Used Carriage for sale (1,872)

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Hnjdpfxsruakgs Alysr Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm Hnedpfxey Ayrrs Alyor cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° total power requirement 4 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Milling length 1750 mm Milling width 260 mm Module - max. 10 Table dimensions incl. water channel 460 x 2100 mm Table clamping surface: 250 x 1850 mm Milling cutter width - max. 100 mm Feed of the milling carriage, infinitely variable 0 - 500 mm/min. Rapid traverse 3000 mm/min Milling head - tiltable + / - 30 ° Speed range of the milling spindle, in 9 steps 29 - 178 rpm Milling head swivels on both sides for helical gearing 30 ° Machine weight approx. 4 t Space requirement approx. 4 x 1.85 x 1.85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - documentation

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, center width: 1,600 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, bed width: 420 mm, controller model: Fagor  8055, TECHNICAL DETAILS Maximum turning height: 275 mm Distance between centers: 1,600 mm Turning diameter over bed: 550 mm Turning diameter over carriage: 310 mm Turning diameter over removable bed: 790 mm Bed width: 420 mm Spindle bore: 82 mm Spindle speed: 80–3,500 rpm Max. workpiece weight: 2,000 kg MACHINE DETAILS Control method: Teach-in Controller: Fagor 8055 Connected power: 15.5 kW Dimensions & Weight Dimensions (L x W x H): 3,600 x 2,150 x 2,200 mm Shipping weight: 5,000 kg Shipping packages: 2 pcs. EQUIPMENT Hnedpfx Aszuwwtolyer CE marking

