noise, rubber tracks, MGC.pl – professional sales and service of VERMEER machines! We specialize in the sale and service of professional VERMEER horizontal directional drilling rigs. We provide expert technical advice, assistance in selecting the right equipment, and service support. We also offer other VERMEER drilling rig models. VERMEER NAVIGATOR D20x22 SERIES II – 2009 VERMEER NAVIGATOR D9X13 SERIES II - 2012 VERMEER D24x40A - 2003 We offer for sale a professional VERMEER D20x22 II NAVIGATOR horizontal directional drilling rig from 2009, manufactured in the United States. The machine comes from its first and only owner, who has used it continuously since it was new until the cessation of their business operations. We have a flushing system available for this DRILLING RIG, which is not included in the PRICE. Engine - Model: Kubota 3800 Turbo - Type: Turbocharged diesel engine Lsdpj Ad I Huefx Akqehn - Power: 62 kW / 83 hp, approximately 84 hp - Maximum idle speed: 2400 rpm - Engine oil capacity with filter: 8.5 l - Fuel tank: 95 l Drilling parameters - Maximum spindle torque: 2983 Nm - Maximum spindle rotation speed: 205 rpm - Thrust force: approximately 89 kN / 9.07 t - Pull force: approximately 89 kN / 9.07 t - Minimum bore diameter: 9 cm - Carriage travel speed – fast range: 41 m/min - Carriage travel speed – slow range: 27 m/min - Automatic rod feeder: yes Drill rods - Type: Vermeer Firestick® I - Single rod length: 3 m - Rod diameter: 52 mm - Single rod weight: 27 kg - Minimum bending radius: 31 m - Rod magazine capacity: 107 m total length Flushing and hydraulic system - Maximum flushing pump capacity: 95 l/min - Maximum flushing pressure: 52 bar - Hydraulic oil tank capacity: 87 l Dimensions, weight, and travel - Maximum length: 541 cm - Transport length: 508 cm - Width: 119 cm - Height: 193 cm - Catalog weight: 4808 kg - Maximum travel speed: approximately 4 km/h EQUIPMENT Hydraulic drilling system Track-type undercarriage Operator station with seat Drill rod magazine Hydraulic drilling mast Anchoring and stabilization system Control system for working functions Design adapted for professional trenchless operations APPLICATION The VERMEER D20x22 II drilling rig is used for: Construction of fiber optic and telecommunications networks Installation of water supply systems Construction of gas networks Laying of power cables Installation of pressure sewer systems Construction of culverts under roads and railway tracks Implementation of infrastructure projects using trenchless methods GREATEST ADVANTAGES OF THE OFFERED MACHINE 1 OWNER SINCE NEW – the machine remained in the hands of one company throughout its service life. SALE DUE TO CESSATION OF BUSINESS – the previous owner has ceased operating the business. INSPECTION REPORT: The machine has been tested for various functions and is fully operational. There are no leaks. The engine runs smoothly, both when warm and cold. The hydraulic system also has no significant play or leaks. The stated price is net and applies to export and for companies. A substantial discount is possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: excellent (used), CATALOGUE NUMBER: 6969 TECHNICAL DATA Circular saw: - max. saw blade diameter 300mm - spindle 30mm - max. cutting height 60mm - blade adjustable front/rear - motor 2.4kW Milling machine: Arbor: - spindle diameter 40mm - spindle working height 190mm - spindle locking - max. milling cutter diameter 360mm - motor 7.5kW - 2 types of rotation speeds - material clamping - side carriage adjustable up/down, front/rear - angle guide - retractable support from the table - manual carriage feed - dust extraction nozzle diameter 80mm, 160mm - dimensions L/W/H 1910x1960x1800mm, - weight 830kg Lhjdjzw Dgmopfx Akqen – Polish production – DTR documentation – upper control panel – used milling machine, very good condition Net price: 13900 PLN Net price: 3233 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (the price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Ledpfx Akezilz Nsqjhn Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: used, GRIGGIO UNICA 400 professional sliding table panel saw, manufactured in 2014. Heavy-duty industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, cabinet makers, and woodworking production facilities. Lhsdpfs Ad I T Ujx Akqsn The machine features a robust construction and a sliding carriage designed for accurate cutting and squaring of wooden panels, MDF, chipboard, plywood, and other compatible wood-based materials. Main Features and Technical Specifications Manufacturer: GRIGGIO Model: UNICA 400 Year of manufacture: 2014 Machine type: Professional sliding table panel saw Power supply: Three-phase, 400 V – 50 Hz Rated current: 15 A CE marked Tilting circular saw blade from 0° to 45° Electronic adjustments with digital displays Aluminium sliding carriage with crosscut fence Rip fence and adjustable positioning stops Workpiece clamping system and hold-down devices Overhead saw blade guard with dust extraction connection Front control panel with emergency stop button Scoring saw unit visible on the machine

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Lhjdpfx Akezn N Ikoqon

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Lhedpjz Ehvxsfx Akqjn

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Ledjvvi N Ijpfx Akqohn

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lhedpfx Ajvvkipskqsn