Used Carriage for sale (1,934)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Hedpovvkipsfx Ai Hjt

Condition: used, Altendorf F45 panel saw, Main motor: 5.5 kW, Hedpfezg Uw Isx Ai Hst Scoring saw motor: 0.75 kW, Carriage length: 300 cm, Tilt: 0-45 degrees, motor-driven adjustment, Blade height adjustment: motor-driven, Max. blade diameter: 350 mm, Cutting width on the right side: 1040 mm.

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Colour: Grey Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) Hedpfxoyuxm De Ai Hjt - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 09/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Available immediately at our yard in Kaufungen Hodpfx Aezpcx Eoi Het More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled working machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers - Roof and rear door, tall version - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable drum ELKA 600 with approx. 380 m of camera cable - Cable drum K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel jib with winch for lowering the camera/carriage - 1 carriage L 135 for main pipes DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional lighting, halogen, inclination measurement, and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,500.00 € * Down payment: 10% * Term: 60 * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to adjust it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each Hodpfx Aetpkv Aoi Hjt -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total

Condition: new, functionality: fully functional, Equipment: type plate available, Bosch Rexroth R Runner Block CS Guide Carriage R182153210 (Size 55) – NEW in original packaging Description: For sale: new Bosch Rexroth R Runner Block CS guide carriages (roller guide carriages made of carbon steel). These high-quality components come from a stock clearance and are in perfect condition. Technical data: • Manufacturer: Bosch Rexroth AG • Model number / Type: R182153210 (R Runner Block CS) • Series: R1821 (Narrow, normal, high R1821...2) • Size: 55 (Size 55) • Preload class: C3 (High preload) • Accuracy class: P (Precision accuracy level) • Seals: SS (Standard seal) • Material: Carbon steel • Condition: New • Date of manufacture (FD): 112 • Origin: Made in Germany (Schweinfurt) • Scope of delivery: 1 piece in original packaging including assembly instructions and accessories Special features & specifications: • High torque capacity and identical high load ratings in all four main load directions. • Maximum stiffness under load from all directions thanks to two additional fastening screw holes in the center of the roller guide carriage. • Corrosion-resistant coating (Resist CR, matte silver, hard chrome-plated) for maximum durability. • Universally combinable: All versions of the guide rails can be combined with all roller guide carriage variants of this series. Hsdpfxozkhvrs Ai Hot Pickup and shipping: Pickup in Graz or shipping is possible. If you are interested, please contact us.

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Hsdjvvi N Iopfx Ai Het

Condition: used, Year of construction: 2002, operating hours: 16,767 h, lifting height: 4,750 mm, fuel type: electric, mast type: triplex, battery manufacturer: R&W, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, Year of manufacture: 2002 Empty weight: 5.530 kg Lifting capacity: 3.000 kg Number of valves: 3 CE mark: yes General condition: average Technical condition: average Visual appearance: average Mast type: triplex Hsdpfxozv N Ako Ai Hjt = Additional options and accessories = - 3rd valve - Battery charger = Remarks = = Additional options and accessories = - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 Reconditioned: Yes Fork carriage: Sideshifter Please contact Bas Sindorf , ) for more information

Condition: used, Year of construction: 2006, operating hours: 11,070 h, lifting height: 4,450 mm, fuel type: diesel, mast type: duplex, fork length: 1,195 mm, fork width: 1,800 mm, total height: 3,040 mm, total length: 3,200 mm, total width: 2,000 mm, color: red, Empty weight: 7.000 kg Lifting capacity: 5.000 kg - Year: 2006 - Documentation available: Yes - CE marking present: Yes Hsdpfx Aezwc Tfsi Hjt - CE certificate present: No - Serial number: H2X394T01696 - Operating hours: 11070 - Lifting capacity: 5000kg - Lifting height: 4450mm - Overhead clearance: 3040mm - Fork length: 1195mm - Maximum fork width: 1800mm - Minimum fork width: 250mm - Number of wheels: 6 Wheels - Attachment: 3rd valve to fork carriage - Options: Joystick, Heating, Air tires, Half cabin, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: VW - Transport dimensions: 3200mm x 2000mm x 3040mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Fork carriage Hedpfxjw Erlcs Ai Hot ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Very good Description: ISO 3A (51 cm), capacity 5,000 kg, width 1,350 mm. To enlarge the width of the original fork carriage, can also be supplied to increase the lost load centre and as an adapter fork carriage between the forklift truck and other attachments. ID OS1670

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. Hsdpfxjzl A Ras Ai Hst The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg Hedpsv Hxubefx Ai Hjt

Condition: used, Year of construction: 2015, operating hours: 9,319 h, lifting height: 4,900 mm, fuel type: electric, mast type: triplex, battery manufacturer: Emrol, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,600 mm, Year of manufacture: 2015 Empty weight: 3.600 kg Lifting capacity: 2.000 kg Maximum passing height: 212 cm Number of valves: 3 General condition: average Technical condition: average Visual appearance: average Mast type: triplex = Additional options and accessories = - 3rd valve - Battery charger Hodezw Eiijpfx Ai Hst = Remarks = = Additional options and accessories = - 4th valve - Free lift - Pneumatic shaped solids - Roof window = More information = Number of valves: 3 EPA Marked: yes Fork carriage: Fork spreading Please contact Bas Sindorf , ) for more information

