Used Shark for sale (83)

Condition: used, Year of construction: 2009, Large, robust saw from the renowned manufacturer MEP SHARK CCS HYDRA - Fully semi-automatic - Cutting diameter for round stock: 300 mm - Capacity: 320x260 mm - Swivel LEFT/RIGHT - Saw band: 3320x27x0.9 mm - Coolant pump - Automatic vise pressure - Machine weight: 700 kg - Original roller table (100 kg) - Includes 3 new saw bands - Original documentation Codpfx Akjy Ani Estsri The machine is original, in very good technical condition, ready for operation. Can be viewed in Głosków near Warsaw.

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, IQF BERRIES FULL CLEANING-PACKING LINE EQUIPMENT FOR SALE All in good working condition serviced and prepared for work. Capacity 1500kg per hour depending on raw material. Previously used for cleaning and packing IQF Wild Bilberries, Lingonberries, Cranberries. Possible to adjust line also for other cultivated berries (red, black currants, sea buckthorns and others). Line consists of 18 different equipment units. Video is also available on request. 1. Container tripler – MEGA 2013 2. Bunker hopper with breaker – MEGA 2013 3. Vibration sieve for bunker – MEGA 2013 4. Screw conveyor – MEGA 2013 5. Air separator – JAM 2009 Credpfxezy Rcgj Aktji 6. Stalk removing machine – JAM 2009 7. Polishing machine – JAM 2009 8. Screw conveyor – JAM 2009 9. Vibration sieve with ventilator 10. Vibration table for spreading berries 11. Laser Sorter BEST (Tomra) LS9000 with EOS upgrade 12. Air compressor for laser sorter - M-Press - 2106 13. Belt conveyor for manual inspection 14. Cassel X-ray Scanner 2020 15. Lifting conveyor 16. Dosing machine – MEGA 2013 17. Roller conveyor with control scale – MEGA 2013 18. Metal detector – Mesutronic 2013

Condition: good (used), Year of construction: 2019, functionality: fully functional, A complete shredding system is for sale. Crodpfx Aez Ixfiektei The machine can be inspected at any time.

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm Csdpfx Aks Agcl Estjri capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: excellent (used), Year of construction: 2016, operating hours: 7,260 h, functionality: fully functional, Willibald EP5500 Shark waste shredder, manufactured in 2016. In perfect condition and ready for operation, with 7,260 operating hours. Credpfx Aszrv Huoktji

Condition: defective spare-parts repository (used), Year of construction: 2000, functionality: limited functionality, Equipment: lighting, This machine has served us well in our workshop for a long time. Unfortunately, the electronics appear to be defective. Credpfx Akjz Dgmmotsi Therefore, we had to purchase a new one. Available for self-collection in Krostitz.

Condition: excellent (used), Year of construction: 2009, operating hours: 10,720 h, functionality: fully functional, Willibald EP 5500 Shark in excellent condition and ready for work. Credpfx Aksy Iwgkjtsi

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M60L/8583, Offer Number: M60L/8583 Machinetype: screw washing machine Make: MOC DANNER Type: Shark 100 Constr. year: 2014 Crodpfx Aswi Swyjktsi capacity: 250 Kg setting plane: output: Location: In our warehouse

Condition: as good as new (ex-display), Year of construction: 2024, type of input current: DC, cutting height (max.): 285 mm, cutting range round steel at 45°: 230 mm, cutting range round steel at 90°: 250 mm, saw band length: 2,950 mm, saw band width: 27 mm, Title MEP SHARK 282 CCS [with semi-automatic lowering] Article number SH282CCS Motor power 1.5/1.8 kW Belt opening 285 mm Belt dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min. Cutting surface 0° 250 / 220x220 / 280x220 Cutting surface 45° right 230 / 200x200 / 220x200 Cutting surface 45° left 200 / 170x170 / 200x140 Cutting surface 60° right 120 / 80x80 / 140x80 Cutting surface 60° left Description MEP sawing machine: Basic equipment: Vice with quick adjustment and adjustable guide rails Hydraulic band clamping device with clamping pressure indicator Underframe with removable coolant tray Chip clearing brush Adjusted precision stops for cuts of 0°, 45° and 60° left and 45° right Length stop for cuts of the same length Material support arm, simultaneous connection option for roller conveyor/loading side Turntable for double mitre cuts Machine is designed for pallet truck/forklift transport M2 bi-metal band saw blade for solid and profiled material Tools and operating instructions Electrical equipment: Control panel labeled cable connections Control lamp for operational readiness Main safety switch Emergency stop button Speed changeover switch Thermomagnetic protection Undervoltage release Control handle IP 55 protected Phase comparator Low voltage system 24 Volt Electrical coolant system 48 V (attachment of a micro-spraying device possible) Motor 1.5/1.8 KW 2 speeds 36/72 m/min. Crjdpfozzkthjx Aktei Vice opening 285 Saw band 2950 x 27 x 0.9 Weight 440 kg

Condition: reconditioned (used), functionality: fully functional, overall weight: 400 kg, USED SEMI-AUTOMATIC SAW WITH PNEUMATIC VISE, MEP SHARK 280, Crsdpfez H Ixpox Aktji

Condition: good (used), Year of construction: 2001, Used band saw from MEP Crsdpfx Akez Spxcjtji Type: Shark 270SC Capacity: 270 x 190 mm Double-sided miter cut capability Automatic lowering/raising and clamping

Condition: good (used), Year of construction: 2014, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive Credpezkbn Usfx Aktei and not less than 300 mA.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Crsdpszi Ackofx Aktji Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: excellent (used), Year of construction: 1995, operating hours: 123 h, Technical Description – Cassel Metal Shark® Octa Product Description: The Metal Shark Octa is an industrial metal detection system with an octagonal aperture, specifically designed for the reliable detection of metal contaminants in bulk materials or products on conveyor belts or in gravity chutes. It detects ferrous, non-ferrous, and stainless steel particles with high sensitivity. Cjdpfx Aoztl Hyjkteri Key Features: Remote monitoring via SHARKNet® software Digital Signal Processing (DSP) for precise and stable detection Octagonal aperture for optimal material flow and detection area High sensitivity – typical detection performance: Ferrous: ≥ 0.8 mm Non-ferrous (e.g., aluminum): ≥ 1.0 mm Stainless steel: ≥ 1.2 mm (depending on the product and size) Automatic calibration and compensation of product effects Touchscreen display with user-friendly, multilingual interface Hygienic stainless steel housing, available in IP65/IP66 Power supply: 100–240 V AC, 50–60 Hz Outputs: Relay, 4–20 mA, digital inputs/outputs, Ethernet, USB Application areas: Food industry, chemical industry, pharmaceuticals, recycling, wood and plastics processing Advantages: Excellent noise suppression Reliable continuous operation 24/7 Easy integration into existing systems Support for HACCP, IFS, BRC, and other QM systems

Condition: reconditioned (used), Year of construction: 2017, operating hours: 5,873 h, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 10,500 mm, total height: 3,400 mm, total width: 2,800 mm, rotor length: 3,000 mm, rotor width: 3,000 mm, rotational speed (max.): 31 rpm, year of last overhaul: 2026, Doppstadt DW 3060K Buffel Type F Bio Power - Year of manufacture: 2017 Crsdpfx Ako Aarp Eotei - Operating hours: 5,873 - Engine: MTU 6R 1300 (490 hp) - Weight: 30,000 kg - Number of teeth: 42 - Radio remote control - Cable control - Central lubrication system - 7m rear discharge conveyor - Magnetic separator (over-belt) - BioPower system – increased power and efficiency - Tracked chassis - Working shaft: 3000x600 mm Machine has been refurbished and is available immediately. (Komptech Terminator, Tana Shark, Eggersmann, Hammel, Arjes, Lindner, UNTHA)

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Crjdpjy Txb Tjfx Aktsi

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Cjdpowwr Tqefx Aktjri Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: reconditioned (used), Year of construction: 2015, Used automatic hydraulic band saw for metal MEP Shark 230 nc hs 5.0 Automatic auger chip remover Blade size: 2950x27x0.9 Choice of cutting speed with inverterr: from 15-100 m/min Capacity: round 230mm, square 230x230mm Year: 2015 Possibility of cuts also in semi-automatic mode The machine has been fully serviced, the following parts have been replaced: all bearings, reducers, both wheels (pulleys) leaf, hard metal plates in guides, main shaft, coolant pump, two jaws, coolant pipes,yojstick, fans and other consumables. Csdpfx Akstva Nhstori

Condition: good (used), Year of construction: 2002, MEP automatic bandsaw Model Shark 320 AXI Year : 2002 Crsdpsyvzvxefx Aktsi Capacity round : 260 mm. Capacity 45 / 60 degrees : 230 mm. / 150 mm. Capacity square. : 320 x 220 mm. Speed: 40 - 80 m./min.

Condition: used, Year of construction: 2024, Stump Grinder Suitable for Energreen RoboEVO & RoboFIFTI RS Technical Data Grinding Wheel Diameter: 480 mm Grinding Wheel Thickness: 95 (15) mm Grinding Teeth: 2 x 8 with double Widia inserts Approx. Weight: 315 kg L x W x H: 123 x 84 x 55 cm Swing Range: 150 cm Cedjy Eythjpfx Aktori Above Ground Level: 70 cm Below Ground Level: 40 cm (60 cm without grader blade) Working Pressure: 160 to 400 bar Hydraulic Connection: "CEJN" quick couplings We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of both used and new machines in stock, as well as additional equipment available for demonstration. Feel free to contact us! We also rent all equipment with or without operator and machine. Other information: * Trade-ins and purchase of vehicles and machinery possible. * Sale price excludes transport. * No liability for printing or typing errors. * Subject to error, change, and prior sale. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All details provided without guarantee. Further Information New: No

Condition: like new (used), Semi-automatic, electro-hydraulic band saw Crsdpfxszlimbe Aktji Blade dimensions: 2950x27x0.9mm The saw is suitable for cutting solid metals and metal profiles with medium cross-sections up to 280x200 mm at an angle of 0°; Cutting angle range: from 0° to 60° to the left; WITH ADDITIONAL EQUIPMENT - manual and manually dynamic cutting cycle Year of manufacture: 2025

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 240 mm capacity 45 degrees: flat 240 x 160 mm capacity 60 degrees: round 160 mm capacity 60 degrees: flat 150 x 150 mm band speed 15 - 100 m/min dimensions of saw-band 3650 x 27 x 0.9 mm Control MEP CNC total power requirement 2.2 kW weight 1200 kg The MEP SHARK 331 DIRECT is a state-of-the-art, electro-hydraulic automatic bandsaw of the highest caliber. It has been specifically developed for the high-precision cutting of solid materials, pipes, profiles, and metal bars. Thanks to its extremely robust construction and maximum flexibility, it adapts perfectly to any industrial production process. CNC electro-hydraulic automatic bandsaw featuring: * Automatic mode – for fully automated series production * Semi-automatic mode – for controlled individual cuts Technical Highlights & Industry 4.0 Readiness - Direct control technology: * Makes the sawing machine fully digital, networked, and ready for . Seamless integration into automated production lines - Intuitive 10" touchscreen display: * The completely redesigned user interface minimizes staff training time and . ensures smooth process management. - Integrated cutting library: * Once the material dimensions, type, and thickness are entered, the control . system automatically suggests the best saw blade, the ideal cutting speed, . and the optimal force parameters. The operator, however, retains full manual . control at all times. - IIoT-ready & real-time support: * Real-time data transmission enables predictive maintenance, minimizing . downtime. If necessary, technical support can access the control system . directly via secure remote access—no VPN required. - Future-proof safety: * The machine already complies with the stringent safety and efficiency . standards set for 2027. - Massive data storage: * Capacity for up to 100,000 programs and 9,999 cutting sequences. Description: - Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) - MEP CNC "DIRECT" control technology * User interface with an intuitive 10" touchscreen display * Includes mechanical buttons * Ensures reliable, simple, and intuitive operation * Real-time monitoring of all cutting parameters * Swivel-mounted arm for convenient and safe operation * Display and logging of alarms and error messages Crods Afzuuepfx Aktsi * Massive data storage: up to 100,000 programs and 9,999 cutting sequences - Miter cuts—possible on one side up to 60° - Protective enclosure for operator safety - Infinitely variable adjustment * Cutting speed from 15 to 100 m/min * Controlled via frequency converter (inverter) - Latest-generation hydraulic power unit * Highly efficient with low energy consumption - Material feed via stepper motor and recirculating ball screw * Mounted on opposing ball bearings * 600 mm single-stroke capacity, repeatable for cutting any desired length - Coolant tank integrated into the machine base - Chip-clearing brush - Bi-metal saw blade suitable for solid and profile materials - Tools and operating manual, including a spare parts list * Angular accuracy = 2/12 degrees * Length accuracy = ± 0.1 mm per feed stroke Information from the manufacturer – please note: If this saw is installed in a system equipped with a residual current device (RCD/GFCI), i...

Condition: new, Year of construction: 2023, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm table height 860 mm 350 mm 15 - 100 m/min 4,0 kW 2800 kg 2200 x 3200 x 2200 mm Display Model Current list price: 55,910 euros Fully automatic band saws with a two-column guide system for production cuts, particularly in materials that are difficult to machine and solid stock. With this machine, MEP offers you a machine that is at the highest technical level and, thanks to the use of the highest-quality materials, features an unmatched, robust, and torsionally rigid structure. An extremely robust saw frame made of gray cast iron provides the necessary stability, which leads to impressive cutting results, and the sturdy gray cast iron columns on which the saw frame glides via preloaded linear guides ensure ensure the highest cutting precision even under maximum load. The modern machine control system (MEP NC 5.0) offers the user maximum ease of operation and ensures trouble-free operation. (Monitoring/Evaluation/Correction in real time) MAXIMUM PERFORMANCE > The two operating modes (semi-automatic and automatic) enable efficient cutting under all conditions. > The control system allows for the storage of up to 100 cutting programs, each with different quantities and lengths, and minimizes programming time for frequently executed jobs. > The automatically detected starting position of the saw head reduces the setup time. > The saw headâ??s feed via linear guides driven by hydraulic cylinders with preloaded ball screws ensures reduction of mechanical vibrations during cutting and greater stability. > The automatic alignment of the front saw blade guide head based on the dimensions of the bars to be cut reduces processing time. > Saw blade tension is controlled by the brushless motor and is constantly monitored and automatically adjusted to the set minimum value. EXTREMELY FLEXIBLE > The feed system, with a 600 mm stroke, is repeatable and cuts all lengths. > The vertical roller pair allows for holding and aligning any type of bar or bundle that is fed into the machine. > The vector drive for stepless adjustment of the blade speed from 15 to 100 m/min enables the cutting of any material. > The motorized chip conveyor can be mounted to the right or left of the cutting area . FEATURES: Fully automatic control â?? NC 5.0 - Innovative (Windows CE-based) touchscreen control with additional soft- touch buttons for frequently used functions -USB port -Joystick for manual control of the axes (X-Y) -Controlled head descent with automatic compensation via a servo valve , constant monitoring of the preselected torque 4, and with precise feed rate adjustment in millimeters per minute 5 -Adjustment/preselection of the continuously variable band speed in m/min. -Band saw tension with tension monitoring and display via an electronic converter -Automatic detection of the start of the cut -Large 7" color touchscreen for displaying and selecting all machine functions and parameters, and programming in seconds. Display of detailed alarm and error messages -Numerous special functions, including executing various lengths and quantities (10 programs) as a sequence, clean cut, step-by-step execution, and much more. -Sturdy, torsion-resistant, and low-vibration saw frame made of cast steel Csdpfx Akjlf Tu Ueteri -Carbide band guides for maximum cutting precision, hinged for easy saw band replacement -Large, adjustable cast steel idler ...

Condition: new, Year of construction: 2026, Hydraulic Guillotine Shears Hydraulic guillotine shears are advanced machines designed for precise cutting of sheet metal with various thicknesses and hardness levels. Thanks to the use of a hydraulic drive system, they provide high cutting force, enabling efficient processing of even the most demanding materials. The robust construction and modern control systems ensure accuracy, repeatability, and safe operation. These machines are indispensable equipment in industrial plants and workshops involved in metal processing. Technical Specifications Max. sheet thickness (S235): up to 8.0 mm Maximum cutting length: 3200 mm Cutting angle: 1.5° Number of strokes per minute: 10–15 Back gauge travel: 600 mm Motor power: 11 kW Length: 4300 mm Width: 2000 mm Height: 2100 mm Weight: 7800 kg Equipment Motorized rear back gauge (driven by ball screws) Hydraulic sheet metal clamps along the entire cutting length Blade gap adjustment Ball transfer guides on the worktable Working area illumination Front support arms Mobile foot pedal controller Hydraulic Guillotine Shears NC 8x3200 ESTUN E21S Control System Control: Precise positioning of the rear back gauge Cedpfoych Iaox Akteri Program memory: Ability to save up to 40 programs, each with a maximum of 25 steps Retract function: Automatic back gauge retraction after cutting Parameter saving: One-button saving of settings Data protection: Retention of parameters in case of power failure

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds Credpfx Aey Hu H Ejktsi -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg