Used Carriage Belt for sale (11,096)

Condition: used, Year of construction: 2009, conveyor belt, belt conveyor, transport belt, belt conveyor Csdpfx Aqotrhm Ajvjhd -Manufacturer: Grenzebach, conveyor belt 2 levels type EZT with guide rollers -Speed: frequency controlled -Drive: 2x SEW Eurodrive -Conveyor belt length: 1400 mm -Belt spacing: 410 mm -Cross carriage: roller spacing 1000 mm -Number: 2x conveyor belt available -Price per piece -Dimensions: 1450/1550/H920 mm -Weight: 358 kg/pc.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, Cedszw Apgspfx Aqvehd 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, conveyor belt length: 4,450 mm, conveyor belt width: 600 mm, total length: 4,500 mm, total width: 800 mm, total height: 600 mm, overall weight: 550 kg, discharge height: 3,000 mm, power: 1.1 kW (1.50 HP), type of input current: three-phase, input frequency: 50 Hz, 371 conveyor belt 445x60cm paddle conveyor belt High performance paddle conveyor belt for sale in excellent condition length: 445cm speed: 18-21 meters/minute belt width: 60cm total width: 80cm belt paddle height 8 cm belt tray size: 52x29x8cm stainless steel cover Cjdpoygcupefx Aqvohd steel frame drive: geared motor 380/220v 50hz 1.1kw weight: ca 550kg

Condition: excellent (used), Year of construction: 1986, Langzauner LZG-K belt grinding machine Motor power 3 kW Table size 2500 x 800 mm Belt length 6800 mm Belt width 150 mm Belt speed 19 m/sec Column overhang 680 mm Column overhang height 280 mm Table height adjustment range 240 mm Footprint 3900 x 1400 mm Chsdpfx Aqs Ahy Auoved Weight 300 kg Year of manufacture 1986

Condition: excellent (used), Year of construction: 1983, Wide belt sanding machine Manufacturer: Bütfering Type: C55 2550 Year of manufacture: 1983 Belt speed continuously adjustable via a frequency converter Table: 2,550 x 950 mm Stroke: 400 mm Belt dimensions: 7,100 x 150 mm Sanding motor power: 4 kW Chsdpfxj Ahgxro Aqvod Fan motor power: 2.2 kW

Condition: excellent (used), Year of construction: 2010, I sell the set of 3pcs. Grecon Dimter belt conveyor suitable for Industry use, for example wooden industry, material manipulation etc. Total length 2,00m Csdpfst Rt I Hsx Aqvshd Band width 300mm Feeding with electric motor 0,37kW / 0,55HP Fully working. Available immediately.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide belt sanding machine, equipped for wet sanding, with 2 top-mounted sanding units and one brush unit (Scotch-Brite). The machine is used for surface finishing of metal parts with a width of up to 450 mm. The dust collection container with filter fabric is located at the bottom. Chjdpfxeyn E H Rs Aqvsd Technical drawings, operating manual, and the CE declaration are available. The machine will be delivered in good, partially refurbished condition. Further technical information can be found in the document.

Condition: used, Year of construction: 1998, machine/vehicle number: 111419, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 380 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,100 mm, grinding height: 580 mm, height adjustment type: electric, grinding belt speed: 150 mm/s, actuation type: electric, overall weight: 490 kg, Equipment: CE marking, documentation/manual, Samco belt grinding machine, type L/S 2500, Codpfxj Agbi Do Aqvshd Work table length 2500 mm, Work table width 1100 mm, Overall length 4040 mm, Overall width 2210 mm.

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Cjdpfx Ajz N Sfmeqvshd Production Germany Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Cjdpfx Aqj Aazaaevshd Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1977, Wide belt sander Bütfering see pictures Chjdpfx Aqsndcctjvjd Machine is immediately available Machine ran until a few days ago without problems in production but was very rarely used

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 60 mm, actuation type: electric, Industrial grinding machine / grinding and polishing machine for metal. Designed for general use in industry for machining and smoothing long components, metal parts, and welds. The machine is preserved in its original, green factory paint and is mounted on a sturdy base that facilitates stable operation in a workshop environment. Csdpfx Ae Ahplwsqvohd Due to its design and power, it is ideally suited for heavy-duty grinding operations. Manufacturer: Metabo Type: 77904 3 kW motor (three-phase)

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 20307, functionality: fully functional, power: 108 kW (146.84 HP), input voltage: 400 V, input current: 270 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,120 °C, inner dimension length: 3,000 mm, inner dimension width: 450 mm, inner dimension height: 200 mm, total length: 16,800 mm, total width: 1,726 mm, total height: 2,398 mm, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: documentation/manual, Conveyor belt tunnel furnace manufactured by Mahler. We used this furnace for the annealing of C-steel parts, utilizing 100% Exogas. The control system has already been upgraded, and all necessary maintenance and repair work has been carried out regularly. Inspection is possible by arrangement. Chsdpfx Ao Af Imajqved Disassembly and removal will be carried out by the buyer, in accordance with the applicable safety and environmental regulations.

