Used Gbs for sale (461)

Year of construction: 2002, condition: excellent (used), Manufacturer: GBS Year of manufacture: 2002 Weight: 350 kg Fsdpfx Amemv Hz Ie Eepp Working length: 3300mm Pipe thickness: 12 and 15 mm 2 heads, force: 2t

Condition: used, GBS Prüfpuls rev3 Pulse generator for long-term insulation tests The Prüfpuls unit is designed for long-term insulation tests on test specimens with a capacity of up to 6 nF. Converter for high-voltage test transformer · Internal sine wave generator: 50-200 Hz. · Pulse width modulation 16-24 kHz of the sine wave via a full bridge. · Converter voltage adjustable from 0-600 V, Imax = 2.6 A, maximum power 1.3 kW · Pulse current limitation 110 A (shutdown threshold) Pulse transformer – drive · Drive via a full bridge · Full-bridge power supply adjustable from 0-1000 V, 1.3 A max. · Pulse current limitation 100 A (shutdown threshold). · Pulse width 20-120 μs, nominal 94 μs, adjustable · 2 selectable series inductances 150 μH, 300 μH, to adjust the pulse width or rise times to the load capacity and voltage. · Pulse repetition frequency 0.1 – 2.5 kHz, adjustable. · Polarity: Adjustable to positive, negative, or alternating, depending on the polarity of the sine wave signal. · Cosine-shaped pulse at the transformer output Pulse transformer cascade Fpodpfx Aou Egz Rsm Ejp · Output transformers in a 5-stage cascaded circuit. · Total turns ratio selectable as 1:7.7, 1:10, or 1:15 via taps. · Maximum output voltage 15 kV with possible load capacities of: * 6 nF with a pulse width of 73 μs at a repetition frequency of 2.5 kHz * 10 nF with a pulse width of 103 μs at a repetition frequency of 1.25 kHz · Voltage divider 1:1000 in parallel. · Overvoltage protection at approx. 20-23 kV by parallel spark gaps · Thermistor for over-temperature detection in the 1st transformer stage. · Earth-side current measurement socket 100 mV/A. Breakdown detection, testing · If the maximum bridge currents for the transformer drive or the maximum currents of the bridge power supplies are exceeded, the high voltage is switched off. · The device has a resettable operating hour counter to determine the test time. Manufacturer's price approx. €59,500 More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2023, functionality: fully functional, We are selling a bandsaw, Berg & Schmid GBS 242 DG HA-I, with a cutting speed of 25-90 m/min. The following equipment is included with the purchase: - Micro-spray system SET GBS 242, including spray nozzle, fluid reservoir, and 24V Plus mounting bracket. - Infeed roller conveyor, left side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. Fpsdpfxjz Dnq Hj Am Esp - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 45°, extending to the left (infeed). - Outfeed roller conveyor, right side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 60°, extending to the right (infeed). - LM 55 DH/manual digital length stop, measuring length 4000 mm, including connection to the saw.

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) Fjdpfjz Rtwaox Am Ejpp 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request - Pneumatic components: compressed air supply required - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: used, Year of construction: 2008, machine/vehicle number: .080356001, with miter cut, roller feed, and pneumatic clamping. Fpods Af Nk Nopfx Am Esp

Condition: used, Year of construction: 2025, cutting diameter 220 mm saw band length 2455 x 27 x 0,9 mm cutting width 230 mm cutting speed 35-74 m/min m/min total power requirement 1,2 kW weight of the machine ca. 250 t Fedpfsz N Hv Hox Am Eopp dimensions of the machine ca. 1,6 x 0,9 x 1,8 m The GBS 218 Eco AutoCut is a precision miter band saw designed for use in workshops and light industrial settings. It is ideally suited for cutting steel, stainless steel, and aluminum profiles, combining a powerful range of features with user-friendly operation. Thanks to the integrated AutoCut system, the machine offers three selectable operating modes: automatic saw frame lowering with adjustable feed rate, rapid approach to the workpiece, and manual operation with a braking cylinder function. This versatility makes it ideal for a wide variety of sawing requirements. Key features: - Miter cuts up to 60° to the left - Two-stage selectable cutting speed: 35 + 70 m/min - Vise with quick-clamping mechanism - Carbide saw blade guides - Automatic electric coolant system - Optional: Minimal quantity lubrication for improved cooling and lubrication

