Used Gbs for sale (275)

Condition: used, mileage: 198,027 km, power: 412 kW (560.16 HP), first registration: 02/2015, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,300 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,100 mm, total width: 2,500 mm, total height: 3,950 mm, Year of construction: 2015, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, retarder, seat heater, traction control, = Additional Options and Equipment = - Adaptive cruise control - Remote central locking - Heating - Air suspension - Engine brake - Radio - Disc brakes - Sun visor - Lane departure warning system - Auxiliary heating = Remarks = MAN TGX 33.560 6x4 GCW: 65,000 kg Intarder PTO 24V NATO socket = Further Information = Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steering; Left tire tread: 50%; Right tire tread: 50%; Suspension: leaf suspension Rear axle: Tire size: 315/80R22.5; Twin tires; Left inner tread: 70%; Left outer tread: 70%; Right inner tread: 70%; Right outer tread: 70%; Suspension: air suspension Front axle 2: Tire size: 315/80R22.5; Twin tires; Left inner tread: 60%; Left outer tread: 60%; Right inner tread: 60%; Right outer tread: 60%; Suspension: air suspension Number of cylinders: 6 Dedjyvqihspfx Al Uekn Unladen weight: 9,892 kg Payload: 23,108 kg Gross vehicle weight (GVW): 33,000 kg Type number: TGX 33.560 6x4 / INTARDER / PTO = Company Information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We also speak Russian. We strive to provide correct information; however, no rights can be derived from the details provided.

Condition: used, 14 m³ Internal dimensions: 520 x 240 x 105 Hydro board. Hydraulic top hatch Rear doors. = Further Information = Type number: 14 m³ CONTAINER / HYDRAULIC BO Dsdpfxjx Thvge Al Ujkn = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Russian spoken. We make every effort to provide accurate information, but no rights can be derived from the published texts.

Condition: used, axle configuration: 3 axles, first registration: 06/1992, suspension: air, tire size: 425/65R22.5, color: white, Year of construction: 1992, WELGRO 90 WSL 43-32 53.9 m³ 9 Compartments 2x Steering axles Silo tank trailer Dkodpfx Aeylwfyel Ujn = Further Information = Axle Configuration Tire size: 425/65R22.5 Brakes: Drum brakes Suspension: Air suspension Front axle: Tire tread left: 50%; Tire tread right: 50% Center axle: Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle: Steered; Tire tread left: 50%; Tire tread right: 50% Weights Unladen weight: 10,630 kg Payload: 28,370 kg Gross vehicle weight: 39,000 kg Identification Type number: 90 WSL 43-32 / BULK 9 COMPARTMENT = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide correct information, nevertheless, no rights can be derived from the texts provided.