Condition: excellent (used), Year of construction: 2018, Wide-belt sanding machine SCM DMC SYSTEM TM 1650 Year of manufacture: 2018 Csdpfx Aezx R Dnsqvohd Sanding width: 1,650 mm Workpiece thickness (min.): 3 mm Vertical clearance: 170 mm

Condition: used, functionality: fully functional, conveyor belt length: 6,500 mm, conveyor belt width: 1,190 mm, total length: 6,500 mm, total width: 1,950 mm, total height: 450 mm, Equipment: type plate available, Plastic modular belts/belt conveyors Condition: Used Year of manufacture: 2016/2017 Overall length: approx. 6500 mm Overall width incl. motor/feet: approx. 1950 mm Overall width without motor: approx. 1320 mm Chjdpfx Ae Ahkuroqvjd Conveyor width: approx. 1190 mm Conveyor height (height-adjustable): approx. 410 to 450 mm Material: Steel/Plastic Belt type: Plastic Color: Light gray/Dark gray Including SEW motor (0.75 KW) with Movimot (speed adjustable) Including feet (height-adjustable) Stock quantity: 3 units Price per unit Internal article number: 2026021103 The conveyor system was in operation until it was dismantled. Thanks to the excellent workmanship of the conveyor system, your material glides gently to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We will gladly create a customized offer for you or advise you on design or assembly issues. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in a wide range of industries, such as logistics, pharmaceuticals, crafts, or the electronics industry. Together, we will develop solutions to optimize your processes and material flow in a cost-effective and sustainable way. We can also offer you fully automatic sorting technology or complementary components such as picking shelves or containers. Features: Condition: fully functional, with signs of use Ideal for fast material transport Professionally disassembled and packaged Collection address: Industriestraße 5 (47918 Tönisvorst)

Condition: used, No. 10019 Various conveyor belts Used Consisting of 6 positions Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Chedewhp H Njpfx Aqved Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Year of construction: 1987, functionality: fully functional, Dear customers, we currently offer a very good, used vertical belt grinder for model and mold making, manufactured by F. Zimmermann. The technical details are as follows: Belt width: 250 mm Grinding height: 400 mm Belt length: 2,400 mm Belt speed: 18 m/s Work table: 750 x 350 mm Swivel range: 30/45° Power: 4.0 kW Speed: 1,400 rpm Dust extraction port diameter: 120 mm Dimensions: 990 x 850 x 1,740 mm Weight: 470 kg Equipment: - Foot-operated emergency stop - Machine light Cjdpoz S Eidjfx Aqvehd - Motorized table angle adjustment with digital display Price plus VAT, which will be shown separately on the invoice.

Condition: used, Year of construction: 2014, Sanding belt dimensions: 150 x 2000 mm Chsdpfx Aqo Ahp Hujvsd Contact wheel width/diameter: 200/200 mm Sanding belt speed: 14.5/29 m/s Drive motor: 380 V, 2.1/2.8 kW Space requirement: 1070 x 530 x 1130 mm Weight: 110 kg

Condition: used, Year of construction: 2023, Coalza Stainless Steel Modular Belt Elevators/Conveyors – Units Used Coalza stainless steel conveyor and elevator units, offered as shown in the pictures. Each unit is equipped with a white modular belt with cleats, an inclined conveying section, a geared motor drive, and transparent protective covers. These conveyors are designed for product transfer and elevation and can be integrated into a packaging or food-processing line. Coalza’s range includes modular belt elevators with profiled belts and horizontal loading and discharge ends, as well as L-type and straight elevating conveyor configurations. Depending on the configuration, the conveyor can be synchronized with a Coalza packaging machine using photocells. Coalza states that its conveyor belts are suitable for transporting food products. Csdpj Agq N Hefx Aqvehd Manufacturer: Coalza Stainless steel construction White modular belt with cleats Inclined elevator sections and horizontal conveying sections Geared motor drives Transparent protective covers Coalza conveyor, Coalza elevator conveyor, stainless steel conveyor, modular belt elevator, cleated belt conveyor, inclined conveyor, product elevator, food processing conveyor, food handling conveyor, packaging line conveyor, VFFS packaging line conveyor, product transfer conveyor, industrial belt conveyor, used Coalza conveyor.

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. Codpfx Ao Adfddjqvohd The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee!

Condition: used, functionality: fully functional, machine/vehicle number: M60L/9181, Offer Number: M60L/9181 Machinetype: conveying belt Info: Hinged conveyor belt Make: Type: Constr. year: Codpfxo Ah Ha Uo Aqvshd working range: 130 mm daylight: 190 mm setting plane: 155x45x125cm working hight: 1100 mm Location: In our warehouse

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 20478-98/A, conveyor belt length: 3,000 mm, conveyor belt width: 4,000 mm, total length: 3,100 mm, total width: 500 mm, overall weight: 100 kg, power: 0.18 kW (0.24 HP), motor manufacturer: Württ. Elektromotoren GmbH, New conveyor belt! Length: 300 cm Cedpfx Ao Afwlbjqvehd Width: 40 cm Height of cleats: 1 cm Height-adjustable conveyor belt

Condition: used, Year of construction: 2006, workpiece height (max.): 150 mm, workpiece width (max.): 1,300 mm, Available immediately: our wide-belt sanding machine, BÜTFERING Optimat STO213. It is currently in working order and can be viewed at our facility. It features 2 sanding belts. The available sanding width ranges from 1300 mm. Chedpfe Agrcyox Aqved

Condition: ready for operation (used), Tested and working well - inclined belt conveyor - hi grip belting - robust construction Chjdpfxozw Avte Aqvjd

Condition: excellent (used), CATALOGUE NUMBER 8128 Technical specifications: - Length of workpiece: 2600 mm - Width of workpiece: 800 mm - Main motor: 4 kW - Width of sanding belt: 170 mm - Fan - 2 speed settings + clockwise/counterclockwise rotation - Diameter of dust extraction port: 120 mm - Overall dimensions (L/W/H): 3650x1330x1500 mm - Weight: approximately 800 kg ADVANTAGES – Polish production – With fan – DTR documentation included – Unpainted – Used sander, very good condition Chode Aac Eqopfx Aqvod Net price: 6200 PLN Net price: 1442 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)