Condition: good (used), Year of construction: 2016, machine/vehicle number: 163231001, Technical data: - Saw blade dimensions: 3375 x 27 x 1.1 mm Fpodpjz I Rkdefx Am Esp - Cutting speed, continuously adjustable: 18 - 100 m/min - Hydraulic cutting pressure control - Hydraulic lifting and lowering of the saw frame - Machine table can be swiveled to the left and right for miter cuts - Cutting range - at 90°: round 255 mm - square: 240 mm - flat: 300 x 180 mm - at 45°: round 210 mm - flat: 200 x 160 mm - at 60°: left, round 135 mm - Max. opening width of the vise: 310 mm - Drive: 400 V / 2.2 kW - Space requirement: approx. W 2000 x H 1500 x D 2100 mm - Weight: approx. 990 kg - Includes: - Infeed roller conveyor: 5000 mm - Outfeed roller conveyor with measuring stop: 5000 mm

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) Fpjdpfx Amoxmfc Ue Eep - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: used, Year of construction: 2003, Semi-automatic metal band saw with hydraulic lowering of the saw frame, AutoCut function, and swiveling saw frame for miter cuts. Manufacturer: Berg & Schmid Fpsdpfs Aibkijx Am Ejp Model: GBS 220 Basic AutoCut Machine type: Metal band saw / Miter band saw Year of manufacture: 2003 Saw band speed: 30 / 60 m/min Operating mode: AutoCut Miter setting: Swiveling saw frame Material clamping: Vise Coolant system: Present Operating voltage: 400 V Phases: 3 Frequency: 50 Hz

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7312 - 3089 - FA, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 1,200 mm, TECHNICAL DETAILS Measuring range: 1,200 mm Standard: ISO 10360-2 MPEp: 8 µm MPEE: 5 + L/40 µm Travel range X-axis: 1,200 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 1,200 mm Measuring range X-axis: 1,200 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 1,200 mm MACHINE DETAILS Input voltage: 220 V Type of current: Alternating current (AC) Arm weight: 10.2 kg Total weight incl. transport box: approx. 20 kg Transport box length: 850 mm Transport box width: 550 mm Transport box height: 350 mm Last calibration: 01/11/2022 Notebook Model: HP ZBook Workstation Processor: Intel Core i7 RAM: 16 GB Graphics card: NVIDIA Hard drive: SSD Fsds Afhr Tspfx Am Ejpp EQUIPMENT PolyWorks Metrology Suite 2025 IR10.2 PolyWorks Inspector Probing Transferable USB dongle license Absolute encoder technology Integrated digital camera Integrated work light Haptic feedback Ergonomic handle Zero-G balancing weight Mounting plate TESA TKJ Probe with 3 mm ruby ball Probe with 6 mm ruby ball Probe with 15 mm steel ball Certified test bar for 1,200 mm measuring range Test bar length: 305 mm Calibration sphere Magnetic anchor Original transport case Dust cover B89 certificate Factory calibration documents Calibration certificate Testing documents

Condition: like new (used), Year of construction: 2023, operating hours: 2,889 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, overall weight: 3,600 kg, HAAS VF-2 – CNC Vertical Machining Center, Year of Manufacture 2023 Well-maintained 3-axis CNC machining center from a lease return, with only approximately 539 spindle hours. The machine is in near-new condition and is available immediately. Technical Data: - Control: HAAS Next Generation Control - Travels X/Y/Z: 762 / 406 / 508 mm - Table size: 914 × 356 mm - Spindle speed: 8,100 rpm - Spindle power: 22.4 kW - Spindle drive: Inline direct drive - Tool holder: 40 taper - Automatic tool changer - Program memory: 1 GB - Coolant tank: 208 liters - Coolant pump: 0.75 kW - Power connection: 380–480 V - Spindle hours: approx. 539 h - Cycle time: approx. 624 h Special equipment: - Spiral chip conveyor - Preparation for through-spindle coolant (TSC Ready) - Mobile hand-held device RJH-XL with touchscreen Fpedpj Ah Sptjfx Am Esp - Manual spindle orientation Location: Baden-Württemberg, Germany Availability: Immediate

