Band saw

MEP Shark 332 CCS Hydra

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm 350 x 200 mm 250 mm 230 mm 230 x 200 mm Ibsdpfxsu Dbvts Akxsa 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: new, Year of construction: 2024, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) ✔ Power: 30 kW Ibsdpsiq U D Ejfx Akxsa ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m3/h* ✔ Material discharge opening: 200 mm ✔ Filling opening: 1446 x 1565 mm ✔ Dimensions L/W/H: 2,15/1,97/2,04 m ✔ Weight: 2050 kg 2 years warranty or 2000 working hours

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points Ibodpfx Aswwtuijkxsa - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: new, Year of construction: 2026, CORMAK S200R Manual Metal Band Saw The CORMAK S200R metal band saw is designed for both single-piece and series production. With the ability to perform angled cuts from -45° to +60°, it is an ideal solution for cutting pipes, profiles, and solid materials. The construction based on a massive cast-iron arm and a precise blade guidance system ensures high cutting accuracy and repeatability. The feed is gravity-controlled by a hydraulic cylinder with smooth descent adjustment, providing a controlled and efficient cutting process. Main Advantages of the Machine Solid cast-iron construction increases machine durability and cutting accuracy. Wide angle cutting range from -45° to +60° thanks to the rotating arm design. Blade guides with carbide inserts and bearings ensure straight cutting and extended blade life. Gravity feed controlled by a dual-chamber hydraulic cylinder provides smooth and precise cutting. High level of operator safety thanks to limit switches, micro-switches, and an emergency stop button. Automatic stop after completing the cut and blade break protection function improve safety and reliability. Construction and Technology The machine is built on a rigid steel base equipped with an integrated coolant tank and circulation pump. The saw arm is manufactured from a single cast-iron casting, significantly improving stability and vibration damping during operation. The drive system uses a three-phase motor with two blade speeds (36/70 m/min) selectable from the control panel. The arm inclination of 25° relative to the base extends blade life and improves cutting quality. Iedpfx Aksfy Ttijxeba Precision and Work Efficiency High cutting accuracy is achieved through the cooperation of carbide blade guides and rolling bearings, ensuring precise blade alignment. Maintaining optimal blade tension improves cutting efficiency and reduces the risk of failures. The automatic stop function after completing the cut eliminates operator errors and increases workplace safety. The combination of a rigid structure, precise blade guidance, and controlled hydraulic feed guarantees reliable performance in demanding applications. Applications The CORMAK S200R metal band saw is ideal for: industrial production plants, metalworking and fabrication workshops, steel construction companies, maintenance departments. The machine enables precise cutting of: carbon steel, stainless steel, tool steel, closed profiles, solid metal sections. Standard Equipment Mechanical quick-clamping vice Hydraulic cylinder with smooth descent adjustment Blade cleaning brush Coolant pump with closed circulation system Length stop with measuring scale Optional Equipment Material feeding roller system Technical Specifications Parameter Value Machine type Manual metal band saw Cutting method Gravity feed Blade speed 36 / 70 m/min Cutting angle range -45° to +60° Vice type Manual Saw blade dimensions 27 × 0.9 × 2910 mm Motor power 1.8 kW Vice base height 890 mm Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Machine dimensions (L × W × H) 1600 × 800 × 1400 mm Weight 500 kg

Condition: used, Year of construction: 2022, functionality: fully functional, type of input current: DC, cutting height (max.): 285 mm, actuation type: manual, overall weight: 440 kg, saw band length: 2,950 mm, saw band width: 27 mm, Equipment: documentation/manual, For sale from our warehouse location: Albert-Proeller-Straße 9a, 86675 Buchdorf MEP manual bandsaw machine TYPE: SHARK 282 CCS Motor power 1.5/1.8 kW Table opening 285 mm Band dimensions 2950x27x0.9 mm Weight 440 kg Speed 36/72 m/min Iodjy Uwuuopfx Akxsba Cutting capacity at 0° 250 / 220x220 / 280x220 Cutting capacity at 45° right 230 / 200x200 / 220x200 Cutting capacity at 45° left 200 / 170x170 / 200x140 Cutting capacity at 60° right 120 / 80x80 / 140x80 Cutting capacity at 60° left Accessories: - MD 12 micro-dosing device MINI-GF - EL-1/2-2L - Conveyor roller table, type K 110