Condition: used, axle configuration: 3 axles, first registration: 08/2019, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, total length: 14,020 mm, total width: 2,600 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 8,790 mm, color: grey, Year of construction: 2019, Equipment: ABS, tail-lift, = Additional Options and Accessories = - Lift axle - Disc brakes = Notes = DHollandia liftgate: 2000 kg. Thermoking cooling unit Diesel / Electric. Total hours: 4008 H = Further Information = Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tyre tread left: 80%; Tyre tread right: 80% Rear axle 2: Tyre tread left: 70%; Tyre tread right: 70% Rear axle 3: Tyre tread left: 50%; Tyre tread right: 50% Weights Unladen weight: 9,060 kg Payload: 29,940 kg Gross vehicle weight: 39,000 kg Functional Tail lift: Dhollandia Identification Type number: LPRS 24 / LIFT AXLE / THERMO KIN Dkjdpfxeyhdp Dj Al Uon = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) | Wouter Greutink (NL-DE-GB-ES-IT) | We speak Russian. We strive to provide accurate information, however no rights can be derived from the posted texts.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 2 h, Ultimaker Factor 4 – like new / showroom condition This unit has only 2 hours of print time (10 hours total hot time). It was used exclusively as a demonstration printer for a customer who ultimately did not proceed with the purchase. The machine has not been used in production and is in like-new condition. No original packaging. Comes with a full 12-month warranty. UltiMaker Factor 4 specifications: Printing Properties: - Technology: Fused Deposition Modeling (FDM) - Extrusion system: Dual-extrusion, direct drive print head with unique auto-nozzle lifting system and swappable print cores - Build volume: Single/dual material printing: 330 x 240 x 300 mm (13 x 9.4 x 11.8 in) - Filament diameter: 2.85 mm - Print profiles availability: 14+ UltiMaker materials, 250+ marketplace materials - Dimensional accuracy: ± 0.2 mm or ± 0.2% of feature nominal length Hardware Properties: Dsdpfx Aoyvhwisl Uskn - XYZ resolution: 6.25, 7.8, 2.5 micron - Homing sensor: Optical - Build plate: PEI-coated flexible build plate - Build plate temperature: Up to 120 °C (248 °F) - Build volume temperature: Actively controlled up to 70 °C (158 °F) with nozzle plane temperature uniformity within: ± 3 °C (5.4 °F) for temps < 50 °C (122 °F) ± 5 °C (9 °F) for temps < 70 °C (158 °F) - Extrusion flow: Closed-loop flow compensation - Max. extrusion temperature: 280 °C (536 °F): print cores AA, BB, DD 300 °C (572 °F): print core CC 340 °C (644 °F): print core HT - Closed-loop fans: Air filtering fan, air recirculation fans, part cooling fans, print core cooling fan - Compatible print cores: AA (0.25 mm, 0.4 mm, 0.8 mm) BB (0.4 mm, 0.8 mm) CC (0.4 mm, 0.6 mm) DD (0.4 mm, selected regions) HT (0.6 mm) - Material handling system capacity: 6 bays with NFC recognition (max 1 kg spool size) - Material handling system humidity control: Average relative humidity < 15% under all operation conditions - Microparticulate filtration: HEPA H13 - Emission rates (UFP & VOC): UltiMaker filaments below UL-2904 standards - Monitoring: HDR (high dynamic range) 1920 x 1080 px HD camera - Display: 7-inch touchscreen (1024 x 600 px) Connectivity: - Wi-Fi 2.4 & 5 GHz: IEEE 802.11 a/b/g/n/ac - LAN: Gigabit Ethernet - USB: 2.0 System on Module: - NXP i.MX8 Mini Quad (4 x 1.8 GHz), ARM Cortex-A53, 2 GB LPDDR4, 16 GB eMMC - Real time controller: i.MX RT1064, Arm Cortex-M7 600 MHz, 1 MB SRAM Power Requirements: - 100 – 240 V AC, 50 – 60 Hz max., 6A Physical Dimensions: - Printer: 695 x 605 x 1287 mm (27.5 x 24 x 51 in); 120 kg (265 lbs) - Shipping: 760 x 800 x 1587 mm (30 x 31.5 x 62.5 in); 137 kg (309 lbs) Ambient Conditions: - Operating noise: < 50 dBA - Operating temp: 18 °C – 30 °C (64 – 86 °F); humidity: 30 – 70% RH - Storage: 5 °C – 40 °C (41 – 104 °F); humidity: 20 – 90% RH Software: - Print job preparation: UltiMaker Cura 5.7.1 or newer - Print job management: UltiMaker Digital Factory - Supported file types: STL, OBJ, 3MF; printable formats: G, GCODE, UFP, STEP - System requirements: Windows 7 (64-bit), Mac OS X 10.12, OpenGL 2.1, 4 GB RAM (8 GB recommended) - Print process reporting: Supported

Condition: used, mileage: 230,556 km, power: 368 kW (500.34 HP), first registration: 09/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total length: 10,320 mm, total height: 3,450 mm, loading space length: 6,430 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Alarm system - Remote-controlled central locking - Lift axle - Air suspension - Towing jaw coupling - PTO - Radio - Rear view camera - Disc brakes - Sun visor - Lane departure warning system Dkedpfx Aev Uin Isl Uon - Auxiliary heater - Toolbox = Notes = Volvo FM 500 6x2*4 Lift and steering axle. Full air suspension. HMF 3220 K7 4 x hydraulic outriggers. 7 x hydraulic extensions. Scanreco radio remote control. 4.70 m - 5,910 kg. 6.50 m - 4,000 kg. 8.40 m - 2,870 kg. 10.30 m - 2,170 kg. 12.40 m - 1,710 kg. 14.50 m - 1,400 kg. 16.70 m - 1,190 kg. 18.90 m - 1,040 kg. = Further Information = Technical Information Number of cylinders: 6 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tyre size: 385/65R22.5; Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle 1: Tyre size: 295/80R22.5; Twin tyres; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Rear axle 2: Tyre size: 385/55R22.5; Steered; Tyre tread left: 70%; Tyre tread right: 70% Weights Kerb weight: 16,537 kg Payload: 11,463 kg Gross weight: 28,000 kg Functional Crane: HMF Environment Emission class: Euro 6c Financial Information Price: On request Identification Type number: FM500 / HMF32TM / 6x2 / CRANE/KR = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Russian spoken. We strive to provide accurate information; however, no rights can be derived from the descriptions presented.

Condition: used, mileage: 114,759 km, power: 118 kW (160.44 HP), first registration: 11/2015, fuel type: diesel, tire size: 215/75R17.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 6,900 mm, total width: 2,350 mm, total height: 3,100 mm, loading space length: 4,950 mm, loading space width: 2,220 mm, loading space height: 900 mm, Year of construction: 2015, Equipment: ABS, AdBlue, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Air suspension - Radio - Sun visor - Toolbox = Further Information = Tire size: 215/75R17.5 Brakes: Disc brakes Front axle: Steerable; left tire tread: 75%; right tire tread: 75%; suspension: leaf springs Rear axle: Twin wheels; left inner tire tread: 50%; left outer tire tread: 50%; right inner tire tread: 50%; right outer tire tread: 50%; suspension: air suspension Unladen weight: 4,335 kg Payload: 3,665 kg Gross vehicle weight (GVW): 8,000 kg Price: On request Type number: 8-160L OPRIJ / MACHINE TRANSPORT = Company Information = Dkodpfx Aljy Dz Scs Uon ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information; however, no rights can be derived from the posted texts.

Condition: excellent (used), incl. case, charging socket, measuring cable 16 GB memory card Dkjdpfx Ajy Edb Nol Uen

Condition: like new (used), functionality: fully functional, measuring range X-axis: 190 mm, measuring range Y-axis: 190 mm, overall weight: 33 kg, workpiece weight (max.): 7 kg, travel distance X-axis: 200 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 75 mm, repeat accuracy: 0.002 mm, The measuring projector features a standard digital measuring mode: 300 mm × 200 mm (4× R50) and a precision measuring mode: 225 × 125 mm. It is equipped with a height sensor and a photo sensor. Accessories include a flat stylus, power cable, and control unit. A mouse and keyboard are also included in the scope of delivery. • Measuring head: Digital measuring projector with 300 x 300 mm measuring field • Light barrier • Height sensor Dsdpfsy Edt Esx Al Ujkn • Display: 10.4" (XGA: 1024 × 768) • Image sensor: B/W CMOS, 1", 6.6 megapixels • Lens system: Double telecentric lens • Flat stylus • Hard drive: 500 GB Price: €25,000 net for the device only Price: €26,000 net with table

Condition: new, Year of construction: 2026, machine/vehicle number: VT0876, functionality: fully functional, SPINNER VC1150 Travel paths: X 1150 mm, Y 620 mm, Z 600 mm In “Compact” configuration Extremely robust cross-slide design for high-performance machining With patented guideway cover concept, providing uniquely optimized chip flow and a compact footprint High-performance MILLING SPINDLE up to 10,000 rpm with belt drive For exceptionally high torque Mmax = 119 Nm, Pmax = 16 kW Suitable for universal machining applications in mechanical engineering Tool interface at spindle: SK40 DIN69871 with pull stud DIN69872-A / ISO 7388-3-AD TOOL MAGAZINE with 32 tool stations SIEMENS 840DE control system including: - Operator panel adjustable in height and rotatable for optimal ergonomics - 19" LCD flat color display with multi-touch functionality - Includes engraving cycles - User memory 2 GB - 15 zero point offsets - 1 free USB interface - Standard Ethernet interface PORTABLE HANDWHEEL SHOPMILL 3D simulation of finished part REMAINING MATERIAL DETECTION DXF reader PROBING FUNCTIONS for integration of measuring probe UNIVERSAL CHIP CONVEYOR VC1150 SPINDLE PREPARATION FOR HIGH PRESSURE for utilization of auxiliary tank up to 22 bar Additional blow air at spindle head PREPARATION FOR SPINNER STANDARD PROBE STANDARD DOCUMENTATION IN GERMAN Operating voltage 3x400V +/-10% Line frequency 50Hz (+/-2%) TN system (5-wire) PACKAGING Notes: Djdjxn R Daopfx Al Uskn The price includes warranty services only within Germany. For new and demo machines, the images shown are not necessarily those of the individual machine, but are from similar machines. Depicted accessories such as clamping devices or tool holders are only included in the delivery scope if listed in the technical description. Request a detailed quote ex works. Visit our factory near Munich or one of our showrooms. We may have additional offers for comparable machines. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 2,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, number of axes: 4, This 4-axis VOORTMAN VACAM VCS Thermo was manufactured in 2013. It features a working length of 3000 mm and a working width of 1500 mm, equipped with a Kjellberg HiFocus 280i plasma cutting unit capable of cutting up to 70 mm thickness. The machine offers a cutting speed range of approximately 0 – 5200 mm/min. If you are looking to get high-quality plasma cutting capabilities, consider the VOORTMAN VACAM VCS Thermo machine we have for sale. Contact us for further details. • Working area: 3000 mm (length) x 1500 mm (width) • Machine structure: Heavy steel frame construction; portal gantry design • Material support: Sectional support bed • Plasma cutting unit: Kjellberg HiFocus 280i • Max plasma thickness: up to approx. 70 mm • Cutting capacity (steel): 6 / 12 / 20 / 25 / 30 / 40 / 50 / 70 mm Dksdpfsyu Th Ajx Al Uon • Cutting speed range: approx. 0–5200 mm/min • Positioning speed: approx. 12,000 mm/min • Positioning accuracy: ±0.1 mm • Control system: VACAM CNC control • Software: VACAM Machine Edition; VACAD; VANEST • Industrial PC: Intel Core 2 Duo; 2 GB RAM; SSD storage; Ethernet connection; touchscreen monitor; keyboard; USB ports • Automatic torch height control: HT4000 PCS • Laser pointer: Yes • Electrical connection: 230 V, 1 phase, 50 Hz • Compressed air requirement: Operating pressure approx. 6 bar • Noise level (idle): approx. 70 dB • Safety equipment: Emergency stop buttons; emergency stop cable; protective safety systems • Material types: Steel; structural steel; sheet metal Additional equipment • TEKA Filtercube 4H extraction unit (filter system)

Condition: used, Year of construction: 2009, functionality: fully functional, type of input current: three-phase, power: 5.5 kW (7.48 HP), input voltage: 400 V, temperature: 250 °C, input frequency: 50 Hz, heating capacity: 68 kW (92.45 HP), volume flow: 80 m³/h, fuel: domestic gas H, We offer this used Wieland WA-TR-GB Powder Drying Oven, year of manufacture 2009. Manufacturer: Wieland-Apparatebau GmbH Type: WA - TR - GB Order number: 49644 Approved for: Powder drying Year of manufacture: 2009 Usable volume approx.: 8 m³ Total steam chamber approx.: 12 m³ Dkodjy D Aulspfx Al Usn Fresh air approx.: 80 m³/h Exhaust air approx.: 80 m³/h Recirculating air approx.: 8,500 m³/h Max. recirculating air temperature: 250 °C Heating medium: Natural gas (was converted from propane gas, can be converted back) Heating capacity approx.: 68 kW Adjustable up to max.: 250 °C Voltage: 230/400 Volt Connected load approx.: 5.5 kW Frequency: 50 Hz Equipped with lifting lugs, easy transport by truck! If you have any questions or require more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Djdpfeyt Rrvox Al Uokn Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, cutting width (max.): 1,800 mm, cutting length (max.): 3,200 mm, type of input current: three-phase, total width: 2,830 mm, input current: 32 A, working width: 1,800 mm, total length: 4,120 mm, input voltage: 400 V, cutting height (max.): 50 mm, input frequency: 50 Hz, space requirement height: 3,200 mm, space requirement length: 6,120 mm, space requirement width: 4,830 mm, compressed air connection: 10 bar, Equipment: documentation/manual, safety light barrier, 1. Device Data & Dimensions Working Area: 1800 x 3200 mm Material Passage: 60 mm (cutting thickness depending on tool, up to 50 mm) Standard Equipment: 3-position module carrier, laser pointer, adjustable vacuum, integrated tool initialization (ITI) for 3 modules Dimensions (L x W): 412 x 283 cm 2. Installed Modules & Tools Universal Module UM-ZS: Compatible with various cutting/drawing tools Routing Module (MQL RM-L, 3.6kW, HSK): High-performance milling module (water-cooled) incl. minimum quantity lubrication, cooling unit, pneumatic clamping system, and electronically controlled chip extraction Auto Router Bit Changer (ARC, HSK): Automatic 8-position collet magazine incl. router cleaning and scanning function Cutting Tools: * Universal Cutting Tool (UCT) incl. spring-loaded glide shoe & 2 blade holders (Type 1+3) Electric Oscillating Tool (EOT-250, 2.5 mm stroke, for 1.5 mm blade) incl. spring-loaded glide shoe Accessories: 7x HSK-E 25 collet holders, 1x ER16 collet (Ø 6.0 mm), blade setting gauge (1.5 mm), various router/blade sets 3. Material Handling & Vacuum Vacuum: Automatically regulated turbine (1-15kW, 3-phase 400V) Transport: Conveyor belt G3 L-3200 (without front extension). Material transport 60 for sheets; transport rail for roll/sheet material (Note: Industrial vacuum cleaner not included in the package) 4. Software & Workstation Workstation: Holders for 2 modules, 3 tools & monitor; PC compartment and storage space Software: Zünd Cut Center V3.x (Cut Server, Manager, Editor) Licenses: Cut Queue (auto workflow, unlimited hotfolders) & Routing Option (milling, drilling, engraving) 5. Setup Requirements Space Requirement: Min. 612 x 483 cm (1 m clearance required around the unit) Dksdpfx Aljy Ddmpe Uon Ceiling Height: Min. 320 cm (incl. support frame L-2500 / L-3200) Floor: Flatness +/- 20mm, load capacity min. 200 kg/m² (anchoring recommended) Environment: +10 to +35°C, 10–80% humidity (non-condensing) 6. Power Supply & Connections Power Cutter: 3-phase 400 V (323-457V), 50 Hz. Protection: 32 A (CEE32). RCD: 30 mA / Type B Power Routing Module: 3-phase 345-415 V, 50 Hz. Protection: 32 A. RCD: 30 mA / Type F Power Vacuum (Auto Mode): 370-426 V or 200-240 V. Protection: 16 A (CEE16). RCD: 30 mA / Type A Compressed Air (external): 0.6 - 1.0 MPa, 160 l/min, hose ID 6-7 mm, air purity class 2.4.1 (ISO 8573-1) PC System (not included): Min. Intel Core i7 (3.1 GHz), 8 GB RAM, 20 GB HDD/SSD, Win 10 (64bit), 4x USB, 2x RJ45 LAN, min. resolution 1280x1024

Condition: used, This listing is for the Bioer Quant Gene 9600 Fluorescent Quantitative Detection System The unit is in full working condition and is ready for immediate use Bioer LineGene Plus 9600 FQD-96A – Fluorescent Quantitative Detection System Key Specifications Sample Capacity: 96-well 0.2 mL PCR plates, 12 × 8-strip tubes, or 96 × 0.2 mL single tubes (transparent bottom) Reaction Volume: 5–100 µL Dynamic Range: 1–10¹⁰ copies/µL Detection Channels: 5 or 6 channels (F1–F6) Excitation Wavelength: 300–800 nm Emission Wavelength: 500–800 nm Temperature Range: 4–105°C (0.1°C increments) Temperature Control Accuracy: ±0.1°C Temperature Uniformity: ≤ ±0.3°C Heating Rate: Up to 4.0°C/s Cooling Rate: Up to 4.0°C/s Hot Lid Temperature Range: 30–110°C (adjustable, default 105°C) Gradient Temperature Range: 1–36°C Scanning Mode: Full-plate scanning and designated line scanning (5.5 seconds per scan) Dodpfx Aoxhgfgsl Ujkn Programming: Up to 20 segments per program, up to 99 cycles Operating System Compatibility: Windows 7/8/10 Software Requirements: Microsoft Excel 2000/2002/2003/2007/2012 Minimum Computer Configuration: RAM: 512 MB; Hard Disk: 10 GB; CPU: Pentium 4; Virtual Memory: ≥1000 MB Power Supply: 100–240V, 50/60Hz, 600W Dimensions: 410 mm (W) × 386 mm (D) × 352 mm (H) Weight: Approximately 20 kg Certifications: CE, EMC, RoHS2.0, MET .

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. Dedpfx Aex D Nzpel Uskn • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: ready for operation (used), Year of construction: 2019, total height: 4,125 mm, travel distance X-axis: 1,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,200 mm, overall weight: 5,530 kg, table load: 4,500 kg, number of axes: 3, This 3-Axis Mora Primus 152012 was manufactured in 2019. It features a large measuring range with X-axis at 1500 mm, Y-axis at 2000 mm, and Z-axis at 1200 mm. Supports a maximum load of 4500 kg, ensuring robustness for various tasks. With a vector speed up to 519 mm/s, it offers efficient operations. If you are looking to get high quality measuring capabilities consider the Mora Primus 152012 machine we have for sale. Contact us for more information. Additional equipment • 3-axis CNC controller, Pantec SP25/SP600 interface, EAGLE PAD joystick (6.5 m) • Renishaw PH10M (720 positions, 7.5°) + PHC10-2 controller • Renishaw SP25M full kit: SM25-1/-2/-3 (with SH25-1/-2/-3), TM25-20 adapter; extra SM25-4 (with SH25-4) & SM25-5 (with SH25-5) • Extensive M2/M3 stylus kits (Ø 0.3–30 mm, extensions), M2↔M3 / M3↔M2 adapters • FCR25 + FCR25-TC (3+3-port, temperature-controlled) with MRS1000/MRS600 rail system • Ø 30 mm reference sphere • INCA3D Premium (DCC): Shape Deviation, Path Wizard, Simulation, Statistics, Excel reports, graphical programming, CAD import IGES/STEP, Master Scan Functions + Assist SP25, FCR25 support, USB dongles (HASPHL) • Industrial PC (e.g., Intel i5, 8 GB, 256 GB SSD, 22″ monitor, Windows 10) + color laser printer Machine Benefits Qualitative Machine Benefits • Condition: new, factory-sealed, immediate availability Technical Machine Benefits • Accuracy (iso 10360, typical with sp25m): mpee 3. 0 + l/300 µm | mpep 3. 0 µm | mpe_thp 4. 4 µm / 68 s • Dynamics: up to 519 mm/s | 1,732 mm/s² • Probing/scanning: renishaw ph10m + sp25m (sm25-1…-5), fcr25/fcr25-tc (temperature-controlled) • Software: inca3d premium (iges/step, scan options) • Operating conditions: 20 °c ±2 °c; temperature gradients ≤ 1 °c/h and ≤ 1 °c/m • Pneumatics: 6 bar, dry and oil/particle-free Djdpfx Ajyaacqjl Uokn • Power (controller): 90–240 v, 50/60 hz, 16 a; approx. 600 va (psu up to 2,000 va) Dimensions Machine Depth 2505 mm

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Dedpfoyaimlex Al Uokn Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Dkedpfx Alex D Ix Tj Uon Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar Dksdpfx Alsx D E Hbe Uon • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: good (used), functionality: fully functional, Adlink MXC-6321D(G) Fanless Embedded Box PC "Function tested; item originates from the decommissioning of equipment from an automotive supplier." Manufacturer: ADLINK Model: MXC-6321D(G) Fanless Embedded Box PC Processor: Intel Core i7-3610QE (QM77) Expansion slots: 3 × PCI + 1 × PCIe x16 Graphics & Displays: 2 × DisplayPort + 1 × DVI-I (supports 3 independent displays) Interfaces & I/O: 2 × GbE, 4 × USB 3.0, 2 × USB 2.0, 4 × COM, 16-channel isolated DIO Memory & Storage: 2 × CFast, 2 × 2.5" SATA (RAID 0/1), DDR3 (max. 16 GB) Dkedpfjyq R Ulsx Al Uon Input voltage: 9–32 V DC Protection & Operating Conditions: Fanless, -20°C to +55 / +60°C (with option) Weight: approx. 4.3 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 6AV7240-0HC07-0PA0, Siemens 6AV7240-0HC07-0PA0 Multitouch Display Function tested; item was removed from equipment decommissioned by an automotive supplier SIMATIC IPC 477D, 15" Multitouch display; 4 x USB (rear); no USB (front); Ethernet (10/100/1000), Celeron U827E; 2 x Gbit Ethernet (IE/PN); 4 GB RAM; 1 x RS-232; no PCIE; Windows 7 Ultimate, 64-bit; no removable drive; SSD 240 GB Standard (MLC); Dkedpfx Aew Ifdpsl Ujn no SIMATIC software; 24V DC industrial power supply.

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Dodpfx Alsyrf Dks Uskn Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support Dkodpfx Ajwga Hwol Usn - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment Dkedpfx Ajwgaqpjl Uen =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.