Condition: excellent (used), Year of construction: 2020, operating hours: 6,403 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 35 kVA, controller model: Haas NGC-Steuerung, total height: 3,300 mm, total length: 7,400 mm, total width: 2,600 mm, table load: 1,814 kg, overall weight: 13,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 51, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, HAAS VF-10/40 – CNC Vertical Machining Center – Year of Manufacture 2020 High-performance CNC vertical machining center with a large work area, a 15,000 RPM high-speed spindle, and a side-mounted tool changer with 50+1 magazine positions. The machine features a modern HAAS NGC control system with numerous activated functions, including high-speed machining, macro programming, rigid tapping, and rotation/scaling. Technical Data: Fsdps Ahyvyofx Am Eepp • Manufacturer: HAAS • Model: VF-10/40 • Year of Manufacture: 2020 • Control System: HAAS NGC (Next Generation Control) • X-axis Travel: 3,048 mm • Y-axis Travel: 813 mm • Z-axis Travel: 762 mm • Table Size: 3,048 × 711 mm • Maximum Table Load: 1,814 kg • T-slots: 5 × 16 mm • Spindle Speed: 15,000 RPM • Spindle Power: 22.4 kW • Tool Holder: BT40 • Tool Magazine: 50+1 positions • Tool Changer: Side-mounted tool changer • Coolant Tank: 360 liters • Through-spindle coolant (TSC): Activated via control system • Power Supply: 400 V / 50 Hz / 3 phases • Machine Weight: approx. 13,654 kg • Shipping Dimensions (L × W × H): approx. 7,320 × 2,600 × 3,380 mm Control System and Equipment: • HAAS CNC control system with widescreen monitor • High-speed machining • Macro programming • VPS – Visual Programming System • Rotation and scaling • Rigid tapping • M19 spindle orientation • Fourth axis activated via control system • Coolant supply through the spindle activated via control system • Extended program memory: 1 GB • Correction tables • Media display Operating Hours (as of October 30, 2026): • Power-on hours: 15,717 h • Cycle start hours: 6,403 h • Feed hours: 3,735 h • Tool changes: 127,433 • Spindle hours: Not listed separately Technical specifications based on available information and control system photos. Model designation and individual equipment features subject to confirmation. Errors, changes, and prior sale are subject to change.

Year of construction: 2021, condition: used, Heat exchanger Fodsy Nl R Topfx Am Eopp Technotrans GBS 400H-X-24 Year: 2021