Condition: used, used dividing system used dividing system consisting of: infeed system Manufacturer: Systraplan Year of manufacture: 1989 Technical data - Siemens S5 control system - Portal infeed system with suction crossbeam - 1 stacking station - 2 stacking stations for collecting protective sheets - Buffer roller conveyor before the infeed system - 1 additional buffer station Dividing saw Manufacturer: Anthon Type: LNB-LNB150 63/33 22 Year of manufacture: 1994 Technical data - Siemens S5 control system - Package height: max. 150 mm - Saw carriage with scoring saw and main saw Paternoster with 2 levels Type: MRB-HUBKORB-EHK-3 Technical data - For collecting identical packs of strips for optimal utilization of the cross-cut saw Destacking Liftomat Manufacturer: Holzma Type: HAU A 25/8, HAU B 25/8, HAU A 25/12, HAU B 25/12 Year of manufacture: 2004 Technical data - 4 storage spaces with roller conveyor lifting station (Liftomat) - Pit required - Buffer roller conveyor after destacking Waste disposal system consisting of a cut-off machine and a shredder Cut-off machine Manufacturer: Holzma Type: Cut-off machine Year of manufacture: 1996 Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Technical data Hnodozuzigopfx Alyor - Cut-off machine for longitudinal sections - Conveyor belts and consolidation of longitudinal and cross-cut sections - Horizontal shredder Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2018, Panel dividing saw Manufacturer: Homag Type: Profi HPP300/43/43 Year of manufacture: 2018 Technical data Cutting length: 4,300 mm Cutting width (programmable sliding table): approx. 4,250 mm Max. feed rate of the saw carriage: 130 m/min Optional saw carriage feed rate up to 150 m/min Saw blade projection: 80 mm (optional 95 mm) Max. saw blade diameter: 350 mm Main saw motor: 11 kW Scoring saw, motor-adjustable Clamping jaws: 7 pieces (2-finger design) Hsdpfezuy N Sjx Alyjnr Control system: CADMATIC 4.1 / 4.5 or powerTouch Total connected load: approx. 18.4 kW Compressed air: 6 bar CE marking Package thickness up to approx. 80 mm (standard) Max. saw blade: 350 mm Main saw blade: 350-380 mm, depending on configuration Scoring saw motor: 1.5-2.2 kW Extraction capacity: approx. 3,350-5,230 m³/h Processing: Single sheets and package cuts Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Type: HPP 350/43/38 Year of manufacture: 2008 Hnedpjzuy N Esfx Alyor Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Panel dividing saw Manufacturer: HolzHer Type: 6310 CUT 110 Year of manufacture: 2007 Technical data - Cutting length: 4250 mm - Cutting width: 5250 mm / reduced by 2550 mm to 2700 mm - Display on the right - Cut Control control system with touch screen operation - Angle pressing device on the right - Saw carriage with main/scoring saw control - Power: 18.5 kW / 2.2 kW - Manual adjustment of scoring saws in width and height - Grooving device with 2 groove height settings (groove depth adjustable from 2-12 mm, up to max. 9-19 mm) - Label printer TLP2742 - Cut-out device - Additional blowing device on the saw carriage - 3 additional support tables, 2400 mm, with drive system - Control cabinet on the machine side including speed monitoring with safety shutdown - Postforming unit including scoring unit - Automatic central lubrication - Closed pressure beam - Film cutting device Optional, at an extra charge: Extraction system Manufacturer: AL-KO Type: POWER UNIT 300P Hodjzuy Nlspfx Alyenr Year of manufacture: 2011 Technical data - V = 5089 m³/h - Vacuum: 2050 pA - Motor power: 7.5 kW - Suction nozzle 300 mm - 3 collection containers, 250 l each - Integrated extinguishing system Note: The technical data and descriptions are copies of the original order confirmation. The information is for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, Circular saw complex Manufacturer: WoodVER Type: UPK-1 Year of manufacture: 2022 Technical data Maximum diameter of the log being processed: 1000 mm Length of the log being processed: 2.0 - 6.5 m Saw diameter: 550 mm Saw rotation speed: 1500 (3000) RPM Power of the main motors: 2 x 18.5 kW Productivity: 12 - 20 m3 / shift - Automatic feed of the carriage with adjustable travel speed - Digital ammeter integrated into the control panel - Three-part frame with two guides for perfect geometry - Remote control with CNC system - Three-stage soft start system - Laser pointer for cutting lines - Digital cameras with an 18.5-inch display, installed in the remote control - Four hydraulic side clamps, four end clamps - Hydraulic log tilting device that performs the function of log tilting and simultaneously serves as the log centering device on the frame. - Scraper conveyor Note: Hsdpfx Alozuy Axeyjnr The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails Hnodjzuyywopfx Alyor - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AE/034421, functionality: fully functional, cutting height (max.): 67 mm, cutting width (max.): 2,200 mm, saw blade diameter: 320 mm, cutting length (max.): 4,150 mm, spindle speed (max.): 5,000 rpm, TECHNICAL DETAILS Cutting length max.: 4,150 mm Cutting width max.: 2,200 mm Cutting height max.: 67 mm Saw blade diameter max.: 320 mm Saw blade bore diameter: 80 mm Hnjdpozulxfefx Alysr Spindle speed min.: 1,000 rpm Spindle speed max.: 5,000 rpm MACHINE DETAILS Voltage: 400 V Current consumption: 21 A Fuse: 32 A Power: 8.4 kW Power, main motor: 9.0 kW Total weight: 4,000 kg Shipping packages: 4 pcs. EQUIPMENT Software Wincut 12.2.9 Documentation CE marking The following data is taken from the machine's data sheet (see last image): TECHNICAL DETAILS Sawing unit Diameter of scoring saw blade: min. 160 mm / max. 280 mm Speed of scoring saw blade: min. 1,600 rpm / max. 7,000 rpm Cutting length: min. 1,600 mm / max. 4,500 mm Feed rate of saw blade: min. 0 m/min / max. 100 m/min Drive power Power, main saw motor: min. 5.5 kW / max. 8 kW Power, scoring saw motor: min. 0.75 kW / max. 2.2 kW Power, saw blade feed motor: min. 0.75 kW / max. 0.75 kW Power, feed/return motor of the carriage: min. 0.55 kW / max. 0.75 kW Carriage Carriage travel: max. 4,600 mm Feed rate of carriage: max. 25 m/min Return speed of carriage: max. 70 m/min

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X396V01548, Year of construction: 2019, operating hours: 14,144 h, load capacity: 8,000 kg, lifting height: 5,878 mm, fuel type: diesel, mast type: duplex, fork length: 1,500 mm, TECHNICAL DETAILS Lifting height: 5,880 mm Lifting capacity: 8,000 kg Fork length: 1,500 mm Minimum fork width: 400 mm Maximum fork width: 1,750 mm MACHINE DETAILS Hnjdpfx Aezulnajlyjr Mast type: Duplex Number of wheels: 4 Fuel type: Diesel Engine manufacturer: Deutz Operating hours: 14,144 h Dimensions & Weight Transport dimensions (L × W × H): 3,300 × 2,232 × 4,100 mm Unladen weight: 13,050 kg Transport packages: 1 EQUIPMENT 3rd and 4th hydraulic valve on the fork carriage Documentation CE marking

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516226Y00728, Year of construction: 2022, operating hours: 3,422 h, load capacity: 1,600 kg, lifting height: 4,598 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, TECHNICAL DETAILS Hedpfxszullle Alysnr Lifting capacity: 1,600 kg Lifting height: 4,598 mm Free lift: 1,470 mm Fork length: 1,200 mm Fork width min.: 200 mm Fork width max.: 900 mm MACHINE DETAILS Mast type: Triplex Number of wheels: 4 Drive type: Electric Battery brand/type: 05 EPZS 0625 Battery year of manufacture: 2021 Battery capacity: 625 Ah Battery voltage: 48 V Carriage length: 830 mm Carriage width: 630 mm Carriage height: 630 mm Operating hours: 3,422 h Dimensions & Weight Dimensions (L x W x H): 2,030 x 1,090 x 2,040 mm Unladen weight: 3,883 kg EQUIPMENT Side shift Non-marking tires Work lights User documentation CE marking

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Hnedpfx Aozuwyzjlyor Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Year of construction: 2020, operating hours: 100 h, condition: excellent (used), functionality: fully functional, overall weight: 300 kg, total length: 1,330 mm, total width: 840 mm, total height: 1,870 mm, compressed air connection: 6 bar, type of input current: AC, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame Hnodpfexuqtbex Alyor - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 100 h, functionality: fully functional, overall weight: 300 kg, Tray-Loader TL-6040 - 2-lane stack-on module for the economical transport of trays (boxes) for printed circuit boards. The empty trays are removed from the transport carriage, automatically positioned and made available for assembly. After placement, the trays are automatically destacked on a 2nd transport trolley. - Compact design - Small floor space - Stacking module - Transport trolley - Standard tray size: 400 x 600 mm - Sturdy welded steel frame - W x D x H: 840 x 1,330 x 1,870 mm - Manual operating height: 930 - 1,050 mm - Compressed air 0.6 mPa (6bar), oil-free, filtered, dry - Average consumption approx. 10l/min Hsdpfjunh I Nex Alysnr - Ambient temperature +18°C - + 30°C - Weight approx. 300 kg

Condition: used, 4000 + 5000 mm Working width 250 mm Wheel width 250 mm roll diameter 60 mm work height max. 880 ± 60 mm Feed and Discharge Roller Conveyor Hedpezughhsfx Alysnr Feed Roller Conveyor, Length 4000 mm: * Roller conveyor without scale or stop, with side guides * Conveyor width 300 mm, usable roller width 250 mm Outfeed roller conveyor, length 5000 mm: * Length measuring device with mm scale and reading magnifier on the stop carriage * Measuring track with manual measuring system and a sturdy precision flat steel guide * Conveyor width 300 mm, usable roller width 250 mm

Condition: new, diameter / mm Hnedpfx Aloy S Dr Isyjr Cutting (quantity) / 0 weight / kg REXROTH R168180055 Linear guide carriage Condition: New, including packaging

Condition: used, Year of construction: 2007, Saw blade overhang 95 mm Saw carriage feed: forward 1-130 m/min reverse constant 130 m/min Program slider speed: forward 80 m/min reverse 80 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control yes Cutting height automatic yes Adjustable pressure beam clamping force yes Adjustable clamping chuck clamping force yes Complete dust extraction on machine table (saw body) yes Angle backstop device min. backstop width 0 mm max. backstop width complete cutting length Main saw motor 18.0 kW Pre-scoring saw motor 2.2 kW Operating voltage 400 V / 50 Hz Electrical connection value for high-performance motor: 18.0 kW = 24 kW 21.0 kW = 27 kW Working height 920 mm Paint finish structural paint gray RDS 240 80 05 Main saw blade 380 x 4.4 x 60 mm Pre-scoring saw blade 180 x 4.4 - 5.4 x 45 mm Required air pressure 6 bar Compressed air consumption 150 NL/min V at the extraction nozzle approx. 26 m/s Negative pressure min. 1200 Pa Exhaust air volume 4600 m³/h Extraction connection chip channel 1 piece 200 mm Extraction connection pressure beam 1 piece 150 mm HPP 380/43/43 Cutting length 4300 mm Cutting width (program slider travel) 4250 mm Roller rail (element 10-track) 1 piece Roller rail (element 2-track) 5 pieces Clamping chucks 7 pieces of which the first 3 pieces are two-finger, all others are single-finger Spacing 75/275/475/1050/1850/2650/3450 mm measured from the angle ruler to the center Clamping chuck 2 additional two-finger clamping chucks possible Pos. 175/375 mm 1 additional single-finger clamping chuck possible Pos. 650 mm 4 manual trimming fences on clamping chucks Pos. 75/475/1050/2650 mm Air cushion table with roller element 2160 x 650 mm 4 pieces Central blower 1 piece Nozzle spacing of the air cushion tables 70 x 70 mm Angle cutting device (automatic) Angle cutting faster and more precisely than ever before, with patented angle cutting clamping chuck. Technical data Max. panel thickness: 48 mm Min. leg length at 45°: 115 mm Angle accuracy at 1000 mm: 0.1° Min. cutting angle: 0.0° Option 6085 'Angle cutting mask' required. Groove program (manual) Type 180/230/250/350/380 Groove program with graphic input and process graphics. Groove depth manually adjustable. Hjdpfezuph Dsx Alyjnr Turbo grooves Type 350/380/510/530/550/570 Longitudinal grooves with the main saw in forward and reverse. Especially suitable for bending parts. Note: Grooves in reverse are not 100% tear-free. Cut-out/stress-relief cutting program Consisting of: - Cut-out program - Insert grooves (option 6055 or 6050 required) - Stress-relief cut (1-stage/2-stage/3-stage) Positioning accuracy +/- 2 mm Without hydraulic stop! Label program 350/380/11/510/530/550/570/33 Label printer Type PICA 104 Thermo / Thermal transfer label printing station Angle cutting mask CADMATIC In the case of angle cuts, this software provides automatic stop control, so that a time-consuming manual alignment of the material on the cutting line is no longer necessary. Data transfer Online + USB port Optimization software “CADplan JUST-IN-TIME” The lifting device shown in the pictures is not included.

Condition: used, Year of construction: 2020, operating hours: 11,887 h, lifting height: 4,620 mm, free lift: 1,480 mm, fuel type: electric, mast type: triplex, fork length: 1,090 mm, fork width: 970 mm, total height: 2,060 mm, total length: 1,900 mm, total width: 1,100 mm, color: silver, Empty weight: 3.100 kg Lifting capacity: 1.600 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516221X00678 - Operating hours: 11887 - Lifting capacity: 1600kg - Lifting height: 4620mm - Overhead clearance: 2060mm - Free lift: 1480mm - Fork length: 1090mm - Maximum fork width: 970mm - Minimum fork width: 220mm - Number of wheels: 3 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Free-lift, Joystick, Non-marking tires - Mast: Triplex - Drive: Electric - Battery information: - └ Brand/Type: 05 FPZS 0625 SC - └ Battery year of construction: 2020 - └ Capacity: 625Ah - └ Battery voltage: 48V - └ Tray length [mm]: 830 - └ Tray width [mm]: 62 - └ Tray height [mm]: 520 - Transport dimensions: 1900mm x 1100mm x 2060mm (l x w x h) - Transport weight [kg]: 3100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hnsdpjzgc E Tjfx Alyor Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg In very good condition. In 2017 Refurbished for €32.000 - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg Hnjdpeztxl Nofx Alysr - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2017, operating hours: 9,000 h, Type of fuel: LPG Colour: Yellow Empty weight: 4.170 kg Dimensions (LxBxH): 250 x 122 x 277 cm Lifting capacity: 2.500 kg Lift height: 433 cm Fork dimensions: 1.200 x 1.010 mm - Year: 2017 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: D875B04618R - Operating hours: 9000 - Lifting capacity: 2500kg - Lifting height: 4330mm - Overhead clearance: 2790mm - Free lift: 0mm - Fork length: 1200mm - Maximum fork width: 1010mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift, 4th valve to fork carriage Hodpfx Asztu I Tslysnr - Options: Work lights - Mast: Duplex - Drive: LPG - Motor brand: PSI - Transport dimensions: 2500mm x 1220mm x 2770mm (l x w x h) - Transport weight [kg]: 4170kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Year of construction: 2006, operating hours: 6,744 h, lifting height: 4,000 mm, free lift: 1,120 mm, fuel type: diesel, mast type: triplex, fork length: 1,300 mm, fork width: 1,180 mm, total height: 2,000 mm, total length: 2,930 mm, total width: 1,350 mm, color: orange, Empty weight: 6.400 kg Lifting capacity: 4.000 kg - Year: 2006 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 10171 - Operating hours: 6744 - Lifting capacity: 4000kg - Lifting height: 4000mm - Overhead clearance: 2000mm - Free lift: 1120mm - Fork length: 1300mm - Maximum fork width: 1180mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Half cabin, Free-lift, Joystick - Mast: Triplex - Drive: Diesel - Motor brand: Toyota 14Z - Transport dimensions: 2930mm x 1350mm x 2000mm (l x w x h) - Transport weight [kg]: 6400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hsdpozkkd Eofx Alyenr Koen van Lent

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) Hnodpszt Twyefx Alysr 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: excellent (used), Year of construction: 2020, VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge and electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: P300 PROFI Crane System Year of manufacture: 2020 Machine type: Two-rail portal crane / workshop crane Description For sale is a used VETTER PROFI crane system, type P300, in a robust two-rail portal design with crane bridge, manual trolley, and electric chain hoist. The system was designed for industrial workshop operation and is ideally suited for assembly, production, mechanical engineering, maintenance, logistics, and material handling. The design complies with the crane classification HC2 / S2 according to EN 15011 and has a load capacity of 1,600 kg. Documentation, test book, and conformity documents are available. Technical data of the crane system Manufacturer: Vetter Krantechnik GmbH Type: P300 Year of manufacture: 2020 Load capacity: 1,600 kg Crane classification: HC2 / S2 according to EN 15011 Operating mode: Workshop crane Control: Floor control Mounting: Composite anchor system Span: 5,100 mm Support spacing L: 5,590 mm Support spacing B: 5,100 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Beam length: 6,170 mm Bottom flange of crane bridge: 4,145 mm Bottom flange of portal beam: 4,567 mm Overall height: 4,905 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Steel structure group: 18/36/30 Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Drive group: FEM 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Operating voltage: 400 V 3 PH / 50 Hz Control voltage: 24 V Manual trolley / travelling carriage Type: SiCO-HF 2000 A Design: Manual trolley Beam width: 66 - 220 mm Load capacity: 2,000 kg Self-weight: 17 kg Equipment - Two-rail portal crane system - Crane bridge - Electric chain hoist SIXX8AF - Manual trolley SiCO-HF 2000 A - Load hook - Floor control - Mains connection switch - Steel supports and beam structure Hsdpfjzgtzlox Alysnr - Composite anchor system - Documentation available - Test book available - EC declaration of conformity available Transport data Longest component: approx. 6.2 m Heaviest individual component: approx. 300 kg Total weight of the system, based on experience, approx. 2,000 - 3,500 kg Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Logistics Material handling Condition Used, functional, dismantled from ongoing operation. Optical condition according to pictures. Test book and technical documentation available. Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual trolley SiCO-HF 2000 A Support and beam structure Floor control Mains connection switch Test book EC declaration of conformity Documentation Accessories according to pictures (Changes and errors in the technical data are subject to change.) Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2013, CNC Panel Saw for wood and wood-based materials manufactured in 2013. This PANHANS S45 Speed features a maximum cutting length of approximately 4,200 mm and a cutting width of around 3,200 mm. It includes an automatic tilting saw blade for precise angular cuts and a modern CNC/PC control system. If you are looking to get high-quality cutting capabilities, consider the PANHANS S45 Speed machine we have for sale. Contact us for further details. • Condition: Excellent – fully functional, very well maintained, low usage, ready for immediate operationTechnical specifications • Max cutting length: approx. 4,200 mm (depending on configuration) • Max cutting width: approx. 3,200 mm • Saw blade tilting range: 0° to approx. 45° • Max cutting height at 0°: approx. 72 mm • Main saw motor power: approx. 14 kW • Scoring blade diameter: approx. 180 mm • Saw carriage feed speed: up to 100 m/min (forward/backward, Speed version) • Control system: CNC/PC controlEquipment and features • Automatic tilting saw blade for angular cuts • Optimized cutting cycles (single, multiple, batch) • Program-controlled pusher for accurate positioning • Integrated scoring unit for clean cuts • Air tables (3x) for easy handling of large panels • Format and angular cutting system Additional equipment Hjdpfx Aljzuhbceyjnr • Saw blades • Scoring blades • Optional optimization software