Bandsaw automatic

MEP Shark 320 AXI

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system -Transport dimensions: 3 meters -Weight: 1300 kg Guedsy Hu H Eepfx An Eei

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm Gedpfx Asz N Dhten Eoui • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V Gusdogvkktjpfx An Eei total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, Year of construction: 2026, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors Godpfedf Ud Sjx An Eeui A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 Gujdpfjrb Akmex An Eoi - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing) Guedpfst U Uiaox An Eei

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Guodpfxjpag R Re An Eei Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: ready for operation (used), approx. 120 pieces = 480 running meters of safety conductor rails Godpfod Hurbex An Esui Number of conductors / number of poles: 5 in standard lengths of: 4 m Busbar cross section: 10 mm² for mains voltage up to: 500 V Load capacity at 100% ED: 60 A Weight per meter: 2.1 kg

Condition: new, messurements (LxWxH): 3.600 x 1.120 x 1020weight approx.: 2.400total power requirements: 4prebending: 5sheet thickness: 6sheet length: 2030 Gujdpfxjd Ab Hae An Eji

Condition: used, Year of construction: 2013, operating hours: 51,438 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle motor power: 34 W, spindle speed (max.): 4,000 rpm, spindle bore: 102 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 40 m/min, type of input current: AC, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, total height: 2,670 mm, total length: 7,601 mm, total width: 4,215 mm, spindle nose: 220h5, overall weight: 24,000 kg, Equipment: documentation/manual, Control system: Siemens 840D sl with ShopTurn Year of manufacture: 2013 Spindle hours: 16,310 Location: Germany Equipment: -Main spindle ISM 102 -Counter spindle ISM 102 -Milling spindle HSK63A 12,000 rpm -Eccentric turning and milling -Milling of gears using the involute method -Easy Tool Monitor for Siemens control system -Chuck flushing system, external -Chuck flushing system, counter spindle -Differential pressure monitoring for H-spindle Gusdpjz Tc Tpsfx An Eei -Differential pressure monitoring for C-spindle -Coolant supply through the counter spindle -Partially hollow chuck, Ø 104 mm -Tailstock function for the counter spindle -Rest support for rest 30-245 mm -Rest slide, NC-controlled -BFA 8/20/80 bar, 980 l, cooler -Hinged belt chip conveyor -Automatic sliding hood, electric -Tool measuring device -Chain magazine for 120 tools HSK63A -Signal light, 4-way -Cleaning of the safety glass -Coolant spray gun -Control cabinet lighting -Oil mist separator Including the following overhaul/repair measures: -General overhaul of main spindle S1 HSK 63 12,000 rpm -Replacement of safety glass -Replacement of hoses (pneumatics, cooling system, CNC)