Condition: like new (used), Year of construction: 2022, operating hours: 761 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 250 mm, controller manufacturer: Makino Professional 6, controller model: FANUC FS31i-B, spindle speed (max.): 30,000 rpm, operating hours of spindle: 761 h, spindle nose: HSK-E50, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, MAKINO D200Z Makino Professional 6 (FANUC FS31i-B) Professional 6 Version X-axis 350 mm Y-axis 300 mm Z-axis 250 mm B-axis (swivel range) 180° (0° – 180°) C-axis (rotation angle) 360° continuous Distance table surface – spindle center 160 – 410 mm Table Max. load capacity 75 kg Max. workpiece size (Ø × H) 300 mm × 210 mm (with restrictions) Chuck EROWA Speed range 100 – 30,000 min⁻¹ Drive power (25 % ED / continuous) 15 kW / 11 kW Torque (25 % ED / continuous) 23.8 Nm / 21 Nm Interface HSK-E50 Positioning accuracy X/Y/Z (with linear scales) ± 0.0015 mm Repeatability X/Y/Z ± 0.0010 mm Positioning accuracy B/C-axis ± 2.0 s Repeatability B-axis / C-axis ± 2.0 s / ± 1.0 s Tolerances measured at the manufacturer’s plant with appropriate foundation and daily temperature fluctuations of max. ± 1 °C. Capacity 20 tools Max. tool weight 3 kg Max. tool dimensions Ø 50 mm (without restrictions) / Ø 80 mm (with restrictions) Max. tool length 200 mm Interface HSK-E50 Connected load 40 kVA Compressed air Fpedpe Ah D Twofx Am Esp 5 – 8 bar, max. 500 l/min 2,300 × 1,868 × 3,030 mm 4,600 kg Spindle with 30,000 rpm, HSK-E50 interface Rigid tapping Table with EROWA / System 3R chuck (DD motor), high-precision bearings Linear scales (X, Y, Z) Tool changer with 20 pockets (ATC 20), HSK interface Collision Safeguard (CSG) Robot door, loader interface (A-type) Chip conveyor with drum filter and downstream cyclone filter Flushing channel, air blower, coolant nozzles at spindle nose Fully enclosed work area, safety-guarded operator door Portable hand pendant Super GI.5 control, High-speed smooth TCP, GI-Smoothing Tool center point control (G43.4, G43.5) for simultaneous 5-axis machining 3-dimensional cutter compensation, tilted working plane Dynamic fixture compensation for rotary table, VP control Adaptive control (AC Control), energy saving function 2 GB part program memory, Data Center 1 GB, 1,000 programs Tool compensation memory: 400 offsets, type C 54 workpiece coordinate systems (6 + 48) User macro programming with 1,100 variables MRDF sensor (Machine Relocation Detection Function) EROWA Power Chuck Loader interface (A-type) instead of (L-type) Coolant temperature control unit (constant coolant temperature, with heating) Workpiece wash gun (operator side) Coolant shower Connection for oil mist extraction (Ø 125 mm) Air dryer Tool length measurement by BLUM laser, incl. tool breakage detection 3-coordinate touch probe Blum TC62 (measuring uncertainty approx. 0.005 mm, radio transmission, 14 automatic measuring cycles, incl. gauge block for C-axis pivot point) i-Set-up (additional operator panel for easy workpiece alignment) MML interface (fast Ethernet card) Network integration Remote diagnostics setup (VNC/EDM viewer, installation and training) OPC UA interface for Professional 6 (35 readable tags) Tool retract and re-approach function 3D model of the working area

Condition: excellent (used), Year of construction: 2002, Cutting capacity: approximately 230 mm (round), 230 mm (square), 280 x 150 mm (flat material) Cutting speed: 15 – 110 m/min Miter cuts to the left: 45°/60° Automatic workpiece feed Hydraulic lowering Micro-spray system Coolant system Fjdpjz Dk Rcjfx Am Ejpp Workpiece clamping device Roller conveyor

Year of construction: 2010, condition: excellent (used), functionality: fully functional, machine/vehicle number: 101210/001, For sale is a VISCOM Inline-AOI S3088-III, manufactured in May 2011, serial number 101210. The system is no longer in its original technical condition from 2011. At the end of 2022, it underwent a comprehensive modernization and maintenance by a VISCOM service technician. Approximately €29,000 was invested in the modernization, including hardware, software, and service. Condition: Used, functional. Technical specifications: - Manufacturer: VISCOM AG - Model: S3088-III - Year of manufacture: 05/2011 - Serial number: 101210 - VISCOM upgrade to VEG 101 - VISCOM conversion kit RK.C.0119 - Software: vVision - System is recognized as S3088 Flex on the software side - 8M-CBW4 (4SR) Combi camera module, White Left - 4 orthogonal cameras + 4 cameras for oblique view - VISCOM Type 126.209.B.47e - vVerify - VISCOM 2D libraries - ePM interface, dongle-based, for test program creation based on Gerber data and component/part data - Import of pad geometries for post-reflow test program creation - Multilingual user interface, including German, English, French, Italian, Spanish, Portuguese, Czech, Polish, Hungarian, Romanian, Russian, Swedish, and Chinese New system computer: As part of the modernization, a new system computer was installed: Intel Core i7-11700K 32 GB RAM Windows 10 Enterprise Additionally, a new 24" touchscreen monitor from Fujitsu was installed. The following work was carried out, among other things: - VEG-101 upgrade - Installation of the new system computer - Data transfer from the previous to the new system computer - Switch to vVision - M3 annual maintenance - Cleaning of the sensors - General cleaning of the system The work performed is documented in the available VISCOM service reports and invoices. The scope of supply includes, among other things: - VISCOM calibration case - Calibration plates - UPS system - UPS equipped with a new RBC123 battery in August 2026 - Operating manual - Transportation manual - VISCOM service reports - Invoices for the work performed - VISCOM training materials - vVision user training materials Special feature of the machine This system is not simply an older S3088-III in its original condition. The machine has undergone extensive technical modernization and has been equipped with a new system computer, a more up-to-date VISCOM operating environment vVision, and the VEG-101 platform. The investment of approximately €29,000 in modernization, hardware, software, and VISCOM service is accordingly documented. Fjdpfx Ajzuw R Hem Ejpp The system is particularly suitable for companies that are looking for a VISCOM inline-AOI with extensive features and completed modernization and prefer a used system over a new machine.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,668 h, travel distance X-axis: 1,270 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 711 mm, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC-1250SS was manufactured in 2022. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 762 mm, and Z-axis travel of 711 mm. The machine is equipped with a high-speed spindle capable of 15,000 RPM and includes a 30+1 side-mount tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS UMC-1250SS universal machining centre we have for sale. Contact us for further details. • Spindle nose to table: 102–813 mm • Spindle cooling: Included • Control and standard features (Haas CNC) Fpodpfxj Aifu Tj Am Ejp • 1 GB program memory • Dynamic Work Offsets (DWO) & Tool Center Point Control (TCPC) • Ethernet interface; HaasDrop • High-Speed Machining • Large color touchscreen • Remote Jog Handle with touchscreen (RJH-Touch) • Wireless Intuitive Probing System (WIPS) • Variable flow coolant; Coolant tank cover • Chip auger • Safe Run Mode • Early Power Failure Detection Module • HaasConnect remote monitoring • Second Home Position • M130 media display • Synchronized tapping • Standard 1-year warranty • Installed machine options (integrated) • 15,000 rpm inline spindle (15K-40T-IN) • 30+1 side-mount tool changer (SMTC-30-40T-HS) • Through-spindle coolant, 69 bar (TSC1K) • Through-tool air blast (TAB) • 8 additional M-functions (8M) Additional equipment • Chip conveyor with filtration system (CDF CONVEYOR) • External coolant filtration (ACF) • 360-liter coolant tank (GAL95) • Oil skimmer for coolant tank (OIL SKIMMER) • Chip strainer (CHIP STRAINER) • Air supply preparation for pneumatic vise (AIR VISE READY) • Machine anchoring kit (ANCHORING KIT) Technical Specification Taper Size ISO 40

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, Creaform Handyscan 700 Fpodpfxj Aib Uaj Am Eop The device was purchased in 2019, original price: EUR 39,000. It was used for a total of approximately 2 hours. Includes laptop with Intel i7 processor, 64 GB RAM, 1 TB storage, and Nvidia Quadro P1000 graphics card. VAT included. Invoice will be provided. Creaform Handyscan 700 - Accuracy: up to 0.03 mm - Resolution: 0.05 mm - 480,000 measurements/second - 7 laser crosses - Weight: 850 g - Software: VXelements for surface reconstruction

Condition: used, Year of construction: 2010, Working range X = 4,600 mm Y = 1,535 mm Z = 275 mm Designed for heavy-duty applications, making it ideal for machining large solid wood components and structural timber. The 5-axis controlled machining head enables the production of complex three-dimensional workpieces. • Central lubrication system • Desktop PC o Intel Celeron D CPU 2.66 GHz or higher o 512 MB RAM o 40 GB hard drive o 15" LCD monitor o Keyboard o Mouse o CD-ROM drive o Parallel port o RS-232 serial port o USB port o Ethernet card for connection to the office network • Remote service o Direct modem access for remote diagnostics and service • Electrical control cabinet • Air conditioning for the electrical cabinet • Safety system o Two pressure-sensitive safety mats on the front side of the machine with integrated control unit, ensuring safe alternating operation. • Signal lights for alternating (pendulum) machine operation • Job recovery function o Allows machining to resume after an emergency stop. • CE safety protection systems Worktable and accessories • Multizone table for 10 beams and 40 vacuum pods o Allows multiple workpieces to be loaded simultaneously, reducing tool changes and increasing productivity. o Vacuum clamping system o Pneumatic clamping system • 10 ATS beams, each equipped with 4 vacuum pods, L = 1,525 mm • EPS electronically positioned table for 10 beams • Rear stop row for 10 beams with 115 mm travel • Additional stop row at 375 mm with 140 mm travel • Additional stop row at 770 mm with 140 mm travel • Front stop row at 1,175 mm with 140 mm travel • 4 side stops with 140 mm travel (2 left + 2 right) complete with mounting hardware • 2 additional side stops with 140 mm travel (1 left + 1 right) complete with mounting hardware • Position sensors for all stops • 4 lifting devices for easier loading and unloading of workpieces for H = 74 mm modules • Vacuum unit 132 × 146 × H74 mm • Vacuum unit 132 × 75 × H74 mm • Vacuum unit 132 × 54 × H74 mm • UNICLAMP workpiece clamping system Fpsdjzlz Svspfx Am Eop • Window manufacturing kit H = 74 mm, 40–98 mm • 6 UNICLAMP double-acting quick-connect clamps • 2 UNICLAMP modules for short workpieces • Chip and waste conveyor • Vacuum generator for 250 m³/h vacuum pump o 250 m³/h vacuum pump • Spindle and machining equipment • Motor power: o 12 kW at 12,000 rpm (S1 duty) o 15 kW at 12,000 rpm (S6 duty) • Maximum spindle speed: 22,000 rpm • Tool interface: HSK F63 • C-axis: continuous 360° • B-axis: ±100° • Coolant unit with 1,600 W cooling capacity • 15-position tool magazine for the 5-axis head • Additional Z carriage for rear units • 8.6 kW PEAK POWER electrospindle with HSK F63 interface and air cooling, specially designed for applications requiring high torque at low spindle speeds • Gear-driven C-axis rotating unit (360°) • BH9 drilling unit o 9 independently controlled drill spindles o Includes: o 5 vertical drills with 32 mm spacing o 2 independent dual-output horizontal drills o Separate 3 kW drive motor • 22-position tool magazine with 180 mm centre distance • Automatic lubrication system Two Leitz tool sets are available for EUR 18,100 + VAT: • LEITZ IV 68 tool set • LEITZ IV 90 tool set This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Fjdpfx Amezrgw Rs Eepp Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Individual components can also be sold separately after consultation. Recommended prices for individual sale: No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm Fpedpfx Aozdb H Sjm Eop -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2011, We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. Fsdpfx Ajzv S Dwem Eepp We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: new, Year of construction: 2024, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID GBS 218 Eco AutoCut double mitre bandsaw Speed: 25-80 m/min Fpjdpfxot I R Eds Am Eep - Mitre left 60° - For cutting steel, stainless steel and aluminum profiles - Quick-clamping vice with quick-clamping device a. - Built-in blade tension control b. - Saw blade guide made of carbide c. - Electric automatic cooling system - Machine base (supplied disassembled) The AutoCut system consists of: - Hydraulic cylinder, feed control, spring assembly, limit switch and enables three work sequences: 1. automatic lowering of the saw frame via hydraulic cylinder with infinitely adjustable feed control valve and limit switch at the end of the cut 2. high-speed lowering of the saw frame from the rest position up to the workpiece, then switching to normal saw feed 3. manual operation - hydraulic cylinder works as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Further accessories such as saw bands, roller conveyors, measuring stops, minimum quantity lubrication etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm Fodpfjzt Twyex Am Ejpp without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, For sale is a refurbished Gillardon pillar drill press. The machine has been completely disassembled and refurbished (including a new spindle bearing). Gillardon GB 40 VE Year of manufacture 2003 Electromagnetic feed 0.1/0.16/0.25 on the joystick at the touch of a button Fpjdpo Ah Dztjfx Am Eop Infinitely variable speeds 2-speed motor Work light Emergency stop button 200mm spindle stroke 350mm throat Table size 630x535mm Clamping surface 400x500mm MT 4 chuck Keyless chuck 3-16mm Total height 2060mm Weight 500 kg Pickup and inspection in 89558 Böhmenkirch possible by arrangement. Shipping for an additional charge. Forklift available for loading.