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 220 x 200 mm capacity 45 degrees: square 200 x 200 mm Ibedpfx Asxabpwjkxja capacity 60 degrees: flat 140 x 100 mm capacity 60 degrees: square 100 x 100 mm capacity 60 degrees: round 110 mm vice 285 mm turning speed range: 36/72 m/min saw band length 2.950 x 27 x 0,9 mm total power requirement 1,5/1,8 kW weight of the machine ca. 440 kg. dimensions of the machine ca. 1620 x 1360 mtr. Equipment: - robust electro-hydraulic band saw (INDUSTRY) - large bearing-mounted rotary table * for miter cuts from 45° right to 60° left - automatic saw bow lowering * with continuously adjustable feed * limit switch at the end of the cut - manual cutting function selectable - saw band guide made of hard metal plates - 1x saw band - 1x angle stop - moving chip removal brush - control panel - front right - hydraulic pressure box for saw band tension * with analogue pressure display (manometer) - machine base frame with forklift pockets - operating instructions in German SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a Isdpfx Akeywd I Tjxsba wall cabinet.Designed for: Installation dimensions: - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: good (used), Year of construction: 2021, Mitre cuts up to 60° left and 45° right Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Iodpfeyuyb Nsx Akxsba Infinitely variable band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 420 kg Ball-bearing rotary table Quick-release vice Large material support Coolant system Including: Infeed roller conveyor 2x2000 mm Measuring unit 4000 mm on the discharge side with digital display

Condition: excellent (used), Year of construction: 2010, Kasto Functional A horizontal band saw Year: 2010 Technical details: max cutting diameter 260 mm saw band length 3830 x 29 x 0,9 mm cutting speed 19-100 m/min total power requirement 2,2 kW weight of the machine ca. 860 kg dimensions of the machine ca. 1550 x 1700 x 1480 mm vice opening 300 mm angle cutting left/rigt: 45degree/60degree Kasto Compact Control - colour touchpad screen Frequency controlled saw drive Infinitely adjustable cutting feed Hydraulic clamping vice Material feed Coolant system Speed control Ibodpjy Urz Nefx Akxsa c/w roller conveyor, saw blades, documentations

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, filter area: 160 m², Equipment: documentation/manual, NESTRO Extraction System Year 2022 – Modern Industrial Installation – Top Condition NESTRO Extraction Jet NFHSU 11125, 160 m² filter area, incl. 2x electric diverter valves, excl. spark extinguishing system, year 2022 Ibodpfxjywfl He Akxsa Description For sale is a high-quality, modern extraction system from NESTRO Lufttechnik GmbH, built in 2022. The system comes from an industrial environment and is accordingly in a very good, well-maintained condition. Thanks to its recent year of manufacture, it offers the latest technology, high energy efficiency, and state-of-the-art control components. 👉 Ideal for joineries, woodworking, manufacturing businesses, and industrial applications where dust and chips are generated. Key Technical Data (Excerpt) Manufacturer: NESTRO Lufttechnik GmbH Year of manufacture: 2022 Duct diameter: Ø 300 mm Electric diverter valves included Motor power diverter valve: 0.12 kW Operating voltage: 400 V Frequency: 50 Hz Robust industrial design Scope of delivery - Filter plant / filter housing - Fan / negative pressure fan - Control system (incl. modern control components) - Piping and components (as per inventory) - Diverter valves - Steel structure / installation Condition ✔ Year 2022 – very modern condition ✔ The system has been in use and is proven ✔ Well-maintained overall system ✔ Inspection possible any time Special Features ✔ Very recent year of manufacture ✔ Premium manufacturer (NESTRO) ✔ Modern control technology ✔ Energy-efficient and future-proof ✔ Significantly cheaper than comparable new equipment ✔ Ideal for rapid integration into existing operations Important Notes Sale is made in the current condition Dismantling and loading by purchaser Support for dismantling can be organized upon request Sale without warranty Condition / Warranty The machine offered is sold as used equipment. The sale is under exclusion of any liability for material defects. The machine is sold as inspected and without any warranty. The seller does not guarantee functionality, performance, or suitability for any particular purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages resulting from injury to life, body or health, or to grossly negligent or intentional behavior by the seller. Dismantling and Transport Dismantling of the machine is the responsibility of the buyer at their own expense and risk. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Risk passes to the buyer at the latest when dismantling or loading begins. Other Provisions No liability is accepted for hidden defects. All information on the machine (e.g. year of manufacture, operating hours, technical data) is given to the best of our knowledge but without guarantee.