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516345H00091, Year of construction: 2017, operating hours: 7,098 h, load capacity: 2,500 kg, lifting height: 6,190 mm, free lift: 2,030 mm, fork length: 1,150 mm, empty load weight: 4,792 kg, TECHNICAL DETAILS Lifting height: 6,190 mm Free lift: 2,030 mm Clearance height: 2,775 mm Lifting capacity: 2,500 kg Fork length: 1,150 mm Minimum fork width: 240 mm Maximum fork width: 1,040 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery brand / battery type: STILL 80 V PzS 560 Battery year of manufacture: 2017 Battery voltage: 80 V Battery capacity: 560 Ah Battery tray length: 1,025 mm Battery tray width: 710 mm Battery tray height: 785 mm Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,290 x 2,770 mm Unladen weight: 4,792 kg Operating hours: 7,098 h EQUIPMENT Hodjzxcfwepfx Ai Hst Joystick Non-marking tires Work lights Partial cabin Documentation CE marking Additional hydraulics: 3rd and 4th valve for fork carriage

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Hsdpfsvmfawjx Ai Hjt Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: Hsdozw Dgmspfx Ai Het - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, Year of construction: 1999, Format: 340 mm Equipment: VIVA 340 No. 85, equipped with: 1 paper unwinder (1 m diameter) 1 rotary die-cutting unit with magnetic cylinder, 14 Zoll format length Hedpfozcp D Nex Ai Hst 6 letterpress units with integrated register carriage and magnetic cylinder (14 Zoll format length) 1 Grated exhaust system (600 mm diameter) 1 Winding system (700 mm diameter) 1 Longitudinal cutting/trimming unit 1 UV flexo coating unit with magnetic plate cylinder 7 I.S.T. UV dryers with CMK reflectors and provision for water cooling 1 Rotometrics Hydrajack pressure control system for the main die-cutting unit 1 BST ProMark video web inspection system (model Euroscope) 1 Preparations for COVID-19 treatment 1 Plate punching machine 1 Plate bending machine

Condition: repair required (used), PRIMULTINI 1400 headring and carriage Hjdpfxjx Nf Sks Ai Hot

Condition: used, Year of construction: 2008, operating hours: 7,890 h, Type of fuel: LPG Colour: Grey Empty weight: 3.560 kg Dimensions (LxBxH): 360 x 115 x 282 cm Lifting capacity: 2.500 kg Lift height: 450 cm Fork dimensions: 1.100 x 900 mm - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 10555 - Operating hours: 7890 - Lifting capacity: 2500kg - Lifting height: 4500mm - Overhead clearance: 2820mm Hodpfozrmf Ujx Ai Hst - Free lift: 0mm - Fork length: 1100mm - Maximum fork width: 900mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Half cabin, Work lights - Mast: Duplex - Drive: LPG - Transport dimensions: 3600mm x 1150mm x 2820mm (l x w x h) - Transport weight [kg]: 3560kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, functionality: fully functional, machine/vehicle number: A40200625, Year of construction: 2011, operating hours: 63,863 h, load capacity: 15,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 4,200 mm, power: 147 kW (199.86 HP), fork carriage width: 2,500 mm, empty load weight: 23,000 kg, drive type: Diesel, construction width: 2,500 mm, Heavy-duty forklift - Diesel Chassis number: A40200625 Load center: 1200 Mast type: Standard Transmission: ZF 3WG161 Hjdpouh Auijfx Ai Hot Technical condition: good Front tire type: Pneumatic Front tire size: 12.00-20 Front tire condition: 20 - 40% Rear tire type: Pneumatic Rear tire size: 12.00-20 Rear tire condition: 40 - 60% Description: sold without fork carriage and lifting cylinder Full cabin

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Hsdpfxezuwyzo Ai Hjt Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: excellent (used), GRACO CHECK-MATE L20C 5:1 Slide CM4B1H CHARACTERISTICS: - Brand: GRACO ; REF. CM4B1H - Putties, sealants, silicones, polyurethanes, etc. - General industry - This new product would have a price of 7.777,00 €. - Used, completely overhauled ✅ Hsdpfsqi Amusx Ai Hjt - Warranty 1 year ✅ - International shipping ✅ - VAT not included

Year of construction: 1994, condition: good (used), coil width: max. 2.000 mm Hedjd Ha Hcepfx Ai Hst coil weight: max. 30 t stroke: 1.000 mm

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Hsdpfxst Tqy Ej Ai Hot Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Condition: used, Year of construction: 1997, Type of fuel: Electric Colour: Grey Empty weight: 1.650 kg Dimensions (LxBxH): 190 x 115 x 200 cm Lifting capacity: 500 kg Lift height: 132 cm Clearance lift height: 132 cm Fork length: 1.000 mm - Year: 1997 - Documentation available: Yes - CE certificate present: No - Serial number: 90092 - Lifting capacity: 500kg - Lifting height: 1320mm - Overhead clearance: 1920mm - Free lift: 1320mm - Fork length: 1000mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage - Options: Free-lift - Mast: Mono - Drive: Electric - Battery information: - └ Brand/Type: R&W Hsdpfxozbqpds Ai Hjt - └ Battery year of construction: 2017 - └ Battery voltage: 24V - Transport dimensions: 1900mm x 1150mm x 2000mm (l x w x h) - Transport weight [kg]: